Password action doesn't want to work on Windows browsers

As a few others have noted in this forum, the Password action which is (or was) provided with GoLive CS2 does not seem to work with IE7 browsers (or other browsers on Windows). When the user clicks on a link which contains the Password action, their browser jumps straight to the "You have not entered a password" or "Password incorrect" (I don't know the exact message because I'm on a Mac) without prompting the user to enter a password. Is there a replacement or fix for this action? (By the way, it still works perfectly on a Mac with any browser!)

In article <[email protected]>,
[email protected] wrote:
> As a few others have noted in this forum, the Password action which is (or
> was) provided with GoLive CS2 does not seem to work with IE7 browsers (or
> other browsers on Windows).
I don't have a fix for you, but I can point you at an alternative method
that works in *all* browsers using a .htaccess file.
Michael has an easy to follow tutorial for GL users here:
Cheers Martin

Similar Messages

  • CS3 doesn't want to work any more

    Hello,
    I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
    What can I do ? Help !
    Thanks.

    Thanks a lot. That worked for me too. I was afraid that CS3 had changed into
    a pumpkin this morning.
    virginie
    Le 22/11/13 13:25, « De Mostertman » <[email protected]> a écrit :
    Re: CS3 doesn't want to work any more
    created by De Mostertman <http://forums.adobe.com/people/De+Mostertman>  in
    Photoshop General Discussion - View the full discussion
    <http://forums.adobe.com/message/5865197#5865197>
    I had my CS3 freezing this morning on startup. I hope you didn't reinstall or
    anything bacause the sollution is quite simple: What helped me was restarting
    Photoshop with the internet cable pulled out. Apperently it was freezing on
    the registerscreen, and by removing the internet cable I surpassed that
    screen, to see another screen.after that i could start it up again with the
    internet cable plugged in again.
    Please note that the Adobe Forums do not accept email attachments. If you want
    to embed a screen image in your message please visit the thread in the forum
    to embed the image at http://forums.adobe.com/message/5865197#5865197 Replies
    to this message go to everyone subscribed to this thread, not directly to the
    person who posted the message. To post a reply, either reply to this email or
    visit the message page: http://forums.adobe.com/message/5865197#5865197 To
    unsubscribe from this thread, please visit the message page at
    http://forums.adobe.com/message/5865197#5865197. In the Actions box on the
    right, click the Stop Email Notifications link.  Start a new discussion in
    Photoshop General Discussion at Adobe Community
    <http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerTy
    pe=14&container=4694>  For more information about maintaining your forum email
    notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying this page

    Hi i have an ipod A1099 but it doesn´t want to work, when I try to charge it, its present the apple on the screen and then post a message saying to visit apple support. Please help me, I don´t want to loose my ipod.

    Hi thenicegirl07,
    It sounds like your Click Wheel iPod is showing a sad iPod icon. If it will go into Disk Mode you may be able to restore it, take a look at the article and quote below for more information about the alert and possible resolutions.
    iPod displays a sad iPod icon
    http://support.apple.com/kb/ts1373
    Resolution
    In most cases, the sad iPod icon indicates a hardware issue. If you are able to force iPod into Disk Mode, then it may not be a hardware issue, and you should try to restore your iPod with the latest software.
    If you cannot force your iPod into disk mode and restore it, then your iPod is in need of service. Set up an iPod Service Request or make a reservation at the Genius Bar before visiting your local Apple Retail Store. To make a reservation:
    Go to http://www.apple.com/retail/storelist/.
    Choose an Apple Store location.
    Click the Reserve link under Genius Bar.
    Choose iPod.
    Select your desired reservation date and time.
    For an easy to follow QuickTime movie, view the Troubleshooting & Extras section of the iPod Tutorials atwww.apple.com/support/ipod/tutorial.
    Additional Information
    iPod displays a folder icon with an exclamation point
    -Jason

  • My iPad air charger doesn't want to work

    After less than 7 months from buying my iPad air, my charger doesn't want to work, my iPad is not chargin. Do I need to buy a new one?

