Password RESET for accessing BB email setup

Hi there, I have lost a password for accessing setting up email , I need to reset it please what happened I have found this opt on BB email setup to connect to a PC to setup email rather than a handset, I said OK, I set up a user word and password, now I forgot the password, which means I can't enter setup for my email on the handset I need urgent help please Warmly, Michael PS my email: <removed>
MOD EDIT: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
I cannot tell for sure from your description which of these applies to you...
If this is your independent BIS (BlackBerry Internet Service) credentials, then you simply need to ring up your mobile service provider as they manage your BIS account for you.
But, if your provider has merged (as they all are doing) your BIS credentials into your BlackBerry ID account, then your challenge is greater. Start first with these please:
KB28685 How to reset the BlackBerry ID password using the password recovery question
KB24157 BlackBerry ID lockout behavior
KB32111 "The link is no longer valid." is encountered when attempting to reset a BlackBerry ID password
KB26361 How to change or reset the BlackBerry ID password
KB28111 Unable to reset BlackBerry ID password when using a BlackBerry hosted email address
KB28232 BlackBerry ID reset email is not being delivered to the associated mailbox
If you have forgotten your BB ID credentials AND have non-BB access (e.g., Outlook, webmail, etc.) to the email account that is currently configured to your BB ID account, then those instructions should allow you to recover access to your BB ID account, even without the password or recovery question (please read them all carefully to find the section that applies to you).
As a last automated resort, and only if you have the original email you received when you originally created your BBID (it cannot be regenerated), then it should contain a link to actually now destroy your BBID. Then, you create a new BBID, but using the exact same credentials (username, email address), and it is supposed to relink all of your prior BBWorld records (purchases, downloads) and allow you to continue on.
However, if you do not have access to that email account, or if you never properly validated your BBID account, then your challenge is much greater, and you have a choice to make depending on your circumstances:
If you have no AppWorld records, BBM Contacts, etc. that you require to retain (e.g., purchase records for apps), then simply abandon the BB ID and create a new one. To do so, however, does require a device WIPE:
KB26694 How to change the BlackBerry ID on a BlackBerry PlayBook tablet or BlackBerry smartphone
But, if you do have AppWorld records, BBM Contacts, etc. that you must keep, then you require human intervention. To receive that, you must ring up your mobile service provider and convince them to escalate your case up to BlackBerry. Further, you must convince BlackBerry to provide you with a solution -- which likely will either be resetting your current BB ID so that you can again access it or having you create a new BBID and they will manually move your purchase records over. Note that I have no idea if they will be willing to do this, but there is no other way that I know of to retain your prior AppWorld purchase records.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to force password policy requirements on password resets for user accounts reset by the Administrator?

OS: Windows Server 2008 R2 Enterprise
Domain Level: 2008
Forest Level: 2000
We have Domain Administrators in our domain that reset passwords for user accounts, and the passwords the Administrators set them to are not being enforced follow our default domain password policy. For example, I log on the domain controller, as an administrator
and can reset a password for a user account to be blank.
Is there a reason Domain Administrator password resets for user accounts are not enforced by our default domain password policy? Is there a way to enforce this on password resets by Domain Admins?

Do you have fine grant password policy? If not ; by default all the usrs are effected by domain level password policy even domain admins,
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

Password reset for old sbcglobal account - no longer an ATT customer

I have an account from my DSL service that I canceled some time ago. One of the sub-accounts was hacked and is suspended. I never set up alternate contacts for it, so it wants me to call a service rep to have the password reset. Since I am no longer a customer there is no path through the phone tree that I can tell to find someone to make this happen. Is it possible to have the password reset for this account?

Sunflower75 wrote:
I have the same problem... What number did u call? Please help. and everyone else who posted on this thread, and including those who did NOT post to this therad, even if not an active customer, PLEASE, click on the link to the attcustomercare social media team here.. they try to catch what the can, but will always miss someone unless the send a private message, and the agreement says, automated help only after 60 days you are no longer an at^t customer, so these guys are going above and beyond to hep, even though technicaly they don't have to... but they need you to adk them first in the private message, or they won't know to help so.. here ya go:Rethink Possible
Private Message (ATTCustomerCare for account specific help)
Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

Need password reset for hp mini 1101

need password reset for hp mini 1101cnu932bkxrplease help

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Halt... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

