Password continually rejected/requested

Since late Friday (12/13) afternoon, I have been unable to access my verizon.net account via Windows Live 2012 or Thunderbird. I can access the account via web mail either through Yahoo directly or through My Verizon. Email settings are per Verizon specs and user name/password are correct. The error message I receive is:
Unable to send or receive messages for the Verizon (******) account. An incorrect password was entered. The next time you send or receive messages, you'll be asked to enter your user name and password for this account.
Server Error: 0x800CCC90
Server Response: -ERR [AUTH] Authentication failed
Server: 'pop.verizon.net'
Windows Live Mail Error ID: 0x800CCC92
Protocol: POP3
Port: 995
Secure(SSL): Yes
The error message comes for both pop and smtp boxes. On Sunday, I was even getting a message that the smtp server could not be found.
I was on a chat session with a customer service rep for close to an hour on Sat. and all she did was reset my settings over and over to no avail. (After allowing her to see and control my screen, this person could not at first locate the properties to view the settings. I had to re-take control and open the menu for her. Sheesh).
Any suggestions or do I just have to wait this out for the Big V to correct the issue from their end? 
Thanks in advance.

Yes I was. Solution came from another member in fact. If you have a Verizon-Yahoo linked account, the SMTP and POP3 settings are different from the plain vanilla Verizon access. The settings for this type of account are:
POP3:  incoming.yahoo.verizon.net
SMTP:  outgoing.yahoo.verizon.net
Of course on any Verizon site I visited to look for an answer, there was no mention of Verizon-Yahoo accounts and the additional information needed.
Hope this works for you.

Similar Messages

  • My daughter continues to request to change the password so she can access the app. store and download stuff with out my permission. How can I block the app. store from her ipod or change it so she has no access to it?

    My daughter continues to request a new password when I change it so she can access the App. store and download stuff with out my permission? What can I do to block the app. store on her itouch or stop her from being allowed to change the password?

    Hide the App store via Restrictions. See:
    iOS: Understanding Restrictions

  • KDC policy rejects request (12) - TGT BASED NOT ALLOWED

    Hi,
    I need to change the kerberos password for the user. Since I'm not able
    to find any open source project doing this, I'm looking forward how is hard to
    implement it.
    But I'm stuck on the first message, while getting the kadmin/admin ticket:
    KDC policy rejects request (12) - TGT BASED NOT ALLOWED
    obviously because it has Attributes: DISALLOW_TGT_BASED.
    How to get this ticket?
    If you know another way to implement a kind of kadmin interface
    (without calling C code) I'll be happy! ;-)

    Ok so on investigation I can see that my 3am hackjob was worse than I thought :|
    I can see that above I have 2 different crypto maps where I thought I had combined them into one. I have now changed
    crypto map rtp 10 ipsec-isakmp
    set peer [source]
    set transform-set MY-SET
    set pfs group2
    match address 111
    to
    crypto map clientmap 10 ipsec-isakmp
    set peer [source]
    set transform-set MY-SET
    set pfs group2
    match address 111
    Still getting the same problem so I'll keep investigating but if anything sticks out let me know
    b

  • PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    PowerBook G4 boots to unfamiliar login. List of known user accounts does not appear and original admin user name and password is rejected. What is going on here?

    There are no children, nor other suspicious characters that have "played" with my computer. One moment I'm in, the next time I turn on/restart the powerbook I'm at a screen with the name of the hard drive and two fields: username and password. Not a list with pictures and names ie 'Katie Jo' with an orange icon and 'Guest' with a silhouette of a head.
    In an attempt to remedy this problem, I backed up files using target disk mode and firewire cable. I then, rebooted in single user mode, typed in the correct script and essentially made the computer appear virgin again. Original start up welcome screen display with multiple languages, and then set up prompts such as language, network, and registration. After completing the cues and the "just a few more questions" page, I press continue and am left at a grey standstill, with the continue button greyed out, and no other actions. I'm only able to "go back" by clicking the go back button, all the way to the beginning of the set up, and as I proceed through the steps a second time, I'm greeted with the same halt. What is this?

  • Lost old Apple ID password,Apple ID request/did password change,still can't access old ID

    -Went to update some iPad Apps
    -Said I had to sign in with Apple ID
    -My OLD email/Apple ID showed with the prompt for the password
    -I entered what I thought the OLD ID password was
    -Prompt said it was wrong, tried options, still wrong
    -Prompt said I could change my password
    -Changed via an email sent by Apple to my NEW email/Apple ID
    -Went back to sign into my iPad under my OLD email/Apple ID with the new password
    -Still rejected. Most likely because the password change was for the NEW Apple ID but had to try.
    -Tested the NEW password under the new Apple ID and it worked
    -Soooo....I can't get into my apps, under the requested OLD Apple ID because I don't have the OLD password and there's no way to change the OLD password without knowing it. 
    -So now I can't update important apps such as iOS Numbers, iOS Pages and the like..........
    Any suggestions.................?

