Password invalid message after reconfiguring

restored powerbook g4 to original settings shows my name as owner but won't accept my password

See this Apple note on resetting your password: http://support.apple.com/kb/HT1274 . You'll need an OS X install disk (gray faced that came with the Powerbook or black faced retail) to reset the password.

Similar Messages

Unable to add a mail account, with Invalid Password error message, yet can log into mail system OK through a browser. Mail technicians can't find the problem.

When I try to add a newly-created Bigpond account to Thunderbird, I get an error message "User Name or Password Invalid", yet I can log in to this account OK through a browser. When adding the account, Thunderbird says "Configuration found in Mozilla ISP database". I have previously successfully added Bigpond, Yahoo, Outlook and Hotmail accounts to Thunderbird and they are working fine. The Bigpond Technical Support staff have looked into this and cannot see what is wrong but they say they do not support Thunderbird. Any ideas appreciated...

Thanks. I had tried the auto and manual setups with the same result. IN addition, the Bigpond Support sent me the following which I also tried and got the same result.
For the settings that needs to be configured for your new mailbox, kindly follow the steps listed below:
(**Note: Please be advised that BigPond technical support team is only trained for Microsoft mail clients like Outlook Express, windows Live mail and the like. Having said this, we can only provide limited assistance in setting up your email account for your Thunderbird mail client by providing the correct settings that need to be configured.)
For IMAP server settings:
Account Type: IMAP
Incoming IMAP server: imap-mail.outlook.com
Incoming IMAP mail: port 993
Outgoing SMTP server: smtp-mail.outlook.com
Outgoing SMTP port: 587 (with TLS [preferred] or SSL Encryption depending on your e mail app)
Incoming uses SSL: On (this is required)
Outgoing uses SSL: On (this is required) (with TLS [preferred] or SSL Encryption depending on your e mail app)
Authentication Outgoing server (SMTP) authentication: Same as incoming mail server
For POP server settings:
Please be advised that before setting up your email account on an email client using a POP mail server, we will need to ensure first that 'Connecting devices and apps with POP' has been enabled through webmail. For instructions on how to do this, kindly follow the steps below:
- Log In your email account from the BigPond website from the Webmail section located at the top left side of the BigPond home page (http://media.telstra.com.au/home.html).
- The page then will automatically redirect to an Outlook website in which you will need to click the 'settings icon' (a gear like icon) located at the top left side of the page.
- From the drop down list, click on 'Options'.
- It will then direct the page to a new page where you will need to click 'Connect devices and apps with POP' under the Managing your account section.
- Choose 'Enable' and choose "Do what the device or app says—if it's set to delete messages, delete them." under Deleting downloaded messages.
- Click on the 'Save' button to save the changes.
- Log out of from your webmail page and start setting up your email client on your mail client using the following setting below:
Account Type: POP3
Incoming POP server: pop-mail.outlook.com
Incoming POP mail: port 995
Outgoing SMTP server: smtp-mail.outlook.com
Outgoing SMTP port: 587 (with TLS [preferred] or SSL Encryption depending on your e mail app)
Incoming uses SSL: On (this is required)
Outgoing uses SSL: On (this is required) (with TLS [preferred] or SSL Encryption depending on your e mail app)
Authentication Outgoing server (SMTP) authentication: Same as incoming mail server
In looking at the Thunderbird error message, it seems to consistently refer to the User Name and Password. I know they are correct, as I can log in from a browser using them. Is there something in the validation rules that might be the problem? Also, you may be aware that Bigpond is migrating their old Webmail system across to the Outlook platform. Registering new e-mail accounts in Bigpond get created on the Outlook platform, whereas older accounts are still on the Bigpond Webmail system. Is this causing a problem somewhere in validation?

After this message I changed my password but after 2 days I received this message : your password is not corrected . And again I change my password. But after 2 days I have this message again your password is not corrected. Why??

After this message I changed my password but after 2 days I received this message : your password is not corrected . And again I change my password. But after 2 days I have this message again your password is not corrected. Why??

I recently changed my Google Password and so I was getting the same message everytime my gmail tried to update on my phone. you would need to update the password on the account website, scroll down a bit it will allow you to update the password

HT1498 After entering my password a message comes up that says I can only use this account in th US and returns to sign in screen. I am I the uS . Am I missing something?

After entering my password a message says I can only use account in US. Then returns me to sign in page. How do I rent a movie?

