Password Manager 4.6 and 4.7 causes CPU loop in tzres.dll

T510 running Windows 7x64. T510 is in a constant CPU loop with WMIPRVSE consuming the CPU as per Process Explorer. Using Microsoft Sysinterals Process Monitor determine that the cause is constant calls to access tzres.dll. Reboot in clean mode and one my one activate services and startup programs until the loop is observed. It is only observed when Password Manager is started. Do an uninstall of 4.7 and the problem goes away. Start with 4.0 of Password Manager. Each release from 4.0 to 4.5 work fine with no loop. Installing 4.6 or 4.7 cause the loop. All Lenovo drivers and programs are current.
Any ideas? Tom

I'm testing a beta version of Password Manager which has solved the issue that I was experiencing.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Similar Messages

Do any versions of FF support the use of Lenovo's ThinkVantage Password Manager s/w and fingerprint scanner?

Lenovo Edge 15" laptop running Windows 7 (64 bit) and using Thinkvantage Password Manager Ver 3.20.0330 and TouchStrip Fingerprint Sensor (UPEK).
The password manager is to set to restrict logins to websites to fingerprint but when logging into websites I am not given the option to use the fingerprint reader -(the login info stored in the P/W manager is entered and login takes place). I have seen elsewhere that FF 3.6 has problems supporting this combination and wonder if any earlier versions of FF would be suitable or if FF 4 is likely to support it.
Any help would be appreciated

Kent1968
I would recommend, if you have it set, to go to a restore point before you uninstalled the password manager version that did not give you a problem and not use the new version until this bug is resolved.
If the fingerprint light is not showing up, then it is probably not limited to you and I hope Lenovo checks it out.
Too bad the newer version seems to load slowly - I will check it out as well.
jEdgar

In FF (30.0) Password Manager, when you open Edit, what are all the fields and how do you fill them in?

When you open Edit, there are two choices: Web form and annotated.
What is the difference?
Then, there are fields for Host, Submit Prefix, Username, Password, etc.
How do you fill in these fields?
When you click to have the manager "Guess from Current Page," all fields don't necessarily get filled in, so is it just for username and password?
I use the edit feature constantly, so it's a little odd not to see more detailed instructions here.
When I click on Tools, the Saved Password Dialog is on the list, so it's on my toolbar all the time.
I use it constantly.
What is the latest in password security? I know there are competing ideas. What does Mozilla think?
Thank you.

Hmm, could this be a feature of your extension, "Saved Password Editor"? The support article ([[Password manager - Remember, delete and change saved passwords in Firefox]]) doesn't show those changes when I switch the version from 29 to 30 in the left column.

Password Manager and Fingerprint Software Failure

Hello,
I'm getting these errors when I start Password Manager 4.2
And Fingerprint Software 5.9.8
This errors happened after an update of both applications. I tried to deinstall both an reinstall old versions but still getting this errors.
My Thinkpad:
X61T, Win7 64 SP1

Hello mate,
Have you activated the TPM chip in the bios ?
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Password Manager

I recently removed Client Security because the password manager for internet logins was not working and CSS seemed to be the cause. I have seen many discussions abount password manager but not any solution that was applicable. Is there a way to use CSS and pasword manager on Vista Business SP2 sucessfully? Is there a password manager without CSS and how is it accessed?

Hey 0_hilliard,
What is happening is that you have Password Manager a Thinkvantage tool running on your computer. Here is a link talking about Password Manager.
http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS024984
Best Regards,
Hiro
Did you find a post Awesome? A response just Outstanding? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

HP Protect tool password manager not working with the new version of Mozilla: I got this alert: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program." please help

I have an HP ProBook 4520s. I have been using HP Protect tool's Password manager to store and manage my passords for all Login websites in Firefox 3.6. As a result, I just swiped my fingerprint to log on to any website.
After I installed the version 4 of Firefox, my all my login details do not work anymore. I have tried to reset them but I repeatedly get this error: "Firefox doesn't know how to open this address, because the protocol (dpql) isn't associated with any program."
something like this would have been passed onto the address: "dpql://c:\program%20files%20(x86)\hewlett-packard\hp%20protecttools%20security%20manager\bin\dpminionlineids.dll/qlinkload.htm#id=2".
Although the password manager works with Internet Explorer 9, I need it to work with Firefox 4 as this is my preferred browser.
Please help. Thank you!