    Go here, find the instructions for your country and initiate a dialog with Apple in order to get their help.
    Contact Apple for help with Apple ID account security - Apple Support

  • HOW TO CONFIGURE MANAGER or APPROVER USER IN ACCESS REQUEST MANAGEMENT TO APPROVE OR REJECT REQUEST

    hi sap gurus,
    i configured grc 10 system successfully. I created one user: GR_AR_APP001 and assign following roles:
    SAP_GRAC_ACCESS_APPROVER
    SAP_GRAC_ACCESS_REQUEST_ADMIN
    SAP_GRC_FN_BASE
    SAP_GRC_FN_NUSINESS_USER
    and I maintained GR_AR_APP001 in access control owners as "POINT OF CONTACT", "SECURITY LEAD" and "WORKFLOW ADMINISTRATOR"
    but when i am creating access request for new user and defining MANAGER under user details tab as GR_AR_APP001.
    the user GR_AR_APP001 is not receiving any request for APPROVE or REJECT in his WORK INBOX.
    can u please guide me how to configure APPROVER or MANAGER to approve or reject request.
    I will be very much thankful if you guide me successfully.

    Hi Colleen,
    thanks a lot for your time.
    PIC1: I created one user: GR_AR_APP001
    and assigned all the GRC ROLES.
    PIC2: I assigned owner type to GR_AR_APP001 user : POINT OF CONTACT, SECURITY LEAD and WORKFLOW ADMINISTRATOR in NWBC ACCESS CONTROL OWNERS
    PIC3: I created one EUP 980 (copied from default EUP)
    PIC4: I maintained default manager as GR_AR_APP001 user in 980 EUP
    PIC5: I selected SAP_GRAC_ACCESS_REQUEST process id
    PIC6: I created one agent id as ZGRAC_MANAGER11 in which I added approver user id: GR_AR_APP001
    PIC7: I saved agent id
    PIC8: I added agent id as ZGRAC_MANAGER11 in stage5 in manager stage.
    PIC9: I saved
    PIC10: I maintained EUP 980 (in which I configured manager as GR_AR_APP001 user) in stage 5 task settings
    PIC11: Maintain Route Mapping, I clicked on next
    PIC12 and PIC13: I saved and activated.
    After this process I created one request for new account and selected the manager as GR_AR_APP001 and one request is created with request no 9000000030.
    now I logged into system by user GR_AR_APP001 and checked, there is no request under his work inbox.
    please guide me at least one procedure, how to receive request in approver work inbox so that I can learn other procedures to configure approver as per our organization requirement.
    thanks for your support Colleen.

  • Jco Function issue : The initial password has expired (request a new one)

    Hi Friends,
         Could you please help me to resolve this issue. I am able to start my session using  SAP Jco Start Action block. But while invoking the BAPI using
    SAP JCo Function action block I am getting the below error. I am 100% sure that my credentials are correct. I am able to logon to ECC using SAP Front GUI.
    I am using MII 14.0 patch SP4
    Any help on this very much appreciated.
    <Rowsets DateCreated="2014-07-22T12:33:49" EndDate="2014-07-22T12:33:49" StartDate="2014-07-22T12:33:49" Version="14.0 SP4 Patch 0 (Nov 22, 2013)">
        <FatalError>JCOProxy error: Problem retrieving JCO.Function object: The initial password has expired (request a new one)</FatalError>
    </Rowsets>]]
    Thanks in advance
    Shaji

    Hi Friends,
    This issue got resolved when I cleared the BAPI list cache at MII using below URL.
    http://hostname:port/XMII/JCOProxy?Mode=Reset

  • After updating to ios 7, I am now asked to enter my password continuously when using outlook web access for my work emails. This didn't happen before, I only had to enter my password once. How can I fix this?

    After updating to ios 7, I am now asked to enter my password continuously when accessing my emails on outlook web access. Before I just had to log in and I was able to reply, save emails, etc without re entering my password. How do I fix this?

    Similar thing is happening to a relative.
    He upgraded his iPhone 5 and lost his iCloud account and all his email accounts. Major pain in the neck for a senior. And it was not a user error...unless you count the fact that he hit the upgrade button.

  • Connecting to wi-fi correct password is rejected

    When connecting to a recognized wi-fi router, the valid password is rejected. Has anyone got any work-arounds or fixes for this problem?

    Reset the router to defaults and set it up again, takes a bit longer but should work
    Are you sure that you are using the same encryption at each end (wep/wep or wpa/wpa?)

