Password reset with external directory not working in realm mode

I am using SUn acess manager 7 2005 @4 patch 5
I have configured a realm to point to external directory .I am able to create the user in the subject tab. Able to authenticate to the user in realm and set its security question.
But when i try to reset the password using /ampassowrd?relam=realmname
I get an error message Error
The password cannot be reset for this user.
1) When i check the logs i find that user is being searched in amconfig direcectory and not the external directory which the realm points to?
2) Also if i create add in datastrore the amsdk as well and create the user reset it get created in both external directory and amconfig directory?Then i am able to reset the password but it changes only in amconfig directory and not in external directory?
Can some tell how to make sure that password reset looks at right directory based on relam

have you had any breakthrough? I am in same situation here

Similar Messages

  • Password Reset for Jabber Video not working

    I have a user (Win 7 x64) who has a valid @jabber.com address but forgot her password.  She has gone through the password website several times o assign herself a new password -- still will not log her in.
    We even tried uninstalling / reinstalling the Jabber 4.4 app -- no go.  There is another post with a Windows 8 person getting the same message....this person is runningh WIn 7 x64 which works with other Jabber Video clients in our dept.
    Really like to get this user up and running.  Any ideas?
    Thx

    I checked for background software per your recommendation and did find some software running.  I closed it, restarted Jabber, and the issue still persisted.  I do have another camera, my previous one, with that everything works perfectly fine.  With these new cameras though, it does not.
    I chcekd the stats of the call by clicking on "i", on both sides it shows transmitting at about 698kbit H.264, and receive is 0kbit.  This is the actual, while while signaled is showing 768 for send/receive.
    I decided to try bumping just the receive bandwidth since it looks like it's transmitting fine, just not being received on the other end.  So I tried both clients at 768 transmit, 1.0Mbit receive.  This call failed as well.  I will try a few more scenarios to see what happens.  Something is definitely not allowing it to downspeed properly.  By the way, I have tested this on Jabber 4.5 and 4.6 and the issue exists with both.
    EDIT:  Another weird bit of information, I just set both clients to 512k send/receive and it WORKED!  So it's something to do with 768k or speeds around there.  I tried 767k send/receive just to see if that was the case and it still did not work.  I don't understand why it works at a lower speed and not at 768k.

  • HT4798 Does password reset with multiple Apple IDs work for you?

    I'm using 10.7.4. We have more than one valid Apple ID. Each when attached to one user profile can make use of the password reset feature using the Apple ID. If more than one Apple ID is assigned to a profile it no longer allows either to reset the profile. Is there something that I'm missing?

    Hmm if you've changed your password and go to the icloud preferences, it normally prompts you to input the password.  This didn't happen?  I would sign out of icloud and sign back in.  It'll warn you for some items they'll be removed from your computer, and that's fine.  They'll be stored in icloud and return when you sign back in.  If you want to make sure they're in icloud before signing out, go to icloud.com and sign in.  Poke around there to verify the data is there.

  • Edit with External Editor not working?

    In my iPhoto advanced preferences I checked the box to edit with external editor. When I ctrl click a RAW picture it doesn't open my Adobe Elements? Anybody know why?

    matbran
    Why cntrl click? Try just dbl click.
    Regards
    TD

  • Password Reset Portal SMS Gate Not Working

    trying Microsoft code to enable One-Time Password with SMS Gate, no luck to make it work. Anyone can advise what's wrong of this code? 
    Customer sms gateway requires POST method with 3 parameters: "password", "hp" and "smsmessage"
    namespace Microsoft.IdentityManagement.Samples
        using System;
        using System.Collections.Generic;
        using System.Globalization;
        using System.Net;
        using System.Text;
        using Microsoft.IdentityManagement.SmsServiceProvider;
        using System.Web;
        using System.Security.Cryptography;
        using System.IO;
        public class SmsServiceProvider : ISmsServiceProvider
            public void SendSms(string mobileNumber,
                                string message,
                                Guid requestId,
                                Dictionary<string, object> deliveryAttributes)
                mySMSProvider.SendSms(mobileNumber, message);
        class mySMSProvider
            static string RequestURL = "http://smsgw.abc.com/smsgateway/smsforad.php";
            mySMSProvider()
            public static int SendSms(string userMobileNumber, string message)
                WebClient wc = new WebClient();
                string requestData;
                requestData = Microsoft.IdentityManagement.Samples.mySMSProvider.GetRequestData(userMobileNumber, message);
                byte[] postData = Encoding.ASCII.GetBytes(requestData);
                byte[] response = wc.UploadData(mySMSProvider.RequestURL, postData);
                string result = Encoding.ASCII.GetString(response);  // result contains the error text
                int returnValue = System.Convert.ToInt32(result.Substring(0, 6), NumberFormatInfo.InvariantInfo);
                return returnValue;
            public static string GetRequestData(string mobile, string message)
                string myrequestData;
                myrequestData = "password=" + "password123"
                     + "&hp=" + System.Web.HttpUtility.UrlEncode(mobile)
                     + "&smsmessage=" + System.Web.HttpUtility.UrlEncode(message);
                return myrequestData;
    Jason

    There is some "well known" issue if you put more than one class into the dll. Try to insert all the logic to the SmsServiceProvider class.
    Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

  • I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

    I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?