I guess this means that IE is more user friendly for HP Password Manager finger swipe recall of passwords, a favorite of mine. I still don't see a post from Firefox as to why they haven't produced fix. So I'll switch to IE until things change. I don't see value in downgrading to a Firefox version that's no longer going to be supported.

If the pop up doesn't appear, can I manually save a password in Password Manager?

Sometimes I make a mistake and don't save a password for a specific site. However, I later wished I had but I don't know how or if I can manually bring the password manager back up and save a password.

If you clicked "Never" then you have created an exception that you need to remove.
Remove site(s) from the Exceptions:
* Tools > Options > Security: Passwords: Exceptions
*http://kb.mozillazine.org/Password_Manager
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

ThinkVantage Password Management Tool Bug Report

The Password Manager gets confused and is unable to handle entering passwords for multiple accounts into applications like Outlook and Office Communicator.
Example: I have Outlook 2010 configured to connect to two different exchange server. When I attempt to log into Account 1, it stores the password and will sucessfully cache the password. When the login prompt pops up for Account 2, the Password Manager gets confused and thinks it needs to update the password for Account 1. I can have it enter the password properly for one account at a time, but at no time will it properly handle both.

The Password Manager gets confused and is unable to handle entering passwords for multiple accounts into applications like Outlook and Office Communicator.
Example: I have Outlook 2010 configured to connect to two different exchange server. When I attempt to log into Account 1, it stores the password and will sucessfully cache the password. When the login prompt pops up for Account 2, the Password Manager gets confused and thinks it needs to update the password for Account 1. I can have it enter the password properly for one account at a time, but at no time will it properly handle both.

Space designer causing cpu spike overload

Hope you guys can help with this, it's beginning to annoy me. I'm currently unable to use space designer reliably. I had this problem in Logic 8 and it's still happening in 9. I have one instance of SD in my current project and it's causing cpu spikes that are giving me errors. The funny thing is that the error happens just after a region that is being sent to the reverb has ended. the cpu meter then gradually rises until the error stops playback. If I turn SD off i don't get these problems or if I disable SD via automation when it's not needed it seems ok also. What the **** is this about? The thing is I really like the sound of SD and miss it when I have to use different reverbs. Anyone else having these issues? I read on another thread that setting all your inputs to "no input" helps but for me it doesn't. What else can I try?
cheers
p

Thanks for your input.
Just to clarify, I am getting the spike once the audio data stops sending through the SD plugin (whilst the song is still playing). So, for example I may send a 10 second bit of audio through the plug - this works fine. Then once the audio stops sending and the reverb trail finishes....I then get the CPU going mad - and yet there is complete silence within the song - there is nothing else playing!
This has got to be a bug or conflict of some kind - my computer spec is massive and should be able to cope with a stereo bit of audio through one plugin! (Hope this makes sense.)
There have been a couple of posts similar but no answers as yet...
Wondering whether it is a conflict with UAD plugins or something which limits the reproduction of this bug...I have noticed that if I remove all UAD plugins from the channel strip in question, the error tends not to reappear - but the issue is unique to the SD plugin.
Danny

Client Security Solution--and Password Manager--no longer autoruns

My T61 was working wonderfully until recent installation of antispyware, antivirus programs.
Prior to that, on boot, I could always see a brief CSS splash screen, and, more importantly, Password Manager would always kick in automatically, to load password data or to ask if I wanted it to remember something.
Now, although Password Manager remains an icon in the system tray, it not only does not detect need for input, hotkeys do nothing, despite being marked enabled.
I downloaded CSS 8.1 from the website (although this was still installed), and ran the "Repair", but still no joy.
Your help is greatly appreciated.