  • ITunes will not show my purchases before October 18, when I had a different username.  How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

    iTunes will not show my purchases before October 18, when I had a different username.  How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Username and password are being requested by

    I can't open my firefox browser. An authentication required message pops up saying- a username and password are being requested by https://proxyvip.econ.mpg.de:444. The site says "Radius" - What do I do to get firefox working again? i can't do anything with it

    You can check if you can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    See if you can use the Profile Manager to start Firefox in Offline mode.
    *http://kb.mozillazine.org/Profile_Manager
    Try to start Firefox with the about:blank page by creating a copy of the current Firefox desktop shortcut and add a space and <b>-url "about:blank"</b> to the target/command field.
    If that allows to start Firefox then check the connection settings.
    *Firefox > Preferences > Advanced > Network : Connection > Settings
    *https://support.mozilla.org/kb/Options+window+-+Advanced+panel
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • Ical "authentication failed. your username and password were rejected by the server"

    i've a pretty busy server, fully configured with correct DNS.
    running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
    then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
    then added the iCal service back, and set the data store to this new folder.
    authentication is set to digest (to reduce potential kerberos errors), with SSL on.
    i then started the service
    an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
    if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
    SO. WHAT IS GOING ON?
    this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
    help. please. and no comments about DNS. the fact i can get  a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

    I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
    Dare I ask...  How many users would you have to remake? 
    150 users would probably take 2 hours to recreate?
    ...Have you spent 2 hours on this problem yet?  How about 4 or 6?
    Perhaps you could have typed up 450 remade users so far!
    I have a great idea as to how to change ownership of home folders to users after they're created.
    Thoughts on the problem... (but don't spend too much time on it!)
    What about crypt vs open directory password?
    In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords? 
    ...sometimes that pull-down menu displays OD, but it's not really.  Try selecting OD, retype the password there, and save.
    See if it works.
    What about in server admin....  Select the server in question, click the access button at the top.
    Ensure that your services are allowed for all users to use the iCal service.
    In the iCal service in Server Admin...
    Host name setting?  It's a stretch as new users seem to work.  Ensure it's correct?
    For the sake of argument...  Change authentication type to Any Method...  If you're running OD on the server, Kerberos is running.  I know that certain services require it even though you have the option.  Perhaps iCal is being finiky without it?
    I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics.  It's honestly the best place to start.  Seeing as we don't know what you've done, it's the best advice you'll get.
    HTH
    -Graham

  • I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing a iPad to the iMac.  How can I reset the Software Update back to the administrator password?

    I have a situation where the administrator password is rejected when attempting a software update. I think this happened because of syncing an iPad to the iMac.  How can I reset the Software Update back to the administrator password?

    You can reset the password with the install disk.

  • An OLD INACTIVE email address, asking for a password, continues to show up to play certain selections in my iTunes Music Library.  I want to REMOVE this old email, HOW DO I REMOVE IT!!  All attempts to remove it have failed!

    An OLD INACTIVE email address, asking for a password, continues to show up to play certain selections in my iTunes Music Library.  I want to REMOVE this old email address, HOW DO I REMOVE IT!!  All attempts to remove it have failed!

    Yes, if you change your Apple ID to your new email address. You don't have to. Under those sort of situations you can speak to Apple about transferring your purchased items to the new Apple ID, and see if they will help you.
    You don't lose access to your older purchased items, you simply cannot update or re-download them or, in some cases, use them without providing the old Apple ID and password. All purchased items are permanently tied to the Apple ID used at time of purchase.

  • Mitigation still required even for Rejecting Request

    Hello All,
    Risk owner is trying to reject request (Approval status = Reject) but still it says to mitigate risk.
    Also tried to change approval status = Reject and re run risk analysis again in Risk violation table and submit the request. Here it shows no risk(Green) found but upon clicking submit request it says to Mitigate risk.
    We have maintained below under  "Display Task Settings".
    Approve Despite Risk = No
    Approval Level - System and Role
    Rejection Level - System and Role
    I don't feel we need to mitigate risk for rejection?. Please advise.
    Regards,
    Abhi

    Hi Abhi,
    Since you have Approve Despite Risk = No and I also assume that you have already removed "Request Mitigation Policy" from the path SPRO -> IMG -> GRC -> AC -> Maintain AC applications and BRF+ mapping
    Actually how the above settings work is if you have any unmitigated risk (HIGH or MEDIUM or LOW) then approver will not be able to approve the request.
    In your scenario when you change the role approval status to REJECT, even then you are clicking on SUBMIT button which is still considered as APPROVED but rejected the role. I assume there is something wrong in this behavior.
    Does your request contain only one role or multiple roles? Which roles are causing violations? Are you rejecting the role causing violations? As you said after changing the approval status and running risk analysis still your request has violations, there is something wrong in the behavior.
    Please share some screenshots for better understanding.
    Regards,
    Madhu.

Maybe you are looking for