Password now required to run Software Update

My user is set to standard.
In Leopard, I never needed a password to check for updates (only to install them).
With Snow Leopard I have to enter a password every time I check for an update. Is this normal behavior?
Thanks!

Why don't you create another new account (created under Snow Leopard) that is standard ? See if it acts the same way as your current pre- Snow Leopard standard account. I assume you have access to an admin account (or know the person who does) and are using a standard account for some reason.
I just did it myself, and I do get the authentication request when I run Software Update. What I meant earlier is that if this was a change for Snow Leopard, it's one that is probably intentional because it makes sense (at least for the Software Update portion). I don't know what's going on with Virtual Box needing authentication; maybe the app writes files to portions of the system that now require admin level access, where it did not before with Leopard.

Similar Messages

Run software update in non-admin account?

I did some searching through past posts, but the most recent one I found was several years old.
Is there any way to run Software Update automatically in a non-admin account? I run in a non-admin account unless there's some task that really needs admin privileges to complete, for security purposes, but having Software Update not run automatically is rather suboptimal for security.
So, is there any way to get Software Update to check for updates automatically from a non-admin account? (I'm not averse to using the crontab or launchd, if necessary—I've never done it before, but given instructions, I'm sure I could figure it out.
Thanks in advance!

Did some research on this the other day, to see if i could get Software Update to run in the middle of the night like Windows can do.
Software Update requires Root powers, so when you give it your Admin Password your opening a sudo window of 5 minutes for it to complete it's task.
Software Update doesn't check for updates while in Standard User becuase Standard Users supposedly can't do anything about it anyway and it would be a obvious distraction. "Mommy the computer....!!!"
Apple should have a option in Software update preferences to let certain Standard Users know a Software Update is ready just for the purpose your explaining. I run in Standard as well.
I ran some Software Update commands via the Terminal for a launchd just to see what I could do.
Apprantly one can DOWNLOAD updates automatically with launchd in Admin, but not install them because of the need for sudo.
I just misssed a perfect opoortunity (todays update) to run a launchd to do automatic downloads of Software update, then see how to go about installing them afterwards. So fsck me, I'll have to wait now. (unless i use my other machine! ahhh!!)
Anyway the program you want is this little gem: Lingon
it's on Sourceforge (grab the image)
Ok so that takes care of the Software update downloads (man softwareupdate in Terminal for commands)
/usr/sbin/softwareupdate --download --all
Will do the automatic downloads, now it's just a script away to let you know ( a nice pop up window) that you have something in your folder where the Software Update just downloaded into.
That's the next question is where that is and how to run it.

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

Ti G4 PB crashes when running Software Update

I just received a Titanium PowerBook G4 800Mhz used on eBay. Has 512MB ram, 100GB Hitachi 5400rpm hardrive insalled, airport card and came freshly formatted with 10.3 installed and a CD with system patches up to 10.3.9. I reformatted the hardrive and attempted to do a clean install of 10.4 Tiger and here are my issues:
1. After installing 10.4, attempt software update, all current updates and 10.4.3 combo update, experience kernel panic in middle of update with grayed out screen and multi-language message “you need to restart your computer, hold down power button." Everytime I restart and run software update, same problem happens.
2. Restart and go to Apple’s website and download 10.4.1 manually. Installs with no problem
3. Download 10.4.2 from Apple’s site, experience kernel panic, have to hard restart.
4. Download 10.4.3 via software update, computer freezes, but after a couple of hard restarts it installs somehow.
5. With 10.4.3 installed, software update “quits unexpectedly” every time I try to run it.
6. Boot off of Hardware Test CD, run tests, everything test okay
7. Decided to install 10.3 Panther to see if problem is with 10.4
8. Reformat and clean install 10.3
9. Run software update and attempt to install all current updates up to 10.3.9, screen completely freezes during “expanding” portion of update window. Have to hard restart, same problem every time I run software update.
Well, I’m stumped. I’ve attempted everything I can think of and was up till 3am last night trying to figure this out. I’ve run Disk Warrior, reformatted and partitioned the hard drive multiple times in different ways, all with the same results. I just completely reformatted my old white iBook G3 and installed 10.4.3 with no problems, and that machine is older and not nearly as impressive as this Titanium, so it leads me to believe that there is an underlying hardware problem, or at least a firmware problem. Also, the fact that the previous owner sent the computer with 10.3 installed and a CD with individual patch updates makes me think he was aware of the problem with Software Update and wanted me to update using the CD. I don't know, I'm lost at this point. Could it be the replacement Hitachi hard drive? Bad memory? Please, any help is greatly appreciated.
Greg
Ti PowerBook G4 800Mhz 15.2" w/DVI Mac OS X (10.3) 512MB RAM (1slot), 100GB Hitachi 5200rpm internal drive

Well...
It was just a bad RAM chip. The stock 512B chip in the lower slot must have been causing the kernel panics. I took it out and put a new 512MB chip in the upper slot and everything works great now. One thing though, the replacement 144pin PC133 chip I purchased wouldn't work in the lower slot, it fit fine although it wasn't as tall as the stock chip. Installed in the lower slot, the Ti Book would make three beep error sound and not start up. Can anyone tell me why it would work in the upper slot and not the lower? Your input is appreciated
Greg

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

My MacBook is running version10.5.8. running software update but it says no updates available. How can i update software

I've updated my phone to IOS7. My Mac is saying that itunes needs updating to sync my phone. CAnt update itunes until software is updated. My Mac was bought new in 2008.

sons name and year wrote:
I've updated my phone to IOS7. My Mac is saying that itunes needs updating to sync my phone. CAnt update itunes until software is updated. ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes
Be sure to make a Backup of your Current System Before Upgrading...

