Password protection compatibility and using from our website

I have a spreadsheet that was created in Excel 2013 with each sheet password protected, and there are two problems with opening it in Excel 2003, on a computer that has the Microsoft compatibility add-on fileformatconverters.exe that allows it to open files
created with later versions.
1) When I open the spreadsheet in Excel 2003, I can unprotect it without entering the password. Is there a way to require the password in 2003, same as when someone opens it in Excel 2013?
2) I posted a link to the spreadsheet on our website. If I try to open it from the website with Excel 2003, it thinks it is a zip file. I can save it to my desktop by changing the file extension to xlsx, but is there a way to make it so that outside
users can simply click on the file and it recognizes the file type?
Thanks in advance to anyone who can help with these two issues.

It's actually very easy to password protect a non-iWeb site on MobileMe.
But you need iWeb first.
Go to MobileMe and make a copy if your current index.html file.
Start iWeb.
Create a Site.
Select password protect in the setup and publish to MobileMe
Visit your site and make sure it displays the login window.
Do not login otherwise you cannot verify it in the next steps.
Go to MobileMe again and open the folder with the Sitename.
Delete everything you see.
Publish your RW pages to that folder.
Delete the index.html file in the root and rename your copy index.html again.
Now visit your protected Site.
Enter the details.
Your RW site will show.
Go back to iWeb.
Change the publish settings to folder. No need to select one.
You can now safely deelte the Site if you want.
Or keep the site and make a note on the page to remember the password in the future.
Practice.

Similar Messages

  • Create and Password protect a pdf using VBA?

    Hi,
    I have a requirement to generate and password protect a pdf using a Microsoft access application (version 2007).
    I have seen plenty of code examples for generating the pdf, but is it possible to password protect the pdf programmitically?
    Thanks!

    is it possible to password protect the pdf programmitically?
    Yes, you can write a plugin for Acrobat.

  • I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past login page. I even had to use Internet Explorer to login to ask this question!

    I try to log in to password protected sites and nothing happens but works fine on Internet Explorer. Can't get past log in page. I even had to use Internet Explorer to login to ask this question!
    On the page where you enter username and password after entering and pressing "Log in" the page just stays in place. If you look at the error log you see
    "Warning: Unknown property 'border-radius'. Declaration dropped.
    Source File: https://support.mozilla.com/media/css/common-min.css?build=3fabbc0
    Line: 1"

    Make sure that you do not block the referrer.
    * http://kb.mozillazine.org/network.http.sendRefererHeader
    Also make sure that you do not block cookies in Firefox or the firewall.
    * [[Cookies]]
    * [[Enabling and disabling cookies]]

  • Is there a way to password protect a single Muse page on website?

    Is there a way to password protect a single Muse page on website?

    There's no function within Muse to do this. Have a look at this thread, it might be of use.
    Re: Can I create a login/password protection in Muse for a HTML5 page or two?

  • I am a new iPad user and cannot figure out how to copy and paste from a website to pages. Any insight?

    I am a new iPad user. I cannot figure out how to copy and paste from a website to a pages document, and vice versa. Any ideas?

    Long press on the text you would like to select (tapping and holding) and then release after the magnifying glass shows up. This will select a single word. Then use the blue dots and drag them to select a region of test. Then press "copy". Open pages, and long press and release where you would like to paste. Then select "paste". That should paste the text.
    If the text doesn't select within the browser, it might be an uncopyable format. Like if the text was within an image, naturally you would be unable to select it. The only thing to do there is long press the image and selecting "save image", adding it to your camera roll. Then you could insert the image within pages.

  • How to get the password of a password protected Excel Sheet using java/jxl

    Hi ,
    how to get the password of a password protected Excel Sheet using java / jxl program.
    plz any one help me .
    Ramesh P
    [email protected]

    If they've implemented the password system correctly there probably isn't a way of getting the password at all.

  • Password protect files and folders Creative Cloud Files

    I know this feature has been requested a number of times, but I'm just wondering if anyone knows whether or not the ability to password protect files and folders for sharing purposes is in the works? It appears to be a glaring omission to me, particularly as Adobe's vision for the Creative Cloud encompasses the corporate world, where security is obviously of great importance.
    Any news would be welcome.
    Best regards
    Liam

    Moving the discussion to File Hosting, Syncing, and Collaboration forum.
    Thanks,
    Atul Saini

  • Is there any way to set up an Airport Extreme that had been previously used in a password protected network and the password was not provided by the seller ?

