Password does not work after Lock windows 8

Hi Experts,
I have windows 8 Pro on my Laptop. I have started facing a weird issue if late.
When I login to the laptop after restart of PC, it connects fine but when I am connected to my domain in my office network, after locking screen (Windows+L) the system does not accept the password. I have to disable the Wi-Fi and then it logs in and
when I enable Wi-Fi I am in the network and continue to work. here are answers to some basic questions I am sure will be asked.
- I am entering the correct password.
- When I am connected to domain I get this problem. At home, it works fine and accepts password after unlocking system. But as soon as I connect to VPN, same problem.
- I have tried connecting via LAN cable and face the same issue.
- problem is not with my account, only with my desktop, I can connect from other desktops and other folks using my laptop face the same problem.
- Our IT guy here has given me a workaround to disable wifi everytime I have to relogin after locking screen. It works but it is not a very good workaround. disabling enabling wifi disconnects all my applications.
Have asked me to reimage the laptop. I have not given it a thought but I am getting more and more frustrated.
- I have tried deleting my profile and same problem, i don't think my profile may be a problem though as other folks using my laptop face the same problem.
Just when i started getting comfortable with Windows 8, i am stuck with this nightmare.
looking forward for some suggestions.
Yogi

Hi,
I'm a bit confused with your description. Is your account was domain account when encountering this problem?
When did this problem occures, if it just occures recently, it would be better to use system restore to reset your system to a former normal state.
Roger Lu
TechNet Community Support

Similar Messages

  • Password does not work after time machine restore and can not reset from CD

    The hard drive failed on my Power Mac G5. I replaced it and restored everything from Time Machine. The two non -admin accounts I can log into fine but my password for the admin account does not.  I tried resetting it booting from the OSX CD and using the password reset utility. It says it has done its thing but then I reboot and try to log in same problem.  It even has the old password hint.  I changed that  so I could see if it worked. I tried both my account and the root account out of desperation.  Any help appreciated!

    Hello, there's some corruption on the HDD, try this...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • Keyboard and Mousepad does not work after installing windows support software.

    I was able to successfully install windows 8.1 64bit on an late 2012 iMac. I went through the installation just fine with the mousepad and keyboard. I went into the desktop and open up the files and went to computer to download the windows support software. After it was done installing the windows support software, my mouse and my keyboard stopped working completely. I couldn't even click "finish" on the download. I turned the computer off by pressing the power button, then turned it back on. I held the option key and the Macintosh HD and Windows showed up. I turned the mousepad and keyboard back on and it was working again. So I clicked on Windows and as I enter the startup screen, the mouse and keyboard  stopped working again.
    Computer: iMac 21.5 in. late 2012
    Used Windows 8.1 Pro 64bit
    The keyboard and mousepad that I have is  bluetooth.

    Hi,
    Have you checked it from Sounds yet. Please
    Right click the speaker icon
    Select Recording devices
    You should see a "tick", otherwise Right click it and enable it.
    Regards
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • After a restore from Time Machine my login password does not work.

    My HD crashed and I replaced the HD.  I then restored from Time Machine.  After it was done restoring it prompted me for my apple ID and password and account info.  Now when I try to login, the password does not work.  After several failed passwords, it says I can reset my password using my apple ID.  How do you do this?  I click on the message and it just disappears.  I can't login!

    Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
    Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
    resetpassword
    ...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
    Clinton

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

    My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix.  I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z.  Any help? Thanks.

    after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
    i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
    so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
    the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
    basically everything is clean now. At least i hope and works fine. touch wood!

  • PCI wireless card does not work after restart - FM2-A55M-E33

    Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
    BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
    I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
    Does anyone know more about this issue?

    Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
    ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
    ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
    ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
    And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
    I am unable to find any useful information in the logs.
    Got any more suggestions?
    Thanks! (And sorry to disturb so much)

  • Print size in Photoshop CC does not work after updating

    Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
    I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
    Can anyone help please?
    thanks
    Fujibill

    Check the Image>Image Size and see what the print size is supposed to to be for the open document.
    Also, resetting the photoshop cc preferences might fix it.
    http://forums.adobe.com/thread/375776?tstart=0

  • HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps.  It also has stop work when trying to down load new Apps.  Any suggestions out their???

    For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps.  Everything else seems to work.  Any suggestions out their???

    I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working.  My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads.  I have checked into my ITunes account and the ID and password are correct  and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work.  My problem seems to be just with trying to use my ID and password when wanting to download new books or apps.  I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel.  This message appears usually ten minutes after I have tried to make a purchase.  At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen.  Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

  • Satellite L870-165 does not work after being repaired by their service

    Laptop Toshiba warranty does not work after being repaired by their service twice.
    Model: Satellite L870-165
    Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    After reboot still happening the same.
    I called Toshiba phone incident and after trying several options I said take him to repair the service.
    They first told me it was the hard drive, then phoned me to indicate that reinstalling and finally it was the motherboard, which supposedly changed. The day after being picked computer repair returned to give exactly the same error, only malfunctioned one evening.
    After another call to 902 the Toshiba warranty service, I went back to take the service, this time I changed the hard drive. When I got home the computer did not start even once, again gives the same error.
    I believe that this team comes with a factory default so that its solution is not easy because even the technical service told me that I did not know what else to do with it.

    >Computer will not boot, stays with black screen stating: No bootable device-Please restart your system
    This message pops up because the notebook cannot find the Windows system.
    There could be either an problem with the HDD or maybe the HDD is OK but the Windows system isnt preinstalled properly.
    You said that the service agent changed the HDD. But did someone install the Windows system?
    You can try to do it yourself take your recovery disk (hopefully you created such disk in the past) and boot from the recovery disk in order to install the system.
    In case booting from the Disk would not be possible, go to BIOS (F2) and disable the secure boot and change from UEFI to CSM mode

  • My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

    My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

    1.      Are you getting any error message?
    2.      Which browser are you using?
    3.      Were there any recent changes made on the computer prior to the issue?

  • Card slot does not work after update (14/10/2011)

    Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
    MacBook Pro 13 OS ver. 10.6.8

    Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

  • HT1688 My Hot Spot does not work after update to 6.0.1.  Service is with ATT.  Apple says problem is with ATT, ATT says problem is with Apple.  Anyone else having this problem?

    My Hot Spot does not work after update to 6.0.1.  Any suggestions?

    Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
    so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
    so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

Maybe you are looking for