Password pompting

Hi,
Our environment is having windows 2003 domain controllers with 3 sites and in one site there is a server with some shared folders, today they are complaining users are prompting for password when try to access shared folders in that server and the password
is not accepting.
This issue goes a way once we restart the site ADC and appears again after few hours. There are no errors in the domain controller as well.
Please give a point to troubleshoot.
Thanks,
Kanishka.

> are complaining users are prompting for password when try to access
> shared folders in that server and the password is not accepting.
Most probably, this is a kerberos issue - try to access via IP, does
this work? If yes, I suspect the krbtgt password to be out of sync on
the site DC. To resolve:
Stop and disable the KDC service on the affected DC, then restart the
DC. This will force the DC to obtain its own TGT from another DC, thus
syncing the krbtgt password.
> This issue goes a way once we restart the site ADC and appears again
> after few hours. There are no errors in the domain controller as well.
This "few hours" - are they somewhere near 8 hours? This is the default
lifetime of a kerberos ticket :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Similar Messages

Adt and a password may be incorrect

I am tyring to package up a air file to a apk file in windows 7 using the command pompt.
here is the command I run
adt -package -target apk -storetype pkcs12 -keystore DigitalCertificate.p12 myApp.apk MyApp.air
the cmd askes for my password, which I enter, and do so correctly, it is only 123 so I know I am not typing it wrong.
I get the following in the cmd
could not load keystore file (password may be incorrect)
usage:
adt -checkstore SIGNING_OPTIONS
I created the p12 file in Flash Builder, I have tried createing multiple p12 files, and then I re build my .air file and try again, same thing everytime. Does anyone have any idea?
Thanks

I am having the same issue.
I am following the tutorial here: Adobe AIR * Creating your first AIR application for iOS.
This is the command I am using:
adt -package -target ipa-debug -keystore ios-development-certificate.p12 -storetype pkcs12 -provisioning-profile ios.mobileprovisionn HelloWorld.ipa HelloWorld-app.xml HelloWorld.swf icons
I am prompted for the p12 file's password, which I provide.
I get the following error message:
could not load keystore file (password may be incorrect)
When I test the password using the following command, the test succeeds:
adt -checkstore -storetype pkcs12 -keystore ios-developer-certificate.p12 -provisioning-profile ios.mobileprovision
password:
valid password
Please help.

Puppet Master - Azure virtul machine root password

Hi,
I have created a Puppet Master virtual machine from the Gallery.
After successful virtual machine creation, as per instruction I need to refer the installation answer file to get the e-mail id and password. ( or set it).
But that file don't have read/write permission to the user what we have created at the time of the Virtual machine creation.
What is the root user password of my virtual machine?
How to give the permission to the specific answer file with out using the root user?
Cheers, Senthilraj

Hi，
When you create a Linux VM in Azure, you can upload an X.509 certificate or provide your password to sign in to a virtual machine. Which kind method did you select when you created the Puppet VM?
You can connect to the VM’s full DNS name "xxx.cloudapp.net” with SSH and login with the username you specified during setup.
If you don't set a password for the root account, you can run the command below to pompt for a new password:
sudo passwd root
Then you can run "su" and provide the password to turn to the root account.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Default Encrypted Password

Dear All,
i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD .
How can i insert Encripted password into table.
Thanks

Hi Vedant,
See the CUSTOM_HASH function that is installed with sample application in the APEX.
Here is the code for it:
create or replace function custom_hash (p_username in varchar2, p_password in varchar2)
return varchar2
is
l_password varchar2(4000);
l_salt varchar2(4000) := 'XFSPL28ZTWEWWM6FHWMK68AG5NQVLU';
begin
-- This function should be wrapped, as the hash algorithm is exposed here.
-- You can change the value of l_salt or the method of which to call the
-- DBMS_OBFUSCATOIN toolkit, but you much reset all of your passwords
-- if you choose to do this.
l_password := utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5
(input_string => p_password || substr(l_salt,10,13) || p_username ||
substr(l_salt, 4,10)));
return l_password;
end;
i want to insert encrypted Password of 'password' string into table user_dtl column PASSWORD.The above function will give the encrypted password which can be inserted into USER_DTL as follows:
INSERT INTO USER_DTL(USERNAME,PASSWORD) VALUES(:P1_USERNAME, CUSTOM_HASH(:P1_USERNAME,:P1_PASSWORD))Be sure that PASSWORD column in USER_DTL is of type VARCHAR2 and of adequate length as to accommodate the encrypted password.
Hope it helps!
Regards,
Kiran

