Password latest Leopard installation nightmare

After much difficulty, I now have Leopard (10.5)installed on my PB. However, the "login" screen does not recognize my name/password combination(s).
Yes, I did the "password reset" after booting from the Leopard retail disk. Apparently, what I put in does not match my "keychain." I assume that's why I get a login screen?
I've tried again booting from the Leopard disk (perhaps to run Disk Utility or again reset passwords) but for some reason holding the C key during start-up no longer boots from the disk. I've also tried connecting with FW to a MacPro as FW target (holding T key) but this also no longer works.
Booting from the disk and booting as a FW drive on the MacPro both worked previously. Can't figure out why it no longer does?
In summation......
1. I'm getting a login screen because the password is different from my keychain?2. Leopard does not recognize my name/password combinations (even though I reset them right before rebooting)
3. I'm no longer able to boot from the Leopard disk (retail version) nor as a FW drive on a MacPro.
Incidentally, I reset the RAM chips but that hasn't helped.
What could I possibly be missing?
Hope your New Year is happier than mine thusfar and I greatly appreciate any time you devote to trying to help me.
Terry D

Terry: Can you connect the Powerbook to the Mac Pro in FireWire Target Disk Mode and back up all the important files from the PB's drive onto the MP's drive? If so, do that. Then boot the Powerbook to the Leopard DVD in the external FireWire optical drive, and use Disk Utility on the DVD (it's in the Utilities menu in the Installer application) to partition the PB's drive using the Apple Partition Map (do not use the GUID partition map) and create a single Mac OS Extended (Journaled) partition. Then install Leopard onto it.
If you can't back up the PB's drive to the MP's in Target Disk Mode, you'll have to remove it from the PB and connect it directly to the MP via an external enclosure or USB adapter to back up the files. Then put it back into the PB and proceed as I've outlined above.
Don't involve the MP in the installation of Leopard on the PB — without hashing over all the details, I'll just say I suspect a lot of your problems may have arisen from the way you did that the first time.

Similar Messages

  • Cannot reset Root password from Leopard installation DVD

    User installed Leopard with the Upgrade option, and discovered his administrator user account had been reset to standard, as described in
    http://docs.info.apple.com/article.html?artnum=306876
    However, when the user tried to follow the instructions for the password reset utility, he discovered that the User account selection pull-down was grayed out. So he cannot select the Root user, or any user account to reset the password.
    All user account have been set to standard and there appears to be no Root user.
    What next?

    Sorry. Wrong forum. Reposting.

  • Leopard Installation Nightmare - Mac Pro

    I have a Mac Pro running 10.4 with plain vanilla everything (hardware and software). I started an upgrade install with Leopard today (so excited!) only to have it abort when it was nearing completion of the DVD verification phase. When it rebooted, the old OS (10.4) could no longer boot from the hard drive, and the Leopard DVD had no luck mounting it. I tried a repair from the DVD with no luck -- all I got was a "Checking catalog; keys out of order; Repair or Verify Failed; First Aid failed" string of errors. When I try to boot from the hard drive I just get the Apple and spinning circle for 3-4 minutes until the system shuts down.
    Help! Please! I don't want to delete and entire drive of personal files!

    Here's a thread you might want to check out.
    http://discussions.apple.com/thread.jspa?threadID=1212243&tstart=0
    Its a collection of information talking about about how to prepare for a successful install.
    There's also a collections posts from people (from these forums) talking about how they solved their install problem, or how they had a successful install. Should be helpful if you're motivated to read through it.

  • Turning Airport On/Off prompts for password after latest Leopard update

    After installing the latest Leopard update I'm getting prompted for my password to turn Airport on or off. While it's not a big problem it is a bit of a nuisance.
    Message was edited by: Hardbap

    Thanks for the help.
    1 - yes (see below)
    2 - no
    3 - yes
    Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    2008-11-20 11:28:30 -0500: Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    2008-11-20 11:28:30 -0500: Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    2008-11-20 11:28:30 -0500: Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    2008-11-20 11:28:30 -0500: Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
    2008-11-20 11:28:30 -0500: Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r--
    Message was edited by: Hardbap

  • Upgrade HDD using Time Machine, but no Snow Leopard DVD, only Leopard installation DVD = kernel error on startup

