Password lock out I have Vista

My computer won't take my password and I don't have a recovery disk.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Unit.
We will surely assist you with this.
Originally the Unit will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Unit
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Unit at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Unit at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

HT1212 how do i reboot an i phone when its locked out i have tried both ways DFU and also the way listed on the apple site

how do reboot an i phone after its locked out i have tried both the apple list and a DFU and both do not let me delete and start over

iOS- Troubleshooting update and restore issues
Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The iPad should begin to start up.

STARTSAP_NBAS DDIC password locking out

Guys,
We are doing 4.6c upgrade to ERP6 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out.
When we tried to login to the system using GUI through DDIC we can login but when we try reset the password in SU01 we are getting syntax error " The data object "*USH02" does not have a component called "PASSCODE"."
Please help
Reward points will be awarded for helpful answers
Thanks
Santosh

Hi Santosh,
The problem is clear that the table USH02 is not updated during upgrade
so that it is not synchronized with table USR02. Please check table
USH02 and USR02 table in database level, compare the PASSCODE field in
both tables. (most probably there is no PASSCODE field for USH02 in db
level as well). If so, you could do the following:
1. Change the DDIC password to 19920706 at the table level:
    update sapr3.usr02 set bcode='61D26428640DBAB5'
                          where bname='DDIC' and mandt='000';
2. Remove the lockflag
     update sapr3.usr02 set uflag=0;
3. Change the DDIC password to 19920706 for the upgrade using:
SAPUp set ddicpwd
4. Then restart the system, and login again.
Kind regards
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Password lock out

Hi,
I am locked out of my blackberry. I used it earlier this morining and then went back to use it again and my password would not let me in. I am up to my 9th try and it says it will wipe my phone if I enter in one more wrong password. It would be devastating if my phone was wiped as I have not been able to back it up due to a computer crash that took several weeks to fix. How do I bypass the password without wiping my phone? I have the blackberry software on my computer, but its asking me for the password as well. My phone is a blackberry curve 8330.
Thanks,
Lee F.
Littleton Colorado
Message Edited by Jonathan_K on 08-20-2009 03:09 PM

Once you are on the 9th attempt that's it no more turning back you will have to remember your password else your device will be wiped.
My Blackberry keeps blue screening on me.

Entered 9 digit WEP password, locked out of network/router.

Hello,
I was setting a WEP key on a WRT54G router and forgot to put the 10th digit. I put 123456789 real fast and forgot to think, hit submit then I got locked out...I figured the router would not accept a 9 digit key but aparently it does. Trying to connect to the router via that key does not work either, Windows will not accept it as a password. Does the WEP key default to something? or does it place a letter/number before/after if 10 digits was not present? Any help is greatly appriciated. Thanks

Stop trying to connect to 192.168.1.1 wirelessly! You should not try to access the router setup pages wirelessly, this often fails. Instead, wire your computer to the WRT54G, and then login to your router's setup pages at 192.168.1.1 and make whatever changes you need to make.
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
Message Edited by toomanydonuts on 10-12-2009 07:34 AM

SAP NW Solution Manager 4.0 Administrator/J2EE_ADMIN password locked out

Guys,
I was successfully able to install SPA Solution Manager v4.0(ECC 6.0) JAVA+ABAP Stack.
Post Installation, I am tried to logon to the SolMan (User Management & SAP Netweaver Adminsitrator) through HTTP (IE) URL http://<localhost>:port
The homepage displays just fine. When try to authenticate to User Management & SAP Netweaver Adminsitrator using following commbinatioln, the authentication fails.
user = J2EE_ADMIN password = <ADMIN>
OR
user = user = J2EE_ADMIN password = <admin> (Not sure if the password is case sensitive)
Now, I looked at the alerts and found that J2EE_ADMIN user is locked.
Does anyone of you know how to unlock this id and what its password should be ?
Any alternative user id/password can be used to login ?
Should I have to install SAP GUI for Java or ABAP ?
Please help me login to solution manager.
Thanks for your help!!
Chris.

Hello,
as far as I know you can login with a sapgui to your installed system. If you did an standard installation, then the J2EE stack is bound the client 001. Therefore logon as DDIC or SAP* to the ABAP part with SAPGui and unlook the J2EE_ADMIN user.
You had tp specify the passwort of all users during the installation process of SOLMAN 4.0. If you did an standard installation, you only specified one password for all kind of users.
HTH
Frank

IPod touch disabled, password lock out, not appearing in iTunes devices

Hi,
My daughter has entered the wrong passcode on her new iPod touch multiple times and now there is an error message on the screen saying iPod is Disabled - connect to iTunes. When I connected it to iTunes, the following error message appeared : 'iTunes could not connect to the iPod touch because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes'. This is not possible because the iPod is disabled. The iPod does not appear in as a device in iTunes, nor is it visible as a folder on 'my computer'. iPod has never been synched with any computer and it does not synch when connected to my PC. I have tried re-setting the iPod by holding down both the on/off and home buttons but to no avail. All of help I came across directed me to the device in iTunes but it is not possible to do this. Can anybody help?
Thanks in advance.

Place the iPod in recovery mode and restore via iTunes. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Forgotten iPod Touch - Restriction Password lock out

My son has set his iPod restriction password differently to his main access password. However he can't remember what he set it to. Should he delete and reset everthing on his iPod?
Will this allow him to set new passwords to access his restrictions as well?
Regards,

Two choices. If you added the Restrictions passcode after the lates sync (it includes a backup the restore from that backup. Otherwise you will have to restore to factory defaults/new iPod. If the Restrictions passcode in in the backup it willbe restore with a restore from backup.

