Password issue in Transport Domain

Hi
We was getting some problem while releasing the transport request in ERD (SAP Dev server). We was getting error 12. I tried different option but did not worked and then we decided to re-configure the Transport domain (deleted old trasnport route using SE06 and then re-created transport domain using STMS). Now, ERD is the domain controller and ERQ (QA server) and ERP (Producation server) is the part of domain controller. I created one test transport request in ERD and moved to ERQ.
Everything work fine but have one issue. When i was creating the domain controller using my user ID in client 000 (with sap_all authorization), it asked me couple of times password for productive client and client 000. When i was adding ERQ and ERD, it again asked for my passwords (2 to 3 times for each system). I'm not able to understand it.
I created transport request in ERD and release it. When i was trying to move the same transport to ERQ server (i logged on ERQ server to transport request), it again asked password for ERD, ERQ and ERD servers.
Looking forward the solution of this problem.Not sure, if i need to set some profile parameter to avoid to enter pasword or something else.
Pls suggest to solve this problem.
Thanks
Amar

Thanks Siva for quick reply.
I checked the connection as you mentioned. Connection test is ok but Auth test failed:
'Connection Test TMSADM at ERQ.DOMAIN_ERD '
Password logon no longer possible.
Same error for all three system. I think, something worng with the 'TMSADM'.
As mentioned earlier, there was some issue in transport domain. To solve the problem, we deleted all RFC for TMS* in SM59 of ERD/ERQ/ERP server. Deleted transport route using SE06 and re-cretaed Domain controller and then added the ERQ/ERP in domain controller. ERD is the domain controller.
I had not deleted user TMSADM in client 000 before re-configuring the transport domain. Not sure, if i should delete user TMSADM in all three servers and re-create the domain contoller. Any suggestion on this?
Problem seem to be for the password of TMSADM user ID. Checking more in details.
Thanks
Amarjit

Similar Messages

Server 2012 Password issue on new domain

We recently setup a new domain controller running Server 2012 R2 standard 64 bit. All user profiles were setup in Active Directory. The default password we set users was Welcome1 and we chose all the defaults for the password policy. We set each account
to force the user to change their password when they first login.
The issue we see is that when a user logs in and tries to change their password, it will not let them change their password the way it should be. For example, the account "testuser" was set to Welcome1. When I tried to change it to
Atlanta@2 or Georgia8 or Nexeo+=7 or Kentucky9 it said "Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirements
of the domain"
I then tried to change it to Welcome2 and it accepted it.
I then went on the server and reset it logged in as administrator and see no issues (I can change it to whatever I want). So the issue is on the user end. I also turned OFF complexity requirements.
I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?

I logged back into the account and tried to change the password to Kentucky7 and it worked. I then did a CTRL ALT DEL and tried to change it to Kentuky9 and it gave the same error.
I'm not sure what is going on. Maybe there are time intervals on how often a user is allowed to change their password in Server 2012? Any ideas as to what is going on?
You must set minimum password age.
What is this:
Minimum password age

Not able to include the system to its transport domain

Hello,
We are not able to include the system to its transport domain. We are getting the same error:
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          01.10.2010 11:27:35
Please advice
Sankar

Hi Shyam,
This is actually a program error and the same can be rectified by implementing the [SAP NOTE 1412609 - DUPREQ when configuring the transport domain|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1412609] using the tcode SNOTE.
This will resolve ur issue.
Regards,
Varadharajan M

How Do I Move Production from one Transport Domain to another

Hi,
We are prepping for our upgrade from R/3 4.7 to ERP 6. I have created new Dev and QAS systems in a new transport domain for the upgrade. A new transport Domain was created for the upgrade landscape, and a placeholder "virtual" system was created for production in this domain.
Now, before I start the upgrade, I would like to change the transport domain of our production system to be included in the new TP Domain.
Thanks for any suggestions!
Tom

I have figured this out. I changed the profile parameters to point to the new server and bounced the instance.
I also changed the TP Domain in the Solution Manager to the new domain.
I logged in to the old domain controller, and deleted the production system from the System Overview, and propogated the configuration. This essentially removed the production system from the landscape.
I then logged on to the production system in client 000 and when I brought up STMS it automatcially suggested the new transport domain. I accepted this and the system was added pending approval.
After logging in to the new domain controller, client 000, I approved the system and it replaced the previously virtual system with the actual production system.
I hope this helps others in the future.
Tom

