Password Screen, causes random wake up issues and after a call Phone Freezes and needs to be restarted.

I have noticed that the Password Screen is not very robust. I have had numerous times where the phone doesn't bring up the keyboard or the screen comes up black when being "woken up".
I have now noticed that when I am on a long call - speakerphone or using a wired earpiece, that the phone will no longer "wake up". I cannot get to the password screen and the phone is basically unuseable and I need to reboot the phone.
One time this happened where my counterparty had to switch phones and called back immediately. I could not answer his call. I had to do a battery pull. The second time this happened I could at least use the power button to restart the phone.
The password screen seems to cause me quite a few issues.
I would like to know if others are experiencing the same thing.
Best regards,
ctfish

i believe the same thing happened to be. i was thinking that maybe it had to do with the password screen as well but it's weird how it's worked fine for over a month and then BAM.
this morning i wasn't even on a phone call and i looked to wake up my device by swiping up and there is no response. i can't wake it up from the top button either. i can see the red notification light blinking and i can hear when i get emails but i can't do anything. now i'm going to have to just reboot it. holding the top button shows the power off/restart screen. that's about all i can get to. i think i'll try a battery pull this time.

Similar Messages

Accidentally did something to energu saver or sleep-screen is black all the time and have to keep restarting, help!!!

accidentally did something to energy saver or sleep-screen is black all the time and have to keep restarting, help!!!
like to just close the lid at night and open in the am and voila everything is there
during the week I will restart, but not every day!
what should the settings of each area be (sleep, energy, screen saver, wallpaper) be so I can work all day?

try this: PRAM http://support.apple.com/kb/ht1379

I got an iphone from apple store US and am located in egypt , the device has hardware issues and need swap as stated by apple stor belfast when i was in ireland but they cannot swap it in EU as it is purchased from US , please advice

I got an iphone from apple store US and am located in egypt , the device has hardware issues and need swap as stated by apple stor belfast when i was in ireland but they cannot swap it in EU as it is purchased from US , please advice how i can get this swapped without any extra cost on me , this is really frustrating

The warranty is valid in the original country of purchase:
http://www.apple.com/legal/warranty/products/iphone-english.html
Note:
IMPORTANT RESTRICTION
Apple may restrict warranty service to the country where Apple or its Authorized Distributors originally sold the Apple Product.
You will either need to find a local repair shop and pay for it. Or you will need to ship the phone to someone you know in the US and have them take it to Apple for evaluation and then have it shipped back to you. All this will be at your expense. Also note that Apple do not accept direct shipments.

My Administrator password on my personal computer is Forgatten and needs to be reseted

My Administrator Password on my personal computer is Forgatten and needs to be Reseted

What does that have to do with Adobe?
Since you are posting here, it would seem that your Adobe password is working properly

WRTU54G-TM router loses internet connection and needs to be restarted to regain connection.

We recently switched from a WRT54G to a WRTU54G-TM router from T-mobile and the new router seems to randomly lose our internet connection and needs to be restarted to regain it. It could be coincidence but this has happened a couple of times immediately after using our VoIP phone connected to it. I tried switching back to the old router and everything worked fine once again. Typically with the WRTU54G-TM it will stay connected for about a day or so and then it will need to be restarted. Although sometimes it will need to be restarted multiple times in one day. Just curious if anyone had any quick suggestions or setting configurations that I may have missed?
Thanks for your input.
Rylynn

I just added the T-Mobile@Home service and set up a WRTU54G-TM this past Saturday. During the first 4 days, the blue light on the router went out and I lost phone service - until rebooting the router each time. Phone service returned about a minute after rebooting in each case.
I did NOT lose Internet service while phone service was down.
I reached T-Mobile customer care the second time, and the rep I spoke with mentioned that she had a couple of other calls similar to mine earlier in the day. So far, the reps had no official word regarding this problem, and the word going around was simply to tell people to reboot their routers.
Tech Support had about a 20 minute hold queue, so I didn't yet to speak with a technician.
The phone service has been up for the past 2 days -- curious to see how long it holds up this time. Also checking the Linksys site regularly to see if new firmware (beyond the 1.00.04 I have loaded) becomes available - maybe that will address the problem.
When I complained to customer care, the one thing they did was to extend my "buyer's remorse period" to 30 days (instead of the usual 14). So I plan to hang on for another couple of weeks to see if this gets straightened out. I love the service, sound quality and price. Hoping it works out - I want to keep this!
- Jon