Thaw computers over remote desktop to run software updates

I've got a network of computers running 10.5.6 and have Faronics Deep Freeze installed. Disabling deep freeze on every machine to run software updates, and then re-enabling it is a colossal pain.
What I want to do is create a workflow that I can send to all computers simultaneously through Remote Desktop that will first thaw the computer, then run software updates, and finally re-freeze the computer. I've never used Automator before, and I'm not really sure where to start. Can anyone give me some ideas?

Thanks for your prompt reply.
OK, maybe I'm missing something basic but then why would I ever want to run Windows network in my office? The bugbear about Macs is that there is certain Windows software for which there is no good Mac equivalent. But you are telling me that as long as I have a couple of Windows boxes, I can run my Windows software on them through my Mac, even though the data files are stored on an separate box (an Xserve).
Now, for the $64 question -- is it possible to set up a network in such a way that I could use RDC on my PowerBook in, say, Chicago to run the software installed on the Windows box and in turn to open and manipulate the files stored on the Xserve in my office, halfway across the world in Abu Dhabi? Would this be a particularly difficult configuration?
Thanks,
DXB Law

Error -36 after running software updates

I'm working at a new place that hadn't run software update in months. I just finished updating everything and now I can't connect to the server anymore. Everyone else in the office is connected, so it's just me. Also, I was connected a few hours ago before I started installing all the updates.
I had security and firmware updates included. Any ideas?
Also, the connection is being made with smb protocol, if that makes a difference. Thanks!
Message was edited by: Libbalou

most of the other computers in the office are PCs. There is only one other Mac. (that user is on vacation and I'm not sure if it will connect or not.)
I'm not sure about the server, but will try to find out and post later. (I came in this morning and nothing has changed).
Thanks again.

Says Java must be updated, when i run software update, no updates

a few programs say that i must update my java to 1.6 from my current 1.5. when i try to run software update, it checks for new updates and says that my computer is up to date. i need to get java 1.6 so please help me out!

Hi vdubin_allday, and a warm welcome to the forums!
Java numbers can be confusing, but Java 1.6 is for Leoprad 10.5.4 or more.
Now there is a Mac OS X 10.4, Release 6 for J2SE 5.0 and Java 1.4 on Mac OS X 10.4.10 and later. This release updates J2SE 5.0 to version 1.5.0_13 and Java 1.4 to version 1.4.2_16.
http://developer.apple.com/Java/download/

Run Software Update

What is the best way to run Software Update from ARD, I am a very new user, the establishment has just got it's liceneses and its great for class management but running commands on 40 Mac's like this would be very useful, any links to useful tutorials or quick explainations would be appreciated
thanks guys

When I run that command on local terminal I get asked for proxy name and password but if i run the GUI menu softwareupdate i don't as its been saved.
running the command as root from ARD with full logging just sits at a screen with the proxy ip listed
how can I pass the username password to the remote command so that it continues automatically please

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

Macbook will not boot up after running Software Update

My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
I cannot get an appointment at my Apple Store before Monday.
Any suggestions?

Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

I have an iPhone4 and require the latest software update 4.3.5 every time i try to get it i get a message error 3194 yet i have the latest software of everything! who can help?

I have an iPhone4 and require the latest software update 4.3.5 every time i try to get it i get a message error 3194 appears yet i have the latest software of everything it is annoying me cause i cant restore my phone either
! who can help?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

How do you automatically run software update using ARD?

Is there a way to automate running software update and downloading all updates using ARD? My current option is to log into each machine and do it manually. (I am also using a OSX server 10.6 if that helps.)
Thanks

Use the the Send UNIX Command option. There's a template in the Miscellaneous section to have the workstations download and install updates; run it as the root user in the Send Command as field so you don't have to worry about a user being logged into each workstation. You can set the command as a task to run on a schedule if you wish.
Since each workstation will download each update, it's most efficient if you can run a Software Update Server and point your workstations to that instead of directly to Apple. Then you don't have multiple downloads taking up your Internet bandwidth. If you have on a few workstations and/or a really big pipe to the Internet, that may not be a concern for you.
Regards.

IPhoto just stopped working. It loads pictures, but then goes into rainbow wheel forever. Then I try to force quit it, and then the whole Mac hangs up (had to power cycle it to get it back). I am using OS 10.5.8, and when I run software update, it assures

iPhoto just stopped working. It loads pictures, but then goes into rainbow wheel forever. Then I try to force quit it, and then the whole Mac hangs up (had to power cycle it to get it back). I am using OS 10.5.8, and when I run software update, it assures me I have up to date software. I have not added any photos since the last time I used it, probably less than a month ago. What gives?

Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Password now required to run Software Update

Similar Messages

Maybe you are looking for