Password limit almost reached but need to save data

My wifes phone has locked up on her. She has put in her password 9 times, and because the "o" is not working and is part of her password, if she puts it in one last time and it isnt accepted its gonna be wiped.
I hasn't been synced with any of the computers we have in our house. If i try to sync it to the computer to acces some info that is only on the phone, will I be able to retrieve it or will I lose everything?

If, when you tether to the PC, you enter the password correctly via the PC keyboard, then the counter will reset back to 0 and you will be able to take that backup. If you are not successful when you tether, then it will wipe clean. The counter is the same regardless of entry via the BB keyboard or the PC keyboard (when tethered).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

What happens whens password limit is reached?

I know password prompts come even after reinstalling the os. Now when the limit is reached data swipe is done, does it still prompts for password?

varunja wrote:
I know password prompts come even after reinstalling the os. Now when the limit is reached data swipe is done, does it still prompts for password?
No ! If you enter wrong device password and your device undergo a Security wipe then after a wipe it will be as like as new . You have to setup all over again.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I need to save data on FP-2000, how can i do that?

i read measurements from FP-TC-120 and i need to save them on the fieldPoint memroy, and read it once a day,
how can i save the measurements and read them when i need?

There are various documents at the NI Developer Zone that explain how to log data in a FP-20xx controller.
These examples and tutorials explain in detail how to do this.
In general, once you have got the value from the FP I/O Module in the LV Program, you can use the File I/O VIs to save this information to disk.
Please refer to the NI Developer Zone page
URL: http://zone.ni.com/zone/jsp/zone.jsp
and use the search engine (type the words "fp" and "log") to get the documents that explain how to log data in an FP-20xx.
The URL to these documents is shown below:
http://search.ni.com/query.html?col=alldocs&layout=Zone&qp=section%3Adevzone&qt=fp+log
I hope this helps.

I designed a template in Indesign but need to save it in a format that can be easily updated by my client. What are my options?

I designed a template in Indesign and tried to save it in Word for my client but the formatting is all messed up. I'm not surprised since Word has quite a bit of formatting restrictions. I am now thinking about PowerPoint. Do I have any other options? Thank you!

helencia wrote:
Do I have any other options?
Other options for your InDesign-built template? Not really. It's only of use to a user of InDesign. If your client's need was an MS-Office template, you really should have just built it properly in the appropriate MS-Office application. There is no reason you can't; and it's your only remaining, truly viable "other option."

Aggregated planning in SNP...almost there but need more guidance...

Gurus,
I am working on Aggregated SNP for our company.
1. I have created a Loc Prod hierarchy. The hierarchy has 1 real Location under a pseuso Location and has 6 real products under pseudo header product.It looks like the screenshot below.
2. I do not have a PPM hierarchy or a Resource hierarchy
3. I run the Location heuristic for the header AGG_MFIBER@ Location 1010. I get the correct Pl orders for the header product. The Source Determination is set to Only Sub level.
4. I am able to disaggregate the header values to the sub-products fine.
5. But when I look at the Planned orfders for the sub products I see that there is no source of supply even though I have the PPMs for them.
Do I need to create a PPM hierarchy and then disaggregate it for the system to get the lower level PPMs?
I will work on it next week but if I can get some help it will save me a great deal of time.
Thanks in advance,
Subash

Hi Cyrille,
How are you? It has been long....
This may end up in a long exchange....
1. I struggled for sometime before I was able to set up the LOC Hier and PROD Hier and generate the LOCPROD Hier, as my screenshots show.
2. I was able to run SNP for AGG_MFIBER and then disaggregate it to sub products. That is when I found the source of supply issue. I saw that the Header product did not have a SOS and created an SNP PPM manually. This is just after I posted the message.
3. After that I tried to create a SNP PPM Hierarchy. I was able to add AGG_MFIBER to level for header PPM. After that I added all the sub products in the above LOCPROD Hierarchy and was able to save the same. I went to the edge table /SAPAPO/RELDHPPM and saw 57 entries.
4. After that I ran SNP for AGG_MFIBER with Source Determination at 'Only Sublevel', the system created planned orders to cover the requirements but it still did not pick up the source of supply for AGG_MFIBER.
5. Then I changed the Source Determination from 'Only Sublevel' to 'Only Header level' and executed SNP. This time it put ONE planned order only for the header material in the second period but it did pick up the Source of Supply.
Still trying to understand the logic...
Any ideas here as I try to get further...
Thanks again,
Subash
Message was edited by: Subash Nanjangud
Cyrille,
After working thru the day on this issue I have been able to make things work...I will update the details tomorrow morning..
Thanks,
Subash

Need to free up space on iPad but want to save data

Hello,
I need to free up space on my iPad and the biggest hogs (no pun intended! ) are my 5 Angry Birds apps -- over 1 gig of apps and data. I would hate to lose all my progress. If I delete them off the iPad, I know I can still reinstall them but will my data also be reinstalled or will it be lost?
Any way to save all that -- ahem -- work?
Thanks much!
Helene

If you backup the iPad, your game progress will be stored in the backup. The only problem with that is, the next time that you backup, the previous backup will be overwritten and then you will lose the game progress in the apps because the deleted games and game progress will no longer be on your iPad.
I was once seriously into gaming, it is work. I know how much "work" you can put into video games.

