Password not set after PSS for user

Hi,
Edited by: Chetan on May 24, 2011 2:36 AM

Hi
Regarding the first question: You receive the "Password set", but does your test-user have a role assigned in UME through IdM? If yes, I would check the system log to see if any errors are written here.
If no: Try assigning a role to the user and then try resetting the password.
Have you checked in UME under security concept if it is allowed to change the password (it is in some check box under security concept under Configuration.
Best of luck with editing passwords in AD. now THAT is a real challenge
Kind regards
Heidi Kronvold

Similar Messages

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Password not set.

hi all
i hope this is the correct area to post.
i am doing my CCNA and want to overcome a small problem.
when trying to 'telnet' into my 2610 router i get the
'Password not Set' message and then disconnected.
i did see a mention of this among the pages and pages of cisco support area.
the ping is successful, and i do get the banner MOTD shown as i telnet in.
so suggestions please, and have i posted enough info?
regards
c

Hi
You can get onto the router via console port and configure the password for the same under the line vty 0 4 which will set the telnet password for the router.
line vty 0 4
password cisco
Also do check up whether you have configured either enable password or secret to get the privilege access to configure the router..
regds

[svn:osmf:] 14823: Fix bug where canPause was not set to false for live streams.

Revision: 14823
Revision: 14823
Author:   [email protected]
Date:     2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
Log Message:
Fix bug where canPause was not set to false for live streams.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.as

Thanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
Thanks to all who looked at and thought about this.
Walter

"CJS-30199 The CTC classes were not found after waiting for 900 seconds."

Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE      [iaxxejsexp.cpp:188]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR      2007-05-10 20:19:48
           CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/

Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
     Visual Admin => Cluster => Server => Services => Deploy
     Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny

User password not accepted after migration

Source: iMac Lion OSX.7.4 Destination iMac OSX6.8
Problem: user password is not accepted after migration
What I did: Tried to migrate over the LAN, but in the migration assistant the other Mac was mutually never recognized. (Did migrations several times successfully in our LAN before). Last time the LIon Mac was the destination, who is now the source.
I backupped then the user with Time machine on the Lion and installed it with the migration assistant on the Snow Leopard system. As as the password was not accepted, I repeated the backup/migration process once. No help
I reset in System Prefs/User accounts the password of that user. But cannot login either
First time, that a migration process fails for me.
Any help is appreciated
Thanks
Urs

The target computer itself has admin accounts thats not the problem, I can access it. The issue is that the migrated additional user account is not accessible with its password.
I have found here an istruction how to reset a password in single user mode.
http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
But that does not help either.The answer after the dscl -passwd command is that I do not have access (or similar, I don't remember)
My guess is that backward migration (Lion to Snow) causes the problem. May be I need to create the user freshly and to copy his documents manually

PI 7.1 can not deploy! ask for user SID adm and password

hi all:
    PI 7.1, NWDS 7.1
    I create a ejb project amd import a WSDL and generate java bean skeleton. after implementation, I choose the EAR project and right click and choose run RUN AS-->Run on server, then choose the server, add project and finish
then a popup window shows and tell me "Please enter the credentials of the SAP administrator <SID>adm", I use J2ee_admin but error occur:
Error while disabling debugging of the server
Error while disabling debugging of the server
Incorrect login information provided
I search the SDN and find no useful link. how to config <SID>adm ?
how to deploy my java proxy? i think this process is so complex!
thank you!

hi Prateek：
    thanks for your information.
   only ask for user and password, no other pop up window.
   i am confused is there any configuration missing?

Passwords not working after restart

After the server is restarted users can't login until the password is reset. I have a few generic accounts that are not affected. All passwords are Open Directory. Was going to try Crypt password to see if the issue persists. I have turned off the ability to change passwords on all accounts. The solution I had been given was to change the admin passwords. I did that. It still doesn't matter. I could change an account password. Login. Restart the server and not be able to login till the password has been reset in Workgroup manager. The server is 10.4.6 and this seems to have been happening since 10.4.2.
iMacG4 Mac OS X (10.4.5)

It is possible for the Password Server's SASL realm to change across restarts if the hostname has never been set explicitly. The default realm, if none is set, is hostname. However, depending on the order things get launched at boot, hostname may return the Bonjour name instead of the DNS name. For SASL purposes, it does not matter what the realm name is, but it must be the same all the time. It's the uncertainty that causes the problem. You can set the value for the SASL realm with the "mkpassdb -setrealm" command. After setting the realm, type, "killall PasswordService" to restart the daemon. The two SASL realm values to try are 1. whatever is returned by 'hostname' and 2. "localhost" realm.
If niether of those realms work, then:
1. set hostname correctly (mycomputer.example.com).
2. set the SASL realm to the same thing
3. restart PasswordService
4. reset the user passwords
After the realm is set, you should not have this problem again.

