Password Requests for Safari and Entourage

I've been through several forums this week trying to resolve iMac challenges. After all of those fixes were incorporated or tried, I now see dialogue boxes in Safari asking for my keychain password as well as in Entourage. Do I need to change a setting someplace, or is this just to be expected from now on?

OK; too simply stated. I did find pop.charter.net as an Internet password. I clicked on the "i" and another window with two selections appeared: Attributes//Access Control. When I select Access Control, the new window shows only one button clicked that says, "*Confirm before allowing access*." The sub-level button, saying "Ask for keychain password," is not clicked. Nor is the upper level button, saying "Allow all applications to access this item." In the lower window it says, "Always allow access by...Entourage...." What should I do about this? Do I need to change it, delete it or just punt?

Similar Messages

  • How to enable password request for restart and shutdown?

    Hi,
    I'm neither a Linux nor an Arch Linux newbie, but inexperienced regarding this particular issue.
    I want to enable password request for restart and shutdown and want to know if I'm mistaken, because trial and error might become to time-consuming while working on a project.
    I read https://wiki.archlinux.org/index.php/Al … o_shutdown.
    $ ls -hAl /usr/bin/shutdown
    lrwxrwxrwx 1 root root 9 Apr 22 03:02 /usr/bin/shutdown -> systemctl
    If I try to run $ shutdown -hP 28 or $ shutdown -c nothings happens, I need to run $ sudo shutdown -hP 28 and $ sudo shutdown -c and type a password. That's the way I want it.
    If I e.g. run $ shutdown -r now no password is needed. I want to disable this. It should behave the same way as shutdown -hP/-c behave. I want to type
    $ sudo shutdown -r now or $ sudo systemctl reboot etc. and then the password should be required.
    $ sudo grep -vn "#" /etc/sudoers | grep [[:blank:]]
    72:root ALL=(ALL) ALL
    73:rocketmouse ALL=(ALL) ALL
    The user "rocketmouse" should have all permissions after typing a password, but not without typing the password.
    IIUC what's written at https://wiki.archlinux.org/index.php/Polkit, I need to edit
    $ pkaction | grep login
    org.freedesktop.accounts.set-login-option
    org.freedesktop.login1.attach-device
    org.freedesktop.login1.flush-devices
    org.freedesktop.login1.hibernate
    org.freedesktop.login1.hibernate-ignore-inhibit
    org.freedesktop.login1.hibernate-multiple-sessions
    org.freedesktop.login1.inhibit-block-idle
    org.freedesktop.login1.inhibit-block-shutdown
    org.freedesktop.login1.inhibit-block-sleep
    org.freedesktop.login1.inhibit-delay-shutdown
    org.freedesktop.login1.inhibit-delay-sleep
    org.freedesktop.login1.inhibit-handle-hibernate-key
    org.freedesktop.login1.inhibit-handle-lid-switch
    org.freedesktop.login1.inhibit-handle-power-key
    org.freedesktop.login1.inhibit-handle-suspend-key
    org.freedesktop.login1.power-off
    org.freedesktop.login1.power-off-ignore-inhibit
    org.freedesktop.login1.power-off-multiple-sessions
    org.freedesktop.login1.reboot
    org.freedesktop.login1.reboot-ignore-inhibit
    org.freedesktop.login1.reboot-multiple-sessions
    org.freedesktop.login1.set-user-linger
    org.freedesktop.login1.suspend
    org.freedesktop.login1.suspend-ignore-inhibit
    org.freedesktop.login1.suspend-multiple-sessions
    org.freedesktop.machine1.login
    IOW I need to replace every yes and no etc. with auth_admin in $ grep -v lang /usr/share/polkit-1/actions/org.freedesktop.login1.policy.
    Am I mistaken?
    Regards,
    Ralf

