Password protection manager doesnt SHOWS UPmodel no. SAW1AGB3A0904A1 ..HD-E2

ON MY EXTERNAL HARD DRIVE password protection manager doesnt SHOWS UP ...model no. SAW1AGB3A0904A1 ..HD-E2

Hi nabam13,
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

Can't access Password Protection Manager on my External Hard Drive to unlock it

I can't access password protection manager on my External Hard Drive to unlock it , I got updated antivirus and I always use safely remove to remove the hard drive. I see the UNLOCK APP Drive, and the Public Area, but when I run the "Password Protection Manager.exe" file at UNLOCK APP Drive, the bar will just be fulfilled by approximately 60% by showing "Loading...", then it stops for many seconds, and it starts to run the Installation file (PasswordProtectionManagerSetup_F.exe) which will delete all unlocked files if I accept it to install.
2 TB External Hard Drive Model HD-E2
Model No.: OAW1AGK370300BF
201307
Please let me know how I can access my protected files (the locked drive).

Hi vahid22! Please provide the model number (usually on the bottom of the unit) of your Sony External Hard Drive. Thank you!

I can't access password protection manager on my External Hard Drive to unlock it

I can't access password protection manager on my External Hard Drive to unlock it , its kind of infected by a virus I guess and it is not bring me the password protection manage screen to enter password and access my data...
Solved!
Go to Solution.

Hi vahid22! Please provide the model number (usually on the bottom of the unit) of your Sony External Hard Drive. Thank you!

Startup manager doesnt show up after installing windows partition

I partitioned my imac and installed Windows.
After installation of Windows, It no more operates the options key. My computer starts automatically with Windows, and have no choice to switch between operating systems. it is impossible that i have formatted all disc since I am sure that I partitioned 700 gb of space for OSX, and 299 gb for Windows.
Why is this happening?

Hi lindaa_07,
The Startup Manager should show up when depressing the Option key on your keyboard no matter what operating system(s) is installed. One possibility comes to mind - is this an Apple keyboard and is it directly connected to the iMac? Some other keyboards may not function in a way that brings up the startup manager. See this article for reference -
Mac doesn't start up from disc - Apple Support
You may also wish to reset your iMac's NVRAM. See how to do this from this article -
How to Reset NVRAM on your Mac - Apple Support
Specifically -
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
Turn on your Mac.
Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
Hold these keys until the computer restarts and you hear the startup sound for a second time.
Release the keys.
After resetting NVRAM, you may need to reconfigure settings for speaker volume, screen resolution, startup disk selection, and time zone information.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Bootup manager doesnt show up?

Hello.
When I try all the commonds on the startup after the sound.
then nothing happens, option, c etc etc.
Im lucky sometimes to get a Apple logo after pressed one of the commands.
but most of the time i just got a white screen. and then nothing happens, before i hold X down to force start.
tryed with usb flash and extern cddrive to boot from.
Any suggestion ?

Hi lindaa_07,
The Startup Manager should show up when depressing the Option key on your keyboard no matter what operating system(s) is installed. One possibility comes to mind - is this an Apple keyboard and is it directly connected to the iMac? Some other keyboards may not function in a way that brings up the startup manager. See this article for reference -
Mac doesn't start up from disc - Apple Support
You may also wish to reset your iMac's NVRAM. See how to do this from this article -
How to Reset NVRAM on your Mac - Apple Support
Specifically -
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
Turn on your Mac.
Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
Hold these keys until the computer restarts and you hear the startup sound for a second time.
Release the keys.
After resetting NVRAM, you may need to reconfigure settings for speaker volume, screen resolution, startup disk selection, and time zone information.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Password protected but still showing up in Google search

I've had a family website for a couple of years, always using the "private" site setting in iWeb, complete with user name and password. I just discovered that all the site's subpages show up in a Google search. When I say they show up, I mean that they have all my kids' photos and names and everything I've been trying to protect with the "private" setting.
Can anyone walk me through fixing this problem ASAP?
Thanks.

I assume you are publishing to MobileMe so you should contact their tech support about this.....
http://www.apple.com/support/mobileme/ww/

Password protected alert to show OCG/layer

I love this code http://forums.adobe.com/message/3314067#3314067 that George came up with but haven't had any luck adapting it to my needs without strange errors occurring.
What I have is an 'admin' section on a hidden layer that works like a popup when a button is clicked. Really all I need to do is adapt this code to make it turn a layer (OCG) on, it doesn't need to turn on and off like George's code does.
I've fiddled with this code for hours but can't seem to nail it. What should I be doing?

