Password Manager 4.70, build 2.0 doesn't load username / password into Internet Explorer 11 fields

Password Manager 4.70, build 2.0 will not load usernmane/password data into Internet Explorer 11 fields.
I thought maybe there was an Add-on issue, so I tried to check to see if an Add-on was available by
Open Internet Explorer
Click Tools
Select Manage Add-ons
Enable Lenovo Password Manager
But there is no Lenovo Password Manager Add-on available. Not sure if that is required, but I am guessing it is.
Any ideas on what I can do to make Password Manager work again? Version 4.0 worked fine most of the time. Version 4.7 hasn't worked at all.
System info: X230 Tablet, Windows 7 64 bit.

Hello
Password Manager4.7 is now not using IE plug-in or IE extensions.
There is a process name like "pwm_ie_helper_desktop.exe" which is to help to fill password manager for IE.
Did you see this process running when you opened IE?

Similar Messages

Manage passwords for Internet Explorer 11 on Windows 7 ??

How does a person find the mange passwords feature for Internet Explorer 11 on a Windows 7 box? I saw a few webpages on this topic for IE 10, and also for IE11 on Windows 8, but nothing for IE11 on Windows 7. When I go to IE 11 / Internet Options
/ Content / Auto Complete / Settings, there is no option to manage passwords. I went to Credentials Manager and it says there are no windows credentials, and it doesn't show any web or Internet Explorer credentials. Thanks

Thanks for the reply.
That link to the eightforums.com was not helpful. It states:
This tutorial will show you how to view ...
stored passwords by Internet Explorer 11 (IE11)
in your account in Windows 7,
Windows 8.1, and Windows RT 8.1.
View and Remove Stored Passwords for Sites in Credential Manager
1. Open the Control Panel (icons view), and click/tap on the Credential Manager icon.
2. Click/tap on Web Credentials, and expand a listed website (ex: www.eightforums.com) under "Web Passwords" that you want to view or remove ...
However it is apparent that the author of the article did not verify that this method is applicable to Windows 7.
When I click on the Credential Manager in Windows 7, there are no web credentials. I looked on all 3 of my Windows 7 computers (one Windows 7 Professional and two Home Premium boxes) and none of them had a web credentials section.
Any other ideas?

How to import passwords from Internet Explorer

Just installed the newest version of the Firefox (27) on WIndows 8.1 and would like to copy all the saved passwords (Autocomplete) from Internet Explorer 11. During the installation process it told me that the passwords will be copied over. They were not. How to do it by myself? Couldn't find anything on this support site with regards to this situation.
TIA

sorry ylzuev the link had to refer to this page -> https://support.mozilla.org/en-US/kb/import-bookmarks-data-another-browser. I think in the older versions, with this process you could select "passwords" in the list of elements to import from other browser.
Anyway, i think you should try the password exporter addon in firefox. Maybe it could work. I hope this can help you.
romsdu81

Firefox just won't open. I get the little timer that indicates that something is happening but nothing ever happens, no error message, firefox just doesn't open at all. Internet Explorer opens fine and firefox opened fine yesterday.

Firefox has always worked great, no problems. Today it just would not open at all. The hourglass showed up like it was going to open but nothing would happen. I then right clicked the icon and chose open and the same thing happened which was nothing. I get no error message at all.