TX2Z - 5 days of use: my initial impression, issues and need for advice

Hello All,
I have had my TX2Z for a complete 5 days now. Prior to purchasing, i had a Dell 700m for almost 4 years. When I bougt the Dell, i got it loaded with a 2GHz Intel processor, 2GB RAM, 120GB HDD, XP Pro, etc. It is a brilliant machine and I really enjoyed it...it was good to me and I really can say I never had any issues with it. I took care of it and it returned the favor. I upgraded to Vista Business back in November and it was still great. In fact, I still think it out performs (in terms of speed and stability), most other new laptops owned by my collegues. However, for work, i really needed a tablet and although i read some bad reviews about the TX2Z, i read many more good reviews. So a couple of weeks ago, I called them and ordered a pretty loaded one. I have the 2.4GHz processor, 4GB RAM, Vista Ultimate 64 bit, 250GB 7200 RPM HDD, etc. I assumed it would be quite fast since reviews i read stated the standard 2.2GHz processor was sufficient.
So it came in last Tuesday and I began the migration process. I did a lot of reserach online about what bloatware to remove and did so. Between work and time at home, it took me 2 days to get everything to migrate over from my Dell and install my applications. I partitioned the HD and put my data on the new partition. Outlook migration was quite bothersome to say the least.
I've had a lot of strange issues and had to do a lot of reserach to find fixes but it seems random new issues pop up from time to time. They may be small, but i'm not too technical so I just expect things to work as they did on my Dell for so long.
1. I feel its very slow. When you click on something, like when going through email in Outlook, the email just doesn't show up in the preview pane right away...it takes anywhere from 3-5 seconds...something that was instant before. Same thing when doing many other things...I feel like even web browsing has slowed down. i have defragmented, cleaned, optimized, etc...still inadequate.
2. I feel its very delicate. I've had it freeze on me a couple of times and today, i booted up and logged in and it went to some other profile on the computer with a message stating that there was an issue with my user profile. scared me, but i restarted and then it booted into my profile. then when i booted up again later, it did the same thing! thank God this time it was fine on the first go, but now i feel i have to worry about that every time i boot up...not a cool feeling.
3. I'm trying to get used to the tablet portion of it, but i feel it can be a little annoying sometimes. i won't complain much about it though because I think i need more practice first. i can write pretty well, but drawing on teh screen, the main reason for my using it, isn't that friendly...i always have to put the screen up to access teh keyboard and touchpad to really have what i want happen...i can't just do everything from the tablet.
4. heat: ive seen many people complain about this...it really is annoying how much heat comes out of this thing. i have to keep a folded cloth on my lap so it doesn't bother me.
5. fan: again, another concern i see expressed a lot...very annoying so i try to use only when unplugged and charge when i'm not using it. for the heat issue and the fan...i don't understand why HP doesn't use something else...i mean in this day and age, when they know this is a known issue on other models, why would they use it again?
so that's pretty much all i can think of now. i do like a number of things too, but i really would like advice on the above. i know a lot of you will say just to wipe everything out and start over, but is there any other way to run some tests to see what the issue is? i really don't want to go through another 2 day process. also, if i have to do this, is there a better way to migrate programs and data to an external HD and then back? i just moved my data to an external HD and basically just installed software using discs and internet downloads...took forever!
what about these recover discs i hear a lot aboutt? if i make them now, will they keep all current data and configurations too or just the original OS?
sorry for the long post, but would like some help on what to do. i need to have some confidence built in me about this machine and some reassuracne that i should be happy for the next 2-3 years. TIA.