    No, you need to get the charger replaced under warranty.

  • HT4623 i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

    i was updating my iphone 4g then i stoped in the middle of the update now my phone was crazy it doesn't want to work again what should i do

    Google "iPhone DFU Mode". Put the phone in DFU mode and restore it.

  • TS2771 my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    my itouch 4th gen internal speaker doesn't want to work. what can i do to fix it? help please!

    - Try inserting/removing a earphone plug a dozen or more times.
    - Reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be a bad headphone jack.

  • My 'app store' doesn't want to work, i open it and see my last action but the screen stays the same ... (i'm dutch)

    Hello,
    My 'app store' doesn't want to word, i open it and see my last action but the screen stys the same, i cannot select something ...
    (i am dutch - belgium)
    Best Regards

    If you have the HP 2605dn printer attached to the 802.11n AirPort Extreme Base Station (AEBSn) (or any router) by Ethernet, then the AEBSn is NOT performing as a Print Server. Instead, the printer itself would have to be configured to provide this service.
    I don't have this particular printer, but I do have a network-ready HP Officejet model that I have my network clients (Macs, PCs, & even Linux) connect to. The key is either using the unit's interfact panel to configure the appropriate network settings specific for your network.

  • My facetime suddenly doesn't want to work... :(

    Hi, I've been using facetime for how many times already but when i wished to use it again, it doesn't want to activate. what could possibly the reason? should i contact my network?

    I was able to use FaceTime before, and some "glitch" happened and I was unable to so I did do the restore. I even went to the Apple Store to figure it out and that's all the guy told me to do was to restore it. Actually he did it for me, but I believe a restore will help. 
    You can always download your apps again for free.  But make sure you get off playlists/video/photos, use iCloud if you have the room for other stuff too.

  • Decided it doesn't want to work anymore

    I've had the iPod Remote for about three months now, and it recently decided that it doesnt want to work properly. I can adjust volume fine, but pausing and skipping tracks won't work. Any ideas?

    I don't think that there's anything you can do with the radio/remote except get it looked at by Apple.
    Maybe take it to a store near you?

  • Socket.close doesn't work in Windows browsers?

    I've been trying to figure this out for days and I can't seem to find anything on why this is happening or how to fix it.
    I have an FTP program written that uploads ByteArrays through sockets.  It works great on my Mac!  I open a command connection, then a data connection, send the ByteArray and then use socket.close() on my data connection.  This causes the server to disconnect me and sends the 226:transfer succeeded message back through my command connection.
    The problem is that in IE8, FF 3.5, and Safari 4 on Windows the socket.close() func does not make the server close the connection.  The fact that it works in all of my Mac browsers, and the IDE, but not in Windows browsers makes me think that it's something to do with the Flash Player.  Is this possible?
    My FP version check data:
    MAC 10,0,32,18
    WIN 10,0,32,18
    Does anyone know how I can fix, or even debug, this?

    does anyone have any idea what could be going on here?  am i completely out to lunch?

  • Audio Not working in Windows Browsers

    I have a flash site that was designed using Flash CS3... this site contains an audio that starts playing in the background as soon as the person lands on the home page. This past week, I changed out the leading image and repackaged the site using Flash CS4. Now the audio works in Mac browsers (Safari and FireFox), but not in Windows browsers (IE and Firefox)... any ideas where to begin in trouble shooting this?
    the site: http://thesunshinefactory.com
    Note: there is a on/off toggle in the upper left corner... (also, I inherited this flash design so, I'm still digging through all the layers - let me know if I need to provide code)
    Thanks.
    Jill

    On Linux you need proper GStreamer support to play mp3 files with the HTML5 media player.
    *media.gstreamer.enabled = true
    *Bug 794282 - Enable GStreamer in official builds

