Password recovery spanning two systems

I'm trying to find a solution that does not involve recoding native sap code to save upgrade frustrations etc.
Is it possible to have IDM's Password Recovery feature reset the password and unlock a user in system A, and then also unlock the same user in system B,C,D..+N and send that new password from system A to the users email address in system B?
The users donu2019t care what their password is in systems B...N+ as they are using netweaver portal for SSO, but they need the password emailed to them with their registered email in system B. So... reset password in A and send email to address in system B and unlock them in the other systems... is it possible?

John,
Take a look at these:
[SAP NetWeaver Identity Management Identity Center Implementation Guide: Self-Service Password Reset|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d69428-cc00-2c10-9ca5-b4f607bbbddf]
[Identity Center - Active Directory Password Hook|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c03f2fd2-4af7-2a10-f1b7-cfeb075ee240]
Hope this helps,
Matt

Similar Messages

Building approval workflow that spans two system

Hi,
We are on oracle apps 11i.
There is a requirement to build a workflow that spans oracle purchasing and another procurement system for PR.
After purchase requisition is handled in the system it should be forwarded to the other procurement system.
the procurement manger would either approve the purchase request and continue with the cycle in the external system or reject and send it back to oracle for modification.
this is how i see the solution so far:
-enter employee name and relevant position that refers to the manager in the external procurement system
-add position to existing position hierarchy
- when PR is sent in hierarchy to above manager, a database trigger can run to send the data to external system
till this point,please advise if there is a more appropriate solution
for the inbound data, how should i update the workflow? What are the APIs that i can use to reject the PR and send it back to requester for modification? if approved, how to handle the PR workflow in Oracle? How to stop the buyer from autocreating a PO automatically from PR?
regards

Hi,
"Approval workflow is ambiguous. Inform system administrator"
This error comes when you have more than one workflow active and your start conditions has a conflict. ( means you have same conditions for both the active workflows)
Go to SWETYPV and find out your active workflows for the Business object BUS2121 and deactivate the one if both are not required. Select on the active workflow and go to details where you will find this FM SWB_2_CHECK_FB_START_COND_EVAL. If this FM exists then there is a start condition for your active workflow.
Then go to SWB_PROCUREMENT or SWB_COND and select your BOR as EC Requirement Coverage Request and findout the active start conditions for both of your active workflows. Analyse and if there is a conflict change it.
If you dont have start conditions for both the WFs then create for one with the create tab in SWB_COND.
Let me know if you need any further inputs.
Best regards,
Sridhar.

Elitebook 8530 sparekey problem after password recovery

Hi,
I'm a bit panicking - but will try to make this lucid.
I very much hope you guys can help..
It's the continuation of a problem I asked yesterday somewhere else.
http://forums.techguy.org/windows-vista/1133738-check-after-password-recovery.html
Basic system information:
EliteBook 8530; runs on Vista Business. More details about system in above thread
But for a short run-down:
- Yesterday my user-password was not accepted.
- Still had admin-access via fingerprints
- Ran Malbytes anti-malware and AVG anti-virus - neither found much of anything.
- Made new admin account, used that to reset my password.
- Posted the above-mentioned topic whether someone could check for malicious processes.
- Yesterday evening shut down the computer as normal
- This morning it mentioned that recently a password had been reset [with some location I didn't know. Had my name in it twice, so perhaps root-password or something?
- Only option was to click 'OK' and enter HP Sparekey.
- Currently I have the following message: Some users have not enrolled for HP SpareKey recovery. Do you want to enroll now? Answer-options: Yes; No; Do not show again.
I don't know the implications or effects of any of them - so haven't done anything yet.
Note: I don't think any of the accounts have HP SpareKey enrolled. I have never seen about it previously.
However, I got my laptop via an university-program, so the operating systems etc. had been preinstalled.
It might be possible they installed ShareKey for the initial account - but I think I would've heard of that.
So please someone help me - I really don't know what to do..
This question was solved.
View Solution.

