Password for ethernet, connecting with AirPort Express?!

I live in a student-house, and normally connects with a cable to the wall (ethernet). I´ve got a password from the University where I study, and have to use this to connect with the ethernet.
My question; Can I place the ethernet-cable into the AirPort Extreme, and make it work on my mac, even though there´s a password? (can I type in this password somewhere during the installation?)
I´m no good at this, and I´m really really tired of having to use the cable on my mackbook....

Okey, than I wont try no more...
Thank you so much!!

Similar Messages

IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

anyone knows a reason for the item above?

My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

Can I create a home network withous dsl connection with airport express

can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.

I have internet service on iMac but cannot get connection for Blu ray with airport express.

Why am I not getting internet connection for blu ray on tv with airport express?

Which exact model of the AirPort Express do you have?
Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

How make wireless connection with airport express to Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly dont have as much knowledge as Jaybee and if hes had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about disabling the Airport Express resp. Extreme routers scares me rigid
I have looked at About this Mac and got the following for you hope its helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem Ill be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200)
D-Link DSL-300T
Zoom Hayes ADSL Ethernet (H0-15805) (081580572)
Any help is very gratefully received.
Regards,
... LIZ ...

Trekstor pocketair wifi storage connecting with airport express

Hey there!
Is is possible connecting a Trekstor wifi Storage with airport express? I wanna use Itunes and this storage for streaming music with mit mac pro book (OS X 10.9.3)
Or is it nessaray to use a apple wifi storage like airport extreme?
Thanks!
Best regards
Michael

Is is possible connecting a Trekstor wifi Storage with airport express?
In theory, the Trekstor should be able to connect to an existing network either via a wired (Ethernet) or wireless (Wi-Fi) connection. The AirPort Express, depending on the model, can supply both.
On the other hand, the Express DOES NOT support hard drives connected to its USB port; whereas, the Extreme and Time Capsule base stations do.

Keep loseing my connection with airport express since Leopard

Hi All.
Before i upgraded to leopard from tiger i was connecting to the internet via my airport express with no bother at all. In fact my two laptops connect with airport still with no probs. But like i say now ive upgraded as i cant connect alot of the time. I know absoultely nothing about computers. Please someone please help.
Many thanks

Hi Nodyland,
Try this:
Power Cycle your Airport Express. Just unplug the Airport Express from the power source wait 2 minutes and plug it back in.
This might be helpful
Airport Software
You might have to reset your Airport Express
Airport Reset
hope this was helpful

Best Connection with Airport Express for gaming

Can anyone help me with how I can get the strongest connection from my Airport Express to my PS3 for gaming.
I recently upgraded my old Airport Extreme to an Airport express and everything is great. My internet speeds from the wall are around 90mbps and ruining my laptop and devices from my Airport Express are around 70mbps which I can live with.
When my PS3 is connected it only received around 10mbps which is a massive decrease.
Can anyone help with the best settings for the PS3 to speed it up. My old Airport Extreme used to connected at around 45mbps which was great.
Anyone????????????????

Julie Kruyne wrote:
I am trying to do the exact same thing and am having some difficulties.
It was easier for "WiseJD" because he was using two Apple base stations, instead of your AT&T router.
I select Manual Setup, it just sits there thinking - I can't get into the actual set up.
So you see the Express in AirPort Utility, but when you select it and select "Manual Setup", nothing happens?
When setting up the Express to extend my existing wireless network (AT&T 2WIRE modem and Airport Extreme), do I initially connect the Express, via Ethernet cable, to the modem or the Extreme?
I'll guess that the AT&T device is connected to your broadband connection. Is the 2WIRE device either without Wi-Fi support or is that turned off? How is the Extreme configured, in particular in the AirPort/Wireless panel "Wireless Mode" setting and in the Internet/Internet Connection panel, "Connection Sharing" setting?
If anyone could provide a step by step process on exactly how to set up the Express to extend my existing network, I would be grateful.
I have very little experience with mixed-vendor home networking, but someone should be able to help.

