Password not working.

I have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password is invalid....and YES Im sure its the right password I entered. I went to http://192.168.1.1/wireless.htm and did all the necessary instructions, and still, it doesn't work. I can change my network name and it works. As long as I leave it unprotected, everything works fine, but when I add the password, it tells me its invalid. I even used 123456 so as to make sure it was the right one. Anyone??

Just a couple of random thoughts...WPA2 Personal is about the best security mode. You have to make sure that both the router and the computer have the security mode set the same. A WPA2 passphrase has to be at least 8 characters to be valid.
Again, as posters above have said, your wireless security mode and password are first set in the router via the web GUI. Then ou log onto the wireless network with your computer, and you have to make sure that it has the same security mode set, and use the same password as you set in the router.
If that doesn't work, then there's other problems here.

Similar Messages

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Why is my apple ID password not working on ipad2 after updating to iOS6?

Why is my apple ID password not working after upgrading to iOS6?

Who knows?
Settings>iTunes and App Stores>Tap your ID and sign out. Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Go back to the settings and sign back in again and see of it works now.
If it doesn't work, post back with some information that might help us help you. Describe what you are doing in some detail and it might let us better understand why this is happening.

TS3274 password not working. says apple ID wrong

apple ID password not working has before?

Hi jic811,
Thanks for visiting Apple Support Communities.
You can confirm your Apple ID and reset the password by following the steps at this link:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Cheers,
Jeremy

Wifi password not working on MacBook Pro

Wifi password not working
I got a MacBook Pro today. The previous owner had Apple wipe it clean for the new owner, me. When I first tried putting my wifi password in, I wasn't remembering exactly what it was, so I tried many different possibilities. Since then, I found my password in my office. I put it in, when it asked for it. But, it's not taking it. It just says searching for networks. And, this is after I identified the correct network. So, I am wondering if perhaps after a number of "tries" does it not accept ANY further attempts ? You know like Banking passwords....you get locked out. I'm wondering if I'm locked out?

No, not like a bank timeout.
Open keychain in your Utilities Folder and look for old router password, or delete wrong passwords.
You can always reset your router password to something new that you can remember.

Password not working, reset and not working again ...

Hi I have had nothing but problems today I think my account has been hacked. Couldn't log in to Skype on PC or iPad kept saying my password was incorrect, though same password I have always had. I changed my password by having Skype send me a new one to my email. I activated it and created new password and all good. IN the middle of a call it shut down suddenly and when I tried to log on again, it said it didn't recognise the password I only just created that had worked already. Kept trying and still nothing. So I went to create a THIRD password and now skype is saying my email address doesn't exist. I have had this account for years and they only just sent me a new password to that email address so it certainly does exist. Left for a few hours and now tried again and it says i have tried too many times today. I have actually tried to create new account to be able to use skype. Can anyone explain what is happening? I am currently scanning for viruses but i really want to be able to use my old account with all my contacts on it rather than start from scratch! My mother in law is having the same problem with her account so I wonder if it's a virus?? At the same time I have started receiving a bunch of emails from 'skype' in Chinese so I assume this is connected somehow? Please any ideas on how to fix this?!

Have received numerous of the following: also my account isn't working, passwords not working, can't access anything. I think it's been hacked. It is now not even recognising my email address. Please advise how to fix. Please note I did not follow any links in any of these emails that have been sent to me.
本邮件自动发送，请勿回复。
您好，sarahodonnell79：Skype管理器分配的Skype点数
管理员Brian Leahy（来自Skype管理器Recognize polite beauty）为您分配了一些Skype点数。您可以立即开始使用该功能。
以下是为您分配的内容：
Skype点数：EUR 8.00
您的Skype用户名为sarahodonnell79 日期：2012-10-3
查看您的Skype帐户
Skype点数的用途：
拨打世界各地的座机和手机通过Skype WiFi使用WiFi热点激活Skype To Go号码启用呼叫转移
如果需要协助或想要申请其它Skype功能，请联系您的管理员，他们的详细资料位于成员列表。或者，如果需要任何其它帮助，请查看Skype的支持页面。
我们希望您尽情享受使用Skype点数的乐趣。
谢谢！ Skype同仁

TS1702 cant connect to wi-fi, my password not working

cant connect to wi-fi, my password not working...grrrrrrrrrrr!!!!!!!!!!!!!!!!!!!!!!
apple iphone 4g

I think you need to give more information to get any help.
What iOS level?
What make, model, and version WiFi router are you using?
What router firmware level?
What type of security do you have configured? WEP, WPA, WPA2, etc.

HT1430 Yahoo mail password not working on iPhone 5

Yahoo mail password not working on new iPhone 5

Hello tifftann,
I'm sorry, I'm a bit unclear what exactly you mean when you say that your Yahoo account "stop[ed] working". If you are having issues sending or receiving from the Yahoo mail account you have configured on your iPhone after a recent iOS update, you may find the troubleshooting steps outlined in the following article helpful:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Sincerely,
- Brenden

Ios 8 restrictions password not working

Ios 8 restrictions password not working .... But 'am sure i didnt forget it !! ....what shall i do ?!!

Howdy Kanfoud,
If the iPhone isn't accepting the Restrictions passcode (which can differ from the normal access passcode), you'll need to restore the device.
If you lose or forget your Restrictions passcode, you'll need to perform a factory restore to remove it.
About Restrictions (parental controls) on iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201304
Sincerely,
Allen

Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access?

Apple password not working in iCloud since I updates my email address. Still lists my old email but doesn't accept old password. How do I access the cloud?

To change the iCloud ID ("email") you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

SLD connection user/password not working.