Unable to set email address for user MySite in SharePoint2013

Hi,
I've a SharePoint Ent farm with a MySite Host Site Collection created. Under that, I've got some users having their own MySites.
Now, the problem is, I'm unable to get the link for editing the user's email address after logging in to the MySite under the credentials of the particular user.
Can anybody please suggest. Is this field at all editable?
Thanks,
Arnab

Hi John,
Elaborating...
I've created a MySite Host Site Collection programmatically, say, http://test.mysitehost.local/.
Under the same I'm creating user mysites (through SharePoint2013 Object model), say, http://test.mysitehost.local/personal/user1. (for my case "personal" is the managed path). While creating the user mysites, I'm not passing any value for the email
address of the user.
Now, my question is, can I set the email address of the user from MS native portal or through powershell?
Please note, I'm using SharePoint2013 Server.
Thanks in advance,
Arnab

Objects not created after the AT USER-COMMAND

Hi experts, gud evening. I'm new to ooabap. in my prog. after the at user-command the objects are not getting created. so i've created even before that. even then i couldn't get that created. so pls help me where the prob. is
Prog :
REPORT yrj_my_oops.
      CLASS cl_vbak DEFINITION
CLASS cl_vbak DEFINITION.
PUBLIC SECTION.
    METHODS : load_data IMPORTING value(im_kunnr) TYPE vbak-kunnr,
              display_head,
              write_data.
PROTECTED SECTION.
PRIVATE SECTION.
    DATA : it_vbak TYPE TABLE OF vbak,
           wa_vbak TYPE vbak.
ENDCLASS.                    "cl_vbak DEFINITION
DATA : w_vbeln TYPE vbak-vbeln.
      CLASS cl_vbap DEFINITION
CLASS cl_vbap DEFINITION.
PUBLIC SECTION.
    METHODS : load_data IMPORTING value(im_vbeln) TYPE vbak-vbeln,
              write_data.
PROTECTED SECTION.
PRIVATE SECTION.
    DATA : it_vbap TYPE TABLE OF vbap,
           wa_vbap TYPE vbap.
ENDCLASS.                    "cl_vbap DEFINITION
      CLASS cl_vbap IMPLEMENTATION
CLASS cl_vbap IMPLEMENTATION.
METHOD load_data.
    SELECT * FROM vbap INTO TABLE it_vbap WHERE vbeln = w_vbeln.
ENDMETHOD.                    "load_data
METHOD write_data.
    LOOP AT it_vbap INTO wa_vbap.
      WRITE : /5 wa_vbap-posnr,
              20 wa_vbap-matnr,
              35 wa_vbap-arktx,
              70 wa_vbap-netpr.
    ENDLOOP.
ENDMETHOD.                    "write_data
ENDCLASS.                    "cl_vbap IMPLEMENTATION
      CLASS cl_vbak IMPLEMENTATION
CLASS cl_vbak IMPLEMENTATION.
METHOD load_data.
    SELECT * FROM vbak INTO TABLE it_vbak WHERE kunnr EQ im_kunnr.
ENDMETHOD.                    "load_data
METHOD display_head.
    WRITE : /5 'Order No.',
            15 'Order Date',
            30 'Net Value'.
ENDMETHOD.                    "display_head
METHOD write_data.
    LOOP AT it_vbak INTO wa_vbak.
      WRITE : /5 wa_vbak-vbeln,
              15 wa_vbak-audat,
              30 wa_vbak-netwr.
    ENDLOOP.
ENDMETHOD.                    "write_data
ENDCLASS.                    "cl_vbak IMPLEMENTATION
PARAMETERS : p_kunnr TYPE vbak-kunnr.
DATA   : o_vbak TYPE REF TO cl_vbak,
         o_vbap TYPE REF TO cl_vbap.
START-OF-SELECTION.
SET PF-STATUS : 'YRJ_MY_OOPS'.
CREATE OBJECT o_vbak.
CREATE OBJECT o_vbap.
CALL METHOD o_vbak->load_data
    EXPORTING
      im_kunnr = p_kunnr.
CALL METHOD o_vbak->display_head.
CALL METHOD o_vbak->write_data.
AT USER-COMMAND.
w_vbeln = sy-lisel+4(10).
CASE sy-ucomm.
    WHEN 'BACK' or 'EXIT'.
      LEAVE LIST-PROCESSING.
    WHEN 'ITEM'.
     CREATE OBJECT o_vbap.
      CALL METHOD o_vbap->load_data
        EXPORTING
          im_vbeln = w_vbeln.
      CALL METHOD o_vbap->write_data.
     WHEN OTHERS.
ENDCASE.

