"Password Incorrect - Enter the password for the Exchange account:"
I keep getting this error. But I don't have an exchange account set up with the phone. I deleted my exchange email and calendar syncing from my old job but I still constantly get this error, like 30-40 times a day. Anyone have any suggestions?
I've tried logging in with my old account info, but of course that is deactivated and doesn't work.
A piece of information that might help; I remember having to install something that Apple released right after the iPhone 4 launch that was supposed to fix Exchange authentication, so I removed the profile update to see if that would fix the problem but it didn't. (http://support.apple.com/kb/TS3398)
I'm pretty sure I just set it up by hand
Well, I suspect a profile got installed on your phone & now you can't delete it. That's why you're getting that popup. If my suspicions are correct, your only choice to fix this would be to restore your phone as a "new" device in itunes, followed by syncing your content back to your phone. All data on your phone will be erased, including this now invisible profile. I know of no other way to fix this.
Similar Messages
-
How do i remove the password incorrect enter voicemail password
Please help, my Phone keeps prompting me with "Password Incorrect" "Enter Voicemail Password". I've never set up a password. Your assistance will be most appreciated.
Contact your carrier. Voice mail is a carrier feature.
-
HT1212 message "password incorrect enter voicemail password"
I keep getting the message "password incorrect enter voicemail password". I never set up a voicemail password and this message comes up every time I do anything on my phone. I need it to stop!
contact your carrier to reset your password for voice mail
-
Hi
I want delete a box in my iphone. This box say: password incorrect. enter voicemail password. I never use passwords.Call your carrier as they can help you. This happened to me & it was the last 4 digits of my cell #.
-
"Password Incorrect"-Enter voicemail password
Hi guys, I started to get "Password Incorrect"-Enter voicemail password- whenever I use the phone or after a call. I never required a password prior to this. This started to appear before updating to 2.0. The previous version was 1.1.3. I restored before updating to 2.0 but the error message persisted. I can press "cancel" and get out of this prompt without entering a password.
Anyone else experiencing this or have a solution? Please advice. Thanks in advance.I have been struggling to get to my voice mail since the upgrade several weeks ago. One week ago I was able to get in once by using my default pw (someone at apple told me it was my phone number) but now it's not recognizing that password either. I would love to know how to get to administrative settings since it's not letting me change the password in my phone settings. It's becoming a big issue since I get my work calls on my cell also. Any insight would be appreciated! Thanks
-
I just updated to 10.8 Mountain Lion from 10.7.5. Now I must enter my admin password each time I attempt to access my main hard drive. How do I reverse the need for the password? It's a real PAIN!
I'd think you have a Keychain problem (Keychain storing passwords and the likes).
When you are being asked, are you offered the checkbox, "Remember this password in my Keychain"? If so, check and see if it stops asking. -
I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?
Can't you try the email option instead?
-
i am now ina serious problem . i deleted my email id which i gave as apple id . And now i forgot the password of the apple id and the answer for the security question too. please help me
Just go to this link:https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ ...... In there,there will be written manage your account,click on that.There will be the option of sign in.At the bottom of the password box there will be written FORGOT YOUR PASSWORD? click on that and go through the information required and your password will be sent to your email account.
-
Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed
The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212 -
Dear Community,
Anyone besides me get an annoying popup that cannot be deleted/closed reading:
FaceTime Password
Please enter your password for "my e-mail account name"
It happened to me today for the first time since upgrading to Mavericks 10.9.3, no "stop lights" in the title bar of the popup, in fact nothing at all.
I've never established a FaceTime account. So I tried to delete FaceTime from the Applications folder on the "system" disk thinking this may eliminate the popup. Mavericks informed me "Cannot delete FaceTime as it is used by the operating system.
Is this a MAC virus? Or is this an example user community alpha/beta testing that Apple just announced?
TIA,
GonzoBernelliThat being the case, why then did the FaceTime popup even appear in the first place?
