Password Reset Error

I have a Lenovo 560. I have two passwords - Power-on and Hard Disk.
I wanted to clear both so I went into BIOS setup, under Security and there was only one option highlighterd - Clear User Password. I clicked on it. It then made available "Set User Password" indicating that the password was reset. I saved the settings and rebooted.
But on reboot it still asks for password? I enter the password and it doesn't take it. It doesn't take the password for BIOS either. What went wrong??
Solved!
Go to Solution.

this subject is not allowed to be discussed here as stated in the forum rules.
please contact lenovo support line.

Similar Messages

  • Central Administration not Available, STSADM password reset errors "job-admin-apppool-change" already exists

    Hi Everyone,
    I think I've shot myself in the foot by not properly following set up instructions.
    I have a two-fold problem.  Firstly, my Sharepoint Central Administration V4 site is showing
    Service Not Available.  This seems to be related to the credentials the
    Central Administration V4 Application Pool - hitting Test Settings within
    IIS Manager for the site shows an Authentication and Authorization error for the credentials due to a bad password.
    My reading indicates that I should run something to the effect of:
    %STSADM -o updatefarmcredentials -userlogin DOMAIN\username -password <new password as set via AD>
    This runs into the following Error message
    Error deploying administration application pool credentials. Another deployment may be active. An object of the type Microsoft.SharePoint.Administration.SPAdminAppPoolCredentialDeploymentJobDefinition named "job-admin-apppool-change" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named "SPTimerV4".  Rename your object or delete the existing object.
    I've tried searching out a solution but as yet have been unable to find a mechanism to resolve this error.  I have had a look through http://social.technet.microsoft.com/forums/en-US/sharepointadmin/thread/b7c17dac-1cd1-4f75-a031-e28e4fbfd2f7 but
    it doesn't seem to relate to the same problems - as far as I know the account from which the command is being run is a farm administrator and the problem seems to be the existing job rather than permissions errors.
    Your help will be much appreciated.
    Stuart

    Hi Stuart Weaver,
    Firstly, please check if the SharePoint 2010 timer service is running. If not, please start it manually, then check the effect. In addition to this, you can try to
    run SharePoint configuration wizard, then check the effect.
    Note: when you start the SharePoint 2010 timer service, make sure you input the latest password. The steps are as follows:
    Open services.msc, locate the SharePoint 2010 timer service, double click it, then click log on tab, input the updated password, then click apply.
    Hope this helps.
    Rock Wang
    Regards, Rock Wang Microsoft Online Community Support

  • Upgrade from 3.0 to 3.1 new user password reset error

    hello, we upgraded from 3.0 to 3.1 last friday and have come across the following issue: New users being required to change their password for the first log in are receiving an error message:
    (Error: Item "P50_USER_NAME" was not displayed because the HTML form was not yet opened.Error: Item "P50_ENTER_CURRENT_PASSWORD" was not displayed because the HTML form was not yet opened.Error: Item "P50_PASSWORD" was not displayed because the HTML form was not yet opened.Error: Item "P50_CONFIRM_PASSWORD" was not displayed because the HTML form was not yet opened.Error: Item "P50_SESSION" was not displayed because the HTML form was not yet opened. )
    This is occuring with existing applications as well as with a newly created application (after the upgrade). Also, what's interesting is that if you log directly into apex (the screen with the workspace login, etc....it works fine and directs you to a different URL. Obviously our users wouldn't be accessing this url.) here's the 2 urls just so you can see the application/page differences (4155/50 verses 4350/68)
    This is the URL that end-users are being directed to which shows the error:
    /f?p=4155:50:3096404055109898::NO::P50_SESSION,FSP_AFTER_LOGIN_URL:2551476413459584,f?p=114
    This is the URL that is working when logging into apex directly:
    /f?p=4350:68:984059594353829
    Looks like it has something to do with #form_open# and the template/theme? Any suggestions on how to fix?
    Also, I uploaded an application to apex.oracle.com and it works fine there.
    I've searched the documentation and the forum and didn't come up with anything.
    Thanks for the help!! Melissa
    Message was edited by:
    murkym