    Background -
    My original Airport Extreme Base Station failed (would not connect to the modem). I purchased a similar, if not identical base station on eBay. Unfortunately, the purchased base station apparently was used in a password protected network. For what it is worth, my son gave me a Netgear wireless router, but it leaves a lot to be desired. For one thing, I use to keep the cable modem in the basement along with the Airport base station, with a printer connected to the USB port. The Netgear device does not have a USB port and also requires that the computer (in this case, the eMac) used to set up the network be connected to one of the ethernet ports. This meant I had to move the cable modem and router into my bedroom, a very undesirable situation. It then occurred to me that the original Airport base station Wi-Fi function might still work, and tested this hypothesis and sure enough, the Wi-Fi function does indeed work I currently have both base stations powered on, with my printer connected to the original. Both base stations appear under my Network icon, but neither Airport Utility 5.4.2 or Airport Administrator Utility 4.2 see either base station. I can select the original base station as my network, connect to the printer or even my other computers, but as soon as I try to select the new one, it asks for the password. I would like to somehow reset this base station and then redefine the network name and encryption.

    I would suggest that you perform a "soft" reset on the AirPort Extreme Base Station (AEBS) that you just got from eBay. This type of reset will temporarily (5 minutes) disable both the base station and wireless security passwords so that you can access it with the AIrPort Utility to make the necessary changes.

  • Printing a password protected PDF file using acroread from Unix?

    We installed v8.1.3 acroread on the server but we are unable to print a password protected PDF file from command line in Unix? <br /><br />cat  <passprotected>.PDF | /usr/bin/acroread -toPostScript | lp -dprinter<br /><br />we get the following error<br /><br />"lp: Error - stdin is empty, so no job has been sent."<br /><br />Please advice <br /><br />Thank you in advance.<br />MSUDHAN.

    Hello,<br /><br />If the pdf file has a doc open password or if printing is disallowed you will not be able to print it using the commandline.<br /><br />Any other pdf can be printed using the same command :<br />cat a.pdf | acroread -toPostScript | lp -d <printer><br /><br />Regards,<br /> Rishi

  • Is it possible to see how many times a component has been used in our websites?

    Hi,
    we currently have 3 websites running and I don't know if a component we created is actually in use.
    Is there a way to find this out?
    Thanks,
    Giulio

    Hi kasq,
    thanks for your quick answer...I tried
    path=/apps/mywebsite/components/scrollable/html.jsp
    and the result was
    XPath query
    /jcr:root/apps/upc-cablecom-ch/components/scrollable/html.jsp//*
    Filtering predicates
    Results
    Number of hits: 1
    Time: 0.16 seconds
    /apps/mywebsite/components/scrollable/html.jsp/jcr:content  (html,  json)
    So how do I have to read it? I see 1 number of hits, that I assume it's how many times it's used from other files...but how do I actually see how many times it's used on all our pages?
    Sorry for this newbie question, but only now I'm getting deeper in CQ5
    Thanks,
    G

  • My Mac got hacked. I was working on a word document when the computer suddenly started typing meaningful sentences on its own that describes how the hacker is skillful. At the that time I was on a password protected wifi and file sharing was off.

    This is the first time I get hacked this bad. I was working on a microsoft word document when the computer suddenly started typing meaningful sentences on its own that describes how skillfull the hacker is. At the that time I was on a friends wifi network that is password protected (not sure about the encyrption), the Os X Firewall was on. I was using the admin profile, however, file sharing was off. I'm very careful not to install any suspecious 3rd party software.
    So far I have verified permissions and fixed some errors there, and changed passwords.
    Do I have to erase/format my computer and reinstall the Os? If so is it adequte to use the internet recovery tool or will it use old and possibly infected EFI/Root files?
    Would appreciate the advice of all the Mac experts out there. Thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo launchctl getenv DYLD_INSERT_LIBRARIES; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; launchctl getenv DYLD_INSERT_LIBRARIES; echo; crontab -l 2> /dev/null; } | open -ef
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Acrobat XI Pro for OSX can't open password-protected pdfs created using Acrobat 9 Pro for Windows

    I am having problems opening password-protected files created on a PC using Acrobat 9 Pro.  I am running a MacBook Pro OSX 10.8.4 with Acrobat XI Pro.  When I attempt to enter the password when prompted, a dialogue box pops up saying that I've entered the incorrect password.  After many attempts, I am certain that the password entered is correct -- this is reinforced by the fact that i am able to open the same document using Mac's Preview software.
    Any assistance would be appreciated!
    Thanks.