Installed adobe but password won't work to read on tablet

Installed reader and adobe on new tablet, but adobe password will not work to let me read. I reset
Password but that doesn't help

A password protected PDF? How did you reset it?
What's the operating system on that tablet?

TS2446 My phone want let me download apps I put the password in then it's say billing options which tell me I have invalid security code

My phone want let me download any apps when I put the password in it take me to billing option which tell me I have the wrong security code and that's the security code that was on the card on the account

iTunes Store: My credit card's security code or zip code does not match my bank's records
http://support.apple.com/kb/TS1646

HT4623 MY i phone 5 wont let me download apps etc it just keeps asking for my apple id password?

Juat got my i phone 5 today and have opened an apple accout but it wont let me download apps etc just keeps asking for a password over and over again???

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

It seems when i try to login to Netflix it comes back with email id or password is incorrect (code 117), i can't find anything to fix this, help!!!

I've tried everything, reset, unplug, even have it connected via Ethernet, always the same outcome! I can login on our iMac with no problem!

Finally someone who found the solution. I've been searching for the answer for a while, some people suggest resetting the Apple TV, reverting to the previous firmware, changing password to all numbers, you name it.
The right answer is: make sure to have a password with both letters and numbers. Someone at Apple must have thought to override the password requirements of Netflix, without telling anyone else. They need better change management procedures!

SRM 5.0 - how to change default password?

Hello,
Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
Any help is appreciated.
Thanks

Propblem resovled, find the corresponding function group and screen, then change the translation.

SSL private key password

Hello everyone,
I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0 SP2
with WLP 7.0 SP2. Everythng is fine except for that we cannot use the same
SSL certificate. By defaul the private key is not encrypted with password
(SSL.KeyEncrypted = false by default, according to the documentations) in
both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script results the
following error:
<Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
<Inconsistent se
curity configuration, java.lang.Exception: Cannot read private key from file
C:\
bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
sure pa
ssword specified in environment property weblogic.management.pkpassword is
valid
.>
java.lang.Exception: Cannot read private key from file
C:\bea7\user_projects\age
ncyPortal\portal_islandinsurance_com-key.der. Make sure password specified
in en
vironment property weblogic.management.pkpassword is valid.
at
weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
ava:434)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Is this happening because the private key is actually encrypted with the
password? It was working, although the KeyEncrypted is not set to true and
the startup script for WLS 6.1 instance did have a line
with -Dweblogic.management.pkpassword. Or could this error be result of
something else? The physical machine the instances are located is the same
and IP address and the DNS entry hasn't been changed, either.
Any insight will be greatly appreciated. Thanks!
Makoto