Automatic Password Reset for end users

Hello Experts,
I am looking for a password reset facility, where end-users can reset their own password without depending on basis.
we can trigger an password recovery question or trigger to authorised email id to simplify our basis efforts.
Please let me know if you need more clarification about my requirement. I would greatly appreciate your help.
Regards,
Sarvesh

Hi Rao,
There is a good document on this.
Have a look : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502c39b9-02e8-2d10-18a7-d32fade7b18b?QuickLink=index&…
Also, if it's ABAP, why not give access SU3 to them. Only when the user gets locked or forgets password comes to your team.
Divyanshu

Password reset for CM1415cfm colour laser

Hi folks,
I've recently bought a cm1415 printer over a month ago and stupidly setup a password when i set it up a couple of weeks ago, unfortunatley i've tried all passwords that i can think of but to no avail.
Athough i can still print to it i can't access the setup on the network now and would like to change the fax settings.
This printer is only for home/small business use for a four PC network so if someone can tell me how to do a master reset or preferable a workaround so that i don't lose how many pages/toner etc i've used. Worst case scenario if i need a master reset then i will do it if someone can can me how i've looked the documentation but i don see anything if i contact Hp directly and give them my invoice details could they reset it remotley ?.
Any info please.

Hi @kiborg777 ,
I see that you need the reset for the printer.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Need password reset for HP LaserJet M1536dnf MFP the same as others on this forum.

I have the same M1536dnf password problem here, I can't access the settings.
I can't activate the duplex mode without it.
Thanks

Hi @HPFix7,
I see that you need the reset for the printer. I can help you.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Multiple Password Resets for no reason?

Why have I needed to go in and request a password reset 3 times since 9/15? My outlook on my computer and phone have the passwords configured so I know it wasn't me entering in the wrong password to block the account. The first time I got a notifcation saying there was a hack attempt on my account but what about the last two? No notice no nothing. Is there a security issue I should be concerned about? Is this happening to others?

A large number of accounts reportedly had some information stolen a few months back.
From what is reported by Verizon there is some form of account access occurring that has caused them to invalidate some accounts. These should not just reset the account but also CHANGE THE PASSWORD. Of course after you change your password they still might be under attack. Some have reported problems accessing from overseas as Verizon is trying to block these attacks.
SEE http://forums.verizon.com/t5/Verizon-net-Email/Email-Account-Password-Lockout/td-p/744863

Why is wrong birthday information used when trying password reset for apple id

When trying to do a password reset, icloud does not recognize the correct birthday information. The Email used to set up the apple II is no longer active so email reset is not an option.

See Here. Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
AlMc6 wrote:
... had to open a new apple id, but my iphone keeps prompting me to sign on to my old one..
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

Password Reset for AIP-SSM 10

Hi,
i have an ASA5520 with v 7.2(2) running.
but the IPS module spftware is 5.1
when i tried to login to the > session 1
it prompts me for a login and password.
i tried cisco and a few other combinations.. but no luck ,,
how do i reset it ?? also that reset procedure on the docs says its resets password or the user cisco ..
how can i be sure if the user cisco even exists on it or not ?
any help please ???

no man it doesnt ..
the link u specified says it too..
hw-module module slot_number password-reset?This command recovers a password on a Cisco ASA 5500 Series Content Security and Control Security Services Module (CSC-SSM) or the AIP-SSM without having to re-image the device.
Note: This command starts support from IPS 6.0 (ASA 7.2 version) and is used to restore the Cisco CLI account password to the default cisco
hers my ASA and IPS details..
ASA# sh version
Cisco Adaptive Security Appliance Software Version 7.2(2)
Device Manager Version 5.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System image file is "disk0:/asa722-k8.bin"
Config file at boot was "startup-config"
ASA up 22 days 3 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
ASA# sh module 1
Mod Card Type Model Serial No.
1 ASA5500 SSM-10 ASA-SSM-10 B155670DW4
Mod MAC Add Range Hw Ver. Fw Ver. Sw Ver.
1 00xx to 001 1.0 1.0(10)0 5.0(2)S152.0
Mod SSM Apps. Name Status SSM Apps Version
1 IPS Up 5.0(2)S152.0
Mod Status Data Plane Status Compatibility
1 Up Up

Authorizations Required for Accessing WAD and setup an Active RFC

Hi All,
I an having problems for accessing WAD. It says 'You are not authorised to run WAD'. Does any one have idea of what authorizations are required to access WAD. I need to do the set up for information Broadcasting.
Also some help is need for setting up an active RFC server. Can any one specify what attributes are required to setup an active RFC Server.

