Password for 192.168.1.1

I find I don't always need to get into the home set up page,and it seems I had a password at one time.I don't remember having a password. Maybe it's soemthing window's vista made. Anyway. I need to help my son set up his x-box 360 elite, but I can't get into the access page at: 192.168.1.1 How do I do it, without knowing my password and user name?
--Rhonda

The password is for Linksys Router login ..... try using the password you used while installing the router for the first time ....
if not then use admin as a password .... if that also not works then you have to reset the router ... after reset admin password will work ...

Similar Messages

  • Linksys Rejecting My User Name and/or Password for 192.168.1.1

    All of a sudden, my user name and/or password are being rejected when I try to enter the router utility. This is also happening on a second machine that is served by this one. Any solution, ideas?

    Oops! I should have mentioned that the router is a BEFW11S4 and the pci card is a WMP11. According to the Linksys website, both have the latest firmware and drivers. These are Wireless B devices that, in the past, have worked fine. Lately, the second computer has been dropping connections like crazy and is driving me---well, crazy.

  • How to find Default Subnet mask for 192.168.10.7/10?

    Hi,
    I am studying for CCNA and right now going through Subnetting section. Came across this question : What is the default subnet mask for ip address 192.168.10.7 / 10? If my requirement is to connect 1000 hosts then how many subnets, hosts per subnet and host range can i get using this?
    Using 10 mask bits, we get dsm as 255.192.0.0. but  192.168.10.7 is class c address then how can we hav 10 mask bits?
    Thanx
    Mahima

    hello Ganesh
    u
    are making me confused. A /10 cidr means i have 2 subnet bits which
    give 2^2 = 4 networks and remainings bits are the host bits (22) which
    definitely give more than 1000 hosts. According to Todd calculation,
    there will be four network, 64 will be the block size so we will hav
    four network of 192.0.0.0 , 192.64.0.0 , 192.128.0.0 , 192.192.0.0
    .Isn't it?
    How u arrived at 64 networks?
    thanx
    mahima
    Hello Mahima,
    You are right 64 will be the block size and following will be the subnetting for 192.168.10.7/10
    192.168.10.7/10
    current network 192.128.0.0 mask 255.192.0.0
    current host range 192.128.0.1 to 198.191.255.254
    Next subnet will be 192.192.0.0/10
    current host range 192.192.0.1 to 192.255.255.254
    And following will be the subnet
    Subnet          ,   Valid Hosts                       ,   Broadcast      
    192.128.0.0     ,   192.128.0.1 to 192.191.255.254    ,   192.191.255.255
    192.192.0.0     ,   192.192.0.1 to 192.255.255.254    ,   192.255.255.255
    193.0.0.0       ,   193.0.0.1 to 193.63.255.254       ,   193.63.255.255
    193.64.0.0      ,   193.64.0.1 to 193.127.255.254     ,   193.127.255.255
    193.128.0.0     ,   193.128.0.1 to 193.191.255.254    ,   193.191.255.255
    193.192.0.0     ,   193.192.0.1 to 193.255.255.254    ,   193.255.255.255
    194.0.0.0       ,   194.0.0.1 to 194.63.255.254       ,   194.63.255.255
    194.64.0.0      ,   194.64.0.1 to 194.127.255.254     ,   194.127.255.255
    194.128.0.0     ,   194.128.0.1 to 194.191.255.254    ,   194.191.255.255
    194.192.0.0     ,   194.192.0.1 to 194.255.255.254    ,   194.255.255.255
    195.0.0.0       ,   195.0.0.1 to 195.63.255.254       ,   195.63.255.255
    195.64.0.0      ,   195.64.0.1 to 195.127.255.254     ,   195.127.255.255
    195.128.0.0     ,   195.128.0.1 to 195.191.255.254    ,   195.191.255.255
    195.192.0.0     ,   195.192.0.1 to 195.255.255.254    ,   195.255.255.255
    196.0.0.0       ,   196.0.0.1 to 196.63.255.254       ,   196.63.255.255
    196.64.0.0      ,   196.64.0.1 to 196.127.255.254     ,   196.127.255.255
    196.128.0.0     ,   196.128.0.1 to 196.191.255.254    ,   196.191.255.255
    196.192.0.0     ,   196.192.0.1 to 196.255.255.254    ,   196.255.255.255
    197.0.0.0       ,   197.0.0.1 to 197.63.255.254       ,   197.63.255.255
    197.64.0.0      ,   197.64.0.1 to 197.127.255.254     ,   197.127.255.255
    Hope to Help !!
    Ganesh.H

  • Cannot bring up the router (192.168.1.1)

    Using the WRK54G V2 router - am not able to bring up the router when I call for 192.168.1.1 - I tried clearing the cache, I tried using different browsers (IE6, Firefox), I disabled the firewall, all to no avail: all I get is an error message that reads in part, "timed out." Does anybody know what is going on? Have others reported this problem?
    Barry

    When I go to edit my router settings by typing my IP into adress box, about 50% of the text doesn't even load. I have no idea what the hell is going on or how to fix it. .
    examples:
    http://img247.imageshack.us/img247/6240/08232006093217ir4.png
    http://img183.imageshack.us/img183/4158/08232006093104fl4.png
    I really need to forward some ports and I'm unable because of this. This was not happening about 3 weeks or so ago when I first installed the router. Please help.