    I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.

  • How do i reset my apple ID questions with my email not working

    I forgot my apple ID question answers and my reset info email does not work anymore...
    PLEASE HELP        

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a valid rescue email address, then use this procedure:
             Rescue email address and how to reset Apple ID security questions.
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

  • Chieftec blackbox external HDD, not working with GX740 Windows 7.

    Hi
    I have a Seagate Momentus® 7200.4 750GB
                            SATA 3Gb/s, 16MB, 7200RPM, 2,5"
    using it with Chieftec CEB-25S-U3 HDD Chassi
                            2,5", SATA, USB 3.0, Aluminium, Svart/Silver
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    Ive had the same problem with another external hdd, it didnt work on my gx740 with windows7, but it did work on an older computer with windows xp.
    Dunno if it has anything to do with it, but the ENE CIR Receiver doesnt seem to be working in the computer. I dont rly know what it is tbh, but its under the HID Human interface Devices section.
    Tryed to update the driver, but it just says it the latest drivers allready.
    Ive allso had problems with the Bluetooth not working, so maybe the ENE CIR thing is the cause of that =P
    /Snorki

    ENE CIR Receiver is the infra-red receiver for Media Center remote controls (CIR = Consumer InfraRed).
    Quote
    and it doesnt seems like the computer is actually accepting it as a harddrive or something.
    It does find it, but i cant format it or use it as a harddrive, its just there.
    'Just there' where? Is the drive actually partitioned and formatted?
    See: https://forum-en.msi.com/faq/article/how-to-add-a-second-hard-drive-for-storage

  • I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    I am trying to buy music and I keep getting an error stating that my Apple ID has been disabled.  I reset my password but it still does not work.  What can I do?

    Crich,
    The usual reasons for an Apple ID getting disabled are either unauthorized activity or violations of the Terms & Conditions. 
    Submit your request to iTunes Customer Service and if appropriate, they will re-enable it.

  • G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

    G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already,  nothing ,..  Ppc g4 Mac

    Should I check the memory cards themselves? Reseat them?
    Yes.
    Memtest X or Rember to test the RAM.
    Reseat is also good.
    The iPhone 4 doesn't like USB 1.1 much.
    after the update the computer was working well, except for this freeze when ever I connect iPhone.
    I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
    Never an issue.
    Can't say the same for USB 1.1.......
    The above (previous post) linked PCI card is cheap enough.
    Want cheaper, try this:
    http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
    The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
    OS X has native NEC chipset USB support.

  • My macbook pro external speaker not working! help please

    My macbook pro external speaker not working! help please

    1. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
         Pllug in the speakers.
         Do they show up?
         Make sure that Mute is not enabled.
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • I have lost the password and the DVD is not working on my old mac G4 500mhz, how can I get back my password?

    I have lost my password and the DVD is not working on my old mac desktop G4 500mhz. I have tried use the boot up disk to change the admin password. But the DVD did not work. ( I did not touch this machine for years.) But i need retreive something , so I have tried the shell script in the terminal
    1. fsck-y and the mount-uw to try to change and find the service directory's plist to change the password. But after I get the mount -uw, it show illegal option message.
    What I can do now to solve this problem? in shell script or any other way?
    Thx in advance.
    Alfred

    Hi,
    A DVD drive that is not working after many years not used:
    most probably dust on the little laser lens.
    Take the drive out and if you can reach this lens: clean it with pure alcohol on Q-Tip.
    Many people throw away cd or dvd players all the time because they stopped working, and very often it can easily be fixed by cleaning this lens.
    I used to have a G5, where I couldn't access that lens. It was very sensitive to dust.
    I have fixed it several times with compressed air. One time I didn't have canned air, but a bikepump did the trick.
    If you have another mac, I'd try to access the G4 internal disk with firewire target disk mode.
    good luck

  • External monitor not working after ML upgrade

    I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
    There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0  but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
    Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

    OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
    When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

  • The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?

    I advise to reply to the one you want to reply to.
    You have had good information here. I will not repeat that here.
    I would like to add:
    you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
    Akamai is crap software needed or not, Huawei the same.
    It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
    The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
    You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
    Lex

  • I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

Maybe you are looking for