Hello friends,
I am new bee in SAP Netweaver.
I installed SAP Netweaver for java.
Now I want to connect it with BAPI from SAP.
so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
I also tried http://localhost:50000/sld but my user/password not working.
1. What to do to see/get username/password for SLD?
2. How to connect netweaver to access SAP ZBAPI?
Regards,
RH

Hello friends,
I am new bee in SAP Netweaver.
I installed SAP Netweaver for java.
Now I want to connect it with BAPI from SAP.
so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
I also tried http://localhost:50000/sld but my user/password not working.
1. What to do to see/get username/password for SLD?
2. How to connect netweaver to access SAP ZBAPI?
Regards,
RH
Hi Ronny.
Where is your UME running? On the java engine, on an ABAP system or at a LDAP?
What i want to say is that your user has to gain the rights to connect to the SLD. Easiest way is to give you admin rights - to do that you have to know where your userstore is running....
I am not sure if this is correct http://localhost:50000/sld
Normally it should look like http://my.sap.com/56600/sld where my.sap.com is a fqdn and 56600 is the port of the java engine. 66 ist the system number of the as java.
ZBAPI? I do not really know but i think you have to use a jco to connect...
regards,
Martin

Change User password not working in SAP ME 6.0

Hi,
In SAP ME 6.0 SP01 6.0.1.0 Counter 40, the activity "Change User Password" does not work for me or any other user.
The activity window (Netweaver) shows, but in the top it says "An error occurred - contact system administrator".
This is the output from the default trace file. Seems my user is not authorized, but where do I set this authorization?
Br,
Johan
#2.0 #2011 09 06 11:15:11:064#+0200#Error#com.sap.security.core.wd.jmxmodel.JmxModelComp#
#BC-JAS-SEC-UME#sap.com/tcsecumewduimodel#C0000AD3034800820000000100000450#9934850000000004#sap.com/tcsecumewdkit#com.sap.security.core.wd.jmxmodel.JmxModelComp#JONORD#16##380199ECD86811E088C3000000979802#ae0e9d52d86811e08e7a000000979802#ae0e9d52d86811e08e7a000000979802#0#Thread[HTTP Worker [@312363456],5,Dedicated_Application_Thread]#Plain##
public void supplyCompany(IPrivateJmxModelCompInterface.ICompanyNode node, IPrivateJmxModelCompInterface.IContextElement parentElement)
[EXCEPTION]
com.sap.engine.services.jmx.exception.JmxSecurityException: Caller JONORD not authorized, required permission missing (javax.management.MBeanPermission -\#getCompanyConceptEnabled[:SAP_J2EECluster="",j2eeType=UmeJmxServer,name=IJmxServer] invoke)
     at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:100)
     at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:101)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.checkMBeanPermission(MBeanServerSecurityWrapper.java:438)
     at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:288)
     at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:813)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:367)
     at com.sap.security.core.jmx._gen.IJmxServer$Impl.getCompanyConceptEnabled(IJmxServer.java:1415)
     at com.sap.security.core.wd.jmxmodel.JmxModelCompInterface.supplyCompany(JmxModelCompInterface.java:1498)
     at com.sap.security.core.wd.jmxmodel.wdp.InternalJmxModelCompInterface.supplyCompany(InternalJmxModelCompInterface.java:710)
     at com.sap.security.core.wd.jmxmodel.wdp.IPublicJmxModelCompInterface$ICompanyNode.doSupplyElements(IPublicJmxModelCompInterface.java:4301)
     at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:110)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
     at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
     at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
     at com.sap.tc.webdynpro.progmodel.context.MappedNode.createMappedElementList(MappedNode.java:78)
     at com.sap.tc.webdynpro.progmodel.context.MappedNode.supplyElements(MappedNode.java:71)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:263)
     at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:270)

Hi,
Change User Password screen is in fact user self services screen of NW UME and to access it, user must have Manage_My_Password action. Installation and Security Guide ask to assign this action to all roles.

Macbook Pro password not working

When attempting to download software, the password I've always used has not been working. When I click on the question mark, the "loading" symbol just comes on and never turns off. I thought I changed the password just now, but it still is not working.

OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Voicemail Trying to change password not working?

the password change feature online not working?

I do apologize that you were having problems changing your voicemail password via the My Verizon website.
It does appear the issue has been resolved. However, if you continue to have problems, please let me know.
Keep in mind, you can also change your password via the device/phone itself
To reset the Voice Mail password from the wireless handset:
Press *611 then press SEND (airtime is free).
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.
OR
Call (800) 922-0204 (toll free) from any phone to reach the easy-to-use automated customer service menu.
When prompted press 2 then press 1 to reset the password.
Enter the requested information for security verification.
Press 2 to reset the password.

HT4798 username/password not working after upgrade to mountain lion

hello, on my imac after upgrading to mountain lion my computer password and/or username seems not to work anymore: when i want to install an update or search for updates on the app store the combination i used so far, does not work anymore. i tried to find out how to reset the computer password but without too much success, and i'm a bit confused, what can i do? thanks a lot

You went wrong at the very beginning by not erasing the hard drive of a used computer before starting to use it yourself. I suggest you do that now.
Back up all data to at least two different storage devices.
Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume, so you had be better be sure of your backups. Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
Using Setup Assistant
Don't transfer the Guest account, if it was enabled on the old system.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

HT201240 Password not working on New MacBook Pro

Hello. My log in password is not working. I just purchased a Mac book pro and the password I entered during the set up is not working. Does anyone know how I can log onto the system if this happens? I've never even used the laptop yet. Thanks for your input in advance.

Solution may be found if you search in the "More Like This" section over in the right column.
Since your computer is new, you can always call Apple Care. You have 90 days of phone tech support for free.

Password not working.

Similar Messages

Maybe you are looking for