Hey guys,
I don't want to hurry you or anything - but I could really need some advice here
Or should I be in a difference forum part; like http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/bd-p/bsc-274 or http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.VBnV4lJIg1g
because it's an issue with an EliteBook?
Or don't you guys really know this particular problem either - and therefore can't advice?..

LMS 4.2.1 password recovery system administrator ADE-OS

Hi,
How is-it possible to do a recovery password for sysadmin on ADE-OS ?
We're using LMS 4.2.1 and my customer doesn't remember the username and password created during installation.
We have the admin user for the https connection.
Thanks,
Jeff

keep in mind that there is CSCtx08080
see the Release Notes of LMS 4.2.1 :
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2.1/readme/lms_421_readme.html#wp1205822
but it is resolved in LMS 4.2.2
=====================================
CSCtx08080 Bug Details
"Password recovery" option not working in Virtual appliance
Symptom:
"Password Recovery" option is not working in Virtual Appliance.
Conditions:
"Password Recovery" option is not working as expected.
When the ISO image is mounted and the option "Recover administrator password" is chosen for
password recovery, an error message"Failed to mount drive partition" appears instead of the password recovery window.
Status Status
Fixed
(Verified)
Severity Severity
4 - minor
Last Modified Last Modified
In Last 2 weeks
Product Product
CiscoWorks LMS Portal
Technology Technology
1st Found-In 1st Found-in
4.2
Fixed-In Fixed-in
4.2(2)
Workaround:
None.

6509 - 720 Supervisor Module Failure after Password Recovery

Hi,
I attempted to perform a password recovery on a 6509 with dual WS-SUP720-3B modules running 12.2(33)SXI2A.
After changing the configuration register to 0x2142 and booting, I am getting a major error on the supervisor modules. I've changed the configuration register back to 0x2102 and am still getting the same error on both supervisor modules. I've also tried it with one module removed and one module installed.
I have about 30 seconds in where I can run commands before I get booted to rommon.
Any thoughts?
See below for the console output:
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot bootdisk:"
Initializing ATA monitor library...
string is bootdisk:s72033-ipservicesk9-mz.122-33.SXI2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x4224F120
*Apr 19 05:03:02.747: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Apr 19 05:03:01.515: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch
Firmware compiled 19-May-09 12:08 by apyu Build [25600]
*Apr 19 05:03:02.747: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
Download Start
Download Completed! Booting the image.
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################ [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x43A51E70
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMC133600GT
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
194 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c)
Router> 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WAen
Router#TCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Router#
Router#Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
Router#
Router#
Router#
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
Router#
Router#
Router#
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
Router#
Router#
Router#
Router#show diagnostic result
% Incomplete command.
Router#show diagnostic result ?
module Module Keyword
Router#show diagnostic result ,modu modjle ule 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More-- U U
5) TestLoopback:
Port 1 2
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> .
11) TestFibDevices ------------------> F
12) TestIPv4FibShortcut -------------> F
13) TestL3Capture2 ------------------> F
14) TestIPv6FibShortcut -------------> F
15) TestMPLSFibShortcut -------------> F
16) TestNATFibShortcut --------------> F
17) TestAclPermit -------------------> F
18) TestAclDeny ---------------------> U
--More-- 19) TestQoSTcam ---------------------> U
20) TestL3VlanMet -------------------> U
21) TestIngressSpan -----------------> U
22) TestEgressSpan ------------------> U
23) TestNetflowInlineRewrite:
Port 1 2
U U
24) TestFabricSnakeForward ----------> U
25) TestFabricSnakeBackward ---------> U
26) TestTrafficStress ---------------> U
27) TestFibTcamSSRAM ----------------> U
28) TestAsicMemory ------------------> U
29) TestAclQosTcam ------------------> U
30) TestNetflowTcam -----------------> U
31) ScheduleSwitchover --------------> U
32) TestFirmwareDiagStatus ----------> U
33) TestAsicSync --------------------> U
34) TestUnusedPortLoopback:
--More--
Router#[Ashow diagnostic result module 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More--
Router#
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: M
%Software-forced reload
04:56:30 UTC Sun Apr 19 2015: Breakpoint exception, CPU signal 23, PC = 0x42735338
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 42735338 42732E8C 423A6220 423A624C 421C1388 4223F614 4223F670 40962164 40963034 40962F54 40963D28 423259D0 42319604 42319820 42727FEC
$0 : 00000000, AT : 43FE0000, v0 : 45870000, v1 : 00000200
a0 : 46DC99C0, a1 : 44E05758, a2 : 00000000, a3 : 00000040
t0 : 00000010, t1 : 3400F101, t2 : 3400F100, t3 : FFFF00FF
t4 : 42728608, t5 : 00002F04, t6 : 80000000, t7 : 00000000
s0 : 00000000, s1 : 43EE0000, s2 : 50449158, s3 : 0000001F
s4 : 50449158, s5 : 470B3AB4, s6 : 00000000, s7 : 08A5DFC8
t8 : 08028FEC, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 43FDDE8C, sp : 5000DBB0, s8 : 00000000, ra : 42732E8C
EPC : 42735338, ErrorEPC : 870FDDF0, SREG : 3400F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x43A51E70
Cause 00000824 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20150419-045630
=== Flushing messages (04:56:30 UTC Sun Apr 19 2015) ===
Buffered messages:
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WATCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
*Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: Module 5: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestFibDevices failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv4FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestL3Capture2 failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
Queued messages:
*Apr 19 04:56:33.583: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
IPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
*Apr 19 04:56:29.971: %HA_EM-6-LOG: Mandatory.go_bootup.tcl: GOLD EEM TCL policy for boot up diagnostic
*Apr 19 04:56:30.575: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [5/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x45876f54
PC = 0x42728664, SP = 0x43ed9cd8, RA = 0x413ad2f4
Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 >