4. A swipe gesture to the apps screen.
hmmm this is actually a not bad idea!

Blue screen error /Blue screen of death(Your pc ran into a problem and needs to be restart)

Hello,
About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
I use a lenovo laptop,
Processor
Core i3 (3rd Generation)
System Memory
4 GB DDR3
HDD Capacity
320 GB
Operating System
Windows 8
System Architecture
64-bit
Dedicated Graphics Memory Type
DDR3
Dedicated Graphics Memory Capacity
1 GB
Graphic Processor
NVIDIA GeForce 610M
i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
3)Optiminzing the disk drives...
4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
5)in Google search someone told that to update all the drivers. i have also done that
6)i have uninstalled and reinstalled the graphics driver.
So, i have tried all the methods given online,but i didnt get any help from it.
So please help me . I am tired of all this
*Sorry for poor english

Without the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet

Having Kernel Panic issues and need help

So about 6 months ago I had a HD crash, I restored it through disk utility and reloaded from my last time machine backup. Ever since then my computer would turn off randomly and I didn't know why, looked into it a bit more and thought the HD was bad so replaced it with a 500Gb SSD. When I got that I used a HD clone to copy the drive over and the problem still continued. I noticed it was when I would try and do something that might be a little taxing on the system like open a big program or stream something with other things open. All things that might stress the system, but nothing out of the ordinary and never had an issue for the years I had the computer before the crash. I looked into the issue more and have tried to trouble shoot the issue and this is what I have done/found thus far.
~Replaced HD to a SSD HD with no improvement
~Put new SSD in a totally different MCB and the issues still stand
~Reloaded Mavericks on the HD and it is still happening (Had an issue when trying to erase the HD in recovery, Disk Utility said it could unmount the disk when I clicked the drive, but if I clicked that name of the drive indented under neath it worked)
I have included my latest panic log in hopes for some help. The new MacBook Pro that I put my HD in I got second hand and said they were having some issues with it, but it only happened when they upgraded to Yosemite. There was nothing wrong with it previous, so I think I eliminated the possibility of it being a Hardware issue, but not 100% on that. Thanks for the help, Chris
Anonymous UUID:       1AD1A7C2-93C0-FAD0-7F40-200C2FE2B888
Thu Apr 16 11:15:14 2015
panic(cpu 0 caller 0xffffff7f9ed4cf7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff8138cb3000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff8126da2820 : 0xffffff801cc22f79
0xffffff8126da28a0 : 0xffffff7f9ed4cf7c
0xffffff8126da2970 : 0xffffff7f9d626f1b
0xffffff8126da2a30 : 0xffffff7f9d6f050a
0xffffff8126da2a70 : 0xffffff7f9d6f057a
0xffffff8126da2ae0 : 0xffffff7f9d96f056
0xffffff8126da2c10 : 0xffffff7f9d713ba9
0xffffff8126da2c30 : 0xffffff7f9d62d96d
0xffffff8126da2ce0 : 0xffffff7f9d62b478
0xffffff8126da2ee0 : 0xffffff7f9d62cdc7
0xffffff8126da2fb0 : 0xffffff7f9e5923df
0xffffff8126da3080 : 0xffffff7f9e58fa9e
0xffffff8126da30a0 : 0xffffff7f9e591135
0xffffff8126da31d0 : 0xffffff7f9e58f93b
0xffffff8126da3230 : 0xffffff7f9e58f4b2
0xffffff8126da32e0 : 0xffffff7f9e5c1a47
0xffffff8126da3520 : 0xffffff7f9e5bb358
0xffffff8126da3690 : 0xffffff7f9e5bad26
0xffffff8126da36c0 : 0xffffff7f9e5bcedc
0xffffff8126da3700 : 0xffffff7f9e5bc854
0xffffff8126da3780 : 0xffffff7f9e5a4ae0
0xffffff8126da37e0 : 0xffffff7f9e5a53da
0xffffff8126da3830 : 0xffffff7f9e5a5807
0xffffff8126da38a0 : 0xffffff7f9e5a5fc8
0xffffff8126da38e0 : 0xffffff7f9e572fea
0xffffff8126da3a60 : 0xffffff7f9e5a2940
0xffffff8126da3b20 : 0xffffff7f9e571ad9
0xffffff8126da3b70 : 0xffffff801d0cf146
0xffffff8126da3b90 : 0xffffff801d0d0741
0xffffff8126da3bf0 : 0xffffff801d0ce1af
0xffffff8126da3d40 : 0xffffff801ccb6998
0xffffff8126da3e50 : 0xffffff801cc26bc1
0xffffff8126da3e80 : 0xffffff801cc139c5
0xffffff8126da3ef0 : 0xffffff801cc1e013
0xffffff8126da3f70 : 0xffffff801ccc9b9d
0xffffff8126da3fb0 : 0xffffff801ccf4196
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f9ed3e000->0xffffff7f9ed51fff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9ed36000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9d52c000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9d2bf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9d584000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9ed39000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9d5d7000->0xffffff7f9d83ffff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9d2bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9d5c7000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9d584000
         com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 e560000->0xffffff7f9e62afff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9d2bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9d5c7000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9d584000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9d5d7000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9d84a000->0xffffff7f9daf3fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9d5d7000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9d2bf000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x000000001ca00000
Kernel text base: 0xffffff801cc00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 55504763442
last loaded kext at 7373600953: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f9f02c000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleBacklight 170.4.11
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.nvidia.NVDAStartup 8.2.6
com.apple.iokit.IOBluetoothUSBDFU 4.2.7f3
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleFireWireStorage 3.4.1
com.apple.driver.initioFWBridge 3.4.1
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.4.1
com.apple.driver.LSI_FW_500 3.4.1
com.apple.driver.Oxford_Semi 3.4.1
com.apple.driver.StorageLynx 3.4.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

