Password problem after upgrade to m lion

After upgrade to m.lion, cannot log my password to finish the upgrade as the system is no more recognizing my password !!; am using azerty keyboard. Thank you for ur help

What is the setting of your profile parameter login/password_downwards_compatibility?
If the users are logging on for the first time and you are not permitting downward compatibility, then you either need to permit it or reset their passwords for them once -> to form the new PASSCODE hash.
Cheers,
Julius

Similar Messages

  • Mail sorting problem after upgrading to Mountain Lion?

    I have a strange problem with Mail after upgrading to Mountain Lion.
    Before upgrading, when I tried to search my Mail Inbox for e-mails from a specific sender, the esearch results would be indexed by the name of the sender. For example: when I entered 'John Smith' in the search box in Mail, it would display a list of email from 'John Smith'
    Now after upgrading, the same query indexes the search results by the 'To' address i.e. my email address.For example: if my name is 'Steve Johnson', a search for 'John Smith' in the search box in Mail displays a list of email to 'Steve Johnson' and not from 'John Smith' which is how it used to display before.
    My emails are sorted by Date always, and I am using the default Mail view [not classic view]
    Can someone please help with a fix for this to help me get back to the original display I had while searching? Thanks in advance.

    I'm having the same problem.  It's incredibly annoying!!!  Did you find an answer?

  • How to correct battery drainage problem after upgrade to mountain lion

    My macbook pro battery drains very fast, just used 3% as I am entering this question. This rapid battery drain started after upgrade to mountain lion. Any advice?

    This appears to be a problem that's affecting a number of users and has been widely reported. My guess is you're going to have to wait till they do a software update.
    There's general tips for conserving battery power on my page here that might ameliorate matters in the meantime:
    http://applehelpwriter.wordpress.com/2012/04/23/how-to-make-your-battery-power-l ast-a-bit-longer/
    Be sure to report the problem to Apple directly here:
    http://www.apple.com/feedback/
    - every extra complaint helps to add a little urgency.
    (ToU Disclaimer: this link to my site contains other links which promote my services as a technical writer)
    Message was edited by: softwater

  • Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

    Hi !
    I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
    Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
    I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
    Anybody got a solution to this other than using the iMac for offline use only ?

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • Password problem after migrating to Mountain Lion Server

    Hello everyone,
    Yesterday, I migrated our Lion Server to Mountain Lion Server. Everything seemed to work fine. Except since this morning, none of the network user cannot connect to their calendar, reminders, and wiki. They can connect to their account and to their mails. The following line appears multiple times in ApplePasswordServer.Error.log:
    Aug 16 2012 16:52:50 700250us    client response doesn't match what we generated
    It seems that only web services are concerned (vpn, mobile accounts, and mails are working). My initial guess is that the hash computed on the basis of the user password is not computed on the same way on the client machine (which is running Mountain Lion by the way) and on the server. On the other hand, this would be very surprising, since all this stuff is based on standards and unlikely to have changed since Lion.
    I tried to create a new "Test" user. Even this new user, created after the migration, cannot connect to its calendar, etc. I also tried to reset my user password using the Server App. It makes no difference, the same lines appear in the logs.
    Is anyone experiencing a similar problem ? Does anyone have a clue of what to try next ?
    Thanks a lot !

    I found out the following:
    After looking at the contents of the password server database using the slot numbers of several user accounts, it seems that all users where WEBDAV-DIGEST authentication is failing, have two entries for the digest method "*cmusaslsecretDIGEST". This is obviously wrong. All users who can authenticate successfully have only one such entry.
    Deleting and recreating the user account has no effect. In fact, updating the password server with a new entry may actually trigger this error. It could be that all users where this is failing have changed their passwords after the server was updated to Mountain Lion.
    It would be interesting to know if you also see duplicate entries for "*cmusaslsecretDIGEST" in the database. You can display a password server record via the user account's slot number (in your example, the 0xd6ace...) using the command
    sudo mkpassdb -dump <slot-number>
    At the end of the record dump, you should see 10 digest entries with their method identifiers.

  • Gmail problems after upgrading to Mountain lion

    After recently upgrading to new moutain lion I am having probems with Gmail.  I am told to download the latest version of safari.  I have checked and am indeed running the latest version of safari.  Can anyone advise me on what to do please.

    http://help.yahoo.com/kb/index?page=content&id=SLN3526&actp=search&viewlocale=en _US&searchid=1366672139377&locale=en_US&y=PROD_MAIL_ML
    This link helped! also after doing this for my Yahoo! account the other account I was trying to add began to work as well. Hope this fix lasts! Thank you Compukid!