    I was suddenly having the same problem in Acrobat XI Pro for Windows (recently upgraded to CC from Acrobat X).  For the past while I've sometimes had to use the "insert from file" tool to get a page added from another file.  I couldn't figure out why dragging sometimes would no longer work, but was too busy to go looking for a solution until tonight. 
    The solution was given by JoshTatum24 above. Switch from a scrolling page display to single page display.  Now I can drag pages between documents again.  THANK YOU Josh!
    Oh, and CORREAdmin,  it does not matter whether the hand or arrow selection tool is active, my mouse pointer is always an arrow when positioned in the page thumbnails panel.  Switching selection tools does not make a difference in dragging, but switching between scrolling and single page display definitely DOES make the difference.

  • How to set Password protection in excel using java

    Dear all,
    I have no idea to write a java program that how to set password protection in excel. Please give me some solution using java tools. Thank a lot!
    Regards,
    kzyo

    Dear Bamkin ,
    I used your code and paste it in my program. The error is as the follow:
    Code:
         stmnt = c.createStatement();
                   String query = "select StudentNumber, Email, New_Email_Address from [Sheet1$] where Len(New_Email_Address) > 0";
                   System.out.println(query);
                   rs = stmnt.executeQuery(query);
                   stmnt.executeUpdate("SET PASSWORD=PASSWORD('Test')");
    Error:
    (Remark: Invalid SQL statement)
    java.sql.SQLException: [Microsoft][ODBC Excel Driver] �����I SQL ���q���G�a����'DELETE'�A'INSERT'�A'PROCEDURE'�A'SELECT' �� 'UPDATE' �B
         at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6958)
         at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7115)
         at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3111)
         at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
         at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(JdbcOdbcStatement.java:288)
         at hk.gov.edb.util.ExcelHandle.updateNewEmail(ExcelHandle.java:414)
         at hk.gov.edb.core.AppMain.doUpdate(AppMain.java:369)
         at hk.gov.edb.core.AppMain$7.construct(AppMain.java:584)
         at hk.gov.edb.util.SwingWorker$2.run(SwingWorker.java:127)
         at java.lang.Thread.run(Thread.java:595)

  • Pirobox from our website does not want to open on Firefox, yet opens on all other available browsers?

    We have thumbnail images on our website, http://www.ecsst.org/, when clicking on the thumbnail image, the image is supposed to open in a larger screen using Pirobox, but the window is completely black with the following message: "There seems to be an Error: Close Pirobox".
    On all other browsers, the images open correctly with Pirobox. We would just like to know if there is a problem with Firefox running Pirobox?
    As this is demeaning for our site we would like an answer promptly.
    ECSST

    You can try basic steps like these in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Reminder needed: how to set password protection  for all uses of  computer

    It's been a long time coming, but I feel that I need to limit the access to all materials on a Mac running OS 9.2.
    Is there a simple way that I can password protect the whole computer?
    Thanks for your time - and stay cool!

    Hi, Bruce -
    Try using Multiple Users to do that. One of its features is password access to use any account.
    This will provide a moderate level of security - however, a knowledgeable person will have little trouble defeating it.

Maybe you are looking for

  • [Logical Standby] Which table/SQL caused paging-out

    We have a Primary-Logical DR configuration. Recently, it has a problem with the logical: it's continuously paging out data from some transactions: SELECT SUBSTR(name, 1, 40) AS NAME, SUBSTR(value,1,32) AS VALUE FROM GV$LOGSTDBY_STATS; number of prepa

  • My s930 won't charge. need help

    i've been using my s930 for 1,5 month when it suddenly wont charge anymore. the red light is on but it wont charge. it just stopped at 4 percent. i tried calibrating the battery but it still wont work. any suggestions? thank you for your time

  • N-step BADI approval SRM workflow

    Hi, I am implementing N-step approval badi for SC approval using header level workflow (WS14000133) in SRM 5.0. My requirement is to determine the financial analysts responsible for each line item and then the mangement approvers based on their appro

  • My airport express has stopped working as an extender.

    Aloha: I have been successfully using my my airport Express as an extender for several months when it just quit working.  I now have plugged it in right next to my computer and airport Extreme to trouble shoot. It just sits there blinking orange.  I

  • I can´t install itunes in my laptop

    i have it before, and it used to worked really good. i don´t know what happened..it started giving me an error, and finally stop working. Now i can´t install it any more. (i have win xp) Please, I need help