Password is INVALID through GODADDY link but works on "view published site"

I have a password protected iweb site.
The password i put in when i visit my website url i got through GODADDY doesnt work.
But it works when i type it in when i click on the visit published site now. Help?
How do i make it work using the url that i bought from go daddy?

Welcome to the Apple Discussions. They load for me. Clear your browser's cache and reload the page.
OT

Similar Messages

  • OWB-Location for Sybase is defined through database link but not working.

    Hi,
    HS details are configured and database link from oracle to sybase database is working fine. In OWB, table list of sybase database is also displayed. Location defined for sybase database through connector which refers to database link created from oracle to sybase. While defining location on clicking of "Test" it gives result as successful. But when validation program is run for that location, it gives error that validation failed, specify correct host name, port number etc.. now, i am not able to solve this as database link is working fine and it is displaying list of table from sybase database. All the heterogeneous settings are done. I tried but sybase database doesn't allow direct connectivity so i define the location using connector which points to database link. Is there any thing missing in the setting of HS and do sybase allow connectivity direct from owb ?
    Please help.
    (If problem is not clear, please spare time to ask a question, i will reply immediately.)
    With Regards,
    Amit Shah.

    Amit - did you get anywhere on this?

  • Iweb: Why do navigation bar page links not work live when published?

    Why do the navigation bar page hyperlinks not work when site is published? There are no objects or boxes over. Works fine until published live. Help!!!

    this image: http://extravorganza-events.com/extravorganza/Home_files/droppedImage.png
    has a large transparency section above the visible (lower section), crop off the transparency section.

  • Redirects when I click a link, but works if I type the URL

    I have a MacBook with Tiger and Safari. All currently updated. I have an email with a link to the person's homepage. When I click it, it goes to his old homepage, which used to be listed in his emails. If I type the URL in the link, it goes to the new page, as it should. It doesn't do this on any of my other computers (two macs, two pcs).
    Can't be a host file, or typing the URL wouldn't help.
    I used Onyx to clean cache, including system cache. Cleaned cache from Safari. Deleted the Safari cache from my libray/users/caches/ folder. Restarted, rebooted. Deleted cookies, deleted history.
    What could be doing this? More perplexing, how would it know what link this guy USED to use in his emails, but no longer does?
    Spooky...
    MacBook   Windows XP   Tiger, of course

    Interesting suggestion. I installed PithHelmet (Pretty cool, by the way) and told it to remove the referrer headers. No joy. Still doing the redirect. You are on to something as to how it's doing it, though. I'm using Yahoo mail. If I log into another mail account using this machine, and click this link in a message, it goes to the right page. So, the link is only broken on my machined, while logged into Yahoo mail AS ME.
    If it's any more help, the correct site is an iWeb page. The old one it keeps sending me to instead is on geocities.

  • My apple ID is not working with Facetime or Messages, but works on the apple site and other applications. Why is this happening?

    My Messages and Facetime applications say my apple ID or password is incorrect when it works for other applications including icloud, and works on the apple id website. I have reinstalled Mountain Lion upon request of an apple advisor but there is still no luck and other apple IDs work on the applications. Why is this happening?

    Yes, you will need to call Apple at this point for further assistance.
    Apple ID: Contacting Apple for help with Apple ID account security

  • Some page links not working when I publish iweb site to desktop folder?

    I just created a photo website using iweb. All the links to pages, etc. work fine in the programme but when I go to publish it to folder to check it on a web page some of the page links don't work?
    Any help would be greatly appreciated!
    - Ricky

    Even though you have deactivated the iWeb navigation menu, the navigation layer still exists and is blocking your custom links. Open the Inspector Page tab and try changing the value for Header Height to zero. See if this does anything for you. If not, then try increasing the Header Height value incrementally. This pushes the navigation layer down your page and maybe out of the way of your custom links.
    Of course, there is also the question of whether you custom links are placed on the page as a header element or as a regular page element. You can put elements into the header or footer layers by holding down the Apple key while dragging the elements until you see the header/footer outline highlight in blue.
    If your custom links are header elements, then increasing the header height to push the navigation layer down will probably help. If your custom links are page elements, then decreasing the header height to zero might be more likely to help.

  • Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

    Hi,
    I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section. 
    So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
    With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
    However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
    Can anyone suggest what can be done for the change to be reflected in the old blog site?
    Thanks in Advance,
    Regards, Keerthi Suryadevara

    Hi,
    According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
    You can add the the Code inside the Default list pages. For more information, you can refer to:
    Enable Attachment in SharePoint Blog post list and display the list Attachments
    In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
    Here is a similar thread for your reference:
    http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • My Spry collapsable panel works on Dreamweaver but not on my published site

    I created a one page static microsite for a client and inserted Spry collapsable panel in the content div.  It looks perfect on Dreamweaver and even when I previewed it on Chrome, Firefox, and Safari, it looked great.  After I uploaded the page, the panel's dissapeared and the text center justified.  Any help?
    The site is http://www.laurawoodsexposed.com (it's a political website, not a porn website)
    Any help would be great. 

    I created a one page static microsite for a client and inserted Spry collapsable panel in the content div.  It looks perfect on Dreamweaver and even when I previewed it on Chrome, Firefox, and Safari, it looked great.  After I uploaded the page, the panel's dissapeared and the text center justified.  Any help?
    The site is http://www.laurawoodsexposed.com (it's a political website, not a porn website)
    Any help would be great. 

  • Edit button not working on a publishing site on sub-level pages only (SP 2010)

    When I create a top level page, the Edit button/edit page works fine with checkout and checkin.  However, once I create a sub-level page - that is I create a second page within the first page then the edit button does not work and there is a message
    displayed on the ribbon in yellow background: 
    Status:
    Published and visible to all readers 
    I have read all responses to similar posts and tried them but problem is not resolved. 
    I don't have workflow turned on, I don't have content approval, yet, issue is still there. 
    Please help. 

