Password Document access

I created a pdf with password access, forgot the password; how do get it open?

Not possible with any Adobe products.

Similar Messages

  • Windows 7 computers asking for network password to access shared files and printers on Windows XP PRO computer.

    I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
    same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
    Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
    The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
    7 machine or the print server XP machine.
    I would appreciate any help. Thank you

    Hi,
    Based on my research, I would like to suggest the following:
    1.   
    Disable simple file sharing on the Windows XP computer:
    How to disable simple file sharing and how to set
    permissions on a shared folder in Windows XP
    2.   
    On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
    following items are turned ON:
    Network Discovery
    File and printer sharing
    And this one is OFF:
    Password protected sharing
    3.   
    Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
    In addition,
    I would like to share the following with you for your reference:
    Troubleshoot file and printer
    sharing
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • How do I use "saved passwords" to access a site?

    I have a list of saved passwords in firefox. So what steps do I use to access the site. If I click on the saved password entry nothing happens? I want to use firefox saved passwords software. I used to use Roboform where I had a list of logins and just clicked on the entry and the username/password was entered automatically. Can firefox do this, too? If so tell me how to do it? Where's the list of logins in firefox that I can click on and have the username & password filled in from the saved list? My windows XP/pro died so I had to transfer data to Win7. Some of my Roboform data was lost so I am starting over and want to use Firefox software for username/password to access sites similar to the way Roboform works? Tell me how?

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    To see all History and Cookie settings, choose:
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    You can also check the <b>signon.autofillForms</b> pref on the <b>about:config</b> page.
    *http://kb.mozillazine.org/signon.autofillForms
    *http://kb.mozillazine.org/about:config
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I have two iPads and giving one to my grandson. Using my Apple id for both, can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

    Look at this link.
    Giving your former iPad to a spouse or family member: the quick guide
    http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

    I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
    Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
    Years ago there was a program called mail switcher which added this functionality, but thats gone.
    cheers
    Tom

    They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
    Not a great solution.
    Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

  • How can i delete an icloud account with out password or access to old email

    how can i delete an icloud account with out password or access to old email

    If the old ID ("email address) is yours, and is an ealier version of your current iCloud ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have never had to enter a password to access mail. However, recently, I keep being asked for password on my ****** address. Only on my macbook. (which, btw, has a version number the drop down doesn't offer as a choice. I had to putt 9.4)

    I have never had to enter a password to access mail.
    However, recently, I keep being asked for password on my ***** address.
    Only on my macbook. (which, btw, has a version number your drop down doesn't offer as a choice. I had to putt 9.4)
    When I look up the account the "password" is a long string of gobbledygook. Something I would never do.
    But when I attempt to use that pw I still can't get in.
    I have no trouble accessing that email account on my mac mini. Just on the macbook.
    <Edited by Host>

    Maiko,
    I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
    I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
    Destination illinois.edu.1945806043
    Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
    Destination uic.edu.1139051993
    is for my entire site ... it's my site handle. Whereas this:
    Destination uic.edu.1991288441
    is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

  • Prompt for a username/password while accessing a resource in wls 6.0

    Hi all, I want to restrict access to any resource on my weblogic
    server 6.0 and prompt for a user name and password before accessing
    any resource. I did this using weblogicurl.policy file in wls 5.1.
    I am not able to find out how to do this in 6.0. Can anyone help
    me out plz. thanx, Prabhat

    WL 6.0 doesnot support URL based access control directly but you can read on
    docs on these two links and
    they helped me to restrict access to certain url's by prompting user for
    username and password
    http://e-docs.bea.com/wls/docs60/programming/webappdeployment.html
    http://e-docs.bea.com/wls/docs60/adminguide/config_web_app.html
    "Tom Mitchell" <[email protected]> wrote in message
    news:[email protected]..
    Prabhat,
    You can restrict access to deployed resources by specifying the access
    constraints in the deployment descriptors. For things without
    deployment descriptors, you can use the console.
    HTH.
    prabhat wrote:
    Hi all, I want to restrict access to any resource on my weblogic
    server 6.0 and prompt for a user name and password before accessing
    any resource. I did this using weblogicurl.policy file in wls 5.1.
    I am not able to find out how to do this in 6.0. Can anyone help
    me out plz. thanx, Prabhat--
    Tom Mitchell
    [email protected]
    Very Current Stoneham, MA Weather
    http://www.tom.org

  • My iPhone 6 was stolen and i got it back, but the pass code was changed and so was the touch-id. and now im locked out of the phone because ios 8.1 requires either of the passwords to access the phone. and iTunes doesn't recognize it so i cant restor

    My iPhone 6 was stolen and i got it back, but the pass code was changed and so was the touch-id. and now im locked out of the phone because ios 8.1 requires either of the passwords to access the phone. and iTunes doesn't recognize it so i cant restore it at all PLEASE HELP

    Take it to an Apple Store, take proof of purchase with you.

