Password Complexity problems on fresh install of Server 2012 R2, This has not been answered before....

Hello all,
I have a problem that I can't find the solution to. I have found others with the same problem but the answers provided to them were not the exact situation I am in currently. Please read all the text and see if you can answer this...
I downloaded a copy of Windows Server 2012 R2. I am installing it on a stand alone PRE OWNED server which is a Dell R900 quad quad core server with 16gb ram and 500gb drive. The drive has been initialized and configured perfectly and windows server has been
loaded.
Upon the start of it, the screen appears that tells you to change your password for the admin account. Upon putting ANY (and I do mean ANY) password in there regardless of the complexity, the machine comes back with ..." The password you typed does
not meet the password complexity requirements set by the administrator for your network or group. Get the requirements from your administrator, and then type a new password."
I have tried new drives with no luck, I have tried everything that one can try on this (except the right thing of course). My guess is that the machine retained some crazy complex password file and stored it in an EEprom on board. If this was a factory fresh
machine, I would guess that this wouldn't be an issue as there was no file created yet that the machine is running it's scripted denial from. So... Does anyone have the exact method for eradicating this file or changing the domain controller or file that
controls this complexity problem WITHOUT HAVING TO LOG INTO THE MACHINE since as I said, you can't log into it. I even tried to go in through Linux to find the password in the SAM and since it's a new copy of windows, and there is no passwords in there, it
couldn't find the file since the admin acct wasn't set up yet (but that domain controller is working it's butt off and keeping me out I tell ya! lol)
Any help would be appreciated more than you know! ...Scott

Hello Phillip,
Thanks for the reply! Yes, the drive was put in the machine with no other drives (500gb SAS) and installed/initialized without incident. The DVD was put in the DVD drive and the OS was installed on the machine. As the machine starts up again after
install (reboots) the text comes up that says that you have to change the password on the administrator account due to this being the first install of the OS. I put in a password, and then put it in again, then get the statement about the password being entered
doesn't meet the complexity level set on the domain controller and to contact the admin of the network. I then looked up what that was referring to and used a series of passwords that should have worked as they matched the exact complexity that windows stated
in their tech knowledge base. Such as ... P@ssw0rd and another like Pass\/\/0rd!! as well as quite a few others with various names and symbols. Each time meeting or exceeding the 8 chars with upper and lower case with symbols
present. Each and every time that complexity statement in yellow comes up.
I tried changing and initializing 2 more disks and downloading another copy of windows server 2012 R2 and tried it all again. Still the exact same thing. I have never seen anything like this before. I have installed windows server 2003 and 2008 in the past
many times without errors like this but this one really has me beat as to what is wrong.
I read a tidbit on a way to go to DOS and take some files from the DVD and copy them to certain locations on the drive the OS is installed on. That is supposed to write over the files that provide the complexity issues but where ever I saw it, they didn't
go into detail as to what exactly to do. I know others have had the same problem in the past but every answer I can see either doesn't address the question or provides the wrong answer altogether.
That's why I am posting here in a last ditch effort to save this project since the same exact problem is happening when I tried to install windows server 2008 R2 as well. I thought I may be able to just go with 2008 and get that running without the issue
but when I wipe the drives completely, and reinstall onto the drive the 2008 version, the exact same thing comes up.
If you have a solution, I would love to hear it! Thanks again...Scott

Similar Messages

My ipad will not connect to wi-fi. I lost it after updating os7. Friend got it to work in CA but coming home to AZ it will not connect. Another thing why are they asking for password when I try to pick location, to my knowledge this has not been asked

I have a problem with my wi-fi cant get to work, I will pick a server then they ask for a password, to my knowledge this has never been asked in the past/ This happened with I installed OS7. A friend in CA was able to connect but when I returned to AZ I have not been able to setup the Wi-FI.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Fresh install Windows Server 2012 R2 cannot RDP

I did a fresh install of WS 2012 R2. I enabled remote access as normal leaving network authentication on. I am unable to rdp to an administrator desktop. I then enabled pinging of the new server to make sure I can see the server. I am able to ping the server
from the WS I wish to RDP from and to ping the WS from the server.
I have installed a lot of servers and never had an issue with this.
Anything new in R2 which I'm missing?

