Password configuration settings and SAP Updates

Hi,
I'll be glad if somebody could help me with the following. I'm working on GRC AC 5.1 and wanted to change the password configuration settings (to make them match the actual company policy). I'm assuming this could be done through the Web Dynpro configuration, but do not know how to change them.
Additionally, I would like to see what SAP updates have been applied to this instance. Is there a way to see this?. Wher could I find the latest SAP updates for GRC AC 5.1 and apply them? I'm also assuming this is performed through the Dynpro.
Thanks in advance

Hi Kameliya,
thanks for your reply! Unfortunately it doesn't still work. Setting to final doesn't bring any success. Perhaps the solution in the note can help.
Please give me an information if you have something new.
Best regards,
Ingmar

Similar Messages

WRT1900AC - 2118 Error on Router Settings and Firmware Update

I bought a WRT1900AC in June and it has worked great. I was able to configure it fine after buying it with no problems. I wanted to make an update recently so I logged in and found that I couldn't access the router settings. When I tried I would get an error 2118.
At first I only got the error when clicking on "Connectivity" but was able to access "Troubleshooting". I powered off/on the router and everything still worked at this point except I was now getting the error on all router setting options Connectivity, Troubleshooting, firmware update msg that would display at the top of the admin panel. I tried more reboots/resets and nothing error error error.
I contacted Linksys support and after being on the phone ALL day they deteremined that the router must be defective. I brought the router back to best buy and they gave me a new one. Now I bring this one home and right out of the box the msg I get is "Your router was not successfully setup" and the error at the bottom is error 2118. I have tried rebooting/resetting and I can never get past this screen. After a reset I have tried to choose to configure manually and am able to login to the admin panel but I get the exact same error as with the original one error 2118 on any of the Router setting options and again it is displaying that there is a firmware upgrade available but I get the error 2118 and I click on "update". I have even followed the instructions on trying to use TFTP to update the firmware but all I get is "Unable to get a response from the server".
Right now the status is my internet works and my wireless works but only with the orginal network name and password since I can't change it.
FYI - Tech support kept pointing to my browser but I have tried from several devices and same issue.
Tried from:
winxp - IE8, firefox, chrome
windows7 - ie, firefox
ubuntu 12.04 - firefox
ubuntu 10.04 - firefox
Cleared caches and rebooted on all and same issue on all. My last linksys router went 7years 0 problems, ah man this sucks if anyone can help I would be grateful.

Thank you so much for replying.
Working from win7 IE11
-windows firewall disabled
-antivirus software firewall disables
-disabled anitvirus software
-disabled browser security add-ons
-cleared browser cache & ran ccleaner
-added linksyssmartwifi.com and 192.168.1.1 to compatibility view
tried accessing linksyssmartwifi.com and am getting "Your router was not successfully setup"
tried steps when connected from wifi or LAN Port 1
Have tried the same steps but selected to configure manually so I could login with local access. I can access any of the Smart Wifi Tools but I can't access anything under "Router Settings' ie: Connectivity, Troubleshooting, Wireless or Security. I get the error 2118 so even though I have downloaded the firmware update to my desktop I can't upload to router since I can't access that page. Also if I click on the New Firmware available click here link I get the same 2118 error.
When I click on details of the 2118 error it reads:
http://linksys.com/jnap/router/GetWANStatus2 : {} -- Status: 200 OK Content-Type: application/json; ...

CIN Configuration settings and T.codes

Please, Can anyone explain about the CIN Proess in MM and important configuration of IMG settings? I would like to know the Important transaction codes used for the CIN Business scenarios. Also give some link related to CIN .
Regards,
Thiru

