Password required for pdfs normally read under Windows
For some pdfs which I seamlessly open under Windows, I get password prompt and finally without password they do not open.
I noticed that there are additional security options set on these documents, but still they do open in the Reader under Windows.
How to open such files?
Yes, I am interested in this as well. I purchased a PDF document (SCJP Study Guide) for $30 from ePlanetLabs.com. The content is excellent and I began reading it on my PC.
Then I got the Nokia 9300. And, being on-the-go, I decided to move my e-book to it. The reader on the 9300 asks me for my password; which I provide and it accepts.
But most of the book is garbled in the reader. The only thing that I can read is the reminder on the top of all 40 pages:
SCJP 5.0 Certification Study Guide for Sun Certified Programmer
IMPORTANT NOTE: We did our best to develop this product. We are not responsible to meet highest quality of any one's high expectations. You purchased this eBook with your own risk and with your own interest, so we are not responsible for any of your dissatisfaction or concerns. Thanks for your purchase.
Well. This is nice. Adobe Reader is free. Nokia 9300 is a cost-item. And so is my eBook. But neither Adobe, Nokia nor ePlanetLabs will accept responsibility for being able to actually *use* my eBook.
It doesn't stop there, however. I ordered a book (in PDF) from campusebookstore.com; again, it reads fine on my PC. But on my Nokia 9300, Adobe Reader (1.1 Build 08202004) reports:
--------- snip -------------
ERROR:
This file is encrypted using an unsupported PDF encryption scheme.
--------- snip -------------
I went back to my PC to determine what the file's properties are... and Poof! I cannot open it on my PC. Adobe Reader (7.0.8) reports:
--------- snip -------------
CANNOT OPEN DOCUMENT
This document cannot be opened because its ownership has not been established on this computer.
(O) I own it and I copied it to this computer or restored it from a backup
() Someone else gave it to me and I would like to own it
[Obtain Ownership] [Cancel]
--------- snip -------------
Somewhere along the way (during the past 7 hours which I have spent trying to solve Adobe issues) I used the Adobe DRM Activator and apparently corrupted the initial Activator which was installed with my eBook. What frustration!
At this point in the technology... it seems that normal books are best; at least until Adobe can simplify life for the end-user with the same zeal which it has for protecting the sellers of eBooks.
Similar Messages
-
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Authorisations to run Adobe Reader under Windows 8
Under windows 8 with adobe reader 11, I have not been able to launch the program. Each time the system says I don't have the authorisations required (even when I follow instructions to get additional authorisations which I seem unable to obtain despite using the normal sequence of "properties" , "security" " advanced etc. and in this case I get the following message in the "target" slot"
The name "c:\program files\adobe\READER 11.0\Reader\AcroRd32.exe" is not valid. Verify that the routing (?) and the name of the file are correct
when I click on the Security tag although the location of the programes of Adobe Reader 11 are in fact in the location detailed above. It would seem that windows 8 has a security system that I don't seem to be able to adjust. (I have used Acrobat under Vista and under XP without these problems) . At the moment and after three days of efforts I am still incapable of getting Reader 11 to run..(a) After installation of Reader 11.0, the following text appears on the
screen after either double clic on the screen icone or clic on c: directory
(c:\programmes\adobe\Reader 11.0 :-
Title: Reader 11.0
Vous ne disposez pas des autorisations requises pour acceder à ce dossier
(Translation (not on screen): You don't have the authorisations required to
accede to this file)
(There are two tabs ("Continue" and "Cancel")
If one clics on "Continuer" the screen reads:
Reader 11.0
L'acces à ce dossier vous a été refusé. Pour acceder à ce dossier vous
devez utiliser l'onglet de securité :
Translation: Acces to this file for you has been denied. To acces this
file you should use the "Security" tab.
One tab: "Fermer" (Close)
If one then does a right clic on the Reader 11.0 screen icone, and then
clic on "properties" then clic on "Security", I get a listing of "groupes or
users" which for this computer gives the following : "System", "John
Willis([email protected]"), "Administrateur (rulepar\Administrateur),
"Administrateurs (rulepar\Administrateurs), "Interactif". Each of these has a check
mark against "Controle Totale",
"Modification", "Lecture et execution", lecture", "Ecriture" and the three
"rulepar" entries each have a check mark against "Autorisations spéciales".
If one clics on the tab "Avancé" then
on the "Autorisations tab 'john willis ([email protected]_
(mailto:[email protected]) ), 'Administrateur (rulepar\Administrateur), "INTERACTIF",
"Administrateurs (rulepar\administrateurs), "Systeme" all have "Controle Totale"
, "Interactif" has "Lecture et Execution" and "Administrateyr
(rulepar\Administrateur) and "john willis ([email protected]_ (mailto:[email protected]) )
have "Special"
on the "Partage" (share?) tab there are two entries (Type = Autoriser"
Principal for "Administrateurs (rulepar\Administrateurs) and "Tout le monde
(everybody)
on the Audit tab there is nothing and on the Acces Effectif page there is
"Select a user but nothing else.