One of your add-ons might be the culprit. Try running Firefox in [[Safe Mode]]. If that solves the problem, see [[Troubleshooting extensions and themes]] and possibly [[Troubleshooting plugins]]
~~~~~~~~~~~
If that does not solve the problem, [http://support.mozilla.com/en-US/kb/Managing+profiles#Creating_a_profile|create a new profile]. Then, Recover your data from the old profile. See http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Also see [[Firefox will not start]]

My macbook pro doesn't load facebook (although the internet works perfectly for other sites).

I've tried three different browsers (safari, firefox, chrome)
Here is a copy-paste of the ping to facebook
Ping has started…
ping: cannot resolve https://www.facebook.com: Unknown host
Does anyone have any idea what the problem could be? I've got no network software running in the background (other than dropbox), and I don't think I've set up a custom DNS... Not really sure how to check what it is. Does anybody have this problem?
P.S This is an on and off thing, sometimes facebook loads, sometimes it doesn't. Using computers connected to the same WiFi, I can freely access Facebook with no issues.

I had the same problem, and I just fixed it. See this thread-https://discussions.apple.com/thread/4612888?start=0&tstart=0
Let me know if this works!

On one site, Mozilla Firefox doesn't remember my Password any more, but Internet Explorer does.

Yesterday, I accessed the website for my bank. I entered the account #, then the password. I received an error message on the password, although I was almost sure the password was correct. I clicked "don't remember password" and was given the very password I had entered. I was really puzzled, but tried it again. It still didn't work. I then tried Internet Explorer at the advice of my bank rep. I created a new password on Internet Explorer, and was able to get right through to the website. Later, I tried Mozilla Firefox again with the original password. Again, the password was not accepted, but when I asked to access the correct password, I was given the new password I had entered on Internet Explorer. I'm very confused. Please help!

Hey Mez115, awesome to hear and thanks for reporting back! =)
- Ralph

Safari doesn't load a special page

hello,
I've got a problem with Safari. It doesn't load a special page. I always got a timeout. It's the admin page from my pixelpost site. Other Browsers like Firefox or Camino etc didn't work too, but when I start Parallels and load this page in Internet Explorer all browsers under Mac OS X works perfect after I load it once in windows.
Deleting cache or deinstalling Safari completly and reinstall with Pacifist didn't solve the problem. I couldn't explain it for me, so I hope that some of you know a solution.
I've got always the newest version of all Mac OS X Browsers
Thank you,
Marek

Hi again Marek,
Thanks for the info, perhaps some one will pipe in with more for you, I hope so.
I suggest you look at Parallels support, & contact them.
See if there is an update for it, that may help.
Other wish if I were you i would try uninstalling the Parallels software,
to see if that makes any difference to your accessabity to said site.
It is indicated that it may be the issues simce you say you can load the page if the application parallels is running, it's as if you mac is behaving like a windows box.
http://www.parallels.com/products/desktop/faq/
I don't know how else to help, good luck! & please keep us posted.
Eme'~{)

Firefox for android doesn't load all my passwords and corrupts bookmarks

Firefox for Android doesn't load all my passwords on my tablet (Lenovo).
Also, syncing corrupts my bookmarks on my desktop and laptop by inserting bookmarks which I have deleted days ago..
It syncs through all three devices and I know that it syncs because when I sync from my desktop, all three devices have the same time-stamp of when they synced.
It seems as though, if you have two usernames/passwords for the same login address, such as 2 Gmails - there is no dropdown which shows both emails/passwords from which to choose from.
This is all very frustrating, especially when I'm out and only have my tablet and I need to login somewhere when I'm with a client, and I can't login because Firefox/Android doesn't show my login info or the bookmark that I need is not there, because my bookmarks are corrupted after a sync.
I have lost clients because of this.

Hi modularbase.
I understand that there are some issues with sync between three devices. Specifically, there is an issue with corrupt bookmarks and passwords that are not stored.
Please make sure these settings are set:
* [[Control whether Firefox automatically fills in forms with your information]] * [[Usernames and passwords are not saved]]
* [[Using Master Password on Firefox for Android]]- the password manager addon for mobile devices may benefit in this situation.
However on mobile, specifically for Gmail signin, accounts.google.com can store a few mail accounts, however you would have to add an account by clicking on "Sign in with a different account". In Firefox, passwords are stored by website in the password manager.

Re: (forte-users) Session management for page builder(fwd)

Jaco,
Hope this helps,
John
John Soper, Information Systems Development, ITS, The University of Melbourne
email: j.soperits.unimelb.edu.au >>>> Tel: 9344 5612---------- Forwarded message ----------
Date: Mon, 10 Jan 2000 16:34:31 +1100
From: Lyle Winton <L.Wintonits.unimelb.edu.au>
To: John Soper <j.soperits.unimelb.edu.au>
Subject: Re: (forte-users) Session management for page builder (fwd)
Why not construct an intermediate page after the
login page that has SESSION_UNSPECIFIED and
a refresh META tag. The page can then refresh
