Password for the System Center 2012 R2 Orchestrator Evaluation VHD

I recently downloaded the Evaluation VHD for System Center 2012 R2 Orchestrator. After performing the initial setup, I am unable to log in with the credentials that i had provided initially for the Administrator. I faced a similar situation while working
with Evaluation VHD for System Center 2012 R2 App Controller. In that case, after some searches I found 'R2Preview!' as its default password. I have already tried other passwords - P@ssword1, P@ssword, p@ssword1, password1, blank password.
I hope someone can help me with this !

Sorry,
http://www.microsoft.com/en-us/download/details.aspx?id=39297:"For the
password type pass@word1"
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Similar Messages

Error message while upgrading to System Center 2012 R2 Orchestrator

I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330

FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself.

Ok so I forgot my password for the Game Center...

Ok so I forgot my password for the Game Center and the only place I put it is on my lost ipod which I probably didn't backup and I can't just change the Apple ID password because I used a compleaty different password for game center and I'm so confused !!!! Please help!! Is there anyway I can ask apple for my password?

your game center password is the same as your apple id password.

Configure Web console for existing "System center 2012 configuration manager R2"

How to configure Web console for existing "System center 2012 configuration manager R2"

There is no web console in ConfigMgr 2012. If you want a web console you have to look at third-party products.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Hi, my name is Chenet i have a Macbook 0sx lion 10.7.5 i don't remember my password for the system preferences i can't even go online, can somebody help me with that please

Hi, my name is Chenet i have a Macbook 0sx lion 10.7.5 i don't remember my password for the system preferences i can't even go online, can somebody help me with that please

Hi 'baltwo'
Thank you for your link, I already had been on this particular website this afternoon. they only discuss problems in the application and nothing about how the MS Office application installation does disturb Mac OS.
Or have I missed a special comment there?
In any case many thanks, trioloGo

How to create a Domain user in a Specific OU using System Center 2012 R2 Orchestrator and Service Manager

Dear All,
I have a simple Runbook with the following details:
Initialize Data: (First Name, Last Name, Login Name, Deparment Name) --> Create User: Name:(Domain), Common Name, Display Name, First, Last Name, SAM Account Name (From Initialize Data) --> Enable
User: Distinguished Name --> Add User to Group: Group Distinguished Name, User Distinguished Name
Active Directory Management Pack in place and the Prerequisites Configurations are added Too (Configuration User Name, Configuration Password, Configuration DC, Configuration Default OU.
The Runbook is Synched with Service Manager, Request Offering/Service Offering and published to the portal.
When I filled the 4 required values (First Name, Last Name, Login Name, Deparment Name), the Runbook will kick off and the user is created in Active Directory.
The user is placed in the Default OU which is predefined in AD Prerequisites Configurations in Orchestrator.
I need to add another Required Value to my Request Offering (SR) called User Level Enum List (Low, Medium, High).
I need to place the user in a Specific OU based on the Level entered from SSPortal, If the user is Low, then Create the user in this OU, if the user is Medium then create it in this OU, etc...
How can I do this in Orchestrator? What I want to modify in my runbook to accomplish this task?
Thank you,

I AM TRYING TO USER/MAILBOX CREATION PROCESS, FOLLOWING IS THE BUSINESS REQUIREMENT
GET THE USER FROM ERP SYSTEM (SQL)
CREATE USER IN SPECIFIC OU
ENABLE THE MAILBOX IN SPECIFIC DATABASE BASED UPON USER ROLE
CREATE A USER IN NAVISION SYSTEM WHICH IS AGAIN JUST CREATING SQL LOGIN.
PLEASE ADVISE ME THE PROCESS AND PROCEDURE ILLUSTRATION IF IT ALL POSSIBLE IN SINGLE RUNBOOK.
I AM ABLE TO CREATE USER/MAILBOX BUT STRUGGLING TO CREATE IN SPECIFIC OU/MAILBOX DB AND SQL LOGIN.
FARRUKH
[email protected]
Farrukh Anwar

Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
to create the Virtual Machine to run Operations Manager. Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
able to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
Operations Manager Console folder. Operations Manager Console
folder provides access to different parts of Operations Manager. Double-click
Operations Console to open the Operations Manager console."
so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
Files" there is no System Center folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
of the virtual machine, double-click the Operations Manager Console folder.
Operations Manager Console folder
provides access to different parts of Operations Manager. Double-click Operations Console to
open the Operations Manager console." so I did click on the Operation Console
icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

Can I use System Center 2012 Endpoint Protection in "Windows Server Remote Desktop Session Host" without buy the license ?