What kind of line card was being inserted in slot 6? Have you tried other slots? The crash file in the RP says it was reset by SP, so the important crashinfo file would be in the sup-bootflash: Try an see if you find any "dir sup-bootflash:"
Aug 5 17:46:11: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
%Software-forced reload
To answer your question:
A Is there any different procedure to install line modules in supervisor slots?
>>No there are no special configuration you need to do when inserting a line card in slots that normally would be for supervisor.
B Switch is having previously removed linecard (i.e, fastethernet module)in running configuration. Will it create any system crash?
>>No, it will not cause the switch to crash, when you see the configuration of a line card even after it was removed is quite normal, it's cold module provisionsing, you would not want to keep putting in a configuration for any line card after just resetaing them do you?

Cisco 3945 password recovery

I observed two cisco 3945 routers lose IOS during password recovery. Router was rebooted, break sequence ctrl-break, then boot(instead of reset) issued. The router booted to its existing configuration or password recovery failed and router was power cycled again then ctrl-break issued. However this time the IOS was gone and all flash file systems were blank! It happened on two routers. Anyone know why such an anomaly would occur or has anyone witnessed such?

config register was set to confreg 0X2142 first time password recovery was attempted. It took but only after the power cycle(not when I simply typed boot) but by then the IOS images were gone. I found that very disturbing when it happened on two different routers and I never saw such a thing happen to a router before.

Blackberry ID - forgot password, forgot password recovery info, exceeded login attempts, why can't BB send me email to reset password.