The man himself. I have read through that tutorial George, I'm having problems with working your code out so I can replace the read only state change with an OCG state change.
Are you able to break down your code for me? It's not quite making sense to me yet.
Here's what I currently have:
    // Get one of the fields in the group
    var f = getField("private.field1");
    // Determine new readonly state, which
    // is the opposite of the current state
    var readonly = !(f.display=display.visible);
    var readonly_desc = readonly ? "deactivate" : "activate";
    // Ask user for password
    var resp = app.response({
        cQuestion: "To " + readonly_desc + " the fields, enter the password:",
        cTitle: "Enter password",
        bPassword: true,
        cLabel: "Password"
    switch (resp) {
    case "pass": // Your password goes here
getField("private").display = display.hidden;
        app.alert("The fields are now " + readonly_desc + "d.", 3);
        break;
    case null : // User pressed Cancel button
        break;
    default : // Incorrect password
        app.alert("Incorrect password.", 1);
        break;

Read a password protected miniSD with a memory car...

Hi!
I password protected a miniSD inserted in my Nokia N73; unfortunately, the phone broke and if I try to read the card with a memory card reader connected to the PC, I just can't see it, as nothing was inserted!
So, I wondered if there's a program to menage a memory card protected by a password, or to unlock it I must put it in a phone?
I remember the password, I just can't read the card!
I'm Winston Wolf, I solve problems

Unfourtunitely some card reader can't read password protected card and show no disk in dirive(H. You should insert the card to another mobile and should remove the password.

The 10.7.4 update doesnt show

I dont know why, but update manager doesnt show the 10.7.4 update for me, how come?
im on 10.7.3 mac mini, nothing special...

There's no update manager in Mac OS X, only Software Update. If that's not showing the update, then manually download the appropriate ones from http://support.apple.com/downloads/

Password-protected PDFs making mail blank view of messages?

Surreal problem that seems to have started about the same time as my 10.8.4 update (from 10.8.3):
Viewing the standard Mail view, with mailboxes on the left, message list for the selected mailbox in the middle, and message text in the largest pane on the right of the window; when moving through the list of messages, moving down and seeing the message texts to the right, all of a sudden, the preview pane to the right go BLANK. And I've narrowed it down to several suspect messages that came from a regular group of business contacts who send me reports as password-protected PDFs. I prepared a test PDF with Preview, encrypted, and used that to test the proposition that password-protected PDFs are what is 'breaking' the view of message contents in the right hand window, and it is clearly the problem.
After I view a message with the gray password-protected preview image showing in the preview pane, switching to another message in the message list, that next message shows a normal header but the text/body of the message shows blank. And then the next messages keep showing blank until I either: hide and unhide the main mail window OR quit and reopen mail. But double-clicking on any message in the list to open it properly in its own window shows it normally.
Rebuilding my mailboxes did not help. Rebooting did not help.
Any ideas about what the heck might be going on?

I've had the same problem on 3 computers since updating them to 10.8.4
I don't think many will find this thread as most will search for threads relating to 10.8.4
It only happens to my mail after viewing a message that contains a password protected pdf. If I don't open emails that contain the pdfs mail works perfectly, but once I've clicked on a message that contains a pdf every email turns blank. Mac mail & POP accounts. I can double-click the email to have it viewable in a new window but still can't open the pdfs. I get password protected pdfs regularly for work.
They're standard drives, no partitioning.
I've tried the "sandbox" suggestion with no joy. & I've also tried removing junk filtering which is a suggestion on another thread.
I don't think I'm up to re-installing 10.8.3 so I've been using a browser for emails.

SSO authtication doesnt show "invalid password" message

We have 2 SSO servers
In once, if the user enters invalid password, then same page comes up with message "invalid username/password"
This is the expected behaviour
In other, same page comes up, but without any message
This is misleading and the user keeps thinking why he is not able to proceed without realizing that the password was incorrect
I am sure this is related to some settings
But dont know what needs to be changed
Or what shall I compare bteween the server where its working fine as against the server, where it doesnt show up the right message
Please suggest

