Password 'peop1e' change for Connect ID people

I'm doing the Impact analysis for connect id 'PEOPLE' account password being changed annually to achieve SOX compliance. Can somebody explain to me what are the impact if this will be implemented, where to do the changes, what are the effect if the changes take place and what are the things that needs to consider before doing the changes?

Not a huge deal to change. But in my opinion not necessary for SOX. The id only has read access to 3 tables. It can't cause any damage, that's the beauty of the connect id.

Similar Messages

How to find the when the password is changed for a system User

Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan K

Vijayaraghavan Krishnan wrote:
Hi to all,
We have a test database where our application connects to system user. The application runs more than a month without any issues, But suddenly my system and sys password gets changed. I wonder how this would happen. I have checked with DBA_USERS to check whether the account gets locked, But the account is in the Open state.
I need to find out when the password gets changed for these users and who changed it? Is there any possible to trace it or we need to enable the auditing to find it in future.
Kindly let me know the possible ways.
Regards,
Vijayaraghavan KThe only way to implement an Oracle Audit

Setting up a new email account on mail, the password is entered for connecting to the in

Assuming that in this day and age you want security.
Setting up a new email account on mail, the password is entered for connecting to the in & outgoing servers before SSL is set. Before you can set SSL, mail connects to the servers so email password is transmitted unencrypted?
This seems a very obvious quirk/bug and something that I have always felt uncomfortable about.
Anyone else think this is not a good thing?

Actually it look like all apple devices have the same mail setup procedure, so are your email passwords all being sent over the network in plain text before you get the chance to set the SSL option?
Any security experts care to comment.

Prove Seeded Application Account Passwords are Changed for Audit

We have been asked by our external auditors for the following information:
"Provide proof that the passwords for all seeded application users have been changed from the default password. (ie SYSADMIN, WIZARD, GUEST, AUTOINSTALL)"
I ran the query select * from FND_USER where created_by = 1 to get the list of seeded application users:
ANONYMOUS
AUTOINSTALL
CONCURRENT MANAGER
FEEDER SYSTEM
INTIAL SETUP
APPSMGR
SYSADMIN
WIZARD
PORTAL30
PORTAL30_SSO
All of the above accounts have been end-dated except for the GUEST and SYSADMIN account. However the auditors still want me to prove that the passwords for all seeded accounts, including those that have been end-dated, have been changed from the default password.
I know that I can use the following command to test the passwords:
select fnd_web_sec.validate_login('GUEST','GUEST') from dual;
I know the default passwords for SYSADMIN and GUEST but I do not know what the default passwords are for all the other accounts to use in the above command. I have searched Metalink and this forum and I am not able to find the default passwords for the seeded accounts such as AUTOINSTALL, WIZARD, etc.
I would appreciate it if someone could provide this information or point me in the right direction.
Thanks.

Hi,
The best security practice it to disable these account (except for SYSADMIN, and GUEST and some other accounts), and this is exactly what you did. So, auditors should not bother you about the password change as long as those accounts are disabled.
I am not sure about the default password of those accounts but I assume it is same as the username.
Note: 418767.1 - What Is The Impact Of Disabling Oracle Seeded Users.?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=418767.1
Note: 189367.1 - Best Practices for Securing the E-Business Suite
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=189367.1
Regards,
Hussein

HT201974 I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password.

I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?

Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy

Can we avoid specifying User ID & password for connecting to LiveCycle server through code?

Hi,
I am developing a JAVA program that connects to the LiveCycle ES server to assemble two PDF files. Here is some part of the code I am using. The code works fine.
Properties connectionProps = new Properties();
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
If I do not use the credential info (user ID and password) I get some credential exceptions. Is there a way that I can avoid providing the credential information? The reason for this is I do not want to hardcode the user ID and password information as the password can change. Is there any other way to solve this issue?
Regards,
Ragha

You can turn security off from your process.
Go under adminui under Services/Application and Services/Service Management.
Search for your process and under the security tab you can disable the security or use the 'Run As' feature to run under a specific user context.
Jasmin

My account asks me to change my password every week for no reason and i have different security questions for the same account

My account asks me to change my password every week for no reason and i have different security questions for the same account

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Try changing the security on the router. Start with no securty as a test.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

Ever since i forgot my apple id password and changed to a new one, I am continually being asked to enter my iCloud password. It then says that this mac can't connect to iCloud because of a problem with "my username". nothing I do in in preferences helps.

ever since i forgot my apple id password and changed to a new one, I am continually being asked to enter my iCloud password. It then says that this mac can't connect to iCloud because of a problem with "my username". nothing I do in in preferences helps.

You have to sign out completely in System Preference>iCloud (click 'Sign out') on a Mac, or Settings>iCloud on an iOS device (click 'Delete account' - this will not delete the account from the server). Then sign in with the new password.
Your iCloud data will disappear from your Mac or device when you sign out but will reappear when you sign back in.

TS1398 my ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wif

My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.

- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

ERROR: Could not encrypt password for Connection

Hi
I am trying to create and run demo application for 'Dveloping RIA using ADF and JDeveloper 11g'.
When I try to run the application it throws the error- ERROR: Could not encrypt password for Connection 'MyDatabaseConnection'.
Anyone please guide me how to resolve this issue.
Thanks

Can you try delete the Connection and re-create another one to see if it fixes the issue?
-Arun

The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch, Mid 2011 and Mac OS X Version 10.7.3

The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch Mid 2011 and Mac OS X Version 10.7.3

I've no idea why it has stopped working, but you could reset it:
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

How to change password of sys user connected as sysdba?

How to change password of sys user connected as sysdba?
I have connected with user name sys as sysdba in oracle 9i with password oracle.
I want to change the password . I typed password and pressed entered. It asks me to type old password, then new password and retype the new password. When I press enter it gives error message "ERROR:
ORA-28008: invalid old password"
Password unchanged.
does anyone know about this...? how to change the password..?

You may be using operating system authentication to log in as sys with sysdba privileges.
By using password utility, you can change the password of sys user (which is in database) which is "change_on_install" when you create a database.
You can change this password.

Svrmgrl - disable password for connect internal

I have installed Oracle 8.1.5.
When I tried to create a database using svrmgrl manually, I entered the following:
svrmgrl
svrmgrl> connect internal;
Password:
Please advise how I can turn off the Password option for connect internal as in previous version of Oracle.
Thanks

Christian is absolutely right. The user must be a member of the
dba group which you identified as the default database grup
during the installation.
The default is dba. If you chose another group, run the installer
again and choose Perform Adminstration Tasks, relink the
executables and try again.
Peter CARON
Senior Technical Consultant
Oracle Internal Training
Munich, GERMANY
Christian Pomar (guest) wrote:
: M.Menzel (guest) wrote:
: : Hello linux-users,
: : if i start svrmgrl i have the ora-12546 error, and
: : i have no idea of the password from user internal!
: : Whats my fault?
: : Thanks
: : Mikel
: There is not too much information about your problem, but ...
: are you in the dba group? I you are working directly on the
: server and you are in the dba group, you should be able to
: connect as internal with no problem...
: Hope it helps.
: Christian Pomar
null

Password 'peop1e' change for Connect ID people

Similar Messages

Maybe you are looking for