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Ipad connects with Airport Express, but not wireless router

I have a airport express that exends my network and is connected by an ethernet cable to the wireless router. they are on opposite sides of the house from each other. every other device i own has full bars wifi anywhere in the house. but the ipad only seems to find the signal from the AE.
If i go in the bedroom with the wireless router, the signal drops to 1 bar. if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it. i have tried reset, hard reset, renew lease forgetting network, and all fails. any ideas?
I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

Sharing an internet connection with Airport express and Time Capsule

Hi, I have been happily using a cable modem and a Time Capsule for my internet connection and wireless network. We recently added solar panels to our roof and the system needs to be connected to the internet so it can be monitored remotely. Calling Comcast is an exercise in frustration, and the solar people don't seem to know exactly how to do it, so I'm trying this.
We bought an Airport Express, thinking if it is connected with an ethernet cable to the solar system, it could somehow share the internet connection with the Time Capsule, or they could talk to each other. When I plug in the Airport Express, the only set-up option seems to be to set up a new network, which I don't think I want to do. Can anyone tell me how to set this up? Thank you!

Hi, Under Water.
You should configure the Express to "Join a wireless network" or to "Extend a wireless network". (Either one will work.)
Connect your computer to your Express via Ethernet and open AirPort Utility. Press "Manual Setup" and authenticate if necessary.
Go to the "Base Station" tab. Give the Express a name and password.
Go to the "Wireless" tab. Set the Wireless mode to "Join a wireless network" or "Extend a wireless network." Enter the name of the wireless network created by your Time Capsule (or select it from the list). Check the box that says "Allow Ethernet clients" (if you're joining) or "Allow Wireless Clients" (if you're extending).
Provide the appropriate security mode and password for the Time Capsule's network.
Press "Update" and allow your Express to restart.
Then you can plug the solar system into the Express's Ethernet port.

ITunes 10.6.3.25 on ethernet connection loses airport express speakers but iPhone 4 airplay works

Hi,
I have started experiencing a problem this past week (Aug 2012) that I see sometimes reported here. When I run iTunes 10.6.3.25 on a Win7 machine that is connected by ethernet to my router, the airport express speakers would regularly disappear. I can always connect to these airport express via airplay from my iPhone 4. In fact when the airplay speakers disappear from iTunes on the ethernet-connected machine, I can reliably make them reappear by turning on the Music app on the iPhone. But after a while the airplay speakers would disappear again. On a Win7 laptop connected via wifi to the network the same version of iTunes seems so far not to exhibit the same problem.
Has anyone discovered what the underlying problem is or found a solution?

I ran into the specific problem in another thread. There are more than 100 connections from the apple TV's to iTunes. You can do a netstat -a (windows or Mac), and verify the problem. iTunes is smart enough to stop allowing more than 100 connections but stupid to allow the ATV to create so many connections.
Now for what you really want! Set all of your ATVs to wifi only. Even setting the iTunes host to wifi might help also. I think that wifi is more unreliable, and forces connections to drop, keeping the count under 100.
I also turned off ip v6. That could help you also. I originally had problems on a Mac mini, and built a windows 7 box to try to fix the problem. The wifi trick worked on both platforms. Several of us have bug reports into apple. I have a wired house also, and am very angry to NEED to use slow wifi to overcome this problem. The ATV gen 3 has been able to keep up with 1080p over wifi, so it doesn't hurt too much. What really hurts is spending over 40 hours troubleshooting this bug.

Having trouble bridging wired connection with Airport Express

I've had an Airport Express Base Station for a little while, really only using it to wirelessly print and stream my music.
I'm at my college now, and there's a campus wide wired network. I've been trying to bridge this network so I can wirelessly connect to the internet with my laptop, Nintendo DS and eventually Nintendo Wii. The problem is that I can only get the orange blinking light on the AEBS, I don't have the software that came with it (though I have the Airport Admin and Setup stuff under Utilities), and the computer doesn't seem to recognize the base station at all.
I'm an idiot, I'm pretty certain, but is there something easy I am overlooking here? Will an AEBS not bridge a wired network unless it's cable or DSL? I'm unclear on exactly what kind of network my college uses.
thanks!

Most likely your college's network is providing NAT/DHCP services. I suggest that you set up your AirPort Express Base Station (AX) as a "wireless bridge."
To set up the AirPort Express Base Station (AX) as a bridge, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, make these settings:
Network tab
- Distribute IP addresses (unchecked)
- Apply the new setting.
- Wait at least 5 minutes.

Password for ethernet, connecting with AirPort Express?!

Similar Messages

Maybe you are looking for