    Hi guys and girls.
    Background
    I have a MacBook Pro (March 2009 vintage).  It was loaded with OS X Leopard on a 250GB HDD.  When Snow Leopard was released, I upgraded using a DVD bought from Apple.  In time, I added an external USB HDD to use for Time Machine Backups.  I am now, however, knocking up against the capacity limit of the original hard drive.
    Given the above, plus the fact that I no longer appear to have the Snow Leopard DVD (upgrade version I believe) - what is the recommended way to get back to my old setup (files, OS, settings etc), but with my new, larger HDD?
    So far I have tried:
    1. Formatting new HDD as Mac OS Extended (journaled), GUID partition having booted using my original (Leopard) installation DVD.  I then selected the latest Time Machine (Snow Leopard) backup.  After a couple of hours of restoring from that backup, the system restarted, but had kernel errors on bootup.
    2. As above, but when formatting, chose to zero all data.  This had the same end result.
    Questions:
    1. Are the kernel errors I'm experiencing due to the mismatch of booting off Leopard and restoring a Snow Leopard backup?
    2. Would finding my (or even a) Snow Leopard upgrade DVD help?  If so, how?
    3. What am I doing wrong generally?  I do like to try to understand these things!
    4. As above, what is the recommended way of doing what I'm trying to do, given the limitations of release DVDs etc.
    Many thanks

    Simplest thing would be to buy the retail SL installation disc ($20 USD) and use it to do the migration. There might be an issue trying to use a SL TM version with Leopard.

  • Need help resetting or changing my admin username and password without the installation disc

    I accidentally clicked on the check box that is located in system preferences in accounts that says "Allow user to administer this computer" and unchecked it. So the account that I set up the user name and password to is not the administer anymore and I don't know what account is. So now every time I want to make changes to anything and click on the lock button it will not accept my username and password. So how do I reset my username and password for the administer without the installation disc and without losing any files or folders????
    Message was edited by: ashkonnor8808

    Those changes require an installation DVD. However, see:
    Forgot Your Account Password
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

  • HT201240 Re: OS X: Changing or resetting an account password (Snow Leopard and earlier)

    Can someone help please! I cannot log in to my Mac
    Followed these intructions from earlier posts this thread, and got to:
    4. Select your Mac OS X hard disk volume. DONE
    5. Select the user name of your original administrator account. COULD NOT COMPLETE
    - But my original administrator account is not showing. The only option shown for me is "System Administrator (root)".
    Luckily I read the note below: Important: Do not select "System Administrator (root)".
    So now I wait for further advice...

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password,
         OS X- Changing or resetting an account password (Snow Leopard and earlier).
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

  • Mac-Windows-Connection failes after Snow Leopard Installation

    I am dealing with 4 PCs at home – an IMac, a MacBookPro, a Dell Dimension and a Dell Precision Workstation. Before I installed Snow Leopard I could connect easily from my Macs to my PC via “Connect with Server” and the “sudo pico /etc/hosts” hint to rename my Windows-PC to real names (e.g. Dimension and Precision). After the installation I am prompted in OS X to give my account name and password again! And, of course, I don’t work anymore (wrong user name or password error). Because I put those information in long ago, I am not quite sure if I am putting the wrong Name/Password info in or if something happened during the Snow Leopard installation. I was never quite sure if “Name” meant the name of my Windows account I want to log into, or my Mac user name or a combination of both or the Server /Name thing, e.g. Dimension\Name. Just for info: My Windows-PCs can still connect without a problem to both Macs.
    Any help is appreciated what information exactly to put in that **** Name/Password box that appears if I want to connect to a Windows-PC from my Mac. Or what else could have happened during the Snow Leopard installation that cut of the former available ability to connect to my Windows-PC from OS X.

    I was able to see the other Windows XP computer and begin to connect. I was then presented with a login screen. I tried using the usual user name and password - no luck. I then formatted the user name as as follows:
    user name: computer name\user name
    password: as normal
    And it worked. Specifically in my case:
    user: cwy-pln2152\administrator
    password: planning
    This is what worked for me your mileage may vary.

  • Lost applications due to "Erase and Install" option in Leopard Installation

    I bought a new Macbook this morning at my local Apple Store, and they gave me a Macbook running Tiger as well as a Leopard Installation Disk. I wanted my Macbook to be just like new, so I called Apple Support and they told me to do an "Erase and Install." After I followed their directions and was finally running Leopard, I noticed that I lost programs: Garageband, iPhoto, and iMovie to name a few.
    How can I get these applications back?
    And it is absolutely ridiculous if I have to buy iLife '08 because I had these programs already on my computer with Mac OSX Tiger before Apple told me to "Erase and Install."
    p.s. I received 2 other disks that seem to be of no help...2 Tiger Installation disks.

    Ok if you purchased a new macbook reload the original os x tiger restore cd's you have to hold the c key at startup to boot from it format and reinstall mac os x tiger then once os x tiger is installed update to the latest version of tiger first then connect a external hard drive and use carbon copy cloner to backup your hard drive the reason for this is when you upgrade from tiger to leopard the os has a high tendency to remove the idvd and garageband content so none of your ilife apps will function after the upgrade this is why you need the external with it the first time you install mac os x leopard it will ask do you want to transfer your settings from another partition on this mac select this option and select the external and everything will be fine