Figured it out! Trying to RDP from outside domain, R2 has this rule disabled in Firewall.
Fixed

Fresh install of Server 2012 R2 causes inaccessible boot device on first Reboot

Hello Everyone,
Doing a fresh install of Windows Server 2012 R2 on a SuperMicro X9DRT-HF+ motherboard based server. The server is using iSCSI boot, setup detects the iSCSI disk and copies its files, finishes the "Getting files ready for installation" "Installing
Updates" phase, reboots, takes a while and eventually gives a Blue screen with Inaccessible Boot Device error. I have tried some changing options in the BIOS, I've had Nimble (storage array) support on the phone and they confirmed the setup is correct
but for some reason after the first reboot Windows can no longer find its install files and gives a BSOD.
Additional Information:
Server: SuperMicro X9DRT-HF+ (no internal disk)
Storage: iSCSI disk provided from Nimble CS220 Array
Windows 2008 R2 Server installation will proceed without any problems.
I checked the \Windows\Panther\Setupact.log / CBS.log file and there doesn't seem to be anything indicating a problem.
I have googled a number of times to find solutions but most articles reference a similar problem after installing a particular KB (which shouldn't be the case here). Need some help :)

Hey Tim,
Thanks for your reply, since the start of this post I have also installed MDT to try a different approach to installing the OS. Using MDT I have injected the Intel I350 driver into the installation so it should be restarting with the driver loaded.
The odd thing is that when the server reboots the Windows startup screen loads for about 4 minutes before it gives the INACCESSIBLE_BOOT_DEVICE error. This would indicate to me that it sees the disk and tries to boot from it but then something goes wrong.
Other than the \Windows\Panther location is there another place I should be looking for log files during this part of the Windows install? I have reviewed all the locations listed under the TechNet library article "hh824819" (I can't post
a link to the article but a google search brings it up) but I can't seem to find a log of when the server crashes what it is doing at that point.

I tried to install Quick&Clean per your Email to me, and after following instructions, why does it appear that this has not been added?

Mozilla tells me I have the latest update, but no matter what I try, the Quick&Clean feature you offered will not install in my browser with the TP icon. What can I do?

Quick&Clean feature? We do not provide support by email. It most like was a marketing email if you subscribe to their email list.

I have install adobe xPro but it is asking for serial number and this has not been issued to be

Dear Colleagues,
I have installed the adobe acrobat X1 Pro but it is asking for a serial number that is not issued to me.
How can i get a serial number for this trial document

Trials don't use serial numbers. If it asks for one, then the trial has self-destructed and there is no way to revive it unless you buy it.
Adobe trial software expired early
Mylenium

Stalled Scrolling and Other Problems- NEED HELP ASAP! HAS NOT BEEN ANSWERED/SOLVED, STILL NEED HELP.

Hello,
Ever since I downloaded Firefox 25, I have had an issue with scrolling. If there was some way to record this, I would, but at this time I cannot, so a description will have to do. If someone knows a way to record what is happening, I will gladly do it to make what I am saying easier to visualize.
On some sites I visit, scrolling will be what can only be described as "choppy"- I will attempt to scroll down, but there will be a small delay before the page responds and scrolls down. Thus, the scrolling does not go smoothly. This mostly happens on sites (tumblr pages especially) with non-scrolling backgrounds (ie backgrounds that do not scroll with the page) on them.
First off, I do not think this is a problem with any extensions, my computer, or the sites themselves. When I open the same pages in Chrome, the issue does not occur and the issue does not occur in all pages.
I have tried clearing the cookies and cache, resetting my browser, disabling hardware acceleration, checking the plugins (problem still happened even when all plugins were disabled), updating my graphics card, and disabling website colors. The first few produced no lasting result/fix, and while disabling website colors did fix the issue, it made the rest of the site/other sites (ones that were working fine) difficult/impossible to use.
One interesting fact of note is this: If I downgrade to Firefox 24, the issue not only disappears, but stays away, and does not occur.
Another fact of note: I have written a previous thread on this issue, but ended up not getting an answer to a second question I had. In the first thread, I was given this possible solution, referring to a bookmarklet I could use/try: https://support.mozilla.org/en-US/questions/976244#answer-496960
So my questions here are these:
1) What is going on in Firefox 25 that makes scrolling choppy in that version, but not in version 24 or any other browser except version 25?
2) How exactly do I use that bookmarklet I linked to? Where do I need to place it? How do I get to where I need to place it? How would it work? Is there a way to/Can someone make it into a Greasemonkey (I have Greasemonkey) userscript, if it does work?
Also, is there a way to "bump" my thread without actually commenting on it?

Bumping this. Are my questions showing up for anyone else? Because usually I get fairly prompt answers, but have gotten nothing on my last couple of threads.
I'm sorry if I'm coming off as demanding, but I would like to have this answered, and it's frustrating to not have things at least replied to.

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

Getting problem while installing Sql Server 2012

I am using Windows 8 in my system. I am trying to install Sql Server 2012 in my system .
But i am getting following error in the final.
The required MSI package 'D:\SQL Server 2012\x86\setup\sql_engine_core_shared_msi' doesn't exist.
Please, help me quickly.