THE ISSUES ARE:
1. FORGOT PASSWORD
2. FORGOT PASSWORD RECOVERY INFO
3. EXCEEDED ATTEMPTS TO LOGIN
I HAVE READ OTHER PEOPLES FORUM PROBLEMS THAT ARE THE SAME. WHEN I FOLLOWED LINKS THAT SUPPORT GAVE THERE IS NO SOLUTION TO ACTUALLY FIX THE PROBLEM.
What I need is simply this: Blackberry to send me a RESET PASSWORD link to the email I have registered with Blackberry WITHOUT HAVING TO PROVIDE PASSWORD RECOVERY INFO. This will enable me to bypass unknown recovery password info and access my Blackberry ID account.
Why haven't I been able to find a solution to fix the problem?
BECAUSE IT DOESN'T APPEAR TO EXIST........ ANYWHERE..... EVEN ON YOUTUBE BLACKBERRY ARE RUNNING AN OUT OF DATE SOLUTION CENTRE.
When looked online to Blackberry youtube video it shows a solution that doesn't exist! WHY? BECAUSE IT WAS UPLOADED IN 2011. DUH. http://www.youtube.com/watch?v=lvdRb4qNG1M
If I can't remember my password or recovery password info there is NO other option available that will send me a reset password via email so I can keep my current BB ID.
KB34776 - does not apply because you HAVE TO BE ABLE TO REMEMBER YOUR RECOVERY PASSWORD!
CHECKED THIS OUT...
Workaround
If the BlackBerry ID password has been forgotten but the answer to the password recovery question is known, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
If the BlackBerry smartphone user knows the email address used for the BlackBerry ID login but is unable to remember the associated password then it is possible to reset the password using the steps below:
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.
To see if a BlackBerry ID account is confirmed, log in to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow KB34137.
Browse to the following URL using a desktop browser, the BlackBerry Browser on the BlackBerry smartphone, or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will be displayed A password reset email has been sent to [email protected], at which point, a reset email will be delivered to the associated email address inbox.
Log in to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the smartphone, or the Browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected]. If the email is not found in the inbox, check the mailbox's Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
If the BlackBerry smartphone user does not know the email or password that was used for the BlackBerry ID, the BlackBerry ID will be locked out after 10 unsuccessful login attempts. See KB24157 for BlackBerry ID lockout behavior.
THEN CHECKED KB24157......
Overview
BlackBerry ID is the master key to BlackBerry smartphone products, sites, services and applications, including BlackBerry Protect and the BlackBerry App World storefront.
To prevent unauthorized access to the account, the BlackBerry ID will become locked out after a number of failed attempts. See the information below for an outline on the expected behavior:
Local Authentication Lockout
On BlackBerry PlayBook and BlackBerry smartphones if the user enters their BBID password incorrectly 10 times on the BBID sign in screen, verify password screen, or BBID Edit screens, they are LOCKED OUT of all the following functions on that BlackBerry device for 15 minutes:
Authenticating with their BlackBerry ID on the sign in screen
Authenticating with their BlackBerry ID on the verify password screen
Authenticating with their BlackBerry ID on the BBID edit screens
Note: The user can still log in on the web or any other devices associated with their BlackBerry ID. They are only locked out on the device where the 10 incorrect attempts occurred. On the locked out device, after 15 minutes, they get 1 try to provide the correct password on the sign in and/or verify password screens. If they fail to enter the correct password, they are locked out for an additional 15 minutes on that device.
Account Server Lockout
Users have total of 10 attempts to enter their password correctly against the BlackBerry ID Account Server.
The scenarios that increment the Account Server lockout counter are as follows:
Providing an incorrect password anywhere on the BlackBerry ID web portal (blackberry.com/blackberryid)
Providing an incorrect password within the BlackBerry ID Edit feature on any BlackBerry device or BlackBerry PlayBook
Note: if a user provides an incorrect password 5 times on the BlackBerry ID web portal (blackberry.com/blackberryid), and then 5 more times on the BlackBerry ID Edit feature on their BlackBerry PlayBook, the cumulative number of failed attempts is 10. Once the user has made 10 incorrect attempts to provide their password against the Account Server, they are locked out of the Account Server PERMANENTLY until they reset their password.