  • Trouble booting from Leopard installation DVD

    I'm having some trouble booting from the Leopard installation DVD, I was wondering if anyone here could help.
    I want to reset my administrator password since OS X does not seem to be accepting it, and I heard that the best way to do this would be to boot from a Mac OS X installation DVD or CD and change some settings. When I start up my computer with the Leopard DVD in the drive, I hold down the 'C' key after the chime, and continue to hold it until the spinning gear appears.
    From there, the spinning gear stays on the screen, and nothing happens. I've heard that it takes a while for the screen to come up, but I let it sit for over three hours and nothing happened. I also tried holding the Option key at startup and selecting the DVD, but the same thing happened. The DVD is in good shape and has no deep scratches, and it appears right away in the OS itself. I can't access the installer from the OS since it asks for my Administrator password, which it does not seem to be accepting. I also tried another solution to the Administrator password problem that involved typing some commands in Single User mode, but that did not help either.
    Any help would be greatly appreciated.

    what exactly did you try to do in single user mode?

  • How can I create a disk image of snow leopard installer disk from my Imac which runs it?

    how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

    You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

  • After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.)  Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

    After installing Leopard, my G4 will no longer boot in OS 9.22.
    (Classic still works, but I need it to boot in OS 9.)
    Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
    Details:
    G4 Gigabit Ethernet
    Boot ROM version: 4.2.8fl
    Accelerator card added: 1.6 MHz
    1.5 Gig Ram
    I have erased the partition that had Leopard installed on it.
    I zapped the pram.
    In Open Firmware, I "reset-nvram", and then "reset-all"
    I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
    I tried restarting from 9.2.1 DVD.
    I tried restarting from an external firewire drive containing OS 9.2.2.
    I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
    All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
    This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
    I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
    Any help greatly appreciated.

    Thanks for checking in, BDAQua.
    Problem solved.
    In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
    "If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
    The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
    Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
    Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
    So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
    Gratefully,
    tupester

  • Snow Leopard installation on Mac Mini has failed

    Hi,
    Does anyone know whether Snow Leopard checks what hard disk is installed in order to satisfy installation requirements as I've fitted an SSD Hard Disk Drive in my Macintel Mac Mini and installing Snow Leopard has failed (no longer boots into any Operating System previous nor upgraded. (Mac OS X 10.5.8 previously installed)).
    Thank you for any advice.
    Best Regards.

    It may not have anything to do with a new drive installation. Snow Leopard has just "bricked" my Intel Mac Mini hard drive - the original one. The first attempt at installation failed, so I tried an erase and instal. It seemed to work - briefly but when I tried to restore apps and settings from a Time Machine back-up it "hung" with only one minute of restoration to go. Now the HD appears to have failed, since it is unable to find any system folder and booting up via the Snow Leopard disc and bringing up the disc utility shows a greyed-out HD drive.
    Some people on the MacBook Pro forum report a similar problem with the hard drive after Snow Leopard installation.

  • Leopard installation hard drive issues

    I recently bought a iBook G4 (2005 model) on eBay under the impression it was just missing an OS. Armed with a copy of Leopard (yes I bought it ) I tried to boot it up for the first time.
    The first time I was faced with the Open Firmware screen, and errors that seemed consistnat with a faulty airport connection. I took it all apart and removed the airport card, then while booting I pressed Option to get the list of boot options. Booted to the Leopard DVD and after a disk check it seemed like it was working fine.
    However just as it was about to begin the actual install process it cacked out with a massive Installation Failed! message. The install log said the error "Could not unmount" was to be blamed. Tried using the disk utility to verify the drives but it spent ages doing nothing. Repair wouldnt work and neither would erase, they gave me the same issue.
    So that was it for the night. Gave up to try another day. Next morning trying to do the same thing after changing nothing, I was faced with the "You must restart your computer" message just after the language select screen on the install DVD. Why did this suddently change?
    Took the harddrive out to check the connection was ok, seemed fine so put it back (didnt get the chance to plug it into my pc like I hoped, was missing the right adapter). Now with everything back in place, if I press Option on boot I dont even get a list of harddrives/cd drives anymore... just the two arrows and other than that a blank screen.
    If I try to hold C while I boot to go straight to the disk then it shows the white loading page with the apple logo, but after an hour it hadnt moved on from there. The whole time the hard drive is making a loud clicking noise.
    It seems each move I make I go backwards a little. Who has some suggestions that dont involve paying a spotty berk in the local shop $300 just so he can crack open Google, find this support post and fix it for me at a profit
    I believe the HDD may be fried, but dont know how to check. It seemed to recognize it in the Disk Utility the time I got that far, but dont know why it no longer recognizes it.
    Message was edited by: pjsturgeon

    For us it was Versions cannot be switched off (decreases security).  No "Save As" in many Apps, no Bounce in Mail.  10.7 felt “dumbed down” to us.  We will try later, (10.8 maybe).
    This is what we did in our office, from Kappy:
    To switch from Lion to Snow Leopard:
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

    Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

    Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
    1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
    2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

Maybe you are looking for