    Please tell us your first name and put it into your OTN profile and handle as a courtesy and help to us. Thanks.
    There is a patch for this problem on Metalink for bug 7138068, file p7138068_111060_GENERIC.zip.
    Scott

  • Error during password reset using self-service portal

    I am working in a poc (proof of concept) using oim with ad, exchange, sap and database application tables connectors. During some tests I noticed that password reset through oim's self-service portal works fine for ad, exchange and sap, but it fires an error for the database application tables connector. The odd part is that i can change the user password using web console as xelsysadmin nicely. Also I can change the password when i retried the failed task.
    Any help is appreciated.
    I'm running OIM 9.1.0.2 with BP05 applied, Weblogic Server 10.3.2, Oracle Database 11.0.7. The OS is Windows 2003.
    Log from oim web console
    Resource Name: SOC_GTC
    Description:
    User: poc cassi17 [POC.CASSI17]
    Status: Rejected
    Response: OIM API Error
    Response Description: An error was encountered in the Oracle Identity Manager API layer.
    Notes:
    wnqAd8gmdAhODUFjs4WMyQ==
    Assigned to Group : SYSTEM ADMINISTRATORS
    Log from Weblogic sdout
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],
    java.lang.NullPointerException
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ERROR,22 Feb 2010 20:09:45,187,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
    com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         ... 92 more
    Edited by: aviana on Feb 23, 2010 5:18 AM

    I changed the privileges as recommended, but it did no solved the problem. So I implemented the task retry as a workaround and it worked.
    Anyway, I increased the adapter's log level to debug. Please check the log below.
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],
    java.lang.NullPointerException
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while creating the GenericConenctor Model from the Connector Definition file
    ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.APIS],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'
    com.thortech.xl.gc.exception.ConnectorDefinitionOperationsException: An exception occurred while creating the GenericConenctor Model from the Connector Definition file
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getModelFromConnectorDefinition(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.GCOperationsBean.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperationsSession.lookup(Unknown Source)
         at com.thortech.xl.ejb.beans.GCOperations_do1ndy_ELOImpl.lookup(GCOperations_do1ndy_ELOImpl.java:619)
         at Thor.API.Operations.GCOperationsClient.lookup(Unknown Source)
         at com.thortech.xl.gc.runtime.GCAdapterLibrary.executeFunctionality(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.GENERICADAPTER(adpSOC_GTC.java:125)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOC_GTC.implementation(adpSOC_GTC.java:70)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateDataSetValuePost(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateProcessFormFieldValue(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
         at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
         at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpSOCSETNEWSENHA.implementation(adpSOCSETNEWSENHA.java:55)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
         at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
         at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
         at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcUSR.changePasswordForSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changePasswordforSelf(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperationsSession.changeCredForSelf(Unknown Source)
         at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.changeCredForSelf(tcUserOperations_voj9p2_EOImpl.java:3325)
         at Thor.API.Operations.tcUserOperationsClient.changeCredForSelf(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.security.Security.runAs(Security.java:41)
         at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy59.changeCredForSelf(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.changePassword(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcChangePasswordAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
         ... 91 more
    ***ERROR,23 Feb 2010 19:44:28,531,[XELLERATE.GC.FRAMEWORKPROVISIONING],An exception occurred while generating Generic Connector model from the connector definition xml of the connector 'SOC'***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: class - Value: java.lang.String***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: poRetVal.toString() - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString - Data: Returning:sRetVal - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRetValString left.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal - Data: Setting Adapter Return Value to GCPROV.ADAPTER_OIMAPIERROR - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/setAdpRetVal left.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: Mapped to Response Code - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOC_GTC***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value: GCPROV.ADAPTER_OIMAPIERROR***
    ***DEBUG,23 Feb 2010 19:44:28,531,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
    ***DEBUG,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
    ***INFO,23 Feb 2010 19:44:28,609,[XELLERATE.ADAPTERS],Adapter: adpSOC_GTC has completed for the task: SENHA Updated.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateDataSetValuePost left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateProcessFormFieldValue left.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter - Data: No Response Code specified. Updating milestone status to Completed - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpSOCSETNEWSENHA***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value: C***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,625,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value:***
    ***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem left.***
    ***DEBUG,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/finalizeProcessAdapter left.***
    ***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Adapter: adpSOCSETNEWSENHA has completed for the task: Change User Password.***
    ***INFO,23 Feb 2010 19:44:28,656,[XELLERATE.ADAPTERS],Event: Triggering Processes related to User. has completed.***
    Edited by: aviana on Feb 23, 2010 3:02 PM