New updates:
I pulled the SSD out and put it into an external enclosure and was able to fully erase the drive through disk utility. From there I used the bootable disk that came with the computer which put snow leopard on. From there I upgrade through the app store to Mavericks, I used the computer all night with no issues or reboots at all, was finally able to run a Hardware diagnostic with nothing showing up there after the extended test. I am now running Mavericks and am transferring data off my external, but only the essentials such as music and pictures with fresh installs of all applications. Everything was going great... until about 5 min ago. As I was transferring about 250Gb of music I opened a browser and had a kernel panic shutdown. I have included the log, hoping it was just a fluke thing, but don't have any faith at this point
Anonymous UUID:       8868F186-3286-3710-DF98-3AC5AC25521D
Fri Apr 17 13:15:10 2015
panic(cpu 3 caller 0xffffff7f95042f7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff812eb65000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff8115523140 : 0xffffff8013a22f79
0xffffff81155231c0 : 0xffffff7f95042f7c
0xffffff8115523290 : 0xffffff7f955cef1b
0xffffff8115523350 : 0xffffff7f9569850a
0xffffff8115523390 : 0xffffff7f9569857a
0xffffff8115523400 : 0xffffff7f9590c056
0xffffff8115523530 : 0xffffff7f956bbba9
0xffffff8115523550 : 0xffffff7f955d596d
0xffffff8115523600 : 0xffffff7f955d3478
0xffffff8115523800 : 0xffffff7f955d43f6
0xffffff81155238e0 : 0xffffff7f95ad19c2
0xffffff8115523920 : 0xffffff7f95ae137f
0xffffff8115523940 : 0xffffff7f95b0f33b
0xffffff8115523980 : 0xffffff7f95b0f39b
0xffffff81155239c0 : 0xffffff7f95ae6e15
0xffffff8115523a10 : 0xffffff7f95ab2b5e
0xffffff8115523aa0 : 0xffffff7f95aaeae7
0xffffff8115523ad0 : 0xffffff7f95aac636
0xffffff8115523b00 : 0xffffff8013ece793
0xffffff8115523b90 : 0xffffff8013ed068f
0xffffff8115523bf0 : 0xffffff8013ece1af
0xffffff8115523d40 : 0xffffff8013ab6998
0xffffff8115523e50 : 0xffffff8013a26bc1
0xffffff8115523e80 : 0xffffff8013a139c5
0xffffff8115523ef0 : 0xffffff8013a1e013
0xffffff8115523f70 : 0xffffff8013ac9b9d
0xffffff8115523fb0 : 0xffffff8013af4196
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f95034000->0xffffff7f95047fff
            dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9501e000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f948ef000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f940bf000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f94f75000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9502f000
         com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9557f000->0xffffff7f957e6fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f940bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f95021000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f94f75000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f957e7000->0xffffff7f95a90fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9557f000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f940bf000
         com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 5a91000->0xffffff7f95b5bfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f940bf000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f95021000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f94f75000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9557f000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide:     0x0000000013800000
Kernel text base: 0xffffff8013a00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3928977613593
last loaded kext at 536453409342: com.apple.driver.AppleFireWireStorage 3.4.1 (addr 0xffffff7f95cb0000, size 16384)
last unloaded kext at 654355152584: com.apple.driver.StorageLynx 3.4.1 (addr 0xffffff7f95382000, size 8192)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1
com.apple.iokit.IOFireWireSBP2 4.2.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSurface 91.1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1