Home share almost there, but need HELP!

I have one Win7 laptop and one XP laptop. Setup home share on each (share is setup on both computers, authorized both, same local net). XP laptop sees the other computer's share and when I click on it I see the songs/files just as expected. However, on the Win7 I can see share name of the XP computer but when I click on it, it does not show anything only acts like its loading then positions the cursor back on the music tab. nothing showing under the share.
Any ideas? I've turned off my virus protection (Security Essentials), rebooted, stopped and started the share, plugged directly into my router.....no change.
I was previsouly on version 9+ on both systems and it did not work and now I'm on the latest version of Itunes for both systems.
Help!

However, on the Win7 I can see share name of the XP computer but when I click on it, it does not show anything only acts like its loading then positions the cursor back on the music tab. nothing showing under the share.
Hmmmm. Experimental advice, but perhaps have a check through the following document. (In principle, a LSP issue might stuff up Home Sharing, although I've not met an example of it in the wild yet.)
Apple software on Windows: May see performance issues and blank iTunes Store

Help! Need to save data from field point in excel sheet!!!

Hey colleagues,
I need help. I am writing on my diploma thesis.Main topic is to develop a visualization of a process of a process plant which is used for an internship in uni. My meain problem is that I need a vi where I can save my fieldpoint data only in special cycles. At the moment I use a vi which can only save every second in form of a while loop and a metronom. I am searching for a vi where I can choose the time between every saving step in excel. In addition to that I would like to have a boolean button where i can start/stop the saving within running process.
please help me urgently!!!
Marco

Hello Marco,
the answer
for your problem is called “Software Control Timing”.
If a
desired time has elapsed, you can write data’s to a file.
The explicit
timing is the timing for your while loop, e.g. 10ms.
If a
desired time has elapsed, you get a flag from a timing-function and an
additional block of your code (e.g. a subVI) will executed.
The set
time for the timing function is settable dynamically, while your program is
running.
Find the VI
in the attachment, which will provide this functionality for you.
I hope this
VI will bring you further ahead…..
Have nice
day…
Ulrich
AE-NIC
Attachments:
SoftControlTiming.vi ‏41 KB

Screen Died, Need to Save Data. Help?

Hello,
The screen on my macbook air died. The computer seems to be working fine though. Only problem is I have no way to see what I'm doing to try and move the data from my macbook air to one of my other computers.
I've tried to use a USB adapter to connect it to an external monitor, but with no luck. I also tried to put it in some sort of 'target mode' using an ethernet wire, no luck either.
I'd really appreciate any suggestion you may have.
Thank you! ^.^

Sorry this took forever to answer, yes I gave it a go and it worked!
Thank you!

I need my iphone data but i forgot my new password

im on ios 6.1.2 and i forgot my new password i made and i need an important data from apps inside it
please help !

Well, unless you can remember that passcode & if you don't have a backup, your data is gone. The whole point of the passcode is to protect the data on the phone, & if there were an easy way around the passcode, there wouldn't be much point in having such to begin with.
To remove the passcode, you'll have to force the phone into recovery mode & restore it. If no backup, you'll be restoring as a new device. This will erase all data on the phone.
You can also login to iCloud.com, from any computer, locate the phone...if you have Find My Phone turned on, then erase it.

Save data on pda project mi7.1

Hi,
I able to get data from doe to my pda but how can i pasting data to backend using webdynpro? Any query need to be create under services? I just need to save data to backend table without need the output data.
I have a data object that only have bapi wrapper create only. I use query at my handheld project but no success. Is that a way to insert data to backend table?
Useful help will be reward point.
thanks.
Edited by: fcgan on May 3, 2008 4:55 AM

Persistent project data needs to be stored in sequence data, NOT in global data or frame data.
Take a look at the examples from the SDK and also the manual, it is explained quite well in there:
GLOBAL, SEQUENCE, AND FRAME DATA
After Effects allows plug-ins to store data at three scopes; global, sequence, and frame. Consider carefully where you store information; choosing poorly can impact performance, or make your plug-in confusing to the user. Use global data for information common to all instances of the effect: static variables and data, bitmaps, pointers to other DLLs or external applications.
Store anything specific to this instance of your plug-in (UI settings, text strings, and any custom data not stored in parameters) in sequence data, Use After Effects’ memory allocation functions.
Frame data is used for information specific to rendering a given frame. This has fallen into disuse, as most machines are capable of loading an entire frame into memory at a time. Of course, your IMAX-generating users will still appreciate any optimizations you can make.
PERSISTENCE
After Effects saves sequence data in the project file, but not global or frame data. Pointers within sequence data which point to external data are, in all likelihood, invalid upon re-opening the project, and must be re-connected. We call this process “flattening” and “un-flattening” the sequence data.