The title of this page is c:\users\Public@Desktop\Adobe Reader XI. lnk
under a page title "Parameters of advanced security for Adobe Reader XI
Regards and thanks
John Willis
[email protected] (mailto:[email protected])
In a message dated 05/06/2013 14:35:32 Paris, Madrid (heure d’été),
[email protected] writes:
Re: Authorisations to run Adobe Reader under Windows 8
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5380876#5380876) -
Dear Gurus ,
I have come across the situation in which I want to converted PDF to be password protected .
I have converted the smartform into PDF using OTF and sending as a mail .
But now I want to add the Functionality of adding the Password how to Proceed for this .
for converting PDF I am using the Funtion Modukle :
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = v_len_in
* BIN_FILE =
TABLES
otf = it_otf
lines = it_lines.
How to Make this Converted PDF password protected ?
I cant use ADOBE life cycle Designer for this . Please help
Thanks & Regards ,
Aryanyou will have to take the help of Professional Pdf editind tools such as Nova pdf or the Full version of Adobe Acrobat i.e. Acrobat Professional ..
also check the links below ..
[LINK|http://techblissonline.com/how-to-password-protect-pdf-documents-or-files/]
and quote from the same
How to password protect PDF documents or files?
Open the PDF file in Acrobat
Select File > Document Security from the menu
Got to the u201CSecurity Optionsu201D drop-down and select u201CAcrobat Standard Securityu201D
Find the box labelled u201CPassword required to open documentu201D and place a check mark against it.
Edit or type the password
You can also add a password requirement for changing permissions or password.To add a a required password check the box against u201Crequired password to change permissions or passwordu201D and enter the password. However note that this password must be different from the one that you entered for securing or password protecting the PDF file.
If you want your PDF document to be password accessible to users with previous versions of Acrobat Reader (versions earlier than 5.0), do not change the 40-bit encryption setting. However if your users or audience will be using version 5 or later versions of the Reader (or the full Acrobat program) then you may use 128-bit encryption.
Best Re -
HT4113 i cant cancel password required for the caidav
i cant cancel password required for the caidav
- Have you looked at the two previous discussions on the right hand side of this page under the heading "More Like This" with your same question?
- Have you tried deleting the calendar associated with the caidav and then recreating it? -
Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit
Hi,
I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
The printer works fine on my other laptop with Vista on it. Help!Hi peshi77,
Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Once downloaded, please follow the on screen instructions. I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?
Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
Mylenium -
Hardware requirements for sap bw3.5 in windows environment
Pls help me the hardware setup(harddisk,ram etc) required for SAP BW3.5 in windows environment.
thanks in advance..
Regards
GaneshHi,
HDD : 100GB
RAM : 1 GB
regards,
Raju -
How do I create a new folder for saving a PDF in Reader using Windows 8.1?
I used to be able to create a folder in which to save a PDF. With the new Reader in Windows 8.1, I have not found that option.
Wow. The light bulb just went off! I have the Reader that was installed on my HP notebook and - you are right - it is the Microsoft Reader. I just assumed it was Adobe's product which I have used for years. No wonder I can't find the options I generally used.
I will download the Adobe Reader. Thank you for your feedback and help!!!
Gail
Gail Klein -
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files. -
JVM crash for RCP/SWT application under windows
Hi,
We are running an RCP application under windows which uses SWT components .Intermittently the JVM carshes.I doubt SWT is the prime suspect or JVM???We are unable to identify the exact sequence in which the crash occurs.I'm attaching some hs_err_pdi* log files for the abnormal crash.
Any insight appreciated.
