Password policy not working fully through SPML

We've come across a problem with password policy enforcement on IdM 6.0 where the "Number of Previous Passwords that Cannot be Reused" gets ignored. Consequently I can set the password back and forth between two values without error.
If I attempt this through the IdM password interface, I get the message:
{color:#ff0000}*Policy Violation (Password on Lighthouse User): New password cannot match any of the 4 previous passwords for this account.*
{color}
This is the response I am after through the SPML interface.
Should this be supported? If it should be, where might I be going astray.
The "Identity system account policy" set on the organisation I'm using is correctly configured to use the password policy as far as I can tell.
Edited by: SuperDuperJavaSnooper on Aug 19, 2009 9:44 PM

How do I go about reporting this as a bug of IdM 6.0?

Similar Messages

OAM Password policy not working.

Hi All,
I am configuring a password policy in OAM which enforces the user to reset his password at first login. OAM is using OID as user store and I have added oblix password related objectclasses to OAM schema. OIM is used to provision all users to OID. I have also enabled the Checkbox Change on Reset in password policy.
I have also made certain attributes visible in OAM user manager such as obpasswordchageflag, oblastsuccesfullogin, oblastfaillogin etc.,
Once the user is created in OID through OIM, the values for attributes obpasswordchageflag, oblastsuccesfullogin, oblastfaillogin are empty.
Case1: obpasswordchangeflag attribute value is empty for user say oamtestuser. oamtestuser logs in to OAM protected application with default password provided in OIM. I could see the oblastsuccesfullogin attribute value updated in oamtestuser profile as expected. Similarly oblastfaillogin value also got updated for failed login as expected.
Case2: obpasswordchangeflag set to true manually in user profile for oamtestuser. oamtestuser logs into OAM protected application with default password. Upon submit, user is redirected the change password page which prompts the user to enter current password and new password. Upon submit user will be shown another page with backup button. Upon clicking back button, user is asked to login to the application once again with new password. Upon submit, user is shown change password page again instead of logging to application with new password. I have noticed that obpasswordchangeflag attribute value is still set as true.
Case3: After executing Case2, even after modifying the obpasschangeflag value to false or making empty, the attribute values of oblastsuccesfullogin and oblastfaillogin are not getting updated accordingly.
Please let me know if you have any clue on this.
This is really urgent. Would appreciate quick help.
Thanks.
Mahendra.

HI Sagar,
Thanks for the response.
Another major update: When we tried creating user using OAM workflow, the obpasswordchangeflag got true value by default and password change functionality worked as expected. So it is obviously an issue with provisioning user through OIM. We manually created an attribute obpasswordchangeflag and provisioned a new user with value as true but still the user profile in OAM User Manager for attribute obpasswordchangeflag is empty. This means that there needs to be some mapping which we are missing i.e., an attribute in OIM has to be mapped correctly with OID attribute obpasswordchangeflag .
So we are searching for this mapping stuff. Do you have any other opinion on this?
Thanks
Mahendra.

Password policy not working?

I'm a little confused as to why a global OD password policy to change passwords on first login will not function. All users already have a single working password.
Consequently, I've used a USER based policy in WM, but this asks the user to enter a new password and then doesn't allow any further progress.
Any ideas?

I believe that, in OID 10.1.2, the new password policy will not take effect until after the user's password has been changed.

Several years ago I had an itunes account through my work email address. I have since left the company. When I tried to access the itunes I purchased, my password would not work because I no longer had access to that acct. How can I access that acct?

Several years ago I had an itunes account through my work email address. I have since let the company but when I tried to access the songs I'd already purchased, my password would not work because that account no longer existed. I ended up having to open another account but how can I access that account to retrieve my other songs? I realize I can't transfer between accounts but maybe at least burn to CD?

Hello, RSchultz13.
Thank you for visiting Apple Support Communities.
You can reset your Apple ID password via the steps in the first article below. I would try the option to answer your security questions. If those steps do not work then you may need to reach out to our account security team to reset this old Apple ID password. Once this is done you should be able to access your old DRM protected purchases.
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

SAP* and DDIC password is not working in Cleint 000

Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.

Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks.

EHP4 installation using EHPI : Error message: DDIC password does not work:

Dear All,
We are upgrating enhancement packages 4 using EHPI in 64 bit server. I am facing this error in Extraction phase , I have to provide DDIC / SAPServiceSID/ DB specific , next says ddic password is not correct. But when i tried to login with the same password into 000 client, it works. But when through EHPI , it throws error. Kidnly check the error and please suggest me ... Thanks in advance..
Error message: DDIC password does not work: RFC call to failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM DEST=R3D, GWHOST=SAPRBSBD-01, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner 'SAPRBSBD-01:3300' not reached TIME Thu Dec 24 12:27:13 200 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: 192.168.1.40:3300 SYSTEM CALL connect ERRNO 10051 ERRNO TEXT WSAENETUNREACH: Network is unreachabl.
Regards
Raj

Dear Rajeev,
DDIC pwd for 001 is not same as 001,Will that be a problem ? But the Extraction requests for DDIC 000 client password. Are you sure UME comes into this scenario ?
@ Raghu - I have checked the link and it speaks about the resetting the EHPI. I dont want to reset and want to solve ddic password error.
Sorry if am wrong
@ Gerard,
Yes the hostname is SAPRBSBD-01.I am able telnet the IP 3300 and it works fine. FQDN SAPRBSBD-01.chen.local. The smicm service entries are with SAPRBSBD-01 but not with FQDN. Changing it to FQDN will help us to resolve the issue. Please suggest me.
Also the error refers to some RFC connection, any idea on that.
Thanks to all and looking for your valuable suggestions.
Raj

My ipad mini is disabled and password is not working

Ipad mini disabled and password is not working. Unable to get serial because can't unlock ipad. Have not previously synced with a computer.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My iTunes password does not work on my iPhone...

My iTunes password does not work on my iPhone, but it does on my MacBook. Why? This is really annoying. How can I solve my problem? I don't even know how to contact Apple.

dennythepest wrote:
My iTunes password does not work on my iPhone,...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

My Apple store ID password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn't receive any email from apple

My other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple

You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

ICloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]].

TACACS enable password is not working after completing ACS & MS AD integration

Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,

Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles"

My appleID password is not working on my iPhone.

I have reset, resynched, reassociated my ID nothing is working. I only noticed it yesterday and I think it's only been a week or so. I noticed my phone and none of my ipods are associated with my itunes even though they have been for at least two years. I added an ipad last month. The password is not working on the ipad either. Please help! It works in my actual itunes and apple account when I log in on my laptop.

https://discussions.apple.com/thread/5478030?tstart=0

After a restore from Time Machine my login password does not work.

My HD crashed and I replaced the HD. I then restored from Time Machine. After it was done restoring it prompted me for my apple ID and password and account info. Now when I try to login, the password does not work. After several failed passwords, it says I can reset my password using my apple ID. How do you do this? I click on the message and it just disappears. I can't login!

Is it your actual Apple ID login password that you're talking about (which is obviously working since you got into this forum) or the password for your user account. If the latter, simply boot to your ML Recovery partition (holding down the Command and R keys while booting) and set a new password via Terminal.
Boot into your Recovery partition and, from the Utilities menu, open Terminal. In Terminal, type in:
resetpassword
...a small app will run allowing you to select a user and change the password for that use. Enter the new password twice (the second time to verify) and give yourself a password 'hint'. Then reboot and use your new password on your account.
Clinton

My newly changed apple password is not working on my MacBook to help me change my password to log on?

I just need help changing my password on my MacBook to log in. But my log in password and newly changed apple password are not working. Can I reset it or change the password another way or get a list of past password to try if those might be what the Mac thinks is my password still?

You can reset it.
For Snow Leopard and previous.
http://support.apple.com/kb/ht1274
For Lion and later.
https://discussions.apple.com/docs/DOC-4101

Password policy not working fully through SPML

Similar Messages

Maybe you are looking for