See KB26361 for information to reset a BlackBerry ID password
Note: The Account Server Lockout does NOT prevent the user from local authenticating on devices (the user can still authenticate on the sign in and verify password screens on their BlackBerry devices).
Forgot Password Lockout
If the user answers their Security Question incorrectly 10 times, they are locked out for 15 minutes of Forgot Password functionality on all interfaces such as:
BlackBerry website (blackberry.com/blackberryid)
BlackBerry PlayBook
BlackBerry smartphone
Note: After 15 minutes, they get 1 try, and if they fail to answer the question correctly, they are locked out for an additional 15 minutes.
THAT DIDN'T WORK SO NOW ITS BACK TO..... KB26361
Overview
To change the BlackBerry ID password, complete the steps below for the specific device:
From the BlackBerry 10 smartphone:
Swipe down from the top bezel on the home screen and select Settings.
Scroll down and select BlackBerry ID.
Select Change Password.
Enter the current password in the Current BlackBerry ID Password field.
Enter the new password in the New BlackBerry ID Password and Confirm New Passwordfields.
Select Submit to complete the password change.
To confirm the change You have changed your password will be displayed.
Also, if the BlackBerry ID password has been forgotten, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
Note: When using the recovery question password reset method, the generated email will be delivered to the BlackBerry 10 smartphone if the BlackBerry ID email address has been setup via Settings >Accounts
From a computer:
Visit http://www.bbid.com/ from a PC or BlackBerry smartphone browser.
Click Log in.
Enter the BlackBerry ID Username (email address) and password, then click Sign In.
Click Account Details.
Next to Password, click Edit.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Save.
Click Done to exit from the BlackBerry ID account information screens.
From the BlackBerry smartphone running BlackBerry 6:
Navigate to Options > Third Party Applications > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK.
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry smartphone running BlackBerry 7:
Navigate to Options > Device > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK .
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry Playbook tablet:
Navigate to the Options icon.
Select BlackBerry ID.
Click on the Edit button next to Change Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Submit.
A confirmation message will display You have changed your password.
Click OK.
If the password for a BlackBerry ID account has been forgotten and the login is unsuccessful, use the following process to reset the password.
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.  To see if a BlackBerry ID account is confirmed, login to the BlackBerry ID account, select Account Details and locate the Email Status field.  For instructions on confirming the BlackBerry ID account follow  KB34137.
To generate a password reset email, complete the following:
Browse to the following URL using a desktop browser, the Browser on the BlackBerry smartphone or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK. (Answering the recovery question is only required if the BlackBerry ID account is not confirmed)
A confirmation message will be displayed A password reset email has been sent to [email protected] , at which point, a reset email will be delivered to the associated email address inbox.
Login to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the BlackBerry smartphone or the browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected] If the email is not found in the inbox, check the Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
Note: If the BlackBerry ID email address is a BlackBerry mail address (e.g. <username>@tmo.blackberry.net), the BlackBerry ID password reset email will not be received on the BlackBerry smartphone. Since the BlackBerry mail address is not accessible from a computer, the steps outlined in KB28111 will need to be performed.
IT ALL LEADS BACK TO THE SAME UNHELPFUL NON-SOLUTION OF USE THE PASSWORD RECOVERY QUESTION....
Can the tech department of Blackberry please sort out this ridiculous unhelpful system by sending customers a direct email if password is forgotten so they can reset without having to go through the above without finding a solution.
THANK YOU.

Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
That said, it sounds like you have exhausted all of the automatic recovery methods...but just in case, please see this "sticky" post for helpful information concerning your BBID situation:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Hopefully, this information will be of use to you.
But do please keep in mind that security is a 2-way street...the human element play an equal part in that security, and you have failed at that in this situation, yet desire for the automated methods to still recover for you. Such just isn't possible, because your failure has exceeded the capabilities of the automated methods.
Hence, you likely need human intervention from an actual BB representative, which is not available in this forum (as discussed in the first link I gave you above). But, the methods to attempt to seek human intervention are posted within the 2nd link I gave you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

My safari keeps crashing because of a bat password recovery plug in. What do I do to fix it?

My safari keeps crashing on me, and when it does it always says it was because of some Bat! Password Recovery Plugin. How can I fix this and stop t from happening?

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update (if Java is already installed) or the Flashback malware removal tool (if Java is not installed under Lion), as well as any other available updates. Installing either of those items should clear the infection in most cases. No other action is required on your part. You must update to the latest version of Mac OS X 10.6 or 10.7 before you can install the Java update.
Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Do this after you’ve secured your system, not before.

Hp password recovery in windows 8

I just wanted to tell you of a recent experience I had when contacting HP support
I called them yesterday with what I considered to be a simple question I found out that this question in their eyes was not that simple
the question was how do I set Up a password recovery flash drive in Windows 8.
the the person from HP said that he would need to check and would I please give him a minute to do so, when he came back he said that hp computers did not have this option.
I said to him how could this be as windows 8 says you can do this I also said that in windows vista and windows 7 you could do this and Why Would windows 8 Be any different he said he didn't know But this was not an option available hp in windows 8 he also stated
if I were to forget my password would be to install my operating system again. I said to him that it seemed unreasonable that I would have to reinstall my os just to recover my password and the must be a simpler option than that. he said no that would be my only option if I were to ever forget my password. I then said to him I did not believe the information he was giving me was accurate and was he 100% sure of the information he was giving me, he said yes and that he would send me an e-mail giving me step by step instructions. I said okay bye, I did not believe what he was telling me so I went online and found out in about 2 minutes all we needed to do was set this up via the settings screen and user account where it give you the option to make a password recovery usb flash drive I understand that they cannot possibly know everything but I feel if they don't know they should be willing to tell you that they don't know and passed you on to someone who does rather Than making you spend hours reinstalling an operating system that you don't need to. it also seems to me outsourcing technical support to third world countries like in this case india where they may not have a full grasp of some of the finer subtletys of the english language and company like hp dell toshiba and many others need to return technical support to the countrys in which the computers are sold and 1 other thing why is it that we no longer get a set of recovery cds with new computer and have to make a set ourselves when so often in the process of making them some write error happens and you only find out that is there is a problem with them when you come to use them I know companies need to make a profit on the sale of the computers but surely there is enough profit margin for them still to supplie you with the recovery media you need

Hi,
I afraid the pritner is not supported on Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03457812&tmp_task=prodinfoCategory&cc=us&dlc=en...
You will not be able to use any other alternative driver with the printer as there are no drivers to allow the PC to communicate with the printer through a USB connection..
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to pull e-mail, password recovery phrase and password recovery answer f

Hi all,
I am very new to HR ABAP and have some basic doubts in ABAP HR.
I need to pull login which is like an e-mail id, password recovery phrase and Password Recovery Answer.
Can some one guide me from where or from which table or which info type should i pick these values and how.
Regards,
Jessica Sam.

Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support explains the difference between Alternate and Rescue Addresses and the "necessity" for a Rescue Address.
I fall into the category of not needing one (only two security questions in the challenge), so my "Forgot your answers?" link to send the email sends to my ALTERNATE address.
I do not know the criteria for 2 or 3 security questions.
ÇÇÇ

