Password code to access the PSTN

Hi all
I have a CCME ver4 in a router 2811 with 4 fxo ports to PSTN and 20 ip phones.
I need establish password code by users to have different type the access to the PSTN (local, LD, LDI), and that the phone number and code password appear in the report call history, to control the users.
The router have a COR configuration but work by phone and not by user.

There seem to be a TCL script in CME 4.01 ( i have never seen this script yet) according to this link, that can authorize pins and if pin is valid, the call is allowed.
FAC script can check the pin with an external Radius server.
http://www.cisco.com/hk/learning/showcase/files/Depolying_CME_and_CUE_Deployment_Management_Security.pdf
PS:please remember to rate posts!

Similar Messages

  • HT201304 I can't remember the four digit code to access the Restrictions settings.  Is there a way of resetting it?

    I can't remember the four digit code to access the Restrictions settings.  Is there a way of resetting it?
    I set restrictions on a child's iPod and can't remember the code to change them.

    Apple Unsavvy wrote:
    Thanks.  Do you know how many attempts I get before the iPod locks?
    No, but you will probably be warned.  Also if you happen to have a backup from before you set your Restrictions you can do a restore from that backup.  But if the latest backup was done after you set the restrictions, you are out of luck.

  • Password to access the PSTN

    Hi all
    I have a CCME ver4 in a router 2811 with 4 fxo ports to PSTN and 20 ip phones.
    I need establish password code by users to have different type the access to the PSTN (local, LD, LDI), and that the phone number and code password appear in the report call history, to control the users.
    The router have a COR configuration but work by phone and not by user.

    Hi Brandon
    I need establish authorization code in the callmanager express or something similar.
    I try establish this autorization code with a dial-peer, but not work.
    example
    dial-peer without code
    dial-peer voice 100 pots
    destination-patern 01........
    forward-digits all
    port 1/1/1
    dial-peer with code
    dial-peer voice 100 pots
    destination-patern 99901........
    forward-digits 12
    port 1/1/1

  • Can I setup username(s) and password(s) for accessing the form?

    Dear all,
    As the title states, is it possible to restrict the form access to certain people by setting up usernames and passwords?
    If not, what would be a suitable (and similar) alternative to using quick reporting forms in a company environment that would allow trend analysis?

    Thank you for your response,
    True as it may, I don't want anyone accessing the form except those authorized. For example, even though the form access can be limited by controlling the dirstribution of a URL, a quick google search of "incident report formscentral" produces a link to the Columbus School District Bully Incident Reporting Form on the first page of results!
    In order to limit access, is it possible to Only embed the form on other websites (ones that require authentication), or to only use the PDF version of the form, allowing it to upload the data to formscentral?

  • TS3048 My Bluetooth wireless keyboard is not paired with my imac and I cannot my password in to access the iMac

    I unpaired my Bluetooth keyboard and paired it with my iPad. When I went to re-pair it with my imac, the log in screen appeared, telling me to enter my username and password to access the computer. Obviously, I cannot do that with having a paired keyboard. How do I pair the Bluetooth keyboard when I cannot enter my password?

    Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off.  Later, when I tried the keyboard again, it worked.  I guess the bluetooth process takes longer than expected.  So thank you for taking the time to help a technically impaired person!!

  • My password can't access the computer again

    Hello,
    I've been using my notebook for over 3 year and I've only change my password like four times because I'm not good with passwords.
    Something strange happen just now when I put on my notebook, normally when it comes up I will enter my normal password. Now the password I've been using for over a month is not working for it anymore its only telling me "incorrect password" or reset.
    I don't have a reset disk too and I've tried all my recent passwords it not still working.

    Hi there @teefantastick01,
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are having trouble logging into your computer, due to a problem with the password. I am happy to help you with this.
    Please look through the following page, that offers several methods you can try.
    HP PCs - How to Recover Your Lost or Forgotten Password (Windows 7)
    The last options on the page will give you access to your computer again, but you will lose any data as well, so review the page carefully, to understand what could happen.
    I hope this helps.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • How can I over ride the combination code to access the volume limit?

    I want to increase my volume limit but there is a combination lock that shows up and I dont know what the code is! Is there some way I can over ride this and increase my volume limit? It's hard to hear any music.

    The only way to bypass the volume limit passcode is to restore the device to factory settings in iTunes.
    Restoring iPod to factory settings
    B-rock

  • Java code to access the SLD

    Hi,
    I'm writing a java application that needs to connect to the SLD Server and then query and return data about the SID and available instances and associated database(s).
    I have figured out the connection piece using  SAP_JCODestinationAccessor, but have not figured out how to get the SID and instance names.  It appears that the methods I want to use are in the lcrclient.jar file (perhaps SAP_ApplicationSystemInstance?
    Are there any code example or javadocs that are available to help me understand the methods that are available for data retrieval from the SLD?
    Thanks in advance,
    Tammy

    Hi,
    Yes, the examples are where I got my start from.  In general my problem is that I didn't have an JCO's defined, so no data was being returned. Thus the example only helped me minimally.
    I'm assuming that when not using a JCO, I still can make a connection to the SLD Server and then using the CIM objects be able to retreive the SID and associated instances.
    Tammy
    Tammy