    You'll need to create a rules file which uses javascript.
    https://wiki.archlinux.org/index.php/Po … tion_rules
    // /etc/polkit-1/rules.d/10-admin-shutdown-reboot.rules
    polkit.addRule(function(action, subject) {
    if (action.id == "org.freedesktop.login1.power-off" ||
    action.id == "org.freedesktop.login1.power-off-ignore-inhibit" ||
    /*...SOME_MORE_IDS_HERE...*/
    // return polkit.Result.AUTH_ADMIN_KEEP;
    return polkit.Result.AUTH_SELF_KEEP;
    Last edited by progandy (2015-06-21 17:42:35)

  • Safari and Entourage suddenly won't connect, or stay connected (dial-up)

    Help! (Please note that this is a question about a MacBook; ignore "Powerbook G4" signature).
    The Safari and Entourage applications on my new MacBook, which is on an Apple USB external dial-up modem (NOT wireless or Ethernet), have suddenly stopped connecting. Manifestations:
    (1) Safari: When Safari is opened, it connects normally via dial-up to the start page (Google), but then either won't connect to the next website or goes to a new website, then disconnects after a minute or two. The error message then appears: "You are not connected to the Internet. Safari can't open the page [website address] because your computer isn't connected."
    (2) Entourage: After this problem recurred several times, I decided to test Entourage, which had been working fine. I connected manually to the Internet, and with the connection holding, I tried to send a test message to myself. I then got the error message, "Your Mac OS Network Preferences are not configured to allow automatic connections" (they were, and anyway, the computer was already connected). The computer then disconnected and I got the message "The computer has disconnected because the other side is not responding."
    I've tried the following, without success: (1) Restarting. (2) Resetting Safari. (3) When neither helped, I double-checked my network configurations, as well as my account settings in Entourage, and they all seemed okay. However, each time I typed the correct password into the network configurations box, it added about 8 additional dots as soon as I checked "Apply." (I've been told that this is a security feature, but it hasn't happened in the past.)
    I then checked the settings using the Apple Network Diagnostics program that Safari offers. ND verified that the modem, modem settings, and ISP settings were okay, but that "Network Settings failed," "Internet failed," and "Server failed." Since the network settings looked right, I don't know what, if anything, this means, or whether the problem comes from something else.
    Thanks for any suggestions anyone has.

    Mandita 3 and Virtual Canary: Sorry it's taken me so long to get back to you. If you're still tuning in, in my case the problem of random disconnects on the USB external modem seems to have been resolved by simply switching USB ports on the MacBook.
    I talked yesterday to an AppleCare "product specialist"--ie, a level 2 techie--whom I had requested to take me through an Archive and Install of OS 10.4.6 to downgrade from the 10.4.7 upgrade I had done, which I thought was causing the problem because the kernel panics (recorded in my computer's log) began happening right after that.
    He suggested that we first try the simple expedient of switching to the other port--he said that he had had this problem several times on his own computer with other USB devices, and that had done the trick; if it didn't work, we could still do the Archive and Install, but he said that "Some USB devices just turn out to be incompatible with one or the other port; it's just quirky."
    I've been testing the machine for a couple of hours and the switch seems to have taken care of the problem (to double-check, I went back to the first port once and the random disconnects after 2-5 minutes began happening again).
    I've only been testing the machine for a short time, so I can't say for sure that this works. Also, even if it does work, I'm going to call my authorized repair place and ask if the "defective" port can be repaired or replaced--it was working fine for the first 6 weeks that I had the machine, so presumably the one that still works fine could develop an allergy to the external modem, too.
    Hope this information is of use to you.

  • Guest password request for purplecat website in oakland california 192.168.33.112

    guest password request for purplecat website in oakland california 192.168.33.112

    I have the same errors occurring at an alarming rate. I did isolate it to the App Store. Specifically when checking for an update. I was hoping that you could test this out for me. Go to your console log and select all messages and then check kernel in the sender box (bottom left). I found that now is a good time to insert a marker. Now launch the app store then got to the update section. Select check for update.
    Does this generate a series of the errors? I can reproduce the errors every time I "check for updates". The error would not show up when checking for updates in iTunes.
    I did notice errors in both extending from CFNetwork
    App store:
    2015-01-15 8:40:38.047 AM storeassetd[356]: CFNetwork SSLHandshake failed (-9802)
    iTunes
    2015-01-15 8:53:53.986 AM iTunes[2200]: CFNetwork SSLHandshake failed (-9806)
    Please compare and see if you get the same results.