  • How do you set up your iphone so when you connect to another computer you have to enter a password before accessing the information?

    Hi
    I just want to know how you can set up your iphone so when you connect to another computer you have to enter a password before accessing the information? My friend connected hers to my computer and it asked for a password so I know its a function.
    I have a phone password enabled so its not that, any help would be great.

    The Passcode Lock prevents syncing the iPhone with iTunes or accessing any data on the iPhone when the iPhone is connected to another computer different from the computer being used for syncing the iPhone.

  • Pop up window asks for password to access os x applications:  how to bypass necessary signing in?

    pop up window asks for password to access os x applications: how to bypass annoying signing in?

    Mac OS X v10.6: Mail.app won’t open, or "You can't use this version of Mail…" alert after installing Security Update 2012-004:
    http://support.apple.com/kb/TS4424?viewlocale=en_US&locale=en_US
    Fellow user Grant Bennet-Alder offers this solution:
    Some users have reported this problem if the Mail Application has been moved out of the top-level /Applications folder, or duplicated in another location.
    When the Security Update is done, the old version of Mail is disabled.
    The solution has been to:
    1) make certain Mail is in the /Applications folder
    2) There is no other copy anywhere else.
    3) Once steps 1 and 2 have been done, Manually download and re-apply the Security Update (2012-004) by hand.
    Security Update 2012-004 (Snow Leopard)
    If the Mail.app has been LOST, it can be re-installed by applying the 10.6.8 version 1.1 combo update. But this update is quite large and it is usually not necessary:
    Mac OS X 10.6.8 Update Combo v1.1

  • I inherited an iPod classic from the passing of a family member. I dont have any passwords to access it. I have a large itunes database on my pc, but I want to add the files on the inherited ipod to my itunes. I do not want to lose files on itunes or ipod

    I inherited an iPod classic from the passing of a family member. I dont have any passwords to access it. I have a large itunes database on my pc, but I want to add the files on the inherited ipod to my itunes. I do not want to lose files on itunes or ipod

    but I want to add the files on the inherited ipod to my itunes
    If the media was purchased from the iTunes store, it cannot be transferred to another iTunes account.

  • Username and Password Problems accessing site

    Yesterday I created a blog using iWeb 09 and published it and went with the option that visitors needed to have the user name and password to access the site. Friends and family reported that these wern't accepted and I had the same problem when I tried. Publishing and accessing using mobile me by the way. Removing the password UN option removed the problem. I have installed the latest update to the iLife 09 suite. This problem occurred to those using both mac and windows. Is this a bug?

    Make your site private and add a username and pw, then publish your site. You will get a popup when it is done publishing which gives you the option to announce your site. If you choose that option the user name and pw will be sent to those you choose. If you opt to have people visit your site, they will need the username and pw that you made youe site private with. Hope that helps.
    Smokenaxs

  • Provide developer a username and password to access the weblogic

    Hi,
    we have a weblogic server with a domain name soa_domain and a managed server instance name soa_server1.
    we have 5 developer working. Our aim is to give each developer a username and password to access the weblogic for developing and deploying the applications so that they will not be able to access or tamper other developers work.
    how to accomplish this in weblogic 11g
    Thanks in Advance
    user3560574

    GO to Security Realms > myrealm > Users n Groups > Create a new user (say 'developer') > Click on 'developer' user > Click on Groups > Make it a member of the groups you want your developer to be depending on what kind of previledges you want to give them.
    -Faisal
    http://www.weblogic-wonders.com

  • Invalid username and password when accessing ovi.....

    i have a problem when trying to sign in to ovi on my phone, it says e mail and password invalid even though this is not the case. i can sign in to ovi on the laptop and my husbands E71 using same information. Does anyone know a solution to this........ its driving me up the wall!!!!

    This question was asked before. I gave them the solution but they didn't take my advice.
    When entering the user name and password to access Ovi, the phone adds a blank character at the end of the user name and/or the password, and the site interpretes them as invalid. If you, after entering the info, erase the last blank character by using the delete button of the keyboard and then click "enter" no problems will remain.
    It happened to me too, therefore I know it so well. 
    mgoksoy

Maybe you are looking for