rgds,
tess
Core dump 1:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d6d6f09, pid=528, tid=2988
# Java VM: Java HotSpot(TM) Client VM (1.5.0_02-b09 mixed mode)
# Problematic frame:
# V [jvm.dll+0x96f09]
--------------- T H R E A D ---------------
Current thread (0x00368338): JavaThread "main" [_thread_in_vm, id=2988]
siginfo: ExceptionCode=0xc0000005, reading address 0x65636194
Registers:
EAX=0x65636170, EBX=0x00a47c80, ECX=0x0006eeb4, EDX=0x00a82480
ESP=0x0006eea8, EBP=0x0006eec0, ESI=0x076271e8, EDI=0x0000021e
EIP=0x6d6d6f09, EFLAGS=0x00010216
Top of Stack: (sp=0x0006eea8)
0x0006eea8: 076271e8 0000021e 076271e8 0006f000
0x0006eeb8: 076271e8 00a47c80 0006f000 6d7091d8
0x0006eec8: 076271e8 6d6f779a 003687ac 07608b68
0x0006eed8: 00368338 6d766380 00000002 0006f108
0x0006eee8: 00a82d81 0006f12c 00368338 00000002
0x0006eef8: 00368338 003687c4 06c21f40 0000000a
0x0006ef08: 00000000 0000000a 00368740 00367ef8
0x0006ef18: 00367f00 003682ec 003687dc 003687bc
Instructions: (pc=0x6d6d6f09)
0x6d6d6ef9: ec 83 ec 0c 56 8b 75 08 57 56 8b 46 08 8d 4d f4
0x6d6d6f09: 0f b7 40 24 89 45 fc 8b 46 0c 8b 78 14 e8 ae 92
Stack: [0x00030000,0x00070000), sp=0x0006eea8, free space=251k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x96f09]
V [jvm.dll+0xc91d8]
V [jvm.dll+0x7c921]
j com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.load(IZ)Z+127
j com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.skipSpaces()Z+246
j com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Z)Z+87
j com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Z)Z+24
j com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Z)Z+118
j com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Lcom/sun/org/apache/xerces/internal/xni/parser/XMLInputSource;)V+29
j com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Lcom/sun/org/apache/xerces/internal/xni/parser/XMLInputSource;)V+9
j com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Lorg/xml/sax/InputSource;)V+43
j com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Lorg/xml/sax/InputSource;)Lorg/w3c/dom/Document;+61
j org.eclipse.jface.dialogs.DialogSettings.load(Ljava/io/Reader;)V+18
j org.eclipse.jface.dialogs.DialogSettings.load(Ljava/lang/String;)V+29
j org.eclipse.ui.plugin.AbstractUIPlugin.loadDialogSettings()V+57
j org.eclipse.ui.plugin.AbstractUIPlugin.getDialogSettings()Lorg/eclipse/jface/dialogs/IDialogSettings;+8
j org.eclipse.ui.internal.registry.PerspectiveRegistry.load()V+11
j org.eclipse.ui.internal.WorkbenchPlugin.getPerspectiveRegistry()Lorg/eclipse/ui/IPerspectiveRegistry;+22
j org.eclipse.ui.internal.Workbench.getPerspectiveRegistry()Lorg/eclipse/ui/IPerspectiveRegistry;+3
j org.eclipse.ui.internal.Workbench.doOpenFirstTimeWindow()V+2
j org.eclipse.ui.internal.Workbench.openFirstTimeWindow()V+17
j org.eclipse.ui.internal.WorkbenchConfigurer.openFirstTimeWindow()V+7
j org.eclipse.ui.application.WorkbenchAdvisor.openWindows()Z+45
j org.eclipse.ui.internal.Workbench.init(Lorg/eclipse/swt/widgets/Display;)Z+671
j org.eclipse.ui.internal.Workbench.runUI()I+39
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+11
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j com.stabilix.hc.Application.run(Ljava/lang/Object;)Ljava/lang/Object;+237
j org.eclipse.core.internal.runtime.PlatformActivator$1.run(Ljava/lang/Object;)Ljava/lang/Object;+257
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+170
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+57
v ~StubRoutines::call_stub
V [jvm.dll+0x818e8]
V [jvm.dll+0xd4989]
V [jvm.dll+0x817b9]
V [jvm.dll+0xe4c04]
V [jvm.dll+0x9f94f]
C [java.dll+0x6c08]
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j org.eclipse.core.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+181
j org.eclipse.core.launcher.Main.basicRun([Ljava/lang/String;)V+107
j org.eclipse.core.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.core.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
V [jvm.dll+0x818e8]
V [jvm.dll+0xd4989]
V [jvm.dll+0x817b9]
V [jvm.dll+0x88747]
C [javaw.exe+0x14c0]
C [javaw.exe+0x313d]
C [kernel32.dll+0x16d4f]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.load(IZ)Z+127
j com.sun.org.apache.xerces.internal.impl.XMLEntityScanner.skipSpaces()Z+246
j com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$TrailingMiscDispatcher.dispatch(Z)Z+87
j com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Z)Z+24
j com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Z)Z+118
j com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Lcom/sun/org/apache/xerces/internal/xni/parser/XMLInputSource;)V+29
j com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Lcom/sun/org/apache/xerces/internal/xni/parser/XMLInputSource;)V+9