to either the login failed or login succeeded pages
depending on how the login went! Looks like...
1) Login page (SESSION_UNSPECIFIED)
2A) Refresh page (SESSION_UNSPECIFIED)
< HTML >
< HEAD >
< META http-equiv="refresh"
content="0;URL=<a href=
"http://www.blah.com/forte.cgi?PageName=3">http://www.blah.com/forte.cgi?PageName=3</a>" >
< /HEAD >
< BODY >
Login succeeded. Please wait...
< /BODY >
< /HTML >
2B) Refresh page (SESSION_UNSPECIFIED)
< HTML >
< BODY >
Login failed.
< /BODY >
< /HTML >
3) We're finally in. (SESSION_REQUIRED)
I'm not sure if this works on internet exploder.
Lyle.
John Soper wrote:
Lyle,
(Post from forte mailing group)
Does this make sense to you?
John
John Soper, Information Systems Development, ITS, The University of Melbourne
email: j.soperits.unimelb.edu.au >>>> Tel: 9344 5612---------- Forwarded message ----------
Date: Thu, 30 Dec 1999 07:54:24 +0200
From: "Jaco Erasmus (home)" <jacoerasmweb.co.za>
To: kamranaminyahoo.com
Subject: (forte-users) Session management for page builder
Hi everybody,
We have a lot of legacy code making use of the page builder service to
produce web pages. These pages were originally written without session
management. I'm now busy adding session management to them, but there is
one problem with this approach and I will appreciate if someone can shed
some light on it. Here it is:
Page one is submitted.
Some validation (authentication) takes place and depending on the outcome,
either page 2A (SESSION_REQUIRED) or 2B (error page with
SESSION_UNSPECIFIED) must be displayed. In order to implement this, I
needed a place to make a decision. The way I've done it, is to pass a
'virtual page' (SESSION_UNSPECIFIED) to the page builder service. The
validation is done here and request.PageName is then replaced with the
PageName of pages 2A or 2B. The HandleRequest() method is then called
again. The problem is that the ValidateSession() method does not get
invoked again, thus allowing 2A through without a session. How do I make
sure that the ValidateSession() method get invoked again?
The approach making use of templates look to me as if it has all the means
to do this (redirect tag), but I don't want to rewrite everything if I
don't have to. Is there a way that a pagebuilder page can be specified by
the redirect tag? This will definitely help, but so far I've only managed
to call templates from the redirect tag.
Is the template approach better suited for session management? It is
definetely better documented...
Regards.
Jaco
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

Hi,
i hope this helps
http://help.sap.com/saphelp_nw70/helpdata/EN/7e/aa610cc1dd8f4388b1df02fc362f0f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c250754ba111d189750000e8322d00/frameset.htm
regards,
Anil.

Configuration Management/Change Control/Build Management contract help needed in Missouri*** *** **

Configuration Management/Change Control/Build Management
Needs to have instituted a config management process before.
web development history
Tools/Skills:
CVS
ANT
Unit Testing
Unix
BEA Weblogic
John D Allen
CEO/President.
Leveridge Systems INC.
v1 (480) 899 9341
mailto:[email protected]
http://www.leveridgesystems.com

Could you post an example of your problem ?
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Records management and Document builder in SRM with PS

Hi,
We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS.
Thank you
Sreedhar Vetcha

Hi Chris,
I am having the same issue as Patrizia while using BSP, SRM_DEMO_RECORD & SRM_DEMO_BSPEXT, to search/display, maybe update later the records,documents,and notes that are stored in RM. I have read all the documentation described in your messages as to how to customize web display BSP application using these 2 BSPs, srm_demo_record & srm_demo_bspext.
I tested SRM_DEMO_RECORD with <srm:element> tag embbeded in the layout page, but it lists only the records that associated to a given RMS_ID and SPS_ID, and I wasn't able to get it to display the associated document and notes for a selected RM record. The comments on the iview page in BSP suggest the custom code is needed for initial request from browser and callback event to return the notification for the activities occurred in RM. As you suggested to Patrizia, I wonder if you've some sample code that i could use to make these BSPs work before additional enhancements is needed later. As far as other prerequisit settings of http access and assigning search interface class to the correct service provider element type using GENSP_QUERY_EXT connection parameter are all properly set with my customer. So i'd feel really grateful if you could forward me the example codes for these BSPS.
Regards,
Amy Lee
SAP NetWeaver Consultant

Flash builder doesn't load on flash player 11,only version 13

Hi everyone
I developed a swf player on flex builder 4.5, over flex sdk 4.6, using the minimum version required by the sdk(11.1)
But for some reason, the script code only works fine on flash player 13.
What am i missing?
On the flash player 11 this is written by swfobject.js
<object id="CorePlayer" name="CorePlayer" width="0" height="0" type="application/x-shockwave-flash" data="assets/CorePlayer.swf"><param name="allowscriptaccess" value="*"><param name="allowfullscreen" value="true"><param name="wmode" value="transparent"><param name="flashvars" value="endpoint=&hash="></object>
And this is the javascript code using swfobject.js way:
var swfVersionStr = "11.1.0";
                var xiSwfUrlStr = "playerProductInstall.swf";
                var flashvars = {
                    endpoint: "",
                    hash: ""
                var params = {
                    allowscriptaccess: "*",
                    allowfullscreen: true,
                    wmode: 'transparent'
                var attributes = {
