Password Error when importing IDOCs or RFC

After spending a long time figuring out why the import IDOC function in Integration Builder kept rejecting my password - it finally occurred to me to try it in UPPERCASE even though the password is in lower case it worked. I guess this is a bug in the logon module for importing RFC's and IDOCS as imported objects.

Hi Andrew,
Welcome to the party
Is your XI system on SP 11 ?
Read this Thread:
Re: Unable to Connect to SAP R/3 System
Regards,
Sridhar

Similar Messages

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

Regd internal error while importing IDOCs and RFC's

Hi All,
Any idea, why i am getting internal error while importing RFX from ECC system to Dev system of PI.
It takes lots of time to import and many times it shows internal error.
I am able to login and select the RFC ... but all of sudden after selection ..the window gets freezed and i have to End task the IR part.
Is this a system error which only basis can fix?, have anyone faced similar issue.If yes please reply ..
Regards
Srini

Hi Srinivas
sevral times i faced this issue , ask your basis person , to increase the heap size a little more at XI server ,
and most of the time it happens due to Network down / connectivity .
take the help of your network team and basis team .
Regards
Abhishek

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
 Start of subsequent processing ... 20110519104427
 End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
 Start of................ 20110519104506
 End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Org.apache.jasper.JasperException; JCO error when Importing SAP Roles in C

Hello experts,
I have installed BOXI 3.1 SP3, Integration kit SP2, BW/BI 7.0 and ECC 6.0 on Windows 2008/64bit.
My goal is to import the roles into CMS from SAP BW/BI but getting the follwoing errors:
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc
C:\Windows\SysWOW64\sapjcorfc.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform.
java.library.path [C:\Windows\SysWOW64\;D:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\]
org.apache.jasper.JasperException
I followed the note 1292144 - JCO error when Importing SAP Roles in CMC,but unfortunately without success.
I installed SAP JCo Release 2.1.9 (64bit)
Best regards
Lutz
Edited by: Lutz Heinrich on Aug 12, 2010 4:17 PM

Install the 32bit version of the Java connector. BOBJ is 32bit so even on 64bit Windows you need the 32bit version of the Java Connector.
Regards,
Stratos

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when generating IDoc from MC document - workitem to all the SAP users

A workflow item with the subject of Error when generating IDoc from MC document is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
Please check this link for
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
Reward points if useful and close thread if resolved

Error when generating IDoc from MC document

Hi,
Our Workflow administrator is getting the following error in his inbox daily for a particular IDOC type.
Error when generating IDoc from MC document
Please let me know how to disable this message.
Regards
Elini.P

Hi experts,
i got the error msg when generating idoc from mc document
this error msg goes to all sap users inbox,how to resolve this problem
pl give me solutions
regards
kumar

Error when import BI content 3.5.3

Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "Queue SAPKLTHQ10 has not yet been confirmed".
In step 4/5 sytem shown statue/remarks "The Add-on installation terminated during phase PROLOGUE".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report "RSCPINST" at Tcode "SE38" for editing codepage after that the system shown error message "MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010" Please see sap note 563975.
Note: When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.

This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it.

Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...

Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja

Error when importing ST_PI 2005_1_620

Hi
I am getting error when importing ST-PI 2005_1_620 in of our system.
Here is the details on the log:
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
Looking for your expert advise.
Thanks

Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Have you reviewed the role?
Regards
Juan

Error when declaring IDOC segments in program

I am getting error when declaring IDOC segments in my program.
Below is how I declared.
data: wa_e1vfkonk like e1vfkonk.
For the same syntax few segments are showing as properly declared and few are showing error that 'eqvfkonk' does not exist.
How ever this structure does exist when i check it.
Help appreciated.

Hi Prasad,
I think the segment that you are declaring in the program doesn't exist in SAP system as standard.
Maybe you mean E1VFKONX, finishing with "X" instead "K"?
Reward points if useful.
Roger

Password Error when importing IDOCs or RFC

Similar Messages

Maybe you are looking for