It's not clear to me what it is. If it occurs again, please take a screenshot of the popup and post it in a reply.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
The screenshot attachment option for this support site appears only on computers - not on iPads.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply. -
I sign out of my imessage and i tried logging back in and it keeps saying my password incorrect but i know for a fact im using my right password i dont what to do its just not letting me log in
Updating Snow Leopard won't help. You need to Upgrade OS X to Lion or higher if your system will support it. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion and Mavericks requirements are the same, and are shown here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can download a free upgrade from the Mac App Store. If your system can only run Lion, or you need Mountain Lion rather than Mavericks for software compatibility reasons, youcan contact the online store at the number shown at the bottom of this page and purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you should be aware that PPC programs such as AppleWorks will not run on Lion or above. You may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table. -
Google accounts are suddenly offline. Popup: "Google Password Required, Enter your password for ... in Internet Accounts." continues to System Preferences/Internet Accounts. Account window won't open. I just get the grey circling system-working-on-it icon. Suggestions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to open the preference pane. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
Looking for help to update the certificate for my Exchange Email Account...
I'm trying to update the certificate for my Exchange Email Account...Dell had me delete the account, install the new certificate on my phone, and set up the email again...But it still won't work and acts like it can't find/use the new cert. Any suggestions besides a hard resest of the phone?
That's a great question, LSchmitz!
Is the e-mail account on your cell phone? Which device? If its on your phone, an Exchange e-mail, may need to be provisioned/ set up by your employer/ IT department.
VanessaS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!! -
Would Like to Get Report of Daily Emails In and Out from Members to a DL
Exchange version : 2007
I am the supervisor for the group and want to quantify this information. I do not need to see the content, just quantity
is it possible ?Well, distribution groups don't really have a concept of "in" or "out". They only serve to distribute messages sent to them -- unless you're asking to know who was a member of the distribution group at the time a message was sent to the DL.
Message tracking logs hold the information you want, though. You'd have to look for EXPAND events that reference the distribution group and take the sender's e-mail address from that event. If the DL is a simple one that's not a member of any other groups
you could also look for RECEIVE events sent to the e-mail address of the group and get the sender's name from that event.
You can use Powershell extract the rows of data from the logs, but you'll have to write the code to get the data out of those rows and into a format you want. Perhaps LogParser could be useful in place of Powershell?
--- Rich Matheisen MCSE&I, Exchange MVP -
Enter the price for the service item
Dear Experts,
We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
Thanks in advance.
Thanks
UmakanthHello,
I assume you are using a Product category configured for Extended Classic scenario.
In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
If you get the same error, please raise a OSS message for SAP.
Thanks,
Sushil -
I can enter a webadress in the adress field but when I hit enter nothing happens, If I press with my mouse on the side for the site to load it loads perfectly but enter pressing is non-responsive
I use FF4Please re-post in the Office for Mac Product Forums hosted by Microsoft.
Maybe you are looking for
-
How can I down load a new app with out the cloud sign how do I get the sign off
II'm trying to down load a new app but every time I try all I get is the cloud sign how do I get rid of it
-
Best practice for editing Captions, photo names, places, etc.
Hello - I find the small windows in iPhoto to be a bit "clunky" to do a bunch of meta-tagging. Anyone have any thoughts or suggestions on how to best do this? Where I can, I do batch changes. If I upload photos to mobilme galleries - can you edit thi
-
Java.rmi.NoSuchObjectException with custom InputStream/OutputStream
I'm experiencing a strange problem here...and have spent the night digging for an answer, but I don't see any... I am using a custom client/server socket factory, which works great until I return my custom In/Out streams from the custom Socket. I can
-
Why can't my buddy see video on import
Maybe you guys can help me. My buddy has a mac book air with an OS that uses QUICK TIME X. I guess he has SN or Lion. Anyway, I shot him some HD video in 720p 30fps and gave him a .mov file of the footage so he can learn to edit in imovie. I used FCP
-
Using generic drivers in 64-bit mode for eSATA card with Marvell 88sx7042
Hello, all. I'm wondering if anyone knows of a way to plug the eSATA card's pnp info into, for example, one the plugins in the IOATAFamily kext so that it will mount in 64-bit mode. I've tried this, and simply inserting the supplied kext in the IOATA