  • FIM Password Reset Client Service error 1053 when starting service - what is the minimum permissions set?

    Hi,
    I've installed Password Reset Client Service on a machine with locked down GPO settings. Now, service, running under NETWORK_SERVICE account doesn't start (Service Control Manager reports error 1053 after waiting 30 seconds for the service to respond during
    start).
    If I change service account to some other account (i.e. domain account), service runs fine and I am able to reset password successfully, so there is no issues with password reset infrastructure, firewall, etc..). Problem is only with NETWORK SERVICE not
    having enough permission to do its job.
    Unfortunately, there is no event log entries in neither of relevant event logs (Application, Security, System, Forefront Identity Manager) that would provide additional information on why service doesn't start. ProcessMonitor tracing revealed only, that
    service cannot access some of the registry entries. After granting permissions, service still refuses to start.
    What I'd like to know is there a list of permissions, configuration entries, that NETWORK SERVICE needs in order to run normally?
    If that is not available, does anybody have any idea, how to find out what is preventing NETWORK SERVICE account from running that service?
    Thank you and best regards,
    P

    Fatih,
    The above often solves it because this disabled CRL checking for the account running the service. As the service is the network service, it has no scope off of the box, so the machine account is typically used and many shops have policies in place that prevent
    this. If the above entry doesn't help, try using your account as the service account. If that works, then its probably a syntax problem with above entry. If it fails with your account too then its most likely not CRL checking.  There is
    a registry key that can be configured that could assist:
    [HKEY_LOCAL_MACHINE \System \CurrentControlSet \Control]
    ServicesPipeTimeout = 30000
    Try setting this to another value higher than 30000. This value is milliseconds. I would also look at network capture and verify if we are indeed attempting to go to the Internet during service startup.

  • IdM - Self password reset u2013 Internal Server Error

    Hello
    We are trying to set the self password reset on IdM 7.1 SP4.
    The User Interface and the Identity Center are installed on two different Was JAVA servers. When we try the reset password, it goes along well (authentication) but in the end, when we click on the u201CEndu201D button we get the following message :
    500 Internal Server Error
    Failed to process request. Please contact your system administrator
    And the detailed error information :
    java.lang.NullPointerException
            at com.sap.idm.wd.wf.task.PwdRecoverComp.SaveData(PwdRecoverComp.java:255)
            at com.sap.idm.wd.wf.task.PwdRecoverComp.MoveNext(PwdRecoverComp.java:293)
            at com.sap.idm.wd.wf.task.wdp.InternalPwdRecoverComp.MoveNext(InternalPwdRecoverComp.java:192)
            at com.sap.idm.wd.wf.task.PwdRecoverCompView.onActionNext(PwdRecoverCompView.java:165)
            at com.sap.idm.wd.wf.task.wdp.InternalPwdRecoverCompView.wdInvokeEventHandler(InternalPwdRecoverCompView.java:193)
            at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
            at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
            at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
            at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
            at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
            at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:332)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
            at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
            at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
            at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
            at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
            at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
            at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
            at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
            at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
            at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
            at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
            at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
            at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    We thought that maybe it was because of the two different servers installation since it used to work when everything was on the same server. Did anyone ever tried the self reset password with the same configuration as we have? Or do anyone know if it is necessary for the task to work to have IdM and the portal on the same server?
    Or maybe its a deploying IDMu2019s package problem?
    Regards,
    Clotilde

