Password reset for mass users

Hi
Please could you suggest whether can we reset password for mass users?

Hi,
No it not Possible through SU10.
you can Do it through Script.
Activate the scripting in you System .
then you need to record the script by doing it for one user and then after the script is done for one user u need to create script for many user by adding a for loop and then play the script.
Thanks
Rishi Abrol

Similar Messages

Automatic Password Reset for end users

Hello Experts,
I am looking for a password reset facility, where end-users can reset their own password without depending on basis.
we can trigger an password recovery question or trigger to authorised email id to simplify our basis efforts.
Please let me know if you need more clarification about my requirement. I would greatly appreciate your help.
Regards,
Sarvesh

Hi Rao,
There is a good document on this.
Have a look : http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502c39b9-02e8-2d10-18a7-d32fade7b18b?QuickLink=index&…
Also, if it's ABAP, why not give access SU3 to them. Only when the user gets locked or forgets password comes to your team.
Divyanshu

Enabling Password Reset for end users

Dear all,
I have enabled the "Get Support" Link in the Logon Page Password reset. We are in EP 7.0 SP12.
I followed the below link
[Enabling users to reset their own password|http://help.sap.com/saphelp_nw2004s/helpdata/en/45/7e6313d8780dece10000000a11466f/frameset.htm]
We want to use the WD Application. I have assigned the action "UME.Logon_Help" to the Anonymous users.
But after the user gives the User id and the email and submits, control stays there itself. No messages are shown.No mails are also sent
Has anyone faced this problem before? Please help.
Best Regards,
Aparnna

Hi,
All those are done. If we enter a wrong mail id we are getting the message "Invalid User Information"
But when we enter the correct user information, the control stays in the same page. And the password is not reset.
In the default trace I saw the following exception
[SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/
System/Security/Usermanagement#Java#An exception was thrown in the UME/ABAP user management connector. Message: {0}.
##An exception was thrown in the UME/ABAP user management connector. Message: {0}.
[EXCEPTION]
{1}#2#BAPI_USER_CHANGE@SIDCLNT100: ID=01, NUMBER=514,
MESSAGE=You are not authorized to change passwords in user
We have a dual stack implementation. We are on EP 7.0 SP 12
Which user's authorization should I change? The communication user id(SAPJSF) or any other id.
Best Regards,
Aparnna

Password reset for background user

Hello
I have not idea as to why the background user (ALEREMOTE) password gets autoamtically re-set. I'm keep getting ERROR during data load as " Logon is not possible - Too many failed attempt.
I would like to know, why and where the password is getting re-set. I checked in RFC connection and where else could be possbile that user ALEREMOTE would have wrong password. How would I check the user level trace or log, to understand where and what is going on ?
Thanks
BI

Thanks Dennis. is this S_BCE_68001402 transaction is correct ? when I ran this transaction, I got a message like mo matching user found. then why it is giving me this ERROR too many failed attmepts - user locked for background userid ALEREMOTE.
Thanks and I would appreciate, if you or anyone can post an immediate message. As this is happening regularly.
BI

Disable password reset for developer users

I want to disable the capability for developers to reset their passwords. Is there anyway to do that?

Hi Eugene - What do you mean by "reset" ? Do you want to prevent developers from changing their password either from the current value to a new value, from the current value to the same value, or to prevent them from doing either? And why? What about the "Reset Password" feature on the login page? That actually performs what I'd call a reset.
Scott

How to force password policy requirements on password resets for user accounts reset by the Administrator?

OS: Windows Server 2008 R2 Enterprise
Domain Level: 2008
Forest Level: 2000
We have Domain Administrators in our domain that reset passwords for user accounts, and the passwords the Administrators set them to are not being enforced follow our default domain password policy. For example, I log on the domain controller, as an administrator
and can reset a password for a user account to be blank.
Is there a reason Domain Administrator password resets for user accounts are not enforced by our default domain password policy? Is there a way to enforce this on password resets by Domain Admins?