So, I assume then that your login page is ok. You tried it and it was there, but you are not being redirected to this page. Can you try re-registering your site using the SSO registration tool. For example:
e.g. for unix:
$ORACLE_HOME/sso/bin/ssoreg.sh \
-site_name application.oracle.com \
-host ukp16016.uk.oracle.com -port 1521 -sid iasdb \
-success_url http://application.oracle.com:7779/osso_login_success \
-cancel_url http://application.oracle.com:7779 \
-logout_url http://application.oracle.com:7779/osso_logout_success \
-home_url http://application.oracle.com:7779 \
-config_mod_osso TRUE \
-oracle_home_path $ORACLE_HOME \
-u root \
-sso_server_version v1.2 \
-verbose TRUE
e.g. for Windows (with no line breaks):
%ORACLE_HOME%\sso\bin\ssoreg.bat
-site_name application.oracle.com
-host ukp16016.uk.oracle.com -port 1521 -sid iasdb
-success_url http://application.oracle.com:7779/osso_login_success
-cancel_url http://application.oracle.com:7779
-logout_url http://application.oracle.com:7779/osso_logout_success
-home_url http://applicationk.oracle.com:7779
-config_mod_osso TRUE
-oracle_home_path %ORACLE_HOME%
-u system
-sso_server_version v1.2
-verbose TRUE
2. If this OHS should protect any URLs in addition to /oiddas edit the mod_osso.conf file at this point.
3. Then update the DCM repository for the appropriate Apache server:
Unix:
$ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct OHS -v
Windows:
%ORACLE_HOME%\dcm\bin\dcmctl updateconfig -ct OHS -v
4. Now restart the instance:
Unix:
$ORACLE_HOME/dcm/bin/dcmctl stop -v
$ORACLE_HOME/dcm/bin/dcmctl start -v
Windows:
%ORACLE_HOME%\dcm\bin\dcmctl stop -v
%ORACLE_HOME%\dcm\bin\dcmctl start -v
If you have metalink access, this is covered in Note:249408.1

How to show ipad application in itunes, but will only be assessable to owners, not the general public.Using lock code/password protected on iTunes

How to show ipad application in itunes, but will only be assessable to owners, not the general public by using lock code/password protected on iTunes

So if I understand you properly, I need to create EOs for all my list of values (which are based on views of Oracle apps tables) and base my VO on those EOs. And then I setup associations between these EOs and the Item EO. Then I include the these EOs in my Items VO and add the description attributes to my list of attributes. I had done this for the list of users, but for the views of Oracle I had just created read only VO. Sounds like that won't work if I want to display the description. I know what to do - I guess I was hoping there was a way to use the read only VO.
Thanks
Karen

Why do the new Tiles show password-protected content?

I updated to the new 33.1 version of firefox with the enhancements to the tiles displayed on a blank tab. I do not know if this behavior started prior to this update, or with it; just that my attention was drawn to it during the 33.1 tour.
Issue: Some of the tiles are displaying screenshots of pages that are password-protected. These are for sites that I am currently NOT LOGGED IN TO. Therefore, my expectation is that no protected data should be visible. This is not what is happening. An FTP site clearly shows filenames and data; my dropbox account shows the various folders, etc. Again, these are accounts I am signed out of, so there is no way firefox should have cached images of them.
In my opinion this is a serious security bug that needs addressed. In the meantime, any way I can disable this behavior?

Firefox captures thumbnails while you are viewing a site and caches those for later display on the new tab page. It is not doing a real-time login to your FTP site.
You can block sites from the new tab page if you do not want them there. When mousing over the tile, look for the "X" in the upper right corner.
To stop Firefox from capturing a thumbnail image of a site, currently, there is a preference you can add to completely stop Firefox from capturing thumbnails at all, but the bug filed to try to work out how to block sensitive sites selectively is still under discussion.
To use that global preference:
(1) Select and copy the following preference name: '''browser.pagethumbnails.capturing_disabled'''
(2) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(3) In the search box above the list, type or paste '''thumb''' and pause while the list is filtered. (This isn't strictly necessary, but makes it easier to see your change after you make it.)
(4) Right-click in the list area and choose New > Boolean. In the dialog asking for the preference name, paste the one you copied earlier and click OK. Given the choice between false and true, choose true to disable capturing of thumbnails and then click OK.
This is not retroactive, so Firefox still will have copies of your previously captured thumbnails. I'm sure there is a way to clear those, but I'd have to research it.
Regarding the bug report I mentioned: [https://bugzilla.mozilla.org/show_bug.cgi?id=755996 755996 – [New Tab Page] shows sensitive information in the thumbnails]. See also: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html Bugzilla Etiquette], [https://bugzilla.mozilla.org/page.cgi?id=voting.html Voting].

Why does the new version of Firefox not integrate with Norton 360 Identity Safe. Problem for me because I use Norton 360 Identity Safe to manage my passwords and make it more difficult to use password protected website without that add-in.

I use Norton 360 Identity Safe to manage my passwords and it makes it difficult to use password protected website without that add-in.

Norton release Firefox 8 compatibility already, instruction are here
* http://community.norton.com/t5/Norton-360/Firefox-8-Support-for-Norton-Toolbar/td-p/581640

E Mailed Zip Files showing up as Password Protected

I export photos to a folder, create zip file, and then e mail them as a regular part of my business. Sometimes these show up to the recipient as a "Password Protected" file. Any idea why???

None, but I reckon that's either Mail or an OS X issue for your version of the Operating System. So I would post on one of those forums.
Regards
TD

Password protection manager doesnt SHOWS UPmodel no. SAW1AGB3A0904A1 ..HD-E2

Similar Messages

Maybe you are looking for