Hi,
***CIN CONFUGURATION***
1.1 Maintain Excise Registration
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting Maintain Excise Registrations
APPLICABLE
1.2 Maintain Company Code Settings
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Company Code Settings
APPLICABLE
1.3 Maintain Plant Settings
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Plant Settings
APPLICABLE
1.4 Maintain Excise Groups
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Excise Groups
APPLICABLE
1.5 Maintain Series Groups
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Series Groups
APPLICABLE
1.6 Maintain Excise Duty Indicators
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Excise Duty Indicators
APPLICABLE
1.7 Maintain Subtransaction Type with Text
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Basic setting  Maintain Subtransaction Type with Text
APPLICABLE
1.8 Determination of Excise Duty
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Determination of Excise Duty Select Tax Calculation Procedure
APPLICABLE
1.9 Maintain Excise Defaults
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Determination of Excise Duty Maintain Excise Defaults
APPLICABLE
1.10 Condition-Based Excise Determination
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Condition-Based Excise Determination Define Tax Code for Purchasing Documents
APPLICABLE
1.11 Condition-Based Excise Determination
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Condition-Based Excise Determination Assign Tax Code to Company Codes
APPLICABLE
1.12 Classify Condition Types
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Condition-Based Excise Determination Classify Condition Types
APPLICABLE
1.13 Maintain Chapter IDs
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Master data Maintain Chapter ids
APPLICABLE
1.14 Assign Users to Material Master Screen Sequence for Excise Duty
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Master data Assign Users to Material Master Screen Sequence for Excise Duty
APPLICABLE
1.15 Specify Excise Accounts per Excise Transaction
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Account determination Specify Excise Accounts per Excise Transaction
APPLICABLE
1.16 Specify G/L Accounts per Excise Transaction
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Account determination Specify G/L Accounts per Excise Transaction
APPLICABLE
1.17 Incoming Excise Invoices
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Incoming Excise Invoices
APPLICABLE
1.18 Define Processing Modes Per Transaction
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Define Processing Modes Per Transaction
APPLICABLE
1.19 Define Reference Documents Per Transaction
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Define Reference Documents Per Transaction
APPLICABLE
1.20 Maintain Rejection Codes
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Maintain Rejection Codes
APPLICABLE
1.21 Specify Which Movement Types Involve Excise Invoices
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Specify Which Movement Types Involve Excise Invoices
APPLICABLE
1.22 Outgoing Excise Invoices
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Outgoing Excise Invoices Assign Billing Types to Delivery Types
APPLICABLE
1.23 Maintain Default Excise Groups and Series Groups
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Outgoing Excise Invoices  Maintain Default Excise Groups and Series Groups
APPLICABLE
1.24 Subcontracting Attributes
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Subcontracting Subcontracting Attributes
APPLICABLE
1.25 Maintain Movement Type Groups
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Subcontracting Subcontracting Attributes
APPLICABLE
1.26 Utilization Determination
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Utilization Utilization Determination
APPLICABLE
1.27 Specify SAPscript Forms
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Business Transactions Excise Registers Specify SAPscript Forms
APPLICABLE
1.28 Number Ranges
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Tools Number Ranges
APPLICABLE
1.29 Message Control
SPRO  SAP Ref. IMG  Logistics general  tax on Goods MovementsIndia  Tools Message Control
APPLICABLE
For check the link:
http://www.mysaphelp.com/blog/?p=118
Regards,
Biju K

SIU "Apply system configuration settings" and Connect computers to directory servers

Good morning/Afternoon/Evening everyone.
I've currently been studying/researching imaging with OSX 10.9 server, using the SIU. As I'm going through it, one option that is appealing to me, is the "COnnect computers to directory servers:" option under the Apply System configuration settings workflow action.
The issue is that when click on the + to add a server, it only comes up with Localhost (127.0.0.1) and won't give me the option to point to my OD server for binding. Is there a way to change this, or some other option I am missing?
Also, I'm at a loss to find any setting in Profile manager that will enable/turn on "Remote management" for ARD and SSH.

Thank you for that link, it is insightful. So let me throw this into the mix:
When it comes to ARD, we have to have a local user on the local machine, in order to login, correct? It won't allow us to have OD authenticated admins/users login to the client machine. Is that correct?
If that is the scenario, then how are we to lock down a situation where we are imaging multiple macs and have the potential to have admins changing or leaving, and a need to reset local machine admin credentials. Obviously we aren't going to do this individually per machine. This would also need to be done via scripting (or ARD CLI to our enterprise), but then each image needs to be updated or all new machines need to be touched after image/install.
Am I thinking of this the correct way?
Also, is it possible to create an image that has no local user at all, or is that just nonsense?

HT4623 if you go to settings and software update is not appearing for you to update your iphone, how i can update my software, please

i have an iphone which has a problem on wifi settings and loudspeaker is not functioning

If the issue is with updating the iOS on the device, read the ENTIRE article from which the question was posted.
If the issue is with something else, be specific about the problem that is occurring.

