Password not being accepted during setup of airport extreme utility?

I am tyring to setup my airport base station. however during the utility setup it asks for a pwd and i am unable to move forward. anyone had this issue before?
thanks,
sunny

I am tyring to setup my airport base station. however during the utility setup it asks for a pwd and i am unable to move forward. anyone had this issue before?
thanks,
sunny

Similar Messages

  • Name/Password not being accepted when trying to install software

    New iMac user here. When trying to install new software I get a message "Type your password to allow install of _________ to make changes." I am entering the correct password for my user name, even changed it to make sure. Not able to get through this part of the installation process. Any information is appreciated!

    NurseCarol,
    Double check that the caps lock isn't on, if it isn't then try restarting in Safe Mode, this will clear some caches. If that doesn't work your new iMac has 90 days of AppleCare support. You can call them M-Sat during business hours, the phone number is in your owners manual.

  • Known freshly set firmware password, not being accepted on new MBP with retina. Locked out of bootmenu.

    Hello,
    I have a MBP 15" with retina display and 16GB of RAM.
    I bought it end August/early september and it has worked great so far, really happy with it.
    After encountering some people that have had theirs stolen, i figured it was a good idea to enter a firmware password so that people can't use external drives to boot up from.
    I just rebooted holding the alt key, clicked utilities -> firmware password and I set myself a password. It is one word, starts with a capital letter and has 2 numbers incorporated in it.
    I then immediately rebooted and held alt again to test it. I enter the exact same password (100% sure) and for some reason it just deletes the entered password when i click enter/the ok arrow and it does nothing.......
    Please tell me this is a known MAC problem, I am 100% sure i'm not going mad, but this kind of problem is annoying me! I have a dualboot windows 7 partition that I would like to continue to use without working virtually from within MAC OS X.
    Thanks, any ideas appreciated!
    Best regards,
    Nick

    Sigh i found it ....
    Apple you could have mentioned that you enter it as QWERTY instead of AZERTY -_- My letters were coincidently all the same, however the numbers need shift pressed in the latter which they don't in the former.
    Oh well, Back to enjoying my wonderful machine now
    Bye and sorry for the unnecessary read! Hope it helps some with the same problem.
    Greets

  • [SOLVED] new user password not being accepted

    I just installed, and I created my normal non-root user and created a password for it using passwd slackcub.  When I tried to log into it later, I kept getting a message saying login incorrect.  I tried changing the password several time running passwd slackcub, but to no help.  The thing I find most interesting is if I log in as root, run su - slackcub, then passwd, when it prompts me for my current password, it accepts as correct what I had just set it as previously. What could be causing my install to refuse login to a normal user?
    David
    Last edited by slackcub (2013-07-26 15:36:40)

    How exactly are you setting that user's shell? Check /etc/shells to see what path to the shell should be:
    $ cat /etc/shells
    # /etc/shells
    /bin/sh
    /bin/bash
    # End of file
    /usr/bin/zsh
    As you can see it's /bin/bash but /usr/bin/zsh.
    https://mailman.archlinux.org/pipermail … 33740.html

  • WEP Password not being accepted

    As someone is hopping onto my network I set up a WEP Password on my wireless router.
    My macbookpro running 10.5.3 joins the network with no problem when asked for the passport, as does my ipod touch but my iMac with 10.4.11 just comes back with "there was an error connecting to the network".
    Any ideas?

    Well I've found the answer myself after stumbling around so will leave what I found here for posterity and in case anyone else finds the same problem.
    On all my devices it just asked for the WEP Password which I entered (a five letter word) and it was accepted.
    On the imac that didn't work, until I tried the WEP 40/128-bit ASCII option - which I imagined couldn't work, yet it DID!
    What I saw as the the password was converted into hex - PLUS it included a $ at the start, something that I never saw in any of the various manuals or literature that came with any connected item.
    So now I'm only left with whatever issues arrive when I get a wireless connection for my xBox 360…

  • Correct login password not being accepted

    my son is using my old macbook pro 13-inch and he went to login using the correct security info but keeps getting denied. and clicking the question mark only leads to the computer recommending the very same password that he is using with no other options to request a change password option. the computer may still be running mountain lion, though possibly mavericks. definitely not yosemite. any help would be appreciated as i'm trying to solve this problem with him long distance. thanks!