j com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Lorg/xml/sax/InputSource;)V+43
j com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Lorg/xml/sax/InputSource;)Lorg/w3c/dom/Document;+61
j org.eclipse.jface.dialogs.DialogSettings.load(Ljava/io/Reader;)V+18
j org.eclipse.jface.dialogs.DialogSettings.load(Ljava/lang/String;)V+29
j org.eclipse.ui.plugin.AbstractUIPlugin.loadDialogSettings()V+57
j org.eclipse.ui.plugin.AbstractUIPlugin.getDialogSettings()Lorg/eclipse/jface/dialogs/IDialogSettings;+8
j org.eclipse.ui.internal.registry.PerspectiveRegistry.load()V+11
j org.eclipse.ui.internal.WorkbenchPlugin.getPerspectiveRegistry()Lorg/eclipse/ui/IPerspectiveRegistry;+22
j org.eclipse.ui.internal.Workbench.getPerspectiveRegistry()Lorg/eclipse/ui/IPerspectiveRegistry;+3
j org.eclipse.ui.internal.Workbench.doOpenFirstTimeWindow()V+2
j org.eclipse.ui.internal.Workbench.openFirstTimeWindow()V+17
j org.eclipse.ui.internal.WorkbenchConfigurer.openFirstTimeWindow()V+7
j org.eclipse.ui.application.WorkbenchAdvisor.openWindows()Z+45
j org.eclipse.ui.internal.Workbench.init(Lorg/eclipse/swt/widgets/Display;)Z+671
j org.eclipse.ui.internal.Workbench.runUI()I+39
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+11
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j com.stabilix.hc.Application.run(Ljava/lang/Object;)Ljava/lang/Object;+237
j org.eclipse.core.internal.runtime.PlatformActivator$1.run(Ljava/lang/Object;)Ljava/lang/Object;+257
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+170
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+57
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j org.eclipse.core.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+181
j org.eclipse.core.launcher.Main.basicRun([Ljava/lang/String;)V+107
j org.eclipse.core.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.core.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0b16ad20 JavaThread "Thread-1" daemon [_thread_blocked, id=2932]
0x0af3f128 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=1568]
0x0affb840 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=3368]
0x0ad535f0 JavaThread "State Data Manager" daemon [_thread_blocked, id=4088]
0x00a4de70 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3972]
0x00a4c408 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2056]
0x00a4b0d0 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=988]
0x00a495e8 JavaThread "JDWP Command Reader" daemon [_thread_in_native, id=2076]
0x00a48740 JavaThread "JDWP Event Helper Thread" daemon [_thread_blocked, id=4012]
0x00a42698 JavaThread "JDWP Transport Listener: dt_socket" daemon [_thread_blocked, id=2960]
0x00a38e98 JavaThread "Finalizer" daemon [_thread_blocked, id=2808]
0x00a37a08 JavaThread "Reference Handler" daemon [_thread_blocked, id=1212]
=>0x00368338 JavaThread "main" [_thread_in_vm, id=2988]
Other Threads:
0x00a338c0 VMThread [id=2156]
0x00a4f0b8 WatcherThread [id=4048]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 0K [0x02a80000, 0x02b20000, 0x02f60000)
eden space 512K, 0% used [0x02a80000, 0x02a80000, 0x02b00000)
from space 64K, 0% used [0x02b10000, 0x02b10000, 0x02b20000)
to space 64K, 0% used [0x02b00000, 0x02b00000, 0x02b10000)
tenured generation total 4928K, used 2954K [0x02f60000, 0x03430000, 0x06a80000)
the space 4928K, 59% used [0x02f60000, 0x03242a58, 0x03242c00, 0x03430000)
compacting perm gen total 12288K, used 12078K [0x06a80000, 0x07680000, 0x0aa80000)
the space 12288K, 98% used [0x06a80000, 0x0764ba68, 0x0764bc00, 0x07680000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0040c000 C:\Program Files\Java\jre1.5.0_02\bin\javaw.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000 C:\WINDOWS\system32\GDI32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x6d640000 - 0x6d7c5000 C:\Program Files\Java\jre1.5.0_02\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000 C:\Program Files\Java\jre1.5.0_02\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d380000 - 0x6d3b5000 C:\Program Files\Java\jre1.5.0_02\bin\jdwp.dll
0x6d610000 - 0x6d61c000 C:\Program Files\Java\jre1.5.0_02\bin\verify.dll
0x6d300000 - 0x6d31d000 C:\Program Files\Java\jre1.5.0_02\bin\java.dll
0x6d630000 - 0x6d63f000 C:\Program Files\Java\jre1.5.0_02\bin\zip.dll
0x6d220000 - 0x6d227000 C:\Program Files\Java\jre1.5.0_02\bin\dt_socket.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x6d4c0000 - 0x6d4d3000 C:\Program Files\Java\jre1.5.0_02\bin\net.dll
0x6d4e0000 - 0x6d4e9000 C:\Program Files\Java\jre1.5.0_02\bin\nio.dll
0x10000000 - 0x10050000 C:\Eclipse-Latest\eclipse\workspace\.metadata\.plugins\org.eclipse.pde.core\hc.product\org.eclipse.osgi\bundles\66\1\.cp\swt-win32-3201.dll