Problems with security settings and itunes updates! What do I do?

So I preordered a cd that became available today. When I went to download it, a message came up saying that I need to download the latest version of itunes (7.-[can't remember the last part]but anyways) so I clicked on the upgrade icon. I then got a message saying "your current security settings do not allow this." No matter what I do with my security settings I keep getting this same message! I have windows xp, please help I would really really like to be able to download and listen to the cd I've paid for! Thank you in advance!

Maybe you aren't on an admin account in Windows? If not, create/logon to one and install it.
Or maybe you just need to go to the website and download it instead of updating through iTunes. Go here:
http://www.apple.com/itunes/download/

My iPhone 6 will not show battery percentage at all and keeps vibrate on even when manually turned off and yes I have reset the phone and reset network settings and restored, update etc etc

My iPhone 6 just went funny. It will not show the batter percentage anymore and the alerts are coming through vibrating even when I have switched them off. Please help! :-(

To turn battery percentage back on: Settings>General>Usage>Battery Percentage --switch on.

DB Tables for Configuration Settings

hello, I work for a Business System Department. Here, we use a data mining tool to download SAP DB tables and then we import them in a tool for Data Analysis.
I'd like to develop something automatic to analyze configuration settings in SAP (the ones in spro) but I don't know how to identify in which tables these settings are stored. eg: in which table is it stored settings related to GR reversal? and how find out about DB tables for other settings.

look for tables SDBA*
SDBAH contains header information on jobs that ran.
if this answers your question, close this message.

Configurational settings for calling HTTP from ABAP

Hi,
I need to call HTTP from ABAP.
Other than ABAP code, what configurational settings (and functional settings, if any) I need to do for this scenario..
Please help...
Thanks,
Shivaa...
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 7, 2009 3:44 PM

Hi All,
I have a problem to pass a file.txt in a parameter of a web service.
Iam using CL_HTTP_CLIENT and I am passing the parameters (user, password and file):
clear wa_form.
wa_form-name = 'user'.
wa_form-value = '33333333333'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'password'.
wa_form-value = '11111111'.
append wa_form to it_form.
clear wa_form.
wa_form-name = 'file'.
wa_form-value = data. ---> "data" is a type string with the data of the file.txt.
append wa_form to it_form.
r_client->request->set_form_fields( fields = it_form ).
I have not problem with the user and password parameters.
Thank.

Enterprise configuration: Customizing and locking about:config

I'm working within an enterprise environment, where I'm required to have certain Firefox configuration settings, and make the users unable to change them. Following guides I've found on several different sites, I've created a local-defaults.js file in $APPDIR$/defaults/pref/ with the following content:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "mozilla.cfg");
I've also created the mozilla.cfg file in $APPDIR$/ with following content:
//Firefox Settings
try{
lockPref("browser.startup.homepage", "about:blank");
lockPref("browser.download.dir", "N:");
lockPref("browser.download.downloadDir", "N:");
lockPref("app.update.enabled", false);
lockPref("extensions.update.enabled", false);
lockPref("browser.shell.checkDefaultBrowser", false);
lockPref("browser.search.update", false);
lockPref("browser.formfill.enable", false);
lockPref("signon.prefillForms", false);
lockPref("dom.disable_open_during_load", true);
lockPref("dom.disable_window_move_resize", true);
lockPref("dom.event.contextmenu.enabled", false);
lockPref("dom.disable_window_status_change", true);
lockPref("dom.disable_window_flip", true);
lockPref("dom.disable_window_open_feature.status", true);
lockPref("security.warn_leaving_secure", true);
lockPref("privacy.sanitize.promptOnSanitize", false);
lockPref("privacy.sanitize.sanitizeOnShutdown", true);
lockPref("security.default_personal_cert", "Ask Every Time");
lockPref("signon.rememberSignons", false);
lockPref("xpinstall.whitelist.required", true);
lockPref(“network.protocol-handler.external.shell”,false);
lockPref(“security.enable_ssl3”,true);
lockPref(“security.enable_ssl2”,false);
lockPref(“security.enable_tls”,true);
lockPref("plugin.disable_full_page_plugin_for_types", "application/pdf,application/doc,application/xls,application/bat,application/ppt,application/mdb,application/mde,application/fdf,application/xfdf,application/lsl,application/lso,appliation/lss,application/iqy,application/rqy,application/xlk,application/pot,application/pps,application/dot,application/wbk,application/ps,application/eps,application/wch,application/wcm,application/wbi,application/wb1,application/wb3,application/rtf,application/wch,application/wcm,application/ad,application/adp,application/xlt, application/dos, application/wks");
lockPref("privacy.item.history", false)
lockPref("
} catch(e) {
displayError("lockedPref", e);
That isn't all of the settings I have configured, but they all follow the same format - lockPref("setting", and then either a boolean or "string");
My problem is that Firefox is completely ignoring any settings places in the mozilla.cfg file. If the file isn't there, or is unreadable, Firefox refuses to start (unable to read config file). I've tried commenting out all but one of the settings (lockPref("browser.startup.homepage", "about:blank"), but I'm still not seeing the setting set or recorded in about:config. Both files are UTF-8 encoded. I've tried removing the try statement, as well as the second commented line, and commenting out individual config statements (and all but one config statement), but still no change in the browser.
Anyone know why my config changes are being ignored?