Issue in transporting a BEx query

HI All,
There is an issue in transporting a TR to BW production. I modified a query in BW development and transported the TR to quality. There was no error. But while transporting the same TR to production there is an error stating u2018Error when activating element 4MZQSRLBSDSWYISFYLHDX07INu2019. This element is UID of query itself.
Not sure why it failed to activate on import. The same was imported successfully to BW quality. I don't understand why it is not getting imported to production now. Please suggest.
Thanks in advance,
Vismark

Hi,
A helpful doc for you:----
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908641ed-c7c4-2d10-61be-929276f9e32c
Regards,
Suman

Upgraded to yosemite and now having password issues and slow start up

I have upgraded my macbook pro to the OS X Yosemite operating system and now encountering start up and password issues.
Previously on start up my system would go to the log on icon within 10 to 15 seconds of pushing the on button. Now there is horizontal loading indicator bar appearing and takes about 30seconds to 1 minute to go away before getting to the log on screen and if I click on my icon the system goes live on screen without having to put in a password which is an obvious security issue.
I have tried adding a password however each time I try to put my old password in it tells me it is the wrong one.
I am operating Yosemite 10.10.2 on a macbook pro with 8gb memory with i7 processor..
The computer was running perfectly ok before this up grade so I had resisted previous prompts to upgrade due to the bad press this system was getting last year. I thought Apple would have had this all sorted by now??
I would appreciate any help if anyone knows how to resolve these issues.

Install the version of Java they want from here: Java for OS X 2014-001
See if CS 5.1 launches.
If not reinstall CS5.1 and any updates.
Gene

Cisco Server VCS C220 M3 Server BIOS password issue

We have a Cisco Server VCS C220 M3 Server BIOS password issue.
We needed to turn on Bit locker in the Cisco Server VCS C220. To do this we needed to create an administrator password for the BIOS to turn on trusted Platform Module (TPM). After we set up the administrator password and turn on Security for TPM. We were prompted for the administrator password. It would not let us log in with the administrator password that we created for the BIOS. In the next few days we received a BIOS is corrupted screen (BIOS Flash Image Corrupted *****).We follow procedures to recover the BIOS with the USB stick with recovery .cap file in the root folder. We tried reseating the jumper pg. 35 of the Cisco Server VCS C220 M3 Server of the Installation and Service Guide.
http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C220/install/C220.pdf
We were able to bring up the server, but we are still not able to get pass the Admin password issue. We tried to clear the CMOS header with Header J37 page 2-18 but we had no success with clearing out the password prompt. Figure 2-6 Service Header Locations shows the J41 BIOS RCVR boot and J37 Clear CMOS.
Can anyone provide us documentation of where the pins are located on the motherboard to clear the BIOS password? We are looking for more of a detail picture of the pins please. The documentation is only showing a basic diagram of the header locations.

You need to look at the CUCM logs for further info on what might have happened, and to make sure your servers are fit for the amount of users, devices, etc. you have in your environment.

Can't install due to password issue

I've reset the password 3X and still can't download due to password issue. Help!

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240

Upgraded to Leopard now password issue

OK I upgraded to Leopard on my G5 and cant log in with my password . I have read this forum and tried some of the related password issues when upgrading to Leopard . I can only log on when I use the root password I created , I think that the main issue with this is in the keychain . How do I disable the whole log in password so That when I turn the computer on it just boots up with out a password as it did before I did the upgrade .
Thanks Mike...

You can use the Leopard upgrade disc to reset the passwords. Follow the instructions here:
http://support.apple.com/kb/HT1274
To start up in a user account rather than with a login, go to System Preferences -> Accounts. You should be able to change the pull-down menu next to "Automatic Login" to be one of the users or the administrator. This will require you to unlock the little lock and enter your password--which you may need to reset as noted above. Good luck!

Email password issues

Why am i having email password issues? This is the email from [email protected] "Your account (email) could not be authenticated. If you have recently changed your email password, please enter the most current password in settings to continue receiving emails. You can enter the password 100 times a day and still will not receive emails.
Anyone have an answer?

Delete and re-add the account. I just had the same thing happen, and that fixed it. I think it was some error on Verizon's end.