After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

I can't add a second email account. I get a message next to the password field 'Username or password invalid'. I can login to gmail web ok, imap is enabled.

I have setup TB using a gmail account and is working fine. When I try to add another gmail account I get an error 'Username or password invalid'. I can login to this second gmail account through the web at gmail and the account has imap enabled.
ps - i've been using these accounts for years through the web
Thanks

I also tried deleting TB altogether and reinstalled trying the problem gmail account and it still didn't work.
While checking on the 2-factor authentication, which I don't use, i noticed something. The working gmail account allowed 'access for less secure apps' and my problem account didn't. I enabled that and was able to add it to TB. All works now!
Not sure if the less secure apps is a good thing, but its working.
Thanks Christ1

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

I upgraded my 4s to 7.0.4 and now I can't access hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

I upgraded my 4s to 7.0.4 and now I can't acicess hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Problem in deleting the message after reading

Hi
I m having some problem to delete the message after reading.
i read the FAQ, and there is only one question regarding to delete that i have tried but its not working
As my application required that message should be deleted after the processing.
Please help me out asap
Thank in advance.

now here is the protocol trace from starting to the end point
with the settings of
session.setDebug(true);
and
folder.close(true);
POP3: connecting to host "172.xx.xx.xx", port 110
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 (xxxxx.xyz.com) ready.
C: USER test1
S: +OK
C: PASS Password
S: +OK User successfully logged on.
C: STAT
S: +OK 1 548
Total messages = 1
New messages = 0
================================
C: TOP 1 0
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
C: LIST 1
S: +OK 1 548
------------STARTING LINE------------
MESSAGE #1:
From: [email protected]
To: [email protected]
Subject: testing
SendDate: Thu Sep 11 12:21:14 IST 2008
CONTENT-TYPE: text/plain
This is plain text
------------TEXT------------
C: RETR 1
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
------------TEXT------------
******************MESSAGE ENDING LINE*****************
C: QUIT
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 signing off.

Error message after successful manual data load

On our Stautory App, we have renamed our Accounts Dim to StatAccounts.
On data send I get an error message after data is submitted
successfully:
Application     :       STATUTORYCONSOL
       Status :       Success
       Submitted Count :       1
       Accepted Count :       1
       Rejected Count :       0
               - Error Message -
ExecuteBaseLogic::Invalid dimension: ACCOUNT
We have renamed both Constants.lgl and System_Constants.lgl to
StatAccounts and yet the error message persists!
Regards
JP

Hi,
The resolution was as follows:
The app set I used as the "template" had a custom stored procedure in it which was being activated on data load. This stored procedure was caliing the ACCOUNT dimension instead of the STATACCOUNTS dimension.
We have deleted all unused packages and the issue is resolved...
Thanks to everyone for responses.
JP

Error message after sending text message

I keep getting an error message after I send off a text. It says that the number is invalid and that i have to enter the entire 10 digit number, so at this point i go back to the contact list and ensure that i have the area cose as well. I re-send and get the same message.
can anyone help??

There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems. It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

Invalid object after applying fa patch

Dear all,
Just now I had applied patch for FA & Generate message files from Generate Applications Files menu. How do I know that there are any invalid objects for FA after applying patch in order for me to run Compile APPS schema from adadmin to compile the invalid objects. What is the example for the invalid object message? What is the effect if I run Compile APPS schema eventhough there are no invalid object occur? Please advices.

HI,
Below is my last message after compiling the APPS Schema
======================================
There are now 1 jobs remaining (current phase=pc_errchk):
0 running, 1 ready to run and 0 waiting.
Assigned: file aderrchk.sql on worker 1 for product ad username APPLSYS.Spawned Process 29807
Completed: file aderrchk.sql on worker 1 for product ad username APPLSYS.
Done compiling APPS schema(s) in parallel.
Telling workers to quit...
All workers have quit.
Dropping FND_INSTALL_PROCESSES table...
FND_INSTALL_PROCESSES table dropped.
Dropping AD_DEFERRED_JOBS table...
AD_DEFERRED_JOBS table dropped.
Please check your log files for errors that may have occurred
while compiling invalid objects.
Be sure to look at the log file(s) for the parallel worker(s) which ran
adpcpcln.pls and aderrchk.sql. These scripts display compilation errors
and list objects which are still invalid.
sqlplus -s APPS/***** @/test/oracle/testappl/ad/11.5.0/admin/sql/adinvrst.pls *****
Spawned Process 29850
Review the messages above, then press [Return] to continue.
===========================================
I had run select owner, object_type, object_name from dba_objects where status = 'INVALID' order by 1,2; once again to look for an INVALID object but the INVALID object still appear.
Please advice. Do I need to run compile APPS Schema once again?