Enable password recovery in cisco 2950 with AAA

Hello friends,
I need to reccover switch enable password, i have already configured AAA also, when i am tryig to follow below proceedure finally saying Authorization failed. how can i recover enable password,
Regards,
Haris
If I try to recover password like this description says
http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swtrbl.html#wp1090048
Step 1 Connect a terminal or PC with terminal-emulation software to the switch console port.
Step 2 Set the line speed on the emulation software to 9600 baud.
Step 3 Power off the switch. Reconnect the power cord to the switch and, within 15 seconds, press the Mode button while the System LED is still flashing green.
Base ethernet MAC Address: 00:0x:xx:xx:xx:xx
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
load_helper
boot
switch:
Step 4 switch: flash_init
Initializing Flash...
flashfs[0]: 600 files, 19 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 7713792
flashfs[0]: Bytes available: 24800256
flashfs[0]: flashfs fsck took 10 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
Setting console baud rate to 9600...
Step5 switch:load_helper
Step6 switch: dir flash:
Directory of flash:/
2 -rwx 916 <date> vlan.dat
5 drwx 192 <date> c2960-lanbase-mz.122-25.SEE1
620 -rwx 5488 <date> config.text
621 -rwx 5 <date> private-config.text
24800256 bytes available (7713792 bytes used)
Step7 switch: rename flash:config.text flash:config.text.old
Step8 switch: boot
Loading "flash:c2960-lanbase-mz.122-25.SEE1/c2960-lanbase-mz.122-25.SEE1.bin"...
Initializing flashfs...
flashfs[1]: 600 files, 19 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 7713792
flashfs[1]: Bytes available: 24800256
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:0x:xx:xx:xx:xx
Motherboard assembly number : xxxxxxxxxx
Power supply part number : xxxxxxxxxxx
Motherboard serial number : xxxxxxxxxxx
Power supply serial number : xxxxxxxxxxx
Model revision number : B0
Motherboard revision number : B0
Model number : WS-C2960G-24TC-L
System serial number : xxxxxxxxxxxx
Top Assembly Part Number : xxxxxxxxxxxx
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : xxxxxxxxxxxxx
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 24 WS-C2960G-24TC-L 12.2(25)SEE1 C2960-LANBASE-M
Press RETURN to get started!
Step9 Hit <Enter>
Would you like to terminate autoinstall? [yes]: yes
Step10
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]no
Switch>
Step11 Switch> enable
Step12 Switch# rename flash:config.text.old flash:config.text
Destination filename [config.text]? <Enter>
Step13 Switch# copy flash:config.text system:running-config
Destination filename [running-config]?<Enter>
5488 bytes copied in 0.940 secs (5838 bytes/sec)
Step14 NewSwitchName#conf t
% Authorization failed.
Doesn't this procedure work any more ?

The password recovery worked, but you copied your problematic config back to the switch. Skip Step 13 and paste only the working part of the config to the switch.
You can see your renamed config with "more flash:config.text.old".

Compaq Mini 731ET Bilgisayar bios password recovery.

Compaq Mini 731ET Bilgisayar
win xp profesional
bios password recovery error code : CNU917049D
Please help....
THANK YOU....
This question was solved.
View Solution.

Neamsy try.
e9lo3o74ha
3rd letter lowercase L.
4th letter lowercase O.
6th letter lowercase O.
Use that code to go into the BIOS.
Disable all passwords that are enabled.
If asked for the CURRENT password use that code.
If asked for NEW password just hit enter.
If asked to VERIFY password just hit enter.
Save and exit.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Password Recovery error

Hello
I am trying to recover a password for a user which exists on my site , www.yourskinclinic.com.au. The site is hosted on the webmarketing plan.
I have had to use the old interface to manage users. I have sent a password recovery email to that user's email address. When I click on the link in that user's password recovery email, I am directed to a web page with that user's email address and 2 text boxes.
The 2 text boxes are " new password " and " Re-enter new password"
After entering a new password I get the following error message:-
"ERROR: This user is not registered for the selected site [ERROR 4]."
However the user is registered for that site.
There was also a message in one the attempts to reset that mentioned a 7 day minimum gap in resetting the password.
Should I delete that user and set the user up again, or are there any other suggestions?

Hey there.
Sounds like a known bug I have passé on to the team for example.
An error can occur here because you ver likely got two or more customers with the same username and thus this falls over. Gets confused.
If your not using emails as usernames you should look to do so. Change this users username to their email and then try. Working?