Thanks again--as you suggested, a thread well worth reviewing.
In my case, I opted for the Rescue and Recovery Quick Restore--albeit with much fear and trepidation, since, unlike the roughly equivalent MS System Restore, this feature does not tell the user the date of the restore point that is being recreated.
As it turned out, this took me back to a point when Norton Internet Security was only partially removed--which created the added anxiety of (a) inability to connect to the Internet through Explorer or Outlook 2007 and (b) inability to launch any Office 2007 program! (That last caused yet another twist, since the instructions I had previously followed to completely removed Norton were now saved as .docx files....) Although Norton Internet Security was still present on the desktop, and ccApp.exe was obviously running (and unable to shut itself down on Restart), Add/Remove Programs (the first step in the removal process) would not work--"the module is missing."
Fortunately, I was able to download the Symantec Removal Tool through another computer onto a USB drive, copy the program to the T61, and run it there. (Note that although Explorer would not load fully, Internet access of a sort was still available as witness System Update and Microsoft Update downloading without difficulty--though MS could not complete installing updates for Office 2007 with Norton still in the picture. This matters because the Removal Tool accesses the net.)
Once Removal had done its thing, Explorer, Office 2007, and Password Manager again worked as before.
Sadly, I still don't know what the necessary ingredients for CSS/Password Manager are--there ought to be a listing of what files these otherwise excellent programs require. And I'm not sure what approach to firewall, antivirus, and antispyware I ought to take, given the possibility that the programs I replaced Norton Internet Security with caused CSS/Password Manager grief.
Sigh.

Password Manager 4 and IE9 webpage failure

I have Password Manager 4 installed on my W520 Windows 7 SP1 -64Bit OS. I am experiencing an IE9 failure when accessing a particular webiste; The error displayed is as follows:
I've isolated the issue to the following add-on:
IePasswordManagerHelperClass 12/26/2011 Version 4.0.18.0
If I disable the add-on, I can access the website. Re-enabling the add-on causes the failure again. Any ideas here? I've uninstalled and reinstalled the Password Manager without any change in behavior. All of my other sites work fine. There is no logon entry at all for the website, so the code must be getting confused by the content. The same site works fine using the Chrome Browser!
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0
Solved!
Go to Solution.

I'm testing a beta version of Password Manager which has solved the issue that I was experiencing.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

Rpass - Secure, simple, and pluggable command-line password management

WARNING: this program requires a python version greater than or equal to 3.
EDIT: Fixed a bunch of bugs that made this unusable, please update!
EDIT: Added a default configuration file.
Hi there!
rpass is a command-line password manager that encrypts any and all credentials you would like to store using gpg's algorithms.
Gnome and Mac OS both have a universal credential solution, but to my knowledge there is no such generic linux application. Gnome's keyring code is long and personally, I don't trust it as much as the simple system I have in place in rpass - it is transparent and easy to understand, and any possible security holes would be blatantly visible.
rpass can be used directly from the commandline, typing your master password (gpg passphrase) in every time, but it really shines when gpg-agent and xclip are installed. gpg-agent saves your passphrase for an interval of time, so you only have to authenticate yourself occaisonally, and the powerful search capabilities of rpass (regex-enabled) allow simple and quick account selection.
Furthermore, with xclip installed passwords NEVER have to be printed onscreen - the first matching entry's password is automatically copied to the clipboard if a search is done with rpass. You can even run rpass from applications like 'dmenu', and although there will be no visible output, if you enter a search term after rpass you will have the password you wanted copied to your clipboard.
Finally, it can also be easily integrated in other applications -- I use it for my email (mutt) and any script I write that requires a password.
AUR Link: http://aur.archlinux.org/packages.php?ID=44788
More detailed documentation and explanation can be found at: https://github.com/rscare/rpass/blob/ma … E.asciidoc (scroll down)
or with
$ man rpass
after installation.
git repository: git://github.com/rscare/rpass.git
Please comment on the software and the documentation. Thank you very much for taking the time to try my software.
Last edited by RedScare (2010-12-27 07:04:44)