  • Snow Leopard - Safari and Entourage 'drop out' after a period of inactivity

    Ever since I loaded up 10.6 (and later 10.6.1), both Safari and Entourage get the beach ball when my system has been inactive for an hour or more (time based problem?). Doing resets, clearing caches etc. do not seem to have any effect. The only effective way to get Safari/Entourage back is to restart the system (I thought I had left this behind when I waved good bye to PCs). Sometimes it appears that running Network Diagnostics has cleared it but this is not absolutely reliable.
    My ISP tells me the system is up/available and it can 'talk' to my modem and they imply that it is an Apple software problem. Apple imply my modem is on the blink but get me to push some keys and the problem 'temporarily' goes away until after the next period of inactivity.
    Any help would be appreciated.

    Have you considered using wicd?  I use it on this computer, and have had no problems with it.  However, to be fair, the packages on this pc haven't been updated for a LONG time, so it is possible that if i updated it, I'd have the same problem.  You didn't mention a wireless connection daemon, so I thought that I'd ask.

  • I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect.  How can I corr

    I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect.  How can I correct this? I have been emailing support but so far they have been no help

    Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • Some images do not display in browser, iPad Air 2.  When I load a page with several jpgs (one 1920x720, then 8-10 800x800px), only the first few are shown.  Behaviour is similar for Safari and Chrome. Website issue or iPad?

    I have just bought an iPad, partly to check that my websites work OK on mobile devices.   When I load a page with several jpgs (e.g. one 1920x720, then 8-10 800x800px), only the first few are shown.  If I remove the large one, that sometimes fixes the problem. Behaviour is similar for Safari and Chrome. Is this a website issue or iPad?

    Sorry, I didn't make myself clear.  I'm using a new Wordpress theme that is meant to be responsive.  The large image is for a header, than you scroll down to see the rest, one by one.  Some one the pages work OK on my iPad, typically the old ones where the maximum image size was 500 x 500.  It's the new pages and those I've updated that are causing the problem.  On the iPad the large image loads, then a couple of the small ones become visible as I scroll down, but then darkness (rather like my knowledge level).
    Being new to IOS and iPads, I'm trying to work out whether I should be looking here, or amongst the Wordpress stuff for a solution.
    Here's the website with its new theme: http://www.new-zealand-pictures.com/

  • I get this error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" when trying to latest mountain lion updates (for safari and RAW) on macbook pro running osx 10.8.2

    I am trying to update the latest patches for safari and RAW, however I get the following error "The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)" is anyone else having the same issues? I am currently running Mountain Lion 10.8.2

    IDEM  problem... grrrrrrrrrrrr  
    MacBook Pro OS X Mountain Lion 10.8.2 (12C60)
    I have found this link...
    http://9to5mac.com/2012/11/01/apple-updates-safari-6-0-2-iphoto-9-4-2-and-apertu re-3-4-2/

  • We upgraded or computer from os x to Snow Leopard 10.6.3 now our icons  for safari and mail won't open

    We upgraded or computer from os x to Snow Leopard 10.6.3 now our icons  for safari and mail won't open

    Drag the icons from the Dock, go to the Applications folder and drag Safari and Mail (one at a time) to the Dock. Don't release the mouse button until the adjaxent icons move out of the way for the one you're adding.
    That should compensate for the updates to Mail and Safari introduced with SL.

  • Requesting for Vehicle, and

    HI,
      How can map to the Transpotation Process as well  Vehicle information,
         My company process is own manufacturing and  internal transpotation arrangement, when delivery is required, thay are making delivery document and as well raise for the request arrange vehicle, then after making shipment document , when arrange vehicle maintain vehicle meter reading and time of going outside and time of comeing inside these details maintained here. and any problem of vehicle also maintained.
        where can i map of this process , please anybody help to me
    Regards,
    Kishore.