Can I use System Center 2012 Endpoint Protection in Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host" without buy the System Center 2012 Endpoint Protection license ?
I want to protect my Azure RemoteApp against the malware.
System Center 2012 Endpoint Protection installed Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host".
Now, I try to build Azure RemoteApp template by using the Azure Virtual Machine Gallary's "Windows Server Remote Desktop Session Host" .
Regards,
Yoshihiro Kawabata

Hi Yoshihiro,
Unless and until Microsoft modifies the license terms for System Center 2012 Endpoint Protection and/or modifies the Online Services Terms (OST) and/or other document explicitly saying that use is included with the Azure RemoteApp (ARA) monthly
fee I recommend you assume as that it is
not included and license it separately for ARA if that is even possible, which is a separate question.
For licensing it is best to be cautious and make decisions based on the official documents that are available that govern use of the software and services involved. At this moment I'm not able to find a Microsoft document that grants use of System
Center 2012 Endpoint Protection with Azure RemoteApp.
When I first used the gallery template and noticed that Endpoint Protection was installed within it I had the same question as you. I will update this thread if/when I obtain more information.
-TP

Can I get the detecting malware alert by System Center 2012 Endpoint Protection in Azure RemoteApp ?

Can I get the detecting malware alert by System Center 2012 Endpoint Protection in Azure RemoteApp ?
I want to get the alert and cleanup malware and alert our Azure RemoteApp users.
the System Center 2012 Endpoint Protection exist Azure Virtual Machine gallery "Windows Server Remote Desktop Session Host”.
I test the behavior of System Center 2012 Endpoint Protection by TrendMicro Malware sample "EICAR".
Regards,
Yoshihiro Kawabata

Thank you Pavithra for reply.
I have 3 points for alerting users and admins of Azure RemoteApp template image.
point 1: Fix action.
  When the user detect a malware, There are some reasons,
like viewing a malicious web site, like using the vulnerable applications.
  The User must fix his action in Azure RemoteApp session.
"Hey, the reason is that you open this web site, Don't open this web site"
point 2: Fix server.
When the user detect a malware, ITpro of Azure RemoteApp fix the current Azure Virtual Machine of Azure RemoteApp.
  There may be infected with other malwares.
ITpro need to fix the current Azure Virtual Machine of Azure RemoteApp before infecting other users.
"Hey, This Azure RemoteApp collection will update with the template image after ten minutes."
point 3: Fix damage.
When the user detect a malware, ITpro of Azure RemoteApp research the damage of all system,
like whether or not sent the infected email to other persons by other malware,
like whether or not broken other related systems by other malwares.
"Hey, Are other systems OK ?"
Regards,
Yoshihiro Kawabata

Reg : System center 2012 R2 - H/W Configuration

Is there any minimal H/W configuration to set up the System center 2012 R2 other than the H/W configuration available at "http://technet.microsoft.com/en-us/library/dn726764.aspx".
Thanks is advance
Darius James
Guna MK

Yes, I understand that, it is a good guide to state the Hardware Requirements. But for an Evaluation, no one can set up around 84 GB of RAM and all servers. There should be some minimal configurations to evaluate.
Thanks is advance
Darius James
Guna MK

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

How to access for Virtual machines in System Center 2012 r2 by remote console through code?

Hi All,
I am new in System Center. I am using System Center 2012 R2. I have a web application written by dot net, which shows the list of virtual machines created in the SCVMM. Now, I need to select a Virtual Machine from the list, and click a link named "console
access". This will allow the console access to the virtual machine. How can I perform this task?
Thanks in advance,
Moohak

The SCVMM VM console is an ActiveX application.
It is installed with the SCVMM Console application.
If you search around for the old SCVMM Self Service portal, you will discover how MSFT originally enabled this from a web front end.
If you look at Windows Azure Pack you will find a new pattern using RDP gateway.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager

I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.

Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points

Password for the System Center 2012 R2 Orchestrator Evaluation VHD

Similar Messages

Maybe you are looking for