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x773d0000 - 0x774d2000 C:\WINDOWS\WinSxS\X86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\COMCTL32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x7c9c0000 - 0x7d1d5000 C:\WINDOWS\system32\SHELL32.dll
0x77120000 - 0x771ac000 C:\WINDOWS\system32\OLEAUT32.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.dll
0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll
VM Arguments:
jvm_args: -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,suspend=y,address=localhost:3797
java_command: org.eclipse.core.launcher.Main -launcher c:\Eclipse-Latest\eclipse\eclipse -name Eclipse -showsplash 600 -product com.stabilix.hc.hc -data C:\Eclipse-Latest\eclipse\runtime-hc.product -configuration file:C:/Eclipse-Latest/eclipse/workspace/.metadata/.plugins/org.eclipse.pde.core/hc.product/ -dev file:C:/Eclipse-Latest/eclipse/workspace/.metadata/.plugins/org.eclipse.pde.core/hc.product/dev.properties -pdelaunch -os win32 -ws win32 -arch x86
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_02
CLASSPATH=.;C:\PROGRA~1\IBM\SQLLIB\java\db2java.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc.jar;C:\PROGRA~1\IBM\SQLLIB\java\sqlj.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cisuz.jar;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\PROGRA~1\IBM\SQLLIB\bin;C:\PROGRA~1\IBM\SQLLIB\tools\db2XTrigger.jar;C:\PROGRA~1\IBM\SQLLIB\java\common.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;.;C:\Program Files\Java\jdk1.5.0_02;C:\workspace\test;C:\Program Files\Java\jdk1.5.0_02\bin;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbxml.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\db.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbxmlexamples.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbexamples.jar;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse\workspace\simple\map;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse;
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\NetManage\Windows;C:\PROGRA~1\IBM\SQLLIB\BIN;C:\PROGRA~1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;C:\jdk1.3.1_02\include;C:\DBXML\dbxml-2.0.9\dbxml\bin\release;C:\jdk1.3.1_02\bin;C:\Program Files\ZeusSCC-CVS;C:\Program Files\Java\jdk1.5.0_02\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\bin;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse;C:\MSSQL7\BINN;C:\Eclipse-Latest\eclipse\configuration\org.eclipse.osgi\bundles\64\1\.cp;C:\PROGRA~1\IBM\CLIENT~1;C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;C:\Eclipse-Latest\birt-runtime-1_0_1\bin
USERNAME=metty
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 522228k(84240k free), swap 2028336k(1554380k free)
vm_info: Java HotSpot(TM) Client VM (1.5.0_02-b09) for windows-x86, built on Mar 4 2005 01:53:53 by "java_re" with MS VC++ 6.0
Core dump:2
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0537f870, pid=3376, tid=2188
# Java VM: Java HotSpot(TM) Client VM (1.5.0_02-b09 mixed mode, sharing)
# Problematic frame:
# C 0x0537f870
--------------- T H R E A D ---------------
Current thread (0x00357dc8): JavaThread "main" [_thread_in_native, id=2188]
siginfo: ExceptionCode=0xc0000005, reading address 0x0537f870
Registers:
EAX=0x7ffdf000, EBX=0x00000000, ECX=0x00000000, EDX=0x00000002
ESP=0x0006f1ec, EBP=0x0006f214, ESI=0x0537f870, EDI=0x0006f250
EIP=0x0537f870, EFLAGS=0x00010202
Top of Stack: (sp=0x0006f1ec)
0x0006f1ec: 77d48734 0014074a 0000001c 00000000
0x0006f1fc: 00000508 0537f870 dcbaabcd 00000000
0x0006f20c: 0006f250 0537f870 0006f27c 77d48816
0x0006f21c: 0537f870 0014074a 0000001c 00000000
0x0006f22c: 00000508 00000000 0014074a 00000102
0x0006f23c: 00000014 00000001 00000000 00000000
0x0006f24c: 00000010 00000000 00000001 00000000
0x0006f25c: 00000000 00000000 0006f230 0006ee10
Instructions: (pc=0x0537f870)
0x0537f860:
[error occurred during error reporting, step 100, id 0xc0000005]
Stack: [0x00030000,0x00070000), sp=0x0006f1ec, free space=252k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x0537f870
C [USER32.dll+0x8816]
C [USER32.dll+0xb4c0]
C [USER32.dll+0xb50c]
C [ntdll.dll+0xeae3]
C [USER32.dll+0x9402]
C [swt-win32-3201.dll+0x8179]
J org.eclipse.swt.internal.win32.OS.PeekMessageW(Lorg/eclipse/swt/internal/win32/MSG;IIII)Z
J org.eclipse.swt.widgets.Display.readAndDispatch()Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
v ~OSRAdapter
j org.eclipse.ui.internal.Workbench.runUI()I+108
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+11
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j com.stabilix.hc.Application.run(Ljava/lang/Object;)Ljava/lang/Object;+167