    Five way to reset a lost administrator Password:
    http://tidbits.com/article/14437

  • TS1702 on my iPad when I try to login to Directv my password is not being accepted

    Please Help!  When I try to login on Directv app my password is not being accepted, how can I correct this?

    there are a few things you can try.
    Go to settings>general>reset>reset all settings. if that does not help then do a back up and restore of the iPad these articals will help you with that.
    Back Up: http://support.apple.com/kb/ht1766
    Restore: http://support.apple.com/kb/ht1414

  • Client Commands are Currently Not Being Accepted  due to restructuring

    Hello,
    We are running Essbase and Planning 9.3.1. Occasionally, the users get the above error, "Client Commands are Currently Not Being Accepted", because Essbase spontaneously starts restructuring itself. We schedule a restructure in the evening. Is there a way to prevent this spontaneous restructuring from occurring during business hours?
    Thank you,

    Thank you Glenn,
    The users say they did not change the outline or refresh the database. The log file says sysadmin gave the command, as I have copied here.
    Received Command [Restructure] from user [sysadmin]
    If the users did something, I would expect the command to come from them.
    The essbase.cfg does not have the work sync or security in it. Can you tell me more on how to determine if this is our problem?

  • My Apple ID is not being accepted on my Mac

    My Apple ID is not being accepted on my Mac but is okay on both my other Apple devices.

    Well, what exactly happens and where are you entering it?

  • Is there a way to reset my 4 digit pin? my old one is not being accepted.

    Is there a way to reset my 4 digit pin? my old one is not being accepted.

    The only way to remove a passcode is to restore the device.
    Read:
    Forgot Passcode or Unable to Restore
    (Note that I am a representative of the organization of the above link, which is not endorsed by Apple).

  • I need help with my serial number.  I downloaded soundbooth cs3 to restore my downloaded puchase, but my serial number is not being accepted.  I have 16 more days to resolve this.

    I need help with my serial number.  I downloaded soundbooth cs3 to restore my downloaded purchase, but my serial number is not being accepted.  I have 16 more days to resolve this.  I don't need tech support, I just need the software I purchased to work for me.  That's not to much to ask, is it?  Can anyone from adobe help me please?
    Chris

    Error "The serial number is not valid for this product" | Creative Suite

  • Trying to install LR4 on a second computer but my serial number is not being accepted.

    Trying to install LR4 on a second computer but my serial number is not being accepted. What to do?

    there's nothing online about which i know.  but you may be able to get that info from adobe support, http://helpx.adobe.com/x-productkb/global/service1.html

  • HT3275 My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help

    My Time Capsule keeps saying "backup failed" due to the network password not being correct. I have not changed my password and every day I have to type the same one in and then it works. But then the same thing happens the next day. Can anyone help? This only started doing this about 2 weeks ago.

    Hello,
    Mac OS X 10.4 Help, I forgot a password in my Keychain
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1960.html
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544
    Open Keychain Access in Utilities, use Keychain First Aid under the Menu item, then either check the Password under that item, change it, or delete it and start over.

  • Some Purchase Requistions are not being replanned during SNP Heuristics

    Hi All,
    Has anyone experienced any issue with purchase requisitions not being replanned during the SNP heuristics run (background or interactive). I have a product location combination and about half of the PRs are not being replanned and these are not fixed/firmed.  When I say replannned I mean that they are not generating a new Purchase req. #. I have no idea why at this point. Any suggestions would be appreciated.
    Regards,
    Rumi

    Rumi,
    we faced a ismilar issue and figured out that the issue was due to the change in MoT for the Preq. The earlier Preqs were created with MoT 'Ship' which was then changed to 'Plane'. When we ran the heuristic the Preqs created with Ship were not recreated. This is a standard SAP APO behaviour.
    I am sure that after deleting these preqs all subsequent runs would be working fine for you.
    Nxet time if it happens consider what I have said, it could be a possible reason.
    Abhi

  • Anti spam codes for website forms are not being accepted on my imac or iPad

    anti spam codes for website forms are not being accepted on my imac or iPad

    In Safari go to preferences click on privacy and on Block Cookies tick the never box

Maybe you are looking for