  • What happens if you forget your password code lock on the ipod touch main screen? how will u no what it is if u forget?

    what the title says

    You connect the iPod to its syncing computer and restore via iTunes. If iTunes asks for the passcode and you can't enter the passcode or if you do not have the syncing computer you place the iPod in recovory mode and then restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HT4623 Help - new iOS requires pass code to access iPhone, never had one

    Updated my iPhone 5 with iOS 7 yesterday, never had used a 4 digit pass code to access the phone.  Now, cannot open the phone to use as I don't have any pass code. What should I do to fix this?  Synch to computer and lose data?  Go back to using a land line?
    Thanks in advance for your help

    There's no default password.
    Connect your iPad to iTune (computer) and do a restore.
    http://support.apple.com/kb/ht1414

  • Accessing the global Address List using Java Outlook Connector

    Hi All,
    I have written a code to access the Global Address List using (Jar) in Java outlook Connector
    However i am able to retriev the name and email address of that employee only.
    I want the other details like location(particularly).
    Please help out.
    Thanks,
    Arijit.

    Ari_Dev wrote:
    The scenario is i am an employee and i want to get information regarding other employees(name,location) which are stored in outlook through my java application(using JOC).Just a point of clarification, there is no actual java code in the Sun Outlook Connector. The use of Java with most of our products names is for marketing/branding purposes only.
    Now there are employees who are not stored in my address book or local contacts.For them when i try to read the GAL i can get only their name and email address.So the 'cn:' (name) and 'mail:' (email address) attributes are being provided by the directory for a GAL search.
    however if i try displaying their details using the JOC it comes with proper information through the outlook pop up but cannot read this data.As I said in my previous response, the data that the Sun Outlook Connector provides in the GAL view is determined by the user that the GAL binds to the directory server as, plus the restrictions that user has on the information the directory server will provide for GAL searches/queries.
    This bind user is usually different from the 'super-user' bind user that UWC/Communications Express uses which is why you may see more information in UWC/CE compared to in the GAL in Outlook.
    Therefore you need to work with the Directory Server administrator to increase the information that the Sun Outlook Connector user is able to see.
    Regards,
    Shane.

  • In java ,how to access the  user-defined type of pl/sql?

    in my application,i using the following code to access the pl/sql type self-defined,but it throws run-time exception,how can i resolve it?String sqlStr="{call BossStat.dunStat(?,?,?,?,?,?)}";
    OracleCallableStatement ocstmt=(OracleCallableStatement)conn.prepareCall(sqlStr);
    int paramIndexInt=1;
    ocstmt.setInt(paramIndexInt++,100);
    ocstmt.setInt(paramIndexInt++,1);
    ocstmt.setInt(paramIndexInt++,1);
    ocstmt.setTimestamp(paramIndexInt++,new java.sql.Timestamp(System.currentTimeMillis()));
    ocstmt.setTimestamp(paramIndexInt++,new java.sql.Timestamp(System.currentTimeMillis()));
    ocstmt.registerOutParameter(paramIndexInt++,OracleTypes.ARRAY,"BossStat.TP_STATLABELVAR");
    ocstmt.execute();

    You can have a look at this how to document
    http://otn.oracle.com/sample_code/tech/java/codesnippet/jdbc/objects/ObjectTypes.html
    You can apply similar concept if you want to use stored procedure.
    If you still get problems, post the type that you have created and the error you are getting.
    Chandar

  • How to access the SAP MDM destinations using mdm java api in 7.1

    hi,
    I have SAP MDM 7.1 SP11 and SAP Portal 7.3 and developing the custom webdynpro application using the  JAVA MDM API. I want configure the SAP MDM destinations in SAP Portal .
    How to access the MDM destinations in java code using API? and how to create the connection with MDM using the MDM destinations.
    Please provide the code for access the SAP MDM destinations in java code using MDM java api and creating the connection to MDM.
    Thanks

    Jun,
    Thanks for the reply and api information.
    I have got this api information from the following sap documentation. But i am looking for the code by implementing this class and creating the mdm connection.
    Creating an MDM Connection Using Java Code - SAP NetWeaver Master Data Management (MDM) - SAP Library
    if any thing can you share it.
    Thanks

  • I'm having trouble using my redemption code to access Lightroom?

    Can any one help I am having trouble using my redemption code to access the download of lightroom

    i am having the saame trouble with my audio book.  I can get music but no longer my book. and it makes me mad. help me too.

  • Can I access the list of virtual channel names in VB

    I have a PXi chassis with about 100 different sensors attached on various SCXI modules, I have created a unique virtaul channel for each.
    I have no problem using these names in my code to access the data.
    I would like to create a diagnostic panel in my application from where I can access any of the channels via a drop down combo.
    Is there a method of getting reading the virtual names that I have created in MAX?
    Graeme

    It sounds like you are probably using the CWDAQ ActiveX control in VB6. In that case, unfortunately, there is not a way to get this information.
    If you are using DAQmx, you could use the C API or LabVIEW or CVI to get this information, but it is not yet supported in the .NET or C++ APIs. If you need more information on calling C functions from .NET or C++, please post a reply to this message.
    Tony H
    Measurement Studio

Maybe you are looking for