It appears that the [code]pref("general.config.obscure_value", 0);[/code] doesn't actually work, so I had to remove it from the .js file and ROT13 encode the mozilla.cfg I was using.

TS3274 Suddenly got message that my AOL password is incorrect and can't access email. Have not changed password.

Suddenly got message that my password on my AOL EMAIL IS INCORRECT and I can't access my account . I have not changed my password. I tried reenterring my password in settings and that didn't work. I shut down my iPad and restarted, but that didn't work. Please help.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

The Facebook app on my iPad will not let me access my account. I was recently married so my Facebook name changed and I updated my password. Now when I go into Facebook under settings and try to access my account it is still using the old name.

I got married, changed my Facebook name and gave my account a new password. Now, under settings and Facebook they have my ITunes/Apple ID and under it says "please sign in using (my old Facebook name) and under that is password. Only that old Facebook name has changed but did not update on my iPad settings. Also it will not accept my new password. I cannot erase it. If Apple doesnt want us to use more than one account, what do we do in this situation? Or if our Facebook gets hacked and becomes compromised? This is not okay. I have to be able to access this and because it will accept only one and will not update changes I cannot longer access my account. I buy a lot of Apple products. I won't buy another if it's not corrected. This is horribly frustrating. Not to mention waiting on youtube videos to load is almost as bad as waiting on dial-up. But that's another matter. Is there a way around this or do I need to start looking for products somewhere else? Anyone know? Thanks.

You need to reset the password for the "old" account, and then use that to turn off iCloud. Then you will be able to sign in with your new ID.
You can reset your password at iForgot.apple.com.
If you don't know the answers to the security questions, you will need to start there.
http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Tried to update an app and it asked for the password to my sister's Apple ID. I then checked to see whose Apple ID was logged in, in settings and it said that I was logged in. How do I get the app store to ask for MY Apple ID, not my sister's?

Tried to update an app on my phone but when it asked me to give the password for my AppleID, it was asking for the password to my sister's AppleID. I went to setting and down to itunes&app store settings and checked which AppleID was logged in, but i found that it was my AppleID that was logged in, not my my sisters. I then tried logging out and logging back in again but the app store, regardless of this, still asks me for my sister's AppleID and I don't know her password...How do I get the app store to ask me for MY AppleID password, not my sister's?

If this app was bought by your sister with her Apple ID, only her ID can update the app.

My iPod touch won't connect to wifi. Password is correct. Already reset network settings and restored ipod to original settings. Already updated iTunes and upgraded iPod to iOS 6.

A message keeps popping up when I try to join my network that says, "unable to join the network."
I have already reset network settings and restored ipod to original settings.
I already updated iTunes and upgraded iPod to iOS 6.
The password is correct. I even made sure by checking my wifi account.
I have completely restarted my internet connection multiple times.
I have also restarted my ipod multiple times
My wifi was working on my iPod yesterday before I reset all settings.
I updated it yesterday to iOS 5. Still didn't work.
It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
Safari still wasn't working, though.
I did the sensible thing and I reset my network connection.
Now, the password isn't working and there's no wifi signal.
The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?

are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

My IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

Yes I have put in the correct password, its all numbers so can't get it wrong really.
It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either.

Password configuration settings and SAP Updates

Similar Messages

Maybe you are looking for