Hi,
will you be able to provide more specific information.... regarding it........
I need the information as I need to Broadcast a web template...

Bios password reset for HP 6735s (not 6735b) laptop

Recently, I managed to find a replacement board for my laptop however I found out that there was an issue with getting into the systems BIOS as there was a password set and the company I bought that board off had no clue what it was set to.
Now I have tried all of the simple ways like removing the CMOS battery and trying the backdoor password (which I might add never worked) but still cant get into the bios to update it or change the boot sequence. I even requested some information about this issue directly to HP Support and they cant help due to the fact that the software they have to do this only work on 2009 and later models (my machine was built 2008).
I have all the information including the UUID however cant seem to find either a DOS application that will succesfully view or reset the password or anyone that would be able to point me in the direction of such a appliocation.
Before anyone says anything about a reset button or anything that simple, I have tried all that and have no such jumper or switch on the mainboard.

Refer:
http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility?s=ad...
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Creating password reset for helpdesk in FIM 2010 R2

I want my helpdesk to use FIM portal for resetting password.
Helpdesk logs on to FIM portal.
click custom page called password management
Types the account name and get an option to 1- reset the password 2- Reset and send password to manager.
can this be achieved ?
Can some one guide me how to do this
Creating custom page "password management" and other controls like user account name , reset password and reset and send password to manager .
When helpdesk click on reset password , can a WF be called to reset the password in AD ?
Any guidance will be helpful.
AdiKumar

Just this week i implemented such a feature at one of our customers. their helpdesk wants to be able to change all the password reset features which you can do in AD by their own.
I've used Craigs fantastic Powershell Activity to archive this goal, Thanx Craig for sharing this piece of work to us all.
So this solution goes like this:
Create an additional tab with rcdc's on the users UI.
Create a NewPW, doPWReset, ChangePWNextLogon and UnlockAccount Attribute and Binding for Users.
NewPW always holds an default reset PW, but can be changed by helpdesk.
MPR/Worksflow sets default values to any current and new user object for this attribute.
Powershell workflow is triggert on changing any of this attributes.
This Powershell reads the request and target object, determine the current state of the PWReset attributes and do all the appropriate actions with the Powershell AD command.
After this i used the OOB Function Evaluator to reset all PWReset attributes to their default values.
One thing as a little warning, be sure the workflow is not triggert if the FIMService account changed the PW attributes otherwise you get an endless loop, like me in my first tests ;-)
Hope this helps
Peter

Enabling Password Reset for end users

Dear all,
I have enabled the "Get Support" Link in the Logon Page Password reset. We are in EP 7.0 SP12.
I followed the below link
[Enabling users to reset their own password|http://help.sap.com/saphelp_nw2004s/helpdata/en/45/7e6313d8780dece10000000a11466f/frameset.htm]
We want to use the WD Application. I have assigned the action "UME.Logon_Help" to the Anonymous users.
But after the user gives the User id and the email and submits, control stays there itself. No messages are shown.No mails are also sent
Has anyone faced this problem before? Please help.
Best Regards,
Aparnna

Hi,
All those are done. If we enter a wrong mail id we are getting the message "Invalid User Information"
But when we enter the correct user information, the control stays in the same page. And the password is not reset.
In the default trace I saw the following exception
[SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/
System/Security/Usermanagement#Java#An exception was thrown in the UME/ABAP user management connector. Message: {0}.
##An exception was thrown in the UME/ABAP user management connector. Message: {0}.
[EXCEPTION]
{1}#2#BAPI_USER_CHANGE@SIDCLNT100: ID=01, NUMBER=514,
MESSAGE=You are not authorized to change passwords in user
We have a dual stack implementation. We are on EP 7.0 SP 12
Which user's authorization should I change? The communication user id(SAPJSF) or any other id.
Best Regards,
Aparnna

Password reset for mobileme

any idea how to get my mobileme account password reset?

You don't have a MobileMe account - nobody does because MobileMe is closed - but if you have migrated to iCloud then your password is that of your Apple ID (if you have more than one it's the one which is your @me.com address). Go to http://appleid.apple.com and click 'Reset password': log in with your ex-MobileMe email address and follow the instructions.

Password RESET for accessing BB email setup

Similar Messages

Maybe you are looking for