  • Guest password request for purplecat website in oakland california 192.168.33.112

    guest password request for purplecat website in oakland california 192.168.33.112

    I have the same errors occurring at an alarming rate. I did isolate it to the App Store. Specifically when checking for an update. I was hoping that you could test this out for me. Go to your console log and select all messages and then check kernel in the sender box (bottom left). I found that now is a good time to insert a marker. Now launch the app store then got to the update section. Select check for update.
    Does this generate a series of the errors? I can reproduce the errors every time I "check for updates". The error would not show up when checking for updates in iTunes.
    I did notice errors in both extending from CFNetwork
    App store:
    2015-01-15 8:40:38.047 AM storeassetd[356]: CFNetwork SSLHandshake failed (-9802)
    iTunes
    2015-01-15 8:53:53.986 AM iTunes[2200]: CFNetwork SSLHandshake failed (-9806)
    Please compare and see if you get the same results.

  • I am trying to run page 192.168.0.170 for my IP Cameras but after login and password the page is not responding. Plz help!

    I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

    I am trying to run page 192.168.0.170 for viewing IP Cameras but after login and password the page is not responding. Plz help!

  • Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

    Folks,
    Hello.
    I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
    Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
    Step 1: start Oracle Database Server and LISTENR is listening.
    Step 2: start Application Server ./psadmin and 8 processes are started.
    Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
    In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
    The application server is down at this time.
    CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
    We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
    Mac OS X 10.6(Snow Leopard)
    Mac OS X 10.5(Leopard)
    iPad
    Oracle Linux Enterprise
    Mac OS X 10.4(Tiger)
    Windows 8
    Windows 7
    Mac OS X 10.7(Lion)
    Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
    I View APPSRV_1023.LOG (current server log file) and its content is below:
    PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
    PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
    PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
    PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
    PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
    PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
    PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
    PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
    PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
    PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
    PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
    ~                                                                                                                                                        
    I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
    My question is:
    How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
    Thanks.             

    Dear Nicolas,
    Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
    It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
    I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

  • Browser 192.168.1.1 Password and Username aren't working.

    I'm trying to access all of the router options so I can open some ports up but no matter what combination I try for the User Name and Password, nothing works.  My router's model number is WRT54G2 and I am wired to it, not wireless.  I haven't messed with any of the settings so the deafults should work...but they don't.  I don't know what else to do.

    Your User Name should be left blank, and the Password should be "admin"  (with no quotes).   If this does not work, and you do not remember setting any different password, then you will need to reset your router to factory defaults, and setup the router again from scratch.  If you saved a router configuration file, DO NOT use it.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead.  Report back with this problem.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt.  Report back with this problem. 
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    P.S.  Have you been running your router with no wireless encryption?  If so, then perhaps your neighbor wirelessly connected to your router (intentionally or unintentionally) and changed your password.
    Message Edited by toomanydonuts on 04-26-2009 06:09 AM

  • TC issues 192.168 address even though it's set for 10. range

    My Time Capsule is set to use the 10. address range for DHCP but sometimes it issues a client a 192.168.x.x address. The result is no connectivity for the client until I hit "renew DHCP lease" a few times. It's not totally reproducible but I've seen it happen with both Lion and Mountain Lion clients and both iMacs and MacBooks.
    I've already done a total reset of the Time Capsule and it made no difference. Should I just give in a switch to 192.168.x.x?

    The only way this can happen is for there to be another router in the network that is issuing different IP addresses... Check carefully when it joins the 192.168 address for bssid.. you can do this by holding down the option key when you click the airport symbol in the top menu bar. If it is different to the TC address you normally get, that shows it is picking up IP from a different location.
    Otherwise you have wired the TC wrongly.. you have a connection that should be WAN connected to LAN..
    Is the TC getting 192.168.x.x address on the WAN port.. please open and check the summary in the airport utility.
    Or getting a double NAT error??
    You should bridge the TC if you have another router in the network.

  • Hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

    Hi James and welcome.....
    Try the help here for Windows 7.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    Carolyn

  • Trying to confiq cisco bridge WET200. connected to macbook ethernet port. entered 192.168.1.226 for config util. Times out.

    I am trying to configure (due to WEP code on my wireless network) Cisco bridge WET200 for use in my home theater. To configure, I connected to ethernet port of macbook OS 10.6.8. Entered IP address 192.168.1.226 for config utility but it times out. Cisco says I need either IE or firefox. Downloaded firefox but still fails. Has anyone had experience with this?