Do you have fine grant password policy? If not ; by default all the usrs are effected by domain level password policy even domain admins,
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers

CUP Password Reset funtionality requires users to login using password

Hi All,
CUP Password Reset is requiring users to enter user ID and password before resetting the password. Basically, if a user forgets his password, he needs to enter his password to reset it (in other words, it doesn't work).
Anyone have thoughts on how to resolve this?
I'm running GRC AC 5.3 SP12.
CUP is only password reset functionality.
No LDAP is connected.
User Master Source is SAP UME.
Authentication Source is SAP UME.
Thanks,
Pete

Why not?
You can configure CUP not to require login and use challenge response for resets.
In my opinion this is the least preferrable option, as it requires every user to register and will move support effort from resetting passwords to resetting password questions, which users tend to forget just as often.
It also leaves the possibility for imposters to register (as you don't require a login...) which allows you to reset any password if you're fast enough...
I'm sticking to my recommendation - LDAP authentication is the best option.
Frank.

How to set password expiration for EBS users

how to set password expiration for EBS users .
Regards .

Please follow below steps:-
This is available starting in RUP4.
The script to expire all passwords in the fnd_user table is $FND_TOP/patch/115/sql/AFCPEXPIRE.sql.
It can be executed from SQL*Plus or as a Concurrent Program: sqlplus -s APPS/ @AFCPEXPIRE.sql
or Submit concurrent request: CP SQL*Plus Expire FND_USER Passwords
This script sets the fnd_user.password_date to null for all users which causes all user passwords to expire.The user will need to create a new password upon the next login.
Thanks,
JD

Password reset for old sbcglobal account - no longer an ATT customer

I have an account from my DSL service that I canceled some time ago. One of the sub-accounts was hacked and is suspended. I never set up alternate contacts for it, so it wants me to call a service rep to have the password reset. Since I am no longer a customer there is no path through the phone tree that I can tell to find someone to make this happen. Is it possible to have the password reset for this account?

Sunflower75 wrote:
I have the same problem... What number did u call? Please help. and everyone else who posted on this thread, and including those who did NOT post to this therad, even if not an active customer, PLEASE, click on the link to the attcustomercare social media team here.. they try to catch what the can, but will always miss someone unless the send a private message, and the agreement says, automated help only after 60 days you are no longer an at^t customer, so these guys are going above and beyond to hep, even though technicaly they don't have to... but they need you to adk them first in the private message, or they won't know to help so.. here ya go:Rethink Possible
Private Message (ATTCustomerCare for account specific help)
Did a post have a solution that worked for you? Help other people find solutions faster by marking posts that helped you as an "Accepted Solution". Learn about accepted solutions here.

Need password reset for hp mini 1101

need password reset for hp mini 1101cnu932bkxrplease help

Hi: Please read this post which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/System-Halt... Then... You can: 1. Use the unlock code you generated to enter the BIOS
2. Disable all passwords that are enabled in the BIOS's security menu.
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.

Mass password change for selective User id's ?

Hi,
    Thanks to answer for my last question, really appreciated your help.
My new question:
1.   If I create Mass User Id's by using SU10, pwd's are generated automatically. Is there a way to pick a pwd e.g initpass for all ?
2.   Is there any program available which can be used to reset pwd's for several User Id's as   initpass or something like that ?
Please help. thnx in advance.
Syd.