Password issues with my playbook

Hello,
i am a new member trying to get help for recent password issues with my playbook

Is this about exactly the same issue as you just posted about in this thread?
If so, please click on "Accept as Solution" next to my answer, and we can keep the discussion in that other thread (where you've posted more detail than you did here).
Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

Include a system in two different Transport Domain Controller

Hi folks,
I s it possible to configure a system in two different transport Domain Controller?
The two domain controllers will be in the same /usr/sap/trans file system.
thanks,
Má

Hello Má
Firstly to include system in the transport domain you need to have systems sharing common transport directory. Which you confirmed is the case.
Now when you try to change the Transport Domain of the system to make it part of another system it will overwrite current configuration.
Hence you wont be able to make one system part of two Domains.
There is no workaround available best of my infomation.
Regards
DG

Adding a new system to the transport domain

Gurus ,
   currently our landscape is a 3 system landscape . We are SAP BUSINESS SUITE users . we are using ECC 6.0 on AIX with AS ABAP .
   we are planning for one sand box system on AIX with both AS ABAP and AS JAVA . but we have certain confusions and lack of clarity on certain portions . hope over which you all can throw light ,
   - Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
- would be able to add this system to our transport domain without including the system in solution manager
- can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
- How to get more clarity on the license perspective of adding this system
please guide us

1. Will there be any difference in license info for using ECC with AS ABAP (or) ECC with AS ABAP + JAVA .
According to me there is not any differences in license, when you apply for the license you have to select the system as ABAP+JAVA and i dont think that you need to install any license for java in ECC
2. would be able to add this system to our transport domain without including the system in solution manager
Yes if Solution manager is not your domain controller. You can add the system into your domain, For the transport between 2 system is the requriement is that both system should be same relase with Same ABAP support pack and Kernel (as per my understnading).
3. can we make clinet copies from a ECC system with ABAP alone to a ECC system with ABAP +JAVA
This is think might not be possible but not sure for this, becuase there must be some ddic difference in both system.
Please correct me if i am wrong.
Regards,
Subhash

Systems in same transport domain, but PRD import queue is empty

Hi all!
I have previously set up ERP 2005 development and QAS system, and there has been some development and transporting occuring between these two systems. Now I have installed the production system and added it to the transport landscape in STMS. The three system are in the same transport domain and the same transport group. In STMS I have created the Delivery route to the PRD system.
When I check the import queue for the production system, only transports created AFTER the installation of the production system appear in the import queue. Transports created and released from DEV to QAS before the production system was available is not displayed in the queue.I know that I can add single requests to the import queue easily, but that required a lot of manual work and making sure that the transports are added to the queue in the correct sequence.
How can I get all the transports to appear in the PRD system import queue? In AL11 in PRD, I am able to access the TRANS_DIR and I see all the transport requests in the directory.
Regards,
Thomas

Hi Thomas,
"Only transports created AFTER the installation of the production system appear in the import queue." - <b>This is expected</b>
From table E070, you can get a list of all transport imported into QAS system. Sort that list according to the date imported, and save the transport requests into a text file.
Run this below script from production by logging in as <sid>adm.
Provide the transport text file as an input to the script. It will add the transports to queue automatically one by one.
@echo on
set SID=<Prd SID>
set CL=<Client>
set filename=<drive>:\usr\sap\trans\scripts\transports.txt
FOR /F "tokens=1,2* delims=K" %%i in (%filename%) do (
tp addtobuffer %%iK%%j %SID% client%CL% pf=<drive>:\usr\sap\trans\bin\TP_DOMAIN_%%i.PFL >> )
Before running the script, take a backup of the production buffer at the OS level, incase u need to restore it.
Cheers,
Fahad

How to include virtual system in transport domain

Hi all,
I have my development and quality servers running on one instance.at the time of configuring STMS,i have made the transport domain and included both the systems.Also i have configured production system as the virtual system.Now i have installed the production system on a different host with a different transport directory and want to include this system in the transort domain.in a way the virtual system will be replaced.
How should i do it.
Regards
Praveen

Hi Praveen,
If you want to include a system in your existing transport domain, just login into the system, in T-code STMS you will get a POP UP choose other configuration ,it will ask for-:
System
Description
Target Host
System Number
Save the settings and wait for some time it will automatically added in your Transport Domain.
Reward Points if find it useful.
Thanks,
Prashant.

Password issue in Transport Domain

Similar Messages

Maybe you are looking for