Hi，
You post same question 3 times. Please avoid this practice on Forum, I
have merged the same thread into this thread . Thanks for your understanding.
In addition, as other post, you can copy the missing .msi file from the complete and unbroken installation media to your MSI package path. Then run as administrator again. And also check if your account has read and write permission for your installation
media saving path. If the error still exists, you can check the SQL setup logs (Detail.txt and summary.txt) for analysis.
There is similar issue about installing SQL Server failed due to miss the required MSI package.
http://social.msdn.microsoft.com/Forums/en-US/2aa6136b-9ccd-4c97-a6d3-cbe408c38228/sql-server-2008-service-pack-1-installation-problem
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Problem Installing SQL Server 2012

Hello, I am currently trying to install SQL Server 2012 and I'm having a problem. When I try to install a "New SQL Server stand alone installation..." from the SQL Server Installation Center, it gives me the error:
An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version=8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchit
ecture="x86",type"win32". Please refer to Help and Support for more information. HRESULT:
0x80070422.
After clicking "OK" I get this error:
Windows Installer file: C:\Users\Mike\AppData\Local\Temp\SQL Server 2012
\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup
Bootstrap\Log\20131207_210515\SqlSupport_Cpu64_1_ComponentUpdate.log
After clicking "Retry" it loads for awhile and then shuts down and I get the "Setup Stopped Working" window. Does anyone know what the problem is? How can I finish installing the software? Thanks

Hello,
Please try to manually install VC++ 2005 SP1 from the following link.
http://www.microsoft.com/en-us/download/details.aspx?id=5638
The following resources may help you too:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/a508768d-9468-41e0-9159-b66b45c39043/microsoft-visual-c-2005-redistributable-error?forum=vssetup
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/error-1935an-error-occurred-during-the/7105ee7e-ab45-4bd2-b5db-a3e9002f7f9e?auth=1
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Problem Installing SQL Server 2012 Express

Hello
I'm in the process of installing SQL Server 2012 and the install is continually failing. It reports to possibly be a problem with the package; I've tried downloading three times now and setup has failed each time. There is a link below to the install log
file which I believe will likely be more help than my attempting to describe the symptoms but please let me know if there is any additional information which would help in finding the problem.
https://skydrive.live.com/redir?resid=9ACB131B26E0E088!514&authkey=!ABuTadbr92UTFpo
Thanks in advance.

Hello,
“Error Code: 29559
The installer has encountered an unexpected error installing this package. This may indicate a problem with the package. The error code is 29559”
Let’s try to work around the issue on a different way. Please try to download the following Evaluation Copy of SQL Server 2012, run setup, and on the “Product Key” page select
Express Edition (on the “Specify a free edition” combo box).
http://www.microsoft.com/en-us/download/details.aspx?id=29066
Do you have another instance of SQL Server installed?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to install SQL Server 2012 Developer

I have a problem with installing SQL Server 2012 (no matter which edition I choose). Installation usually runs well, but near the end shows up an error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
BUTTONS:
OK
The help link points to not-existing article on MSDN page. After I click OK button, the installation reaches it's end and shows up another, which tells, that Database Engine Services, Reporting Services - Native, Data Quality Services, Full-Text and Semantic
Extractions for Search and SQL Server Replication failed to install.
After that I am able to start, for example SQL Management Studio, but cannot connect to database. Also services of SQL Server (Server, Server Agent, Full-text Filter, Reporting Services) are stopped and I am not able to start them manually (any try throws an
error: "The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details").
I tried complete reinstalling of SQL Server, cleaning registry entries, different editions of that software - none method helped. Also, I tried the .iso images of installation media on other computers - it worked well and installed without any errors. My OS
is Windows 8.1 x64.

Hello,
Please uninstall SQL server completely from add remove program.Make sure you uninstall it completely
Now right click on Setup.exe file which is there in SQL Server installable and select run as administrator to start installation.
On page where you are asked to provide startup account for SQL Server service select NT Authority\System or Local System account.
This issue is basically after installation SQL Server is not able to bring online database services using account which you selected .Local system account will allow it to come online
After installation change startup account to domain account with least privilege
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to install sql server 2012

I am trying to install sql server 2012. I need it to run a trial version of Xactimate. I get the following error during the installation process on the SQL Server Installation Center box : The feature you are trying to use is on a network resource that
is unavailable. Click ok to try again, or enter an alternate path to a folder containing the installation package 'sqlbrowser.msi' in the box below.
Use source: c:\9bc690235b2703df7a6704fa\1033_ENU_LP\x86\setup\

Hello,
Based on the following Xactware support document from two years ago (2012), Xactimate supports SQL Server 2005 and SQL Server 2008.
The document does not say Xactimate supports SQL Server 2012.
http://www.xactware.com/pdf/27/xactimate-27.5-network-install-guide.pdf
As mentioned on page #3 of the installation guide (above link), “If you do not already have SQL Server Express installed on your server,
you can use the version of SQL Server Express that is available on your Xactimate Version 27 DVD. Xactware recommends you use the Xactimate Setup—Network batch file. When you use this batch file, the Xactware instance is automatically created, the network
protocols are enabled, and the correct user name and password is set.”
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Password Complexity problems on fresh install of Server 2012 R2, This has not been answered before....

Similar Messages

Maybe you are looking for