How ti save date/time info into .lvm

Hi,
i need to save date/time info (Date:Time) into one .lvm together with my other signals (dynamic data). any suggestions?
it should look like this for example
results.lvm:
date/time signal 1 signal 2 signal 3
01.01.2005/12:00 2.2 3.3 4.4
01.01.2005/12:02 2.4 3.4 4.5
01.01.2005/12:04............
and so on for every loop.
thanx in advance
vedran divkovic

The LVM Express VI was designed to be easy to used. To facilitate this, data formats are fixed and cannot be set by the user in the Express VI. You have several options to get the format you want.
If you don't need all the header information in the LVM file, roll your own code. If you are only saving one line of code at a time, this is particularly easy. You will also need to write your own read code, assuming you are not just using Excel or something similar.
Use the formatting capabilities of your analysis program to create the date code. Excel, for example, is perfectly happy to generate a time/date string based on a simple number. You may have to convert from LabVIEW absolute time to Excel absolute time, but that is fairly trivial. You can make a macro to do this.
If you need the LVM header info, write the file using no data to get the header, then fill in your data with your own formatting. Read-back will be harder, since you will need to write that yourself. However, you can probably get most of the info from the LVM file read (maybe with an error), then read your own formatted data from the end of the file.
WARNING: this one dives into vi.lib code. While you cannot change the formatting in the top level of an LVM file, the subroutines do take formats on a per-column basis. So, you can modify the original code to do what you want. Open the front panel, then search for ex_SignalsToSprdsheetStr.vi. Give it the format string you want and you are off. Note that this format will be in place everywhere you use the LVM code unless you save the entire hierarchy to a different location (using Save With Options->Development Distribution, include vi.lib files). Be very careful with this. You can easily get into cross-linking problems (linking VIs from the wrong location).
One final comment. You can find the specification for the LVM file format in Specification for the LabVIEW Measurement File (.lvm), Version 1.0. It includes everything you didn't want to know about the LVM file format.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Need links for data structure and algorithms.

Hi.
I am just new to java but need to learn data structure and algorithms.
Do your guys got any good links or bbs to learn?
Thanx in advance

http://www.amazon.com/exec/obidos/tg/detail/-/1571690956/ref=cm_huw_sim_1_3/104-7657019-1043968?v=glance
http://www.amazon.com/exec/obidos/tg/detail/-/0534376681/ref=cm_huw_sim_1_4/104-7657019-1043968?v=glance
http://www.amazon.com/exec/obidos/tg/detail/-/0672324539/ref=cm_huw_sim_1_2/104-7657019-1043968?v=glance
http://www.amazon.com/exec/obidos/tg/detail/-/0201775786/qid=1060946080/sr=8-1/ref=sr_8_1/104-7657019-1043968?v=glance&s=books&n=507846
$8 for the first

Need to move data only by company code wise to another client

Hi All,
I need to move data from DEV client to one of PRD clients.
There are two scenarios:
1. The scenario is we have 3 company codes in DEV but need to move data of only 1 company code (that too customizing data).
2. We want to move data, date wise also (i mean from 1 JAN to till date).
Is there any possibility in SAP to do this?
Thanks
Disha

"As I said above, production system should not be build from quality/development system in any way either by client copy or ALE or any other means."
@Sunny
Not necessarilly correct in all cases. Purely depends on what data is being discussed here. ALso depends on how Business processes have been defined. In lot of projects master data like GL Accounts,Cost Centers,Profit Centers etc is created in Development and ALE'D to production. You can also move a lot of data via transports (cutomizing). Depends on what data is being discussed. Transaction data ..yes you would never do that . But customzing and master data you can; provided you have fool proof processes in place and have a good understanding of how ALE works for the concerned data !
Coming back to the question :
Yes you can do it. Never do it for transactional data. A lot of garbage might have been created. Master data if you are really happy with the quality do it via ALE (but do it first on a test box) . Make sure however that all the relevant customzing is in place. Sequence is import. What got created in DEV first must go to prod first or else you would have errors which of course can be solved but then why take the pain. Involve your FI-CO guys and Business process owners before you do it. Be a bit careful with chart of accounts !
As I said try it on a test environment first..
And why are people suggesting to use TDMS when it was mentioned that only customzing data is involved! Why did SAP create CTS then if customzing has to be moved via TDMS !! Or is the old point frenzy back again !
Regards.
Ruchit Khushu

My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

Then try DFU mode and then restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Password limit almost reached but need to save data

Similar Messages

Maybe you are looking for