Password Lock - How do I extend the lock device beyond 30 minutes?

It is very annoying that after 30 minutes the Q10 automatically locks itself and the password has to be re-entered. During a working day can be frustrated. In settings there seems to be no way of extending it beyond 30 minutes.
With my old bold it wasn't necessary to keep doing this.
any ideas?

If you are connected to a Blackberry Enterprise Server at your employer this might be a setting they enforce and you can't change this.
If you only use your Q10 privately you can switch off the password completely.
BTW, this is a security feature. If someone finds or steals your phone and if it never locks, everything can be read out.
We have a company policy to lock the device after 15 minutes.
Blackberry Engineering in Switzerland - Dexion Services AG

Similar Messages

  • How do I extend the time before re-entering password.  I have it set of one hour at present but would like to extend that.

    I have a 2014 Mac Mini 1.4G, 4GB, 500GB.  I bought this recently but am new to Mac.  How can I extend the down time before having to re-enter my password. I have it set to 1 hr but I need more time because of using it intermittently throughout the day.  I can't seem to get back to where I set that in the first place.
    Help!!
    Ozarksguy

    You can go to System Preferences > Security & Privacy and make your choices:

  • I have a new ipad and want to restore my old..it asks for my ipad password.  How do I find the ipad password?

    I have a new ipad and want to restore my old..it asks for my ipad password.
      How do I find the ipad password?

    What password are you refering to? A passcode lock on the ipad itself or the password for your apple id?
    If its a pascode lock, then:
    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    If its your apple id, then:
    My Apple ID
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • How do you extend the guest network on a time capsule to an apple express?

    I have a time capsule in my main house with a password protected guest network i set up an apple express in the guest house to extend the networks. Unfortunately the guest house / apple express is only amplifying the main house network. I would like my tenant to join the guest network from apple express. Is that possible?
    How do you extend the guest network on a time capsule to an apple express?

    I would like my tenant to join the guest network from apple express. Is that possible?
    Sorry, but Apple does not allow the Guest Network to be extended in any way.

  • HT1310 How do I extend the delay to support Bluetooth keyboard use?

    When using the startup manager (http://support.apple.com/kb/HT1310) and a BT keyboard, the keyboard never associates fast enough to catch the Option key (if it makes a difference, I run my mac with full disk encryption). How can I extend the window of opportunity for the option key?

    I should probably be a bit more clear
    When the machine boots, and I hold down the option key, it will fail - straight to the full disk encryption password dialogue box.  If at this point I restart the Mac, the option key will work the second time and allow me to select e.g. my Boot Camp Windows partition.
    My theory is that both of these events occur somewhere before OS X is loaded, and that the BlueTooth keyboard and mouse are visible by the smart boot / openboot system.  Some of this must be true because I can use the keyboard and mouse within the smart boot menu to select which boot option to use.
    What seems to be happening is that the BlueTooth pairing event is taking longer than the 2 nanoseconds that the system waits for keyboard input before trying to load the default operating system.
    What I'm trying to work out is whether the boot can be delayed in some way to allow for the BlueTooth pairing to occur at the boot menu level and the option key to be pressed.  We know that this does occur the second time around, so it's simply a matter of time, and would make the whole boot system that much less painful.
    In the meantime, I'm going to much around with something called Boot Champ, which seems a bit of a hack but hey, if it works, right?

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    You can't. It's not your network.

  • I have an icloud account that i am trying to delete or change the email on it and i lost the password.  How can i delete the account if i lost the password?

    I have an icloud account that i am trying to delete or change the email on it and i lost the password.  How can i delete the account if i lost the password?