    I have a really hard time understanding that requirement.... in none of our projects has this come up so far. What's the reasoning behind that?
    I mean, if you do that, a can't request for a, and b can't request for b, but a can request for b, and b for a, right?
    So, the only reasoning behind that would be some kind of SoD separation between requester and user (which serves no real purpose, does it??).
    If you want to limit the people that can request at all to a certain group, set authetication source to UME and give only those users a UME account.
    Or, if you want SoD, set "approve/reject own request" to "no" in end user personalization, so the approver can not be the same persoin as the requester.
    If none of these suit you, maybe you can explain in a bit more detail what you're trying to achieve.
    Frank.

  • Convert .fla files for Safari and Chrome

    hi boys,
    i need to convert .fla file for Safari and Chrome.
    i pay for that, after new file is tested, and is ok.
    the fee is 40$/file

    I'm afraid you have quite a few html errors on the page I tested  (about us page) that really need to be fixed - and some of them are likely the cause of the browser rendering the pages differently.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.newpathstherapy.com%2Fabout.h tml
    For example, you can only use an ID once per page.
    Also a few CSS errors: - in particular the first one - where you have the missing # hash tag before the color declaration.  The others relate to the styleing of the scrollbar - which isn't worth the effort really because is a PC IE only thing anyway:
    http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. newpathstherapy.com%2Fabout.html
    I think you have 'overwritten the code for the menu.. particularly the way you have used the IDS - which is causing an issue anyway.  The menu can be made more simply and minimally styled with css - see this list of styling list menus:
    HORIZONTAL / VERTICAL MENUS:
    http://css.maxdesign.com.au/listamatic/
    You need to fix those errors and then see how the page stands.  If you have further problems after the 'fix', then post back.

  • IPhoto -share to email not working-The email server didn't recognize your username/password combination- for hotmail and big pond- since apple technical support re-hotmail on iPhone.

    iPhoto -share to email not working-The email server didn’t recognize your username/password combination- for hotmail and big pond- since apple technical support re-hotmail on iPhone.

    in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
    OR
    IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
    LN

  • I recently was sent an update for Safari and I hate it. How to revert back to how it was...

    I recently was sent an update for Safari and I hate it. How to revert back to how it was...

    I think you'll have to reinstall the OS from your Restore partition.

  • HT204053 How do I turn cookies on for safari and iTunes Store?

    How do I turn cookies on for safari and iTunes Store?

    Settings>Safari>Block Cookies>From third parties and advertisers (or Never).

Maybe you are looking for

  • Mass Storage Device Drivers have been corrupted itunes 7.0.2 cant fix it

    My ipods mass storage device drivers have been corrupted (Device cannot be started Code 10). Itunes 7.0.2 cant fix it. Im not willing to uninstall itunes and reinstall it to fix problem. I have 2 librarys on my hard drive with the guts of 120g of tun

  • Documents not posted to cost center

    Hi, The documents are posted into sap from third party system through interface. And in the transaction OKB9 (default account assignment), cost center is assigned to the particular GL account. The FI document displays that particular GL account conta

  • 5800 Gallery Issue

    Hi, There is some problem witht the my phone. Whenever i go to Menu>Gallery>IMages & Videos i dont see a single image or a video which i have stored. However, when i go to Menu>Application>File Manager> Memory Card>Images i am able to view all the im

  • Tracking the service Items

    Dear Experts, As per my client requirement, They are frequently sending some Machine parts for repairing and they want that they should know at which vendor the Parts are sent. For some Items which are the inventory items I suggested that they can ma

  • Customise Userid/Password rule

    HI I want to set my own userid/password rule to the users.As per the standard, As per the requirement userid should be like below.. 1) Only First letter should be Alphabet  2) Rest are Numeric. 3) Length should be 7. Is it possible through configurat