Old 1760 With password recovery disabled, no way to factory reset

Hi
I have an old 1760 router with Password Recovery Functionality Disabled
I don't care about its actual configuration , I need factory reset
I Followed the well documented procedure :
Normal boot
Self decompressing the image : #################################################
################################################################ [OK]
Smart Init is disabled. IOMEM set to: 15
PMem allocated: 57042944 bytes; IOMem allocated: 10065920 bytes
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-SV8Y7-M), Version 12.3(6d), RELEASE SOFTWARE (fc1
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 15-Oct-04 03:46 by kellythw
Image text-base: 0x80008120, data-base: 0x81440804
Send break at this time , then :
Do you want to reset the router to factory default
configuration and proceed [y/n] ? y
Reset router configuration to factory default.
cisco 1760 (MPC860P) processor (revision 0x500) with 55706K/9830K bytes of memor
y.
Processor board ID FOC07450X9P (3881152211), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
WARNING:
Executing this command will disable password recovery mechanism.
Do not execute this command without another plan for
password recovery.
Are you sure you want to continue? [yes/no]: y
The router boot up normally anyway , still with original password unrecovered instead a fresh factory default.
Any hint please ?????
Thank you

Federico,
There is something quite strange going on but one thing has caught my attention in particular. This is a part of your transcript:
Send break at this time , then :
Do you want to reset the router to factory default configuration and proceed [y/n] ? y Reset router configuration to factory default.cisco 1760 (MPC860P) processor (revision 0x500) with 55706K/9830K bytes of memory.Processor board ID FOC07450X9P (3881152211), with hardware revision 0000MPC860P processor: part number 5, mask 2Bridging software.X.25 software, Version 3.0.0.1 FastEthernet/IEEE 802.3 interface(s)32K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write)WARNING:Executing this command will disable password recovery mechanism.Do not execute this command without another plan forpassword recovery.Are you sure you want to continue? [yes/no]: y
Notice that the first question is whether you want to erase the configuration - you respond with yes, and the router continues booting. The second question displayed clearly shows that the router continues loading the configuration file and in particular processes the no service password-recovery command.
What would happen if you answered with n to this second question, preventing the router from accepting the no password-recovery stored command? Could you reload the router afterwards and try the password recovery procedure again?
Also, if this router has a removable Flash card, would you be able to enter the ROMMON and set the configuration register to 0x2142 if you removed the card and tried booting the router?
Best regards,
Peter

Password Recovery on UC540

Hi All
Our service provider has left and we need to make urgent changes to the UC - does anyone know the admin password recovery for the US540 ?

Hi Nuno,
You will need CLI access to the UC540 for this. I'm assuming that it has a password, and that you don't know what it is. If you have the password, skip password recovery step.
First, to recover/set a new password, during boot you need to send a break within 60 seconds which will take you to Rommon.
At Rommon 1> type confreg 0x2142
At Rommon 2> type reset. Type no after each set up question.
When it boots, you'll want to erase cue (voicemail) first. Session into CUE with: service-module integrated-service-engine 0/0 session and hit enter twice. Type offline, then y when asked to confirm. Type restore factory default, and again y when asked to confirm, and press enter to reload. It can take 5-10 mins, and you will know its complete when it says system online.
Then to factory default the UC/CME, type exit to get out of CUE. At the prompt (which should still end in a #, if not, type enable to go from > to #) type show flash: Show more, and probably down at the bottom of the list you'll see something like UC540-xxxxxxx-k9-FACTORY-xxx-.cfg This is the factory config file (don't save to it!) Make note of this filename, I will refer to it as (but make sure you include the name and .cfg). Type copy flash: startup. Reboot, you should be running with a factory defaulted UC540.
Best,
Charles
Please rate helpful posts.
Source: https://supportforums.cisco.com/thread/2157974
Lost password go to http://www.recoverlostpassword.com

Password recovery spanning two systems

Similar Messages

Maybe you are looking for