    You can't and shouldn't.  This is what you should do:
    http://support.apple.com/kb/HT2204
    http://support.apple.com/kb/HT1920?viewlocale=en_US&locale=en_US
    http://support.apple.com/kb/HT5621
    http://support.apple.com/kb/HT5312

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • How do i extend the bandwidth of my system

    The control problem I am having is extending the bandwidth of a force control system. The system is used to apply mechanical load to bone to facilitate research into Osteoporosis. The following concisely describes the system and the different things I have tried to solve the problem,. I imagine it is quite lengthy compared to the usual questions but any advice you have to offer to a Mechanical engineer would be much appreciated.
    System Description:
    I am using Labview (with Flex motion) to program the NI 7344 motion control servo board (PID update rate of 62.4 micro-seconds). This output signal is then amplified by the MID 7654 power amplifier, supplying current to a Voice coil (this can be considered as a Linear DC motor with a bandwidth of 40Hz). This applies the force to a bone sample. Feedback is then provided by a load cell and connected to the ADC feedback channel of the servo board. (For full specs of all mentioned components please refer to the web links which are listed at the end of this email!)
    Problem description:
    After optimally tuning the PID characteristics and defining the amplitude and pre-load, I can successfully control a continuous, sinusoidally varying force (frequency 1Hz), however when I try to increase the frequency to 10Hz, the amplitude of the output waveform is marginally reduced�i.e. there is attenuation. I know that the bone sample is not viscoelastic enough to act as a low pass filter. The bandwidth of the Voice coil is not a limiting factor either, so�..
    How do I extend the bandwidth of this system?
    The following Paragraph describes some of the things I have tried, which have had some or no influence. Being a mechanical engineer I would be grateful for any expert advice.
    (Note all results have been verified with an oscilloscope where applicable)
    Influential Factors:
    1) Method of programming.
    To generate the wave form a series of points describing one period are written to a circular buffer on the servo board. The points are executed in 10 milli-second intervals and are splined through using a cubic spline algorithm (hence a period described by 100 points gives us a frequency of 1Hz and a 10 point wave gives us 10Hz). All this happens on the servo board in real time. I am confident that although the integrity of the sine wave is reduced at 10 Hz the amplitude is still described within the 10 points and so is not the reason for attenuation. However this does limit the maximum frequency achievable. (I would say the max frequency is about 20Hz)
    2) Redefining the resolution of the of the ADC Feedback
    The 12 bit ADC feedback channel is scanned at a rate of 50 micro seconds (faster than the loop update rate which is 62.4 micro-seconds). Initially the voltage range was specified at -/+ 10 V giving 20/(2^12) Volts per significant bit, however I noticed that when I increased the resolution to the max possible by changing the range to 0-5 V (giving 5/(2^12) volts per significant bit), the amount of attenuation was reduced, however there was still some attenuation there. This begs another question why would this factor improve the frequency response???
    3) PID characteristics
    The system gives an optimum step response when using only a pure integral term and setting Kp= 0, Kd= 0. It seems as though the fastest step response is limited to about 6 milli-seconds. The system is fine tuned and any slight increase in the integral term results in immediate instability. Therefore there is no scope to improve the system bandwidth by altering the PID characteristics.
    Can you offer me any expert advice?
    Considering this information, what would you advise? Do I need a board with a faster loop update rate ?, I have considered using Labview Real Time, which offers a board with a 26 KHz update rate as apposed to the 16Hz (62.4 micro-seconds) provided by the current board). Do I need to use different control algorithms as apposed to PID, if so which ones???
    Any help or advice you have to offer would be much appreciated and could help in the battle against osteoporosis. Should you require more information or would like to speak to me send me an email and I can answer any further questions or give you a ring.
    Regards Duncan Webster
    Email: [email protected]
    Product specs:
    Servo board:
    http://www.ni.com/pdf/products/us/4mo636-637.pdf
    Power amp
    http://www.ni.com/pdf/products/us/4mo642-643.pdf