  • Problems after upgrading software to Lion

    I recently upgraded my Spring 2011 15 inch MB to lion and ever since it has became painfully slow.  Anything I can do to resolve this?

    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab. Select All Processes from the popup menu in the toolbar, if not already selected. Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Now select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log – the text, please, not a screenshot. If there are repeats, please post only one example of each repeated message.

  • IWork and iPhoto problems after upgrading to Mountain Lion.

    Since I have upgraded to OS 10.8.2 (Mountain Lion), iWork would not load and I can't export pictures from iPhoto.  I am using a MacBook Pro 17", early 2008, with 1 Tb hard drive and 4 Gb RAM.  Any help will be appreciated.  Thanks.

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • Login problem after upgrade to mavericks

    Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.

    Hi cpuman8,
    Thanks for visiting Apple Support Communities.
    If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
    Resetting the original administrator account password
    In OS X Lion or later, you can reset your user password with your Apple ID.
    OS X: Changing or resetting an account password
    http://support.apple.com/kb/ht1274
    Best Regards,
    Jeremy

  • After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem?

    After upgrading to Mountain Lion my 2009 (early 2010) iMac mutes audio when awaking or when it goes to sleep. Anybody else having the problem? My other iMacs are not having that problem. I'm not sure if I am missing an option somewhere or what is going on.

    http://www.reedcorner.net/understanding-upgrade-nightmares/ (Thomas)
    See if you have supported applications > http://www.roaringapps.com

  • Problems with my second monitor after upgrading to Mountain Lion

    Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
    Have anyone experienced the same problem?!

    Hello Carlo!
    Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
    Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • HT4798 username/password not working after upgrade to mountain lion

    hello, on my imac after upgrading to mountain lion my computer password and/or username seems not to work anymore: when i want to install an update or search for updates on the app store the combination i used so far, does not work anymore. i tried to find out how to reset the computer password but without too much success, and i'm a bit confused, what can i do? thanks a lot

    You went wrong at the very beginning by not erasing the hard drive of a used computer before starting to use it yourself. I suggest you do that now.
    Back up all data to at least two different storage devices.
    Boot into Recovery (command-R at startup), launch Disk Utility, and erase the startup volume. This operation will destroy all data on the volume, so you had be better be sure of your backups. Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
    When you reboot, you'll be prompted to go through the initial setup process. That’s when you transfer the data from one of your backups. For a walkthrough, see here:
    Using Setup Assistant
    Don't transfer the Guest account, if it was enabled on the old system.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.

  • Printer Problems after upgrade to Lion

    Does anyone have this printer problem after upgrading to Lion. A perfectly functioning laser printer on my network prior to upgrade - now the network seems to drop the printer and show it as "not connected" approximately every 30 minutes ???

    Hi Paul,
    Been away and just got back to this issue.
    Thanks for the info. The OKI site has now posted a list of all their Printers and their relative drivers for compatibility with "Lion". My machine is due an updated driver from OKI in Mid Decmber according to this notice.
    Meanwhile, as the printer does work with some tweaking I guess I will use the work around until the new driver is available. My legacy printers that i use for special jobs both work and as I do not have the disks for their drivers I am loathe to re-set the printer system at this time.
    Thanks for your assistance in this issue.
    Regards,
    Mike, Rustington.

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • AIR+JS Application in multiple clients, but all must have the same data

    Grettings. After googling, reading docs, and everything i cant find a solution to my problem. The thing is that i must create a adobe air app that must work in 4 clients. All the data from all the clients must be available to all the of them. If Numb

  • Error while dropping user

    Hi, While i m trying to drop a user it shows the following error: ora -04021:timeout occurred while waiting to lock object sys.dbms_lock; The user is not dropped.How to avoid this error??? Thanx..

  • Add Column Delete  in report, How to delete row using this delete Option

    Hi Friends, i have a report ,iwant to add an option DELETE in last column.When i click on DElete then respective id sholund be deleted. My Table Is CREATE TABLE  "DUMY_FILE"    (     "ID" NUMBER,      "NAME" VARCHAR2(500),      "FILE_OBJ_ID" NUMBER,

  • Issues with Sync

    When attempting to Sync my iPhone 4S, iPad, or iPad2, some movies/music sync while for others I get an error "iTunes could not copy "movie name" to the ipad "John iPad" because the file could not be written".  I can sync via wifi without issue. Had n

  • ContentIteartor with listItemColletion.

    Hi all, I have one list on which i am using contentIteartor to fetch the list items which i am returing as ListItemCollection. But my issue is that the first item which i am getting is Forlder,on which i am not able to get the item columns and not ab