  • HT4113 Simple Passcode doesn't want to work... :-/

    Hi Guys,
    I have a quite annoying problem on my iPhone 3GS, Simple Passcode doesn't work on my device.
    I can switch Simple Passcode to on state while passcode is off, (that is passcode is still disabled and not used)  but when I turn passcode on the state of Simple Passcode switch jumps back to off state after all.
    Do you have any solution for it?
    I would appreciate...
    Many thanks in advance!
    Norbi

    Hi Chris,
    Yes, it allows to enter a simple passcode, but when I set it and get back the passcode settings page simple passcode goes to off state again and next time when I want to unlock my phone it asks my 4 digits with fully keyboard instead of numeric.
    So it means that I can not switch on simple passcode but strong even if I stand on my head too...
    I've already tried it on another phone (our compan phone) and it works flawlessly as it should, but mine... makes me crazy.
    Thanks for your reply in advance!
    Best regards,
    Norbi

  • Bluetooth just doesn't want to work

    I have a new mac pro that I am trying to sync with my mac book pro. For some reason, neither computer seems to find any other bluetooth capable machines. Both have the bluetooth on and are discoverable. Anybody know what's going on? I also have a lot of contacts on my LG V phone which I would love to get on the new computers. My phone seems to recognize my computer but then it doesn't seem to want to sync anything. Anybody have ideas for me? Thanks.

    Ok, i`ve installed blueman and everything works...

  • Truecrypt doesn't want to work

    I'm trying to setup a truecrypt volume on a 60gb partition. Following the wiki to make a hidden volume, I'm getting stuck at mapping the volume.
    # truecrypt -N 1 /dev/sda2
    Enter password for '/dev/sda2':
    device-mapper: reload ioctl failed: Invalid argument
    Command failed
    In my dmesg there's the following:
    device-mapper: table: 254:0: truecrypt: truecrypt: Device lookup failed
    device-mapper: ioctl: error adding target to table
    device-mapper: ioctl: device doesn't appear to be in the dev hash table.
    truecrypt is loaded _until_ I try to map it, then the module unloads itself.
    I used the following to create the volume:
    # truecrypt --type normal -c /dev/sda2
    and picked the defaults. I am not using a keyfile.
    Any idea how to get this working? I'd try remaking it, but it took an hour (at 100% CPU, couldn't use computer) and I'd like to see if there's isn't some easy fix I missed before I do that.

    A small update:
    I tried remaking using different settings, and while it took longer (about 3 hours)... still no go, same error.
    Am I the only one that has ran into this issue with truecrypt?

  • Locked screen music controls doesn't want to work for 'remote', Why?

    When the screen is locked and you double tap on the home button, basic music options display, it's the top dar of the music app. This function works perfectly with the music app but the remote app by apple to control iTunes doesn't seem to be compatible, it seems stupid but possible. I just want to make sure I'm not missing anything, and that its not just me and my iPad.
    Thanks

    I know how the remote app works and how the locked screen works .But that's exactly what I said, the remote app will not control anything on the iPad. It only controls the iTunes library on your computer.
    it wouldn't matter if you could get to the remote app with screen locked - even though you cant because it will not control the Music app on the iPad.

Maybe you are looking for

  • DVD will not start up?

    I insert the disk I wan't to play, and the iMac  Super Drive will not start. It accepts the dvd. makes noise like it wants to start, but then makes a winding sound, stutters a few times, then makes the sound as if a dvd was re-inserted, but then it g

  • RV13B is not defined in the ABAP dictionary

    Hi Experts, Iu2019ve a requirement to create a smartform,and then save it as a pdf and email. I have all of this done except for one part. At present my email address (for testing purposes) is hard coded as the email address. However I want to automa

  • Print program and output type, form layout

    Hi all Where I can see output type for Account Statements.  I cannot find it in NACE. Regards Mona.

  • Why i have to double click on icons to open?

    why i hace to double click icons on my iphone 4s?

  • Re-saving photos in my library as a smaller size

    is there anyway to select multiple photos and re-save them as a smaller size [some of my photos are 3-6mg and i don't need them to be that high of quality.] any thoughts/ideas?