    Hi Wynnit,
    Pinning will not work in most devices - desktop only. To do the same in your device layouts you need to use the scroll motion tools.
    To add code to the <head> tags in Muse you go to your page properties and under the meta tab you will see a section you can paste your code.
    When  you do push live with Business Catalyst you will be given prompts as to how to go about it.

  • Navigation menu links not working

    I just published a site with iWeb and the navigation menu links are not working. They appear to be active when I mouseover them in iWeb, but but neither the mouseover effects nor the links themselves are working on the published site in Safari.

    Finally solved the problem.
    The title of the webpage had a clickable link right above the navigation bar. Once I removed that the navigation bar started working.
    I'd guess that the webpage title was "infront" of the clickable navigation bar.

  • ATTN APPLE GUYS iWeb comments link not working on published photos site

    When you publish a photo site (theme black) to mobileme and check the allow comments check box the link does not work on the published site. You cannot add comments.

    This is a users help forum and people from Apple do not look at these pages. If you have problems, then you need to contact Apple directly and let them know.
    Lots of others here have had problems with comments not being allowed on blogs and it is not just one theme either, it seems to be across the board. There are lots of threads about it here and I believe some have contacted Apple and they say they are working on fixing it. It is to do with the transition from .Mac to MMe.

  • Background images flickering and turning black on scroll in published site, but in not preview.

    The background images are very flickery and turning black when scrolling when viewing published site in Safari.   This just started happening today after working on this for a few weeks now and the first time I'm noticing it.   Everything is still ok in preview mode.  All the large background images are optimized to be 500kb or less (they are all just placeholders).
    http://ics0913.businesscatalyst.com
    Any help would be appreciated.  Thank you.

    that is so strange, i had the location "image/rotator/......" for all three of my images in the js file and only the third one works?
    i believe they are all loading up fine as of this moment, just like they were yesterday, but not this morning when i first arrived at work. i wonder what changes the location by itself.
    hopefully the same thing won't happen again. 
    as for the text problem, thanks for pointing that out, i really appreciate it! but our office has been quite understaffed for a while, and no one here really knows anything about web maintenance. hopefully someone will fix those problems some day.
    thanks again bregent!

  • A visitor from Japan is unable to connect an iPhone or a Macbook Air to my Airport Extreme it says the password is invalid but the password works for other devices?

    Am unable connect a MacBook Air to Airport Extreme using a valid password get an error message that password is invalid. The Mac belongs to a visitor from Japan?

    Test by simplifying the name for the wireless and set names for the two bands..
    eg AE24ghz and AE5ghz.
    Then use no security.. does the MBA and iphone then join..
    If so put back security.. wpa2 with simple password, no spaces pure alphanumeric mixed case and numbers.
    If no connection test with fixed channels .. say 11, 9, 6 in that order for 2.4ghz.
    Don't worry about 5ghz for now.. if it still won't join it is somehow incompatible.. you need to reset the Japanese devices but I am not sure how.

  • Flash not showing up on page but works through direct link

    So I just inserted a flash object into my dreamweaver page. 
    The flash works fine the direct link here works: http://www.abbottsports.com/tennis/flash/tennismenu.swf
    But when you visit the page: http://abbottsports.com/tennis/adulttennis.php
    it's just blank space.
    Here is my flash code:
    <object id="FlashID2" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="597" height="115">
            <param name="movie" value="flash/tennismenu.swf" />
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="swfversion" value="15.0.0.0" />
            <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
            <param name="expressinstall" value="/htdocs/Scripts/expressInstall.swf" />
            <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
            <!--[if !IE]>-->
            <object type="application/x-shockwave-flash" data="flash/tennismenu.swf" width="597" height="115">
              <!--<![endif]-->
              <param name="quality" value="high" />
              <param name="wmode" value="opaque" />
              <param name="swfversion" value="15.0.0.0" />
              <param name="expressinstall" value="/htdocs/Scripts/expressInstall.swf" />
              <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
              <div>
                <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
              </div>
              <!--[if !IE]>-->
            </object>
            <!--<![endif]-->
          </object>

    Lots of conflicting info here.
    The page you linked to is using a different .swf:
    <param name="movie" value="flash/topslideshowtennis.swf" />
    which calls for swfversion (actually this means which Flash version to use)
    <param name="swfversion" value="6.0.65.0" />
    which is a really, really old version.. not sure if that even works.... change to version 10.
    Since you have the .swf in a different folder than the HTML Web page, there could very well be pathing problems if the Flash uses any external files ... like images or .xml files. Are there any other Flash related files besides the .swf? What else is in the "flash" folder?
    Your code posted above probably won't work either
    <param name="swfversion" value="15.0.0.0" />
    There is no Flash player version 15 (yet)... change that to version 10 also.
    Then there is the matter of coding errors on the page... of which there are many!
    Validate your code here:
    http://validator.w3.org/
    Best wishes,
    Adninjastrator

  • After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but says my hard disk is locked?

    After upgrading to 10.7.2, my iMac works fine for 40-50 minutes, then slows to a crawl.  Restart gets back to normal, then 40 minutes later need to restart again.  Thought about reinstalling Lion through Lion Recovery, but won't let me, says my hard disk is locked?  Any suggestions?

    Launch the Terminal app in /Utilities/, run these two commands (copy & paste each one separately and hit the return key):
    sudo chflags 0 /volumes/*
    sudo chmod a+rx /volumes/*
    at the Password: prompt, type in your admin password, carefully since nothing displays on the screen, and hit the return key. These should unlock your drives. You might have to restart.

Maybe you are looking for