    Hello
    @Scott
    Make sure you have the correct sca file deployed on the portal from your service pack and make sure that the keys.ini file is correctly set up on the portal.
    About the sca, we deployed the IDMIC04_0-10007482.SCA (SP4) do we also need to deploy the IDMIC00_0.sca? (we didn't)
    About the keys.ini, we deployed the same file in each server.
    @Roy
    Have the user prepared the Authq attributes in the identity store, and you are using the correct answers?
    Yes, we only use the MX_AUTHQ_001 that we fill with the user's MX_PRIMARY_MAIL when we create it. The encryption is ok and we use the correct answer.
    What are your settings on the password reset settings in the Admin MMC?
    The settings are :
    Identification attribute  MSKEYVALUE
    No of question to show 1
    No of answers required 1
    Max no of attempts 3
    Password creation method Automatically generate
    Save the password to UME no
    Which version of the NW are you running?
    7.1 SP4
    Did you deploy the correct version of the webui?
    package SP4
    Could you try to change the loglevel of the defaulttrace on tcidmjmx-app to debug, and add the section of the log
    where it throws an error.
    I tried to do it but I didn't find where I'm supposed to configure that. Could you please help me on that or send me a link to a documentation that would explain it?
    Thanks a lot,
    Clotilde

  • I message error will not connect.appears not to accept password, reset FaceTime and messages now says cannot connect to network???

    II message error not connecting, appears not to accept password, reset FaceTime and messages. Now says check network. Do not know what else to do

    Unable to make or receive FaceTime calls after April 16, 2014
    http://support.apple.com/kb/TS5419
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Set Up Alert Sounds
    http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
    Extra FaceTime IDs
    http://tinyurl.com/k683gr4
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Fix Can’t Sign Into FaceTime or iMessage iOS 7
    http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
    http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457#19087457
    How to watch FaceTime calls on the big screen with Apple TV
    http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Text on the iPad
    http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    How to Receive SMS Messages on an iPad
    http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
    Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Can't download apps after password reset

    Why won't my phone download any new apps after doing a password reset? If I enter the wrong password I get an error message. If I enter the correct password, nothing happens.

    HI,
    *"Or when I try to download a program I get this dark gray screen with a black column in the middle filled with gibberish."*
    If it looks like this... it's a kernel panic.
    Go here for help to Resolve Kernel Panics
    Try downloading and installing the 10.6.2 combo update available here.
    http://support.apple.com/kb/DL959
    One of the fixes: -- an issue that prevented opening files downloaded from the Internet
    After the installation, repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    And try Safari maintenance...
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Safari add-ons can cause performance issues or other situations
    Also, if you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Quit Safari then relaunch.
    While you have the Get Info window open for Safari, make sure it's not running in Rosetta.
    Carolyn

  • Lost password and password reset utility doesn't work.

    Kind of embarassing, but a couple of days ago I decided that it would be a good idea to change my password at three in the morning. Gah!
    I tried using the password reset utility, but it would simply crash upon selecting my drive. I ran it from the terminal and it says that it's getting a bus error. I tried using passwd from single user mode, but it seems as though Apple has decided that that is a bad thing. Same goes for trying to run it from the terminal on the install disc.
    What do I do now? Getting my files back won't be a problem, but I won't have the equipment to do that until I go home, and there are still a couple of weeks left in the semester. Being stuck using my guest account really *****!
    G5   Mac OS X (10.4.6)  

    This will give you root access to your computer:
    1) Reboot into single usermode (Hold "Cmd" + "S")
    2) At the Console # type:
    fsck -fy
    - This should come up OK after a minute, if not run it again
    3) At the Console # type:
    mount -uw /
    4)At the Console # type:
    nicl -raw /var/db/netinfo/local.nidb -createprop /users/root authentication_authority ";basic;"
    - The above should be all on 1 line (this might format it to wrap a line)
    5) At the Console # type:
    nicl -raw /var/db/netinfo/local.nidb -createprop /users/root passwd
    - This will reset the root password
    6) At the Console # type:
    reboot
    7) You can now login with the username root