    Hi Duncan,
    i'm sorry that this answer took this long, but i think a constructive answer which takes a long time is better than a useless answer in a short time....
    For the following thought-provoking impulses we have to consider the signal-change when increasing the frequency. The points which describe the signal get streched over the period. Increasing the frequency enlarges the distance between the points.
    a) The spline algorithm could be the problem here hence the signal does not correctly pass through the points anymore with increased frequency. Therefor the amplitude decreases with increased frequency. Perharps another kind of spline algorithm can be helpful.
    b) Another point can be the control deviation. Since a feedback control system needs a devia
    tion for the control, the deviation gets larger when increasing the frequency of the controlled loop. Maybe the control loop has to set the desired value when already getting to a new point. So the signal could get "washy" and the maximum amplitude is reduced.
    In this case, the "Velocity Feedforward"-parameter could be of use. This parameter is to use with caution for it can have similar effects like a too high chosen integral term.
    c) You can try to set the 7344 to circular contour. Therefor use 2 axis where you use the second axis as dummy (open step). There is a major disadvantage in this setup: since you use 2 axes at the same time, the 7344 can update each axis only with 125 microseconds. But perharps this is sufficient. Either way the parameter of the control loop have to be adapted (integral term reduced).
    d) If the 125 microseconds describend in c) is insufficient, you can try to test it with a 7352. The 7352 can handle 2 axis at a time with a update rate of 62.5 microse
    conds for each axis.
    I hope this answer helps you in solving your rather special issue.
    -Norbert
    NI Germany
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • HT1766 Hi I am trying to restore my iphone from the itunes back up and it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?

    Hi I am trying to restore my iphone from the itunes back and  it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?

    Marrtin S wrote:
    Hi I am trying to restore my iphone from the itunes back and  it is asking me for a password, I don't ever remember putting a password in. how do i get the password reset?
    You can't get it reset; if you could there would be no point in having it. If you have an encrypted backup there are two ways this could have happened:
    You checked "Encrypt Backup" in iTunes at some time in the past, either intentionally or by accident
    You have a corporate MS Exchange account and your Exchange administrator installed a security profile on your phone that requires the phone'a contents to be encrypted. This, in turn, requires the backup to be encrypted for obvious reasons.
    In either case you were prompted for a password the first time you backed up after whichever of these happened. So think about what you might have entered for a password at that time. Fortunately you get an unlimited number of tries. Other threads on this subject have shown that it is always a password known to the user, so it wasn't something made up by iTunes. Also, everyone who has figured it out has found it to be a different password type, so try your Apple ID password, your computer's login password, your WiFi password, your corporate domain password, etc. And try passwords that may have been changed since your first backup. As a last resort there is a professional password cracker available, but it isn't cheap - it's targeted at the law enforcement market - from Elcomsoft. There are also some scam password crackers available that don't actually work and possibly steal your information. It's likely that a developer of one or more of these will post a response with a link (possibly hidden) to their "product". So before clicking any links you might want to install the Web of Trust plugin that keeps track of scam sites and warns you. http://www.mywot.com.

  • On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password.  How do I get the keyboard to appear??

    On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password.  How do I get the keyboard to appear??

    On your iPad, delete the existing account then sign back in with the new ID and password.

  • How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
    Hacks are available to use the USB port on AppleTV1 to access more storage.
    AppleTV2 does not have an internal drive.
    Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

  • How can I extend the range of my chart?

    I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
    My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
    How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
    Thanks!

    "I want to add some series that are missing from the chart. How do I do that?"
    Here's a two step process to do that:
    Select the chart to show the the data selection on the associated chart.
    Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
    Grab the control handle (small circle) at the bottom right corner of the selection, and drag  right, as indicated by the blue arrow.
    Result shown below.
    Reassign colours and do other formatting as desired.
    Regards,
    Barry

  • HT1689 How can I extend the number of times my phone rings before going to answerphone

    How can I extend the number of times my Iphone 4s rings before it goes to answerphone

    Call you carrier and ask them how you can change this.  The number of rings before voicemail kicks in is set by your carrier.  Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

Maybe you are looking for