HP 15-r030wm Notebook PC Bios Password locked out

Could you guys please help me with system disable code. Need password to get into bios. Thank you. I get System Disabled 85434395 on the screen after my third unsuccessful attempt to access the bios.

Hi,
Sorry, my typos, please try:
30592911 (zero, not nine)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an iphone 5, and got it 3 weeks ago. I turned my phone off earlier and its now asking to enter my 'Pin' for my sim and i have NEVER activated a pincode for this sim? i am now currently locked out and have been for the last 2 hours... someone help!!

l

Is it specifically asking for a pincode for the SIM? If so you will need to contact your cell carrier.

Windows Vista Locks out when plugging in Nano 3g with iTunes 8.0

When I plug in my ipod Nano 3g after updating to iTunes 8.0...it locks out my Windows Vista and terminates Windows session. System automatically restarts and will not restart if the iPod remains connected. 5 r's of troubleshooting do not help...I get the same problem. I would probably like to go back to the previous version of iTunes I had, but not sure which one I had? 7.6?

I have the same problem. as soon as I plug my ipod in, I get a blue screen of death., I've tried everything. My 2g nano works fine. tried the umpteen r's to no avail. I hope someone knows what is going on.

I forgot my password and am locked out how can i get back in?, i forgot my password and am locked out how can i get back in?

I completly forgot my password and now i am locked out and have no idea how to get back in??

Connect to iTunes on the computer you usually Sync with and Restore...
If necessary Place the Device into Recovery mode...
See Here
http://support.apple.com/kb/HT1808

Shouldn"t they have some sort of esearch warrant before they go in to my personal space and lock out my music??

I just downloaded 10.2.2 last night. Before that I was having trouble with Itunes mixing up files - I'm pretty sure it happened when I downloaded new versions - it took me a while to notice something was wrong. I would have duplicates of a lot of songs. then I discovered they were not really duplicates - they were songs with some other name attached to it. A techie advised me to turn off the library search in Options and that may have helped. I downloaded 10.2.2. thinking it mighrt be better now but during installation part of the progress meter said something about scanning the library which made me go "Huh?" Now I find that large chunks of my library are simply not available to me to play, burn, or ??. They are still listed in the library but I get a message that says "...can't be located.."
     The ones I can't acess are: 1) an album that my daughter purchased on her computer. I understand we can add each other to our accounts and that will help. but 2) I have a player that burns from vinyl or tapes to disc. Some of those files - not all - are locked out, and 3) an album I purchased online from a recording entity is locked out too. I may have some bootleg files but they, and my old, out of copyright files, don;t seem to be affected.
     What I tried: re-opening the zip files I purchased in Windows Media and then importing them into itunes. etc etc.. More back and forth stuff and I got them to actually play in itunes but when I tried to burn a cd for backup, they wouldn't burn - and now another song that I hadn't had trouble with before, wouldn't burn either.
     I'm wondering what in the world kind of program writers are on this itunes thing.   It is squirrely beyond belief. It appears that it might be some kind of misguided effort to police my music purchases. I just hope I can somehow salvage my LEGITIMATE music before the Igestapo takes it all away.

The ones I can't acess are: 1) an album that my daughter purchased on her computer. I understand we can add each other to our accounts and that will help.
Did you or your daughter copy that album to your computer from hers? If not, then it's not surprising you can't find it. You have to move tracks from computer to computer yourself.
2) I have a player that burns from vinyl or tapes to disc. Some of those files - not all - are locked out
I have no idea what you mean by this. Can you please explain further?
an album I purchased online from a recording entity is locked out too.
From where did you purchase this album, what format it is, and what do you mean by "locked out"?
I can guarantee you that nothing sinister is going on. Apple hasn't reached into your computer and disabled anything. It's either a program error or, as seems to me more likely, a misunderstanding on your part about some issues and perhaps incompatibility between iTunes and the format of some other content you've acquired. If you'll please post back and provide more details, avoiding the unnecessary ranting and hyperbole, someone here can probably at least explain things it not help get them sorted.
Regards.

My kids have set a passcode on my phone and im locked out. what do i do?

my kids have got hold of my iphone 4 and set a passcode and now im locked out, i have tried umptine times to unlock it and now my iphone is disabled, i have tried connecting it with my itunes and it says it needs the passcode to continue. what do i do?

Restore the phone from backup on the last computer your phone synced with, and this will remove the passcode http://support.apple.com/kb/HT1414. If you do not have access to the last computer the phone synced with, you will have to force the phone into recovery mode & restore as a new device http://support.apple.com/kb/HT1808

Forgot paaword to ipod now locked out

Forgot password to ipod touch and now locked out? anyone know what to do next

If You Are Locked Out Or Have Forgotten Your Passcode or Just Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
     If you have forgotten your Restrictions code, then follow the instructions
     below but DO NOT restore any previous backup. If you do then you will
     simply be restoring the old Restrictions code you have forgotten. This
     same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the
          Back Up option. If you have just backed up the device, it is not necessary
          to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup. If you do not have a
          backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

Password lock out I have Vista

Similar Messages

Maybe you are looking for