Hi,
I dont see any problem with you code. I ran your code in my system and worked fine. Except for one thing that is you need to do a conversion exit on the w_vbeln before selecting data from VBAP in method load data. This is because when you ouput the data, the VBELN is converted to external format and thus needs to be converted to internal format if you want to do further selects based on it.
CLASS cl_vbap IMPLEMENTATION.
METHOD load_data.
" Add this , so it converts the VBELN to internal format.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        input = w_vbeln
      IMPORTING
        output = w_vbeln.
    SELECT * FROM vbap INTO TABLE it_vbap WHERE vbeln = w_vbeln.
ENDMETHOD. "load_data
METHOD write_data.
    LOOP AT it_vbap INTO wa_vbap.
      WRITE : /5 wa_vbap-posnr,
      20 wa_vbap-matnr,
      35 wa_vbap-arktx,
      70 wa_vbap-netpr.
    ENDLOOP.
ENDMETHOD. "write_data
regards,
Advait

Changed Password Not working after restart[What to do]

Recently I've changed my password, but it's not working after restart.
I've noticed that, input option is not taking one of the password characters which is '!'.
I've the recovery disks, system accepts my fingerprint too.
Any help will be highly appreciated.
Thanks.

Hello,
Let me explain you what happened.
One evening I was trying to open my ThinkPad. Usually it asks for
fingerprint or password(I'm not sure which password, power-on/hard
drive). But this time I failed using my finger. and I tried with
password, but could not recall.
Then I restart and again tried with finger, this time it worked. Now
after login in Windows XP I removed all old fingerprints and create
few new. When I create new, it was asking for password, or new
password to replace. As I could not recall the pass, I've given new
password to replace.
Now to check I gave a restart. Fingerprint accepted for Power-on but
also asking for password again(Now I can see it's for Hard Drive). I
tried with new password. But it's not working. And even not taking one
character ('!') of the password.
Now can you tell me, if I did change password for Hard Drive in the
last description. Or is that possible to change it from Windows XP
environment. Else it's possible that the Hard Drive password remain as
it was which has been set from ThinkVantage before OS boot. Let me
know if you've any query which I've missed.
Thanks.

Context Menu not displayed in KM for users except Administrator

Hi Experts
Can you please suggest where the permission should be given in order to make context menu visible for users who are not super-administrators but are content admin?
We are facing issue with context menu not shown at all to the users.
Please suggest.
Regards
Shaily

Hi Shaily,
You may need to look into the permissions on your Layout set and Resource renderer in use.
This thread will help you navigate and do the required changes.
http://scn.sap.com/thread/99088
Thanks,
Biroj

Application set as 'Install for User' but deployed to device collection - what happens ?

Hi All,
If i package an application and set it to 'install for User' - if i then deploy that application to a device collection as required will it install for every user each time they log onto the computer.. ???
Cheers.

Install for User determines the security context in which it will install. If the logged on user is not an admin, the install will likely fail. And yes, technically the app will be available for all users who log in (to be installed) however
if you have your detection method configured properly the app will be installed only once as the detection will determine its already there.
Someone please correct me if I am wrong. ;-)

ICal server set auto schedule for users

Does anyone know how or if it's possible to set the auto accept state for a user?
Using calendarservermanageprincipals you can do it for locations for example and you can --get-auto-schedule for a user, but when you try to --set-auto-schedule for a user it says it's not allowed. Anyone know of a workaround or if it's possible?
--sysdev

Nevermind, figured it out. you can manually edit the database these values are set in. /CalendarServer/Data/resourceinfo.sqlite

Signed up on furefox desktop 2/2. No problem. Today password not accepted. Asked for help 3 hrs ago and never got email and nit in spam

Was sucesssful signing up and using firefox on desktop yesterday. Today user name and or password not accepted. Can't get emails-nothing. Asked for help with password and never got email. This was 3 hrs ago and not in spam folder

Password for what? Signing up for what?
Firefox doesn't need a password for a person to be able to use it.
Firefox shouldn't affect your ability to get email - Firefox doesn't do email, but it will allow you to access your web-mail service.

Password not set after PSS for user

Similar Messages

Maybe you are looking for