                    id: "CorePlayer",
                    name: "CorePlayer"
                swfobject.embedSWF("assets/CorePlayer.swf", "flashContent", "0%", "0%", swfVersionStr, xiSwfUrlStr, flashvars, params, attributes);
                swfobject.createCSS("#flashContent");
But doesn't load corePlayer.swf on the networks resources from chrome.
Any ideia about this issue please thanks for your attention!!
Also some others tecnichals settings

From: Bill Boggs
Sent: 01/04/2014 1:13 PM
To: [email protected]
Subject: Re: Flash player doesn't load on PBS sites
Hey Mike,
Those folders do exist. I did a clean install, checked to make sure those folders were there, but still get the same results with video on PBS sites. Seems to work everywhere else though. When I right click on the player space, besides the flash player settings and “about” links, there is also an “about JW player” link, if that means anything.
Bill

Analytic Workspace Manager vs Warehouse Builder

When is it best to use Analytic Workspace Manager over Warehouse Builder to create the OLAP? Please advise.

We are using OWB to create OLAP because you have your metadata properly defined in the design repository of OWB from where you can deploy to different databases and schemas. We are also using OWB to create tables and other relational objects instead of using SQL Developer or Toad to do so.
Nevertheless there are some restrictions when using OWB: You cannot create programs with OWB (e.g. for limiting access to certain objects), not all aggregation operators are supported (e.g. the weighted aggregation operators like WSUM are not supported by OWB), you cannot create models, ...
If you come to these restrictions you could write "after-deployment scripts", i.e. you deploy your dimensions and cubes from OWB and let the scripts do what you could not model with OWB.
Hope this helps!

What to do if you use a segmented control in interface builder and it doesn't work ?

What to do if you use a segmented control in interface builder and it doesn't work ?

The first thing to do would probably be to update your profile and/or signature so people will know what OS, language, and development system you are using, then perhaps include some additional information such as what "it doesn't work" means, and possibly a few other things like some error logs, what you have done so far, maybe a code snippet or two, etc.

SQL getConnection doesn't pass Username and Password

I am trying to connect to a secure Microsoft Access database.
I connect to the database but the username stays as Admin with an empty password. And unfortunitly Admin doesn't have the permissions that I need.
This is part of my code:
          Properties DBCreds = new Properties();
          // Put the Username and Password into the properties
          DBCreds.setProperty("user", STRING_USERNAME);
          DBCreds.setProperty("password", STRING_PASSWORD);
          // Get the database driver
          try
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          catch (ClassNotFoundException e)
               e.printStackTrace();
               System.out.println("Class not found for the JDBC to ODBC Driver.");
               System.exit(1);
          // Connect to the databases
          System.out.println("Starting Connections to the Databases");
          System.out.println("Database: General Tables (" + DATABASE_GT + ")");
          try
               conn_gt = db.getConnection(STRING_DBCONNECT + DATABASE_GT,DBCreds);
               sql_gt = conn_gt.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_UPDATABLE);
          catch (SQLException e)
               e.printStackTrace();
               System.out.println("\nERROR: Failed Connection to General Tables");
          }Yes I am using a Properties varible to pass the username and password but I have also tried using the getConnection(URL,USERNAME,PASSWORD) and it didn't work.
Any help would be greatly appreciated.

Hard code the connection string and the user,
password using getConnection(String url, String user,
String password). Still is admin
Make sure that the meta data call is right after the
connection call.It is.
Once you have done that then run again and see what
the meta data returns.Still Admin
If it still returns admin then I would suppose that
the meta data is going to return that regardless of
what you do. (I would suspect that this might be the
case.)Maybe but the thing is it is only using the Admin security settings while I need to use the USERNAME security settings
If it returns the correct name then I would suppose
that either you are setting up the properties wrong
or the getConnection(String url, Properties info)
doesn't work.Ok here is my problem revised... Admin doesn�t have read properties on the Zonas table, but the username that I have does. The part of teh code that is failing is:
          System.out.println("Opening Zonas table");
          try
               missionaries = sql_gt.executeQuery("SELECT * FROM Zonas");
          catch (SQLException e)
               e.printStackTrace();
               System.out.println("FAILED!!\n" + STRING_DBCONNECT + DATABASE_GT);
          }The output is:
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Record(s) cannot be read; no read permission on 'Zonas'.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6958)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3111)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
at sun.jdbc.odbc.JdbcOdbcStatement.executeQuery(JdbcOdbcStatement.java:253)
at Map.main(Map.java:77)
FAILED!!
jdbc:odbc:Driver={MicroSoft Access Driver (*.mdb)};DBQ=p:\general tables.mdb

Password Manager 4.70, build 2.0 doesn't load username / password into Internet Explorer 11 fields

Similar Messages

Maybe you are looking for