Getting General invalidation message processing exception ...

Hi all,
We have installed Oracle Portal 10.1.2 on the Oracle MR 10.1.2. Both are on the same machine. Initially when started creating pages and page groups, I did not get any problem. But we wanted to call a BPEL process from the portal. So, we installed BPEL on the Portal middle tier. Then I started getting the following error:
General invalidation message processing exception: User-Defined Exception (WWC-40018)
General invalidation message processing exception: Error invalidating content, Non-200 status code returned by Web Cache. Status: 401 Unauthorized (WWC-40018)
This is happening when I try to add a new tab or add potlet etc.
Can any body throw light on this?
Thanks,
Sasi Bhushan.

Hi,
After looking into config files and following some of the procedures that may solve this problem, we could not get the problem solved. But when looking at the portal web cache settings, we came to know that the Invalidation Username should be Administrator instead of Invalidator.
After changing Invalidation Username, everything seemed working fine.
Thanks,
Sasi Bhushan.

S620 htc Windows mobile E-mail or password invalid...

I have a s620 htc and I can use my mobile phone fine when connected to my own bt router using the normal SSID. However when I try and use BTfon insetad even in my own home it wont work. It does get to the btfon login screen and asks for my user emaill address and password. But as soon as I put it in and click login it states "e-mail or password" invalid.
I know my email address i.e [email protected] and I know the password.
I can connect using BTfon on my laptop device fine with the username and password. But I do exactly the same on the phone and it fails. I have even changed my btinternet password to something simpler and does exactly the same. Logs in ok on my laptop but my phone wont login. I press the capital button and make sure the number is correct but still no joy.
Is there anyway I can try and hook mobile phone to my pc and edit anything to hard code the user name and password. I cant seem to find a windows mobile app only android and I phone. I assume I only have to get this working once and it willl be automatic after that
Very frustarting as only got the phone for a small bit of browsing when out and about.
I have tried password several times and I know what I am inputting is correct

Any help is worth a try.
I did try that too as so difficult to tell with Windows 7 mobile not being that great, as on the laptop you can easily see which buts need just user name and which ones need full email address. Its really odd if i get to a certain pageon my phone I can log in and check my BTfon status so accepts all my user name and password on that. But its the very first screen my phone hits when I try to go on the internet, then I click btfon login. I then try and put the details in that screen and just no joy.
I dont mind stripping windows mobile off this phone but cant find an alternative o/s

Cisco 1921 Router default password invalid

Hi All,
I am facing a weird issue where after resetting the Cisco router 1921, i am trying to login using default username "cisco" and password "cisco"
and i am getting password invalid error.
I have hard resetted the router using the the key in the back.
Can someone help me in resolving this error. Its frustrating when you cant even login to a new router
Thanks!!

Some devices are configured with onetime password. If you log on with these credentials and save the configuration, the default password is erased. If you don't have set a new password, you'll end up with an inaccessible box. This avoids production devices with the default manufacture password and being exposed.
You need to do a password recovery procedure.
1) connect via console to the device
2)power on the device
3)hit ctrl+break until you are in rommon mode
Type confreg 0x2142 at the rommon 1> prompt in order to boot from Flash.
This step bypasses the startup configuration where the passwords are stored.
Type reset at the rommon 2> prompt.
The router reboots, but ignores the saved configuration.
Type no after each setup question, or press Ctrl-C in order to skip the initial setup procedure.
Type enable at the Router> prompt.
You are in enable mode and should see the Router# prompt.
As it's a new router without previous configuration it's not really required to restore the previous saved configuration. But if you would do: copy start run
Warning: Do not enter copy running-config startup-config or write. These commands erase your startup configuration.
Type configure terminal.
The hostname(config)# prompt appears.
Type enable secret in order to change the enable secret password. For example:
hostname(config)#enable secret YourPassword
Restore the previous conf-reg value:
hostname(config)#config-register 0x2102
If you did a copy start run, you must also configure a new user:
Username youruser secret yourpassword
And of course: save your configuration
Don't forget to rate useful posts ;)
Sent from Cisco Technical Support iPad App

Password invalid message after reconfiguring

Similar Messages

Maybe you are looking for