  • Change Password Screen error in - External Facing Portal

    HI,
    We have developed an external facing portal for anonymous users and the EFP has protected content which will redirect the users to enter logon information to access it.
    The process of authentication also working well in EFP but we are getting some strange error when the password was "reset' by administrator.
    Here is the process...
    1. Password 'reset" by administrator
    2. user clicks on "protected content"
    3. Logon screen displayed
    4. After entering details, should be redirected to change their password but instead of that we are getting "Java iView Runtime error"
    I need expert views on this to solve.
    This is happening only when accessing EFP, user will be redirecting successfully to change password screen when accessing through "/irj/portal"
    Any solution.
    Thanks
    MMK

    Here is the scenario ..
    1. User's password was reset by administrator.
    **That's fine.
    2. User gets redirected to change their password when logging (first time after reset) ... when accessing via .. http://<server>:<port>/irj/portal
    **That's ok too, this is just a redirection.  At this point I would be doing https for external customers though.
    3. Occured "Java Ivew run time error" when the user trying to login from External Facing Portal ... via .. http://<server>:<port>/irj/portal/anonymous?guest_user=partners
    **At this point you will have to look at your .trc log files. (logviewer)   If this is just an access denied issue then look at permissions in the roles or groups.  If you are assigning a new password, is that effecting a group or system membership?  The .trc files will give a heads up.

  • Password reset with external directory not working in realm mode

    I am using SUn acess manager 7 2005 @4 patch 5
    I have configured a realm to point to external directory .I am able to create the user in the subject tab. Able to authenticate to the user in realm and set its security question.
    But when i try to reset the password using /ampassowrd?relam=realmname
    I get an error message Error
    The password cannot be reset for this user.
    1) When i check the logs i find that user is being searched in amconfig direcectory and not the external directory which the realm points to?
    2) Also if i create add in datastrore the amsdk as well and create the user reset it get created in both external directory and amconfig directory?Then i am able to reset the password but it changes only in amconfig directory and not in external directory?
    Can some tell how to make sure that password reset looks at right directory based on relam

    have you had any breakthrough? I am in same situation here

  • Password Reset Issue in Portal

    Hi All,
    Please help me to resolve this issue.
    Issue : We have resetted a password for one srm user in Portal. The User when he tried to login after the password reset initially it was asked to change the password. User changed the password. He is succesfully logged into the portal. Now the problem is when he tries to access a srm work item in worklist it is opening a new window and asking to reset the password again with the error message "No switch to HTTPS occurred, so it is not secure to send a password & This is an initial password that must be changed". It is not asking to change when he tries to login to portal and this error is promting only when he tries to open a work item. Because of this the user could not proceed to work further.
    Can any please let me know if faced with the same error.
    Thanks in advance.
    Regards,
    Viswes

    Hi Viswes,
    There are two solutions for this issue,
    1. Create a custom application which will change PWD in all the systems once you change your Portal PWD.
    2. Change the backend PWD before accessing UWL. (Login to backend system directly, it will ask for change of PWD).
    Thanks.
    Sushil

  • How to implement approval on password reset from OIM 9.1

    I am having an requirement where i need to implement Manager Approval on user's every password reset from OIM 9.1.02.
    Please help me out with your suggestions.
    Thanks,
    Kanav

    The thread was help full rajiv but i am still having some issue in the approch to follow:
    As per the thread we cannot use the Entity Adapter because:
    If you are thinking of using Entity Adapter on User form then it is not possible because whenever you change any value on User form, that will be updated in USR table without any Approval.
    So, if we go with the below appoach:
    *Event Handler Way:*
    Create Event Handler.
    You'll get OLD and NEW Values of that field.
    Capture those values and raise request for thsi Dummy RO with your code
    And use Error Handler to show Custom Message to Administrator that "Request Has Been Initiated for User Profile Modification".
    but i am having below doubts:
    1. If we are not having the Entiry Adapter then where we will do the mapping of fields that have been taken n the adapter?
    2. And how can i get the old value of the filed?