Thanks Tony - it worked!!
"Tony" <TonyV> wrote in message news:[email protected]...
It may be because the private key is both unprotected and in DER format.
There are some things to try:
1) Convert the private key file from a DER file to a PEM file and try
that:
a) Follow the for converting an unprotected private key at:
http://e-docs.bea.com/wls/docs70/adminguide/utils.html#1143743
b) Look at the resulting PEM file, it should look something like
this:
-----BEGIN RSA PRIVATE KEY-----
-----END RSA PRIVATE KEY-----
(Be sure there is no extra lines or whitespace after thefooter)
>
c) Change your configuration to point at the PEM file
If that doesn work, then you can try protecting the key with apassword
using
the wlkeytool utility (It should be in the server/bin directory). The
tool should prompt
for a password to use to protect it:
wlkeytool inputkey.pem outputkey.pem
Then change your configuration to use the protected private key, andset
the passwod to use.
Tony
"Makoto Suzuki" <[email protected]> wrote in message
news:[email protected]...
Hello everyone,
I'm trying to upgrade a WLS 6.1 SP2 with WLP 4.0 SP2 instance to WLS 7.0SP2
with WLP 7.0 SP2. Everythng is fine except for that we cannot use the
same
SSL certificate. By defaul the private key is not encrypted withpassword
(SSL.KeyEncrypted = false by default, according to the documentations)in
both WLS 6.1 and WLS 7.0. But running WLS 7.0 startup script resultsthe
following error:
<Sep 17, 2003 5:06:40 PM HST> <Alert> <WebLogicServer> <000297>
<Inconsistent se
curity configuration, java.lang.Exception: Cannot read private key fromfile
C:\
bea7\user_projects\agencyPortal\portal_islandinsurance_com-key.der. Make
sure pa
ssword specified in environment property weblogic.management.pkpassword
is
valid
.>
java.lang.Exception: Cannot read private key from file
C:\bea7\user_projects\age
ncyPortal\portal_islandinsurance_com-key.der. Make sure passwordspecified
in en
vironment property weblogic.management.pkpassword is valid.
at
weblogic.security.service.SSLManager.getServerPrivateKey(SSLManager.j
ava:434)
atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:153)
atweblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:122)
atweblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1513)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:852)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:295)
at weblogic.Server.main(Server.java:32)
Is this happening because the private key is actually encrypted with the
password? It was working, although the KeyEncrypted is not set to true
and
the startup script for WLS 6.1 instance did have a line
with -Dweblogic.management.pkpassword. Or could this error be result of
something else? The physical machine the instances are located is thesame
and IP address and the DNS entry hasn't been changed, either.
Any insight will be greatly appreciated. Thanks!
Makoto

RBACx Encrypted Password Change Utility

Hi all,
In the OIA/SRM installation guide, there is a reference to a tool, to find out the password of rbacxservice.
"Oracle Identity Analytics utilizes an encrypted password when communicating with the database.
To change the default database password, use the RBACx Encrypted Password Change Utility"
Could you please help me finding out this tool.
Many thanks in advance.
Warm regards,
Manipradeep Sunku.

The mentioned tool only encrypts the password so that you don't have to store a plain text password in the config file. It does not decrypt it. The default rbacxservice password is rbacxservice.
The tool does not come with the OIA/SRM distribution so if you need it, you will need to contact support.

ACS 5.3 Default Backup Password

When doing a backup on any of the ACS 5.x appliances by default the backup is encrypted with PGP. What password is used for that? Is it configurable?

It is not configurable and that information wasnt made public. However, when you restore it should be able to decrypt it just fine.
You can try opening a TAC case but when I was in TAC wasnt able to find that key either.
Thanks,
Tarik Admani
*Please rate helpful posts*

How to change the default JET (JumpStart) password

I am using JET (Jumpstart Enterprise Toolkit) to jumpstart my servers. The default password, boajrOmU7GFmY, is saved in a encrypted form in jumpstart.conf. I want to change it, how do I know the encrypted form of my new password?
Tom

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!

The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

Does iTunes have a default password for initial encrypted backups?

I have an iPhone that was connected to iTunes for the first time today. It is a company device and IT has set a policy to require backups to be encrypted.
When I first plugged the phone in, iTunes automatically did a backup as it had never seen the device before. Due to a software issue, Apple recommended that I do a restore to factory settings and then restore from backup, so once the initial backup was completed, I performed the restore to factory just fine. However, when I attempted to restore from backup, I was prompted for a password even though I was never prompted for a password when iTunes created the backup. I have tried every password I can think of including my company domain password, iTunes password, iPhone passcode, etc...etc...to no avail.
Does anyone know if there is some default password that iTunes using when doing an initial backup without prompting the user for a password?

Caronold -
I have the same problem when i updated to iOS6 3days ago from iOS5.1.1. I've tried every passwords i can think of but NO luck.
Even the folks at genious bar said : good luck!!
A Third party software that can decrypt?

Password pompting

Similar Messages

Maybe you are looking for