j org.eclipse.core.internal.runtime.PlatformActivator$1.run(Ljava/lang/Object;)Ljava/lang/Object;+257
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+170
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+57
v ~StubRoutines::call_stub
V [jvm.dll+0x818e8]
V [jvm.dll+0xd4989]
V [jvm.dll+0x817b9]
V [jvm.dll+0xe4c04]
V [jvm.dll+0x9f94f]
C [java.dll+0x6c08]
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j org.eclipse.core.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+181
j org.eclipse.core.launcher.Main.basicRun([Ljava/lang/String;)V+107
j org.eclipse.core.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.core.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
V [jvm.dll+0x818e8]
V [jvm.dll+0xd4989]
V [jvm.dll+0x817b9]
V [jvm.dll+0x88747]
C [javaw.exe+0x14c0]
C [javaw.exe+0x313d]
C [kernel32.dll+0x16d4f]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
J org.eclipse.swt.internal.win32.OS.PeekMessageW(Lorg/eclipse/swt/internal/win32/MSG;IIII)Z
J org.eclipse.swt.widgets.Display.readAndDispatch()Z
J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
v ~OSRAdapter
j org.eclipse.ui.internal.Workbench.runUI()I+108
j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+11
j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
j com.stabilix.hc.Application.run(Ljava/lang/Object;)Ljava/lang/Object;+167
j org.eclipse.core.internal.runtime.PlatformActivator$1.run(Ljava/lang/Object;)Ljava/lang/Object;+257
j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+170
j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+57
v ~StubRoutines::call_stub
j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+111
j org.eclipse.core.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+181
j org.eclipse.core.launcher.Main.basicRun([Ljava/lang/String;)V+107
j org.eclipse.core.launcher.Main.run([Ljava/lang/String;)I+4
j org.eclipse.core.launcher.Main.main([Ljava/lang/String;)V+10
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x03076980 JavaThread "Worker-0" [_thread_blocked, id=884]
0x00a6cdc0 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=2340]
0x00a68920 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=2936]
0x00a612b0 JavaThread "State Data Manager" daemon [_thread_blocked, id=484]
0x00a0e2f8 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=3280]
0x00a0ced0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3264]
0x00a0c1c0 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=844]
0x00a094a0 JavaThread "Finalizer" daemon [_thread_blocked, id=3680]
0x00a07ff0 JavaThread "Reference Handler" daemon [_thread_blocked, id=2316]
=>0x00357dc8 JavaThread "main" [_thread_in_native, id=2188]
Other Threads:
0x00a07008 VMThread [id=2964]
0x00a0f508 WatcherThread [id=552]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 704K, used 454K [0x22a70000, 0x22b30000, 0x22f50000)
eden space 640K, 68% used [0x22a70000, 0x22ade4e8, 0x22b10000)
from space 64K, 20% used [0x22b20000, 0x22b23540, 0x22b30000)
to space 64K, 0% used [0x22b10000, 0x22b10000, 0x22b20000)
tenured generation total 8776K, used 5412K [0x22f50000, 0x237e2000, 0x26a70000)
the space 8776K, 61% used [0x22f50000, 0x23499290, 0x23499400, 0x237e2000)
compacting perm gen total 20480K, used 20413K [0x26a70000, 0x27e70000, 0x2aa70000)
the space 20480K, 99% used [0x26a70000, 0x27e5f6c8, 0x27e5f800, 0x27e70000)
ro space 8192K, 62% used [0x2aa70000, 0x2af78018, 0x2af78200, 0x2b270000)
rw space 12288K, 46% used [0x2b270000, 0x2b7fc620, 0x2b7fc800, 0x2be70000)
Dynamic libraries:
0x00400000 - 0x0040c000 C:\Program Files\Java\jre1.5.0_02\bin\javaw.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77d40000 - 0x77dd0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f57000 C:\WINDOWS\system32\GDI32.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x6d640000 - 0x6d7c5000 C:\Program Files\Java\jre1.5.0_02\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d280000 - 0x6d288000 C:\Program Files\Java\jre1.5.0_02\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d610000 - 0x6d61c000 C:\Program Files\Java\jre1.5.0_02\bin\verify.dll
0x6d300000 - 0x6d31d000 C:\Program Files\Java\jre1.5.0_02\bin\java.dll
0x6d630000 - 0x6d63f000 C:\Program Files\Java\jre1.5.0_02\bin\zip.dll
0x6d4c0000 - 0x6d4d3000 C:\Program Files\Java\jre1.5.0_02\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x6d4e0000 - 0x6d4e9000 C:\Program Files\Java\jre1.5.0_02\bin\nio.dll
0x10000000 - 0x10050000 C:\Eclipse-Latest\eclipse\workspace\.metadata\.plugins\org.eclipse.pde.core\Eclipse Application\org.eclipse.osgi\bundles\8\1\.cp\swt-win32-3201.dll
0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll
0x5d090000 - 0x5d127000 C:\WINDOWS\system32\COMCTL32.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x7c9c0000 - 0x7d1d5000 C:\WINDOWS\system32\SHELL32.dll
0x77120000 - 0x771ac000 C:\WINDOWS\system32\OLEAUT32.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.dll
0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll
0x773d0000 - 0x774d2000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x74c80000 - 0x74cac000 C:\WINDOWS\system32\oleacc.dll
0x76080000 - 0x760e5000 C:\WINDOWS\system32\MSVCP60.dll
0x20000000 - 0x202c5000 C:\WINDOWS\system32\xpsp2res.dll
0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL
0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x75cf0000 - 0x75d81000 C:\WINDOWS\System32\mlang.dll
0x76380000 - 0x76385000 C:\WINDOWS\system32\msimg32.dll
0x77760000 - 0x778ce000 C:\WINDOWS\System32\shdocvw.dll
0x77a80000 - 0x77b14000 C:\WINDOWS\system32\CRYPT32.dll
0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll
0x754d0000 - 0x75550000 C:\WINDOWS\system32\CRYPTUI.dll
0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll
0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll
0x5b860000 - 0x5b8b4000 C:\WINDOWS\system32\NETAPI32.dll
0x771b0000 - 0x77256000 C:\WINDOWS\system32\WININET.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x77260000 - 0x772ff000 C:\WINDOWS\system32\urlmon.dll
0x77b40000 - 0x77b62000 C:\WINDOWS\system32\appHelp.dll
0x75e90000 - 0x75f40000 C:\WINDOWS\system32\SXS.DLL
0x6d000000 - 0x6d166000 C:\Program Files\Java\jre1.5.0_02\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x77920000 - 0x77a13000 C:\WINDOWS\system32\SETUPAPI.dll
0x03a60000 - 0x03ae8000 C:\WINDOWS\System32\shdoclc.dll
0x72b20000 - 0x72b38000 C:\WINDOWS\system32\plugin.ocx
0x769c0000 - 0x76a73000 C:\WINDOWS\system32\USERENV.dll
0x72d20000 - 0x72d29000 C:\WINDOWS\system32\wdmaud.drv
0x72d10000 - 0x72d18000 C:\WINDOWS\system32\msacm32.drv
0x77be0000 - 0x77bf5000 C:\WINDOWS\system32\MSACM32.dll
0x77bd0000 - 0x77bd7000 C:\WINDOWS\system32\midimap.dll
VM Arguments:
java_command: org.eclipse.core.launcher.Main -launcher c:\Eclipse-Latest\eclipse\eclipse -name Eclipse -showsplash 600 -product com.stabilix.hc.hc -data C:\Eclipse-Latest\eclipse\runtime-EclipseApplication -configuration file:C:/Eclipse-Latest/eclipse/workspace/.metadata/.plugins/org.eclipse.pde.core/Eclipse Application/ -dev file:C:/Eclipse-Latest/eclipse/workspace/.metadata/.plugins/org.eclipse.pde.core/Eclipse Application/dev.properties -pdelaunch -os win32 -ws win32 -arch x86
Environment Variables:
JAVA_HOME=C:\Program Files\Java\jdk1.5.0_02
CLASSPATH=.;C:\PROGRA~1\IBM\SQLLIB\java\db2java.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc.jar;C:\PROGRA~1\IBM\SQLLIB\java\sqlj.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cisuz.jar;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\PROGRA~1\IBM\SQLLIB\bin;C:\PROGRA~1\IBM\SQLLIB\tools\db2XTrigger.jar;C:\PROGRA~1\IBM\SQLLIB\java\common.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;C:\DBXML\dbxml-2.0.9\dbxml\bin\release\dbxml.jar;.;C:\Program Files\Java\jdk1.5.0_02;C:\workspace\test;C:\Program Files\Java\jdk1.5.0_02\bin;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbxml.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\db.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbxmlexamples.jar;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\jar\dbexamples.jar;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse\workspace\simple\map;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse;
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\NetManage\Windows;C:\PROGRA~1\IBM\SQLLIB\BIN;C:\PROGRA~1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;C:\jdk1.3.1_02\include;C:\DBXML\dbxml-2.0.9\dbxml\bin\release;C:\jdk1.3.1_02\bin;C:\Program Files\ZeusSCC-CVS;C:\Program Files\Java\jdk1.5.0_02\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\Sleepycat Software\Berkeley DB XML 2.1.8\bin;C:\jbpm\jbpm-starters-kit-with-eclipse-3.0\jbpm-designer\eclipse;C:\MSSQL7\BINN;C:\Eclipse-Latest\eclipse\configuration\org.eclipse.osgi\bundles\64\1\.cp;C:\PROGRA~1\IBM\CLIENT~1;C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\PROGRA~1\IBM\CLIENT~1\Emulator;C:\Eclipse-Latest\birt-runtime-1_0_1\bin
USERNAME=metty
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 7, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 1 family 15, cmov, cx8, fxsr, mmx, sse, sse2, ht
Memory: 4k page, physical 522228k(79952k free), swap 2028336k(1491168k frFirst, I would try and get the latest JDK 1.5.0_06 or 1.5.0_u7.. Next I would look
at the swt version you have..We've seen issues like this before.. Simple update of swt and the problem went away. Worth a try. Good luck -
Export for quick time running under windows?