You can also create an ABAP program which can be used to mass change users passwords.
Here are the functions that will do what you need
SUSR_GENERATE_PASSWORD - Generates a Password
BAPI_USER_CHANGE - You can use this BAPI to change just the password of a user
Here is an example of some abap code. There may be some syntax errors and possible other issues. I just typed this out and didnt check it. Hope this helps
constants: con_comma TYPE c VALUE ','.
data: it_tab TYPE filetable,
        gd_subrc TYPE i,
        v_filename_string TYPE string,
        p_npass like XU400-NEWCODE.
DATA: BEGIN OF itab OCCURS 0,
          dLine(40) type c,
      END OF itab.
DATA: begin of it_Users occurs 0,
          UserID like BAPIBNAME-BAPIBNAME,
          Password Like XUBCODE,
      end of it_Users.
parameters: p_file like rlgrap-filename default 'c:\users.txt' LOWER CASE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*&                   FILE_OPEN_DIALOG METHOD                           *
    CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          window_title     = 'Select File'
          default_filename = '*.txt'
          multiselection   = ' '
        CHANGING
          file_table       = it_tab
          rc               = gd_subrc.
        LOOP AT it_tab INTO p_file.
        ENDLOOP.
        v_filename_string = p_file.
START-OF-SELECTION.
*&                   GUI_UPLOAD function                               *
   Upload file to internal table
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                      = v_filename_string
          FILETYPE                      = 'ASC'
          HAS_FIELD_SEPARATOR           = 'X'
        TABLES
          DATA_TAB                      = ITAB
       EXCEPTIONS
         FILE_OPEN_ERROR               = 1
         FILE_READ_ERROR               = 2
         NO_BATCH                      = 3
         GUI_REFUSE_FILETRANSFER       = 4
         INVALID_TYPE                  = 5
         NO_AUTHORITY                  = 6
         UNKNOWN_ERROR                 = 7
         BAD_DATA_FORMAT               = 8
         HEADER_NOT_ALLOWED            = 9
         SEPARATOR_NOT_ALLOWED         = 10
         HEADER_TOO_LONG               = 11
         UNKNOWN_DP_ERROR              = 12
         ACCESS_DENIED                 = 13
         DP_OUT_OF_MEMORY              = 14
         DISK_FULL                     = 15
         DP_TIMEOUT                    = 16
         OTHERS                        = 17.
      IF SY-SUBRC <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
Loop through internal table and split the comma delimited file
LOOP AT ITAB.
      SPLIT ITAB-dLINE AT con_comma INTO it_Users-UserID
                                       it_Users-Password.
      APPEND it_Users.
ENDLOOP.
LOOP AT it_Users.
     if it_users-Password is initial.
        CALL FUNCTION 'SUSR_GENERATE_PASSWORD'
             IMPORTING
                 PASSWORD = p_npass
     endif.
     CALL FUNCTION 'BAPI_USER_CHANGE'
               EXPORTING
                 USERNAME                = it_users-userid
                 PASSWORD                = p_npass
                 PASSWORDX               = 'X'
               TABLES
                 RETURN                  = it_ret2.
              Loop at it_ret2.
                if it_ret2-number = 039.
                  write: / 'password changed'.
                else.
                  write: / it_ret2-message.
                endif.
              endloop.
              Write: / ''.
              refresh it_ret2.
ENDLOOP.

Password Reset for AIP-SSM 10

Hi,
i have an ASA5520 with v 7.2(2) running.
but the IPS module spftware is 5.1
when i tried to login to the > session 1
it prompts me for a login and password.
i tried cisco and a few other combinations.. but no luck ,,
how do i reset it ?? also that reset procedure on the docs says its resets password or the user cisco ..
how can i be sure if the user cisco even exists on it or not ?
any help please ???

no man it doesnt ..
the link u specified says it too..
hw-module module slot_number password-reset?This command recovers a password on a Cisco ASA 5500 Series Content Security and Control Security Services Module (CSC-SSM) or the AIP-SSM without having to re-image the device.
Note: This command starts support from IPS 6.0 (ASA 7.2 version) and is used to restore the Cisco CLI account password to the default cisco
hers my ASA and IPS details..
ASA# sh version
Cisco Adaptive Security Appliance Software Version 7.2(2)
Device Manager Version 5.2(2)
Compiled on Wed 22-Nov-06 14:16 by builders
System image file is "disk0:/asa722-k8.bin"
Config file at boot was "startup-config"
ASA up 22 days 3 hours
Hardware: ASA5520, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz
ASA# sh module 1
Mod Card Type Model Serial No.
1 ASA5500 SSM-10 ASA-SSM-10 B155670DW4
Mod MAC Add Range Hw Ver. Fw Ver. Sw Ver.
1 00xx to 001 1.0 1.0(10)0 5.0(2)S152.0
Mod SSM Apps. Name Status SSM Apps Version
1 IPS Up 5.0(2)S152.0
Mod Status Data Plane Status Compatibility
1 Up Up