I'm very interested in this. However... on the initial run, pressing enter causes a crash:
$ rpass
Need to first create gpg key pair.
Choose a secure passphrase -- this is going to be your master password.
Rerun program after key creation.
WARNING: DO NOT pick a sign-only key type.
Press [ENTER] when ready.
Traceback (most recent call last):
File "/usr/bin/rpass_py_interface", line 80, in <module>
input("Press [ENTER] when ready.")
File "<string>", line 0
^
SyntaxError: unexpected EOF while parsing
I got around this by entering junk and I made my key. After rerunning rpass with the key generated:
$ rpass
Traceback (most recent call last):
File "/usr/bin/rpass_py_interface", line 84, in <module>
if not(IsRunning(gpg-agent)):
File "/usr/lib/python2.7/site-packages/rpass.py", line 24, in IsRunning
plist = [re.match(ppatt, p.strip()).groups()[0] for p in str(proc.communicate()[0], encoding=utf-8).split(n)[1:-1]]
TypeError: str() takes at most 1 argument (2 given)
Looks like rpass expects the gpg-agent to be running when it starts.
edit: rather, it expects the gpg-agent to be running with the key loaded. gpg-agent was already loaded thanks to keychain but without my newly created key known to it.
Last edited by falconindy (2010-12-26 03:42:28)

Password Manager and IE8 fails with CNN website

Whenever I go to www.cnn.com, Internet Explorer 8's browser consistently crashes. After looking into the problem, I discovered that Lenovo's Password Manager is causing the crashes. I have duplicated this issue on at least 10 Lenovo laptops. Everytime I exit from Lenovo's Password Manager, the issue resolves with IE8 and www.cnn.com.
The latest patch for Lenovo's Password Manager does not resolve this issue. Since IE8 is my preferred browser and www.cnn.com is one of the sites I use the most, I sure wish someone at Lenovo would address and fix this issue.
Mr. Clooney

Well, i have made some investigation, this Password Manager has add-on DLL's for IE 32bit and it has same 64bit DLL's on my disk aswell. But problrem is, these add-ons are registered only in 32bit IE, not in 64bit IE. I can see it in list of Add-ons, i have included attachment from IE32bit, there are 2 Lenovo add-ons. If i open same in IE64bit, its missing there. But i have no idea, how to register these add-ons manually, because these DLL's are on my disc in both versions (32 and 64 bit aswell), only registration in IE is missing.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64
Attachments:
IE32bit.jpg ‏128 KB

I have a password manager built into my fingerprint scanner. It worked on the older version of Firefox but it will not on this new version. It will not recognize log in pages and will not load information.

With the old version, all I had to do was go to the log in page to any of my email accounts or membership sites and scan my finger. It would fill in the fields and open my account. I like this new version of Firefox, but if I am not able to use that password manager then I will have to install the older version.

A 2008 black MacBook can run OS X Lion (OS X 10.7). However, if you want to use that Mac for apps that do not work with the new MacBook, I recommend you to leave it with Mac OS X 10.6.8, because OS X Lion removes compatibility with PowerPC apps.
Do not worry about the battery of the new MacBook Pro. You can replace it yourself or take it to an Apple Store or reseller, and the cost is similar. However, it's important to take the Mac to an Apple Store or reseller if your Mac's battery fails while the Mac is in warranty, because you will get the battery replaced for free.

My Password Manager icon has disapeared from my toolbar and no longer works. I have checked all settings with no luck in getting it to reappear.

The password manager has disappeared (icon and all) and no matter what I can't get it back & running. I have checked tools/security and all is set as should be.
== This happened ==
Every time Firefox opened
== Just discovered it this A.M.

There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8

Password Manager 4.6 and 4.7 causes CPU loop in tzres.dll

Similar Messages

Maybe you are looking for