I am coming to Final cut X pro from Imovie. Under Imovie I could export a movie that would run under quicktime for both Mac and Windows computers. Now using Final cut X pro, when I export for quicktime, my movie works fine using a Mac computer but fails under windows. When I attempt to open the movie quicktime tells me I have a problem with the codec. It indicates that I need an add on, but does not indicate which one is needed. Share works great for output to my Ipad. What I like to do is export to quicktime and use a windows computer to output to a wide screen tv. I down loaded the latest version of quicktime for windows. Under the share option what codec option should I chose, or do I require an add in to Quicktime? Thanks.
Not that you should have to, but try to make your final export from Compressor to see if that works better. Perhaps this can help you isolate the problem. H.264 should work in Windows, so you could also check your export on a different PC to see if the problem is on the receiving end.
I'll put in my vote here for Flip-for-mac getting their components to play nice with FCX. I have always found it a handy tool. -
Password encrypted for PDF payslip
Hi Experts,
Currently I am having a request to encrypt password for PDF payslip, which standard SAP does not support.
I observed that the encryption must be done in OS level (LINUX) after we execute the sending process in SAP and before the employee receives the payslip.
I found a tool that might be applicable in this case. Please help sharing experience on the follwing tool and verify if this product is reliable:
http://www.pdflabs.com/tools/pdftk-server/
Thanks & regards,You can write a plug-in (C/C++).
-
Password required for Mail?
I open up my Mail icon, and a window pops up that says, Cannot Send Mail, no password provided for user (my email address) of server (my server address).
Please go to Mail Account Settings and enter a password.
Question-How do I go to Mail Account Settings and enter a password? I cannot find this area?
Please help, and thank you in advance for your consideration.
iPhone Windows XPmaniac,
are you talking about the settings on the iphone or settings in itunes or mail? When you say "go back up into user name box and make a change", what kind of change are you talking about?
My issue is similar: I cannot send mail from my POP account (.mac works fine), and the error "address was rejected by the server" showed up each time, and the password field in SMTP on iPhone keeps reverting back to "Optional" no matter how many times I enter it, save it, whatever.
I spent an hour with Apple last week. The tech had me do a software restore, and advised me NOT to sync my mail. This worked.
While this is a good workaround (I got it to work), this is in the longer term unacceptable as it's a pain in the butt to delete mail (no group select of mail???) from the iPhone.
But I'd like to know more about this workaround you mention. -
Driver for LJET 3 printer under Windows 7 (64bit).
It's a perfectly good printer that I bought in 1980s and it's been working great for all these years under the Windows all the way up to and including XP. Recently I had to replace my XP PC by a Windows 7 (64bit) PC and I can't find a driver for it. Perhaps if anyone knows where I can get it...
There is also an issue with the cable - my new PC does not have a parallel port, so, I want to connect it to a USB port with a special cable "USB to Parallel IEEE 1284", which I assume is not going to give me "plug-and-play". When I click on Start ->Printers and Devices I can see a new device, IEEE-1284 Controller, not under Printers but under Unspecified. It shows that there is no hardware assigned to it. Is it going to be possible for me to "assign" somehow my LJET-3 to that controller?The problem is "solved" for individual consumers, but NOT SOLVED for those who work in companies with managed networks. There's no way our proxy server is going to permit company-owned computers to connect directly to Windows Update. The tech support people here have done what they can to look for a workaround, but there appears to be none.
I guess I can see this kind of brush-off happening with a cheap consumer printer. However, this is a business-class product, so I'm surprised that HP didn't come up with a solution for business users who are very happy with their 1220Cs and who are still buying plenty of "genuine HP" ink cartridges at non-discount prices.
Is it that big a deal to make a generic driver available in downloadable form?
I realize I'm wasting my breath, but I'm disappointed -- and a bit surprised that HP would consider theirhalf-hearted response to be a "solution." HP is telling us that it wants to "make it matter," but it is still trying to find its way.
Maybe you are looking for
-
Creating online help based on external documentation
Hi there I am in the process of writing a "handbook" for one application I have built. I will write it using MS Word, and it will have detailed information on how to use the app, including screenshots, arrows and other drawing objects. I would like t
-
BW3.5 - Query Cache - InfoObject decimal formatting
Hello all, I built a bw query, which displays key figures. Each key figure uses the decimal place formatting from the key figure infoobject (In Query Designer, the properties for each keyfigure for Decimal places, is set to "[From Key Figure 0.00]")
-
I'm using SQL Server 2014 and Reporting Services and I've got a report containing a number of linked subreports. The main report I have will be different for each customer I produce the report for and will contain different text, but I need to pass a
-
Dynamic Hierarchy Reporting function
Hi All, i was looking through the help and found: You can choose also whether to view dynamic hierarchies or standard Groups and Entity dimensions in the current view by making the appropriate selecting in the Current View selector. Thereafter, when
-
Hi, I just purchased the one year subscription for ExportPDF so I can convert a PDF to MSFT Word. I have attempted to do the conversion three times. Each time it has timed out with the message "the conversion failed because the file is taking too l