New users with Global Password Policy requiring password "reset on first user login" are still prompted to reset password after entering incorrect password

The setup:
We have the option "Password must: be reset on first user login" enabled in the Global Password Policy on our 10.9 / Mavericks server. We import new user accounts into Open Directory via a delimited text file and include a default password for each user.
What I've observed and tested:
When a user attempts to log into a computer that's bound to our Open Directory for the first time, they can enter anything in the password field and still receive the prompt to reset their password. They are never notified that they entered their default password incorrectly. The password reset will then fail (as it should), but they still aren't notified that this is the reason for the password reset failure. To put it another way: Seeing the prompt to reset your password would reasonably imply that you entered the default password correctly, but that's not the case at all.
The question:
Is this expected behavior? If it is, it doesn't seem logical. If this was the case in OS X Server 10.3 through 10.7 I never noticed it. Can anyone corroborate this with their own setup? Thanks in advance.
-- Steve

Some follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute)

Password Reset and vanishing user account

Here's the situation.
My friend did not know the password to her iMac, so using the install DVD that came with my iBook I booted her machine and did the password reset as per article 106156. However I not only changed the password to her user account, but also to the root account. (I did not actually see the article until afterward which says not to touch root). After both user and root passwords were successfully changed, I rebooted only to find that the user account was missing from the log in menu! Also unfortunate is that I don't have any other boot/repairs disks aside from my system install disk.
I can't quite figure out why that might happen and how to resolve it. The install disk had 10.3 and her machine had 10.2, but I don't think that is the issue.
How do I get the missing user account to reappear?
If worse comes to worse I might try booting the iMac up in target disk mode and try to retrieve the user data if its possible to do so.

Andrew,
This link might help explain what is possible with SAP Portal in terms of allowing the user to reset their password from the logon screen.
http://help.sap.com/saphelp_nw04s/helpdata/en/45/7e6313d8780dece10000000a11466f/frameset.htm
As for allowing a user to unlock their account from the logon page, there is no such functionality that I know of. This would need to be developed. We are doing something similar. In our case, we are developing a module that allows user to retreive their user ID if they forget it. This also is not functionality that SAP provides. The user can specify their email address, and it emails them their user ID. This is being developed in Web Dynpro for Java utilizing the UME APIs.
- Andrew Castillo

Creating password reset for helpdesk in FIM 2010 R2

I want my helpdesk to use FIM portal for resetting password.
Helpdesk logs on to FIM portal.
click custom page called password management
Types the account name and get an option to 1- reset the password 2- Reset and send password to manager.
can this be achieved ?
Can some one guide me how to do this
Creating custom page "password management" and other controls like user account name , reset password and reset and send password to manager .
When helpdesk click on reset password , can a WF be called to reset the password in AD ?
Any guidance will be helpful.
AdiKumar

Just this week i implemented such a feature at one of our customers. their helpdesk wants to be able to change all the password reset features which you can do in AD by their own.
I've used Craigs fantastic Powershell Activity to archive this goal, Thanx Craig for sharing this piece of work to us all.
So this solution goes like this:
Create an additional tab with rcdc's on the users UI.
Create a NewPW, doPWReset, ChangePWNextLogon and UnlockAccount Attribute and Binding for Users.
NewPW always holds an default reset PW, but can be changed by helpdesk.
MPR/Worksflow sets default values to any current and new user object for this attribute.
Powershell workflow is triggert on changing any of this attributes.
This Powershell reads the request and target object, determine the current state of the PWReset attributes and do all the appropriate actions with the Powershell AD command.
After this i used the OOB Function Evaluator to reset all PWReset attributes to their default values.
One thing as a little warning, be sure the workflow is not triggert if the FIMService account changed the PW attributes otherwise you get an endless loop, like me in my first tests ;-)
Hope this helps
Peter

Password reset for mass users

Similar Messages

Maybe you are looking for