  • Email server password reset

    I have Verizon Email on my phone, ipad, web-based (yahoo/verizon.net) and outlook iook.com.  At one time all were working but I think I reset a password and then only a few worked.  I have tried new password on all, changed back to the old password on others and didn't touch settings on ipad but can't seem to get them all working again.  I would like to start fresh with a password reset so I can set up accounts on all devices again and try to remedy this frustrating issue.  I have most recently reset the password again to try setting up my Email on my phone only to receive  a password authentication error. I have set up before with success so I know I am setting up correctly and just a very frustrating password issue.  I am also OK with deleting my primary Email account and setting it up again within the account if I have to.  I just want this fixed so that I have my personal Email on all of my devices working properly and without frustration!

    try doing one computer at a time.  don't rush it.   have you checked all the settings are correct in outlook.
    I know Verizon recently changed settings for their mail servers.
      incoming should be   -    pop.verizon.net    port 995
      outgoing should be -    smtp.verizon.net   port 465    SSL enabled.
    http://www.verizon.com/Support/Residential/Internet/highspeed/email/setup+and+use/questionsone/86782...
    The following are the settings for setting up and configuring your email, remote access, and FTP access for your home page address.
    User name settings
    Your Verizon Online user name
    Your Verizon Online password
    High Speed Internet (DSL) settings
    Domain: dsl.verizon.net
    Network protocol used: TCP/IP
    Mail server settings
    Incoming mail server (POP3): pop.verizon.net
    Incoming Server Port Numbers: 995
    Outgoing mail server (SMTP): smtp.verizon.net
    Outgoing Server Port Numbers: 465  
    Your Verizon Online user name
    Your Verizon Online password
    Make sure "This server requires a secure connection (SSL)" is checked.
    Remote access settings (Dial-up)
    Domain: verizon.net
    Network protocol used: TCP/IP
    Note: Remote Access is available only if you subscribe to dial-up roaming with your Verizon High Speed Internet service.
    HTH

  • Hp mini 110 bios password reset

    When I turn on my daughters computer it goes straight to bios password, Since i never added a password this is a problem!
    I tried pulling the cmos battery and that seems to have made the problem worse, any help would be greatly appreciated

    Hi,
    Please check your other post:
      http://h30434.www3.hp.com/t5/Notebook-Recovery/bios-password-reset-on-hp-mini-110-error-code-CNU0040...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Outlook Sync with iPod Slow

    I sync my iPod with my Outlook (calendar and contacts) successfully but each time it takes at least 20+ minutes to complete a sync. I can understand it taking a while the first time you sync with Outlook but everytime thereafter? Why would just a few

  • QUESTIONS ABOUT MAC OS INSTALLATION ON SONY VAIO LAPTOP !!!

    +These are my laptop specifications:-+ *Processor Name* Intel® Core™ i3-330M Processor 2.13 GHz *1 Chipset Intel® HM55 Express Chipset *Memory Bus* 1066 MHz *Cache Memory* 3 MB (L3 Cache) _Main Memory_ Pre-installed/Max 4 GB DDR3 SDRAM *2 (upgradeabl

  • How to display attributes as keyfigures in a report?

    hi experts,                i have a master data like ID is ref.char., under the ID attributes are NET and GROSS, when i am generating the report or query these two attributes ( NET and GROSS) should display as keyfigure which means we can drag these

  • TDS is not getting reversed in T.Code:  F-54 -Clear Vendor down payment

    Hi, Please help on the below issue:- 1. We passed one entry relating to down payment for fixed asset.  We deducted TDS also (50% down payment). 2. We passed MIRO also.  There we deducted TDS on full value of invoice amount. 3. While making T.Code:  F

  • Form Personalization error in INV on Kanban Cards Form R12

    Hi, I'm trying form personalization in INV Kanban Cards Form,could you suggest me: 1. Assume that MTL_KANBAN_CARDS table has kanban_card_number='12345' 2. Assume that in the table MTL_MATERIAL_TRANSACTIONS_TEMP , Transaction_Quantity = 50 for above k