    Found that if I clean up DNS for my domain with PTR and A then everything started working properly after a rebuild.

  • Connecting to 192.168.1.1 for checking router settings online brings non-English setup?

    Bought a new WRT54G vers 6 router to replace a version 3 that died on us recently, and we have had many issues with SBC Global DSL connectivity, but when I go to the 192.168.1.1 site, it isn't in English, but in Italian or Spanish..
    I can guess on some issues, but I never had a choice to pick what language this router page setup area would be in. Any ideas?
    I could use some help here.

    You need to download the correct firmware and upgrade or use tftp.exe.

  • For connection to 192.168.1.1

    Recently, I can not connect to the ip of 192.168.1.1. I can go into the internet. All my three computers can connect to the router via cable but only one computer can connect to it by wireless adapter. Also I can not succeed when to PING 192.168.1.1 . What is the problem? Is my router wrong with something?

    Open a command prompt window and enter "ipconfig /all". Post the full output.

  • WET54G v3.1 Will not accept the default password for web setup

    The setup:
    1 2WIRE wireless router for AT&T DSL connection
    1 wireless laptop, online and good to go
    1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
    1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
    I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226.  The WET54G is directly connected to the desktop.  I open Internet Explorer and go to 192.168.1.226.  After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect.  I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds).  It simply will not accept the password.
    Any suggestions?  I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me.  Extremely frustrating to say the least.
    Thanks,
    Sean

    Hi brickmonkey, 
    Sorry for taking so long to get back on this.  We left for a long vacation and I got ridiculously busy when we got back.  ANyway I just spent some time working on this and wanted to report back.  Still didn't get it to work.
    Got into the 2Wire and wrote down it's settings:
    Router Address: 192.168.1.254
    Subnet Mask: 255.255.255.0
    Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway.  It gave me the error "DUT and Gateway cannot locate in different subnet."  Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
    Because it wouldn't accept that 151.x.x.x address, I can't get any farther.  I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled.  I changed the 2WIRE from 1 to 6 in case that was an issue.  The WET54G is in Infrastructure mode, as the guide you linked to indicated.
    Any thoughts with this new info?
    Thanks again for your help with this,
    Sean

  • Why do my firewalls only use the domain username and password for login and enable passwords, not a different enable password like my switches do? The RADIUS config looks the same...

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Issue:
    Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
    Background:
    We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
    Switches:
    Username:domain-username
    Password:domain-password
    SWITCH>enable
    Password:enable-password-in-Active-Directory
    SWITCH#
    Firewalls (as they currently are):
    Username:domain-username
    Password:domain-password
    FIREWALL>enable
    Password:domain-password
    FIREWALL #
    With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
    Current switch configuration:
    aaa new-model
    aaa authentication login default group radius local
    aaa authentication enable default group radius enable
    aaa authorization exec default group radius local
    aaa session-id common
    radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
    radius-server source-ports 1645-1646
    radius-server key 7 1234abcd
    Current firewall configuration:
    aaa-server DC01 protocol radius
    aaa-server DC01 (outside) host 192.168.0.1
    aaa authentication ssh console DC01 LOCAL
    aaa authentication enable console DC01 LOCAL
    key 1234abcd
    Any help would be great, thanks!

    Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
    But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
    Firewalls :
    Username:domain-username
    Password:domain-password
    FIREWALL>show curpriv
    Username : domain-username
    Current privilege level : 1
    Current Mode/s : P_UNPR
    FIREWALL>enable
    Password:enable-password-from-running-config
    FIREWALL #show curpriv
    Username : enable_15
    Current privilege level : 15
    Current Mode/s : P_PRIV
    If you're using Authorization and Accounting it's recommended to stick with your current behavior.

Maybe you are looking for

  • Where can I find my IMAP  Path Prefix for MAIL?

    I am unable to send mail from my IMAC OS X v 10.6.8. I use Airport Extreme and Use a WiFi Network.  This only happened recently but whenever I try to sent a message it says "Can't send message using the server smpt.aol.com" This is what I use and if

  • Controlling the execution of start points in different nested iViews

    Hi, I have an application in which a tabstrip displays a single nested iView within each tab.  Each of the nested iViews loads data via a BI Query data service.  A start point in each iView specifies the initial parameters to load the query data. I w

  • E-mail is automatically deleting

    Has anyone else experienced e-mail showing up then before you can select it deletes? This has been happening everyday now, since the upgrade.

  • PARAMETER ID VALUE NOT DEFAULTED in CREATE MATERIAL MASTER (MM01)

    Hi, Currently when we create material master we like to defualt the field material group, using PARAMETER ID (MKL-Material group). I have defined the parameter ID for MKL(material group) and assigned a material group value, log off and log in again.

  • Install Premiere Pro CC to different location

    I did a trial of Adobe cloud. It installs to the default drive, but has settings to allow me to set the install directory for apps. However after doing a trial download of Premiere Pro, it and the encoder ended up on the default drive instead of the