In incoming calls phone freezes and reboots

Hi
I got my Jelly Bean 4.1 update and whenever there is an incoming call, my Galaxy Nexus phone freezes and reboots when the caller ends the call. Is this a known issue? What can I do to have this issue fixed.
Thank you

Got it fixed. Remove the 4G card out and put it back after ten seconds fixed the issue.
Thanks.

My iphone is getting blackout and need to be restarted

my iphone 6 is getting blackout and nee to be restarted! this problem started yesterday and it is continuing

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not work, connect to your computer in recovery mode, explained here:
If you can't update or restore your iOS device

Random shut down issues and more, apple recieved puter today, on hold

Ok so i have all the signs of a bad logic board or messed up puter. Mooing, random shut downs, dies during screen saver, and dies when lid is closed. I sent unit in yesterday, they got it today. Website sai on hold for infomation. So I gave them a call. They said they reseated the ram and its working and what else was wrong. I told then the mac genius did this twice and did all the other reset, then i got it home and it died again. There gonna start running more tests on it, i told her to tell the tech of the terminal thing to do to cause shut downs. ANd i told her of this post. She was extreamly nice to me and said there going to take care of me. they have had it for one afternoon, so i cant yell yet. I did ask that they replace the unit and send me a new one, she said they will run a more tests and go from there. I pointed her towards this forum as im sure many of you have and she said there going to and have been checking it out. So I guess there ontop of the issue. My bigest fear was getting the unit back andhaveing same problems. But hey thats what customer service is for so ill give applecare there fair chance first. Ill keep ya updated.

here another scientist.
Firmware is reversible by reflashing it ... it just
need another set of istruction in binary package.
My ISSUE is related ONLY with firmware,
mathematically.
Actually that's only partially true. It's only reversible by reflashing if someone has released the "reflash" package, which Apple has not. And so long as the changes it made allow a rollback of sorts. Many firmware updates will very clearly state that they can not be removed or undone. So... in your case, the previous poster was correct... it is impossible, through software to reflash your MacBook firmware
Go ahead and try to even reload the firmware, your MacBook knows it is already updated and will not allow the firmware to be reflashed.
Please, put your energy towards some other project, the SMC Firmware update, no matter how "coincidental" the timing of your RSD was, is not the root cause of the RSD.
BTW - I will echo the same comments about your experience with the so called Apple Genius, he's a tool
Call Apple or go to the Store and speak with someone else, in fact ask the Apple Genius if he is familar with the MacBook Random Shutdown. If he is not, ask to speak with one that is. The Apple Genius I spoke with was indeed familar with the problem and was simply great in processing my repair. Every instance so far has been related to a hardware problem.
Good luck
Greg

My iPad has started to sign out of all applications and go back to home screen is this an known issue and can this be fixed??? :(

My iPad is only a few months old but lately when I click on any applications its closes out and goes back to the home screen. This is driving me mad, because I do love my iPad, but now its seriously making me question why I bought it. Please help

Have you used any sort of "tuner" software? You are obviously an advanced user. Sometimes we hack things up and forget about it later. If you are sure you didn't do that, maybe poke around with IPv6 settings. Supposedly people are trying to enable that and it is going to be a disaster.

My sister has changed a setting on her ipod that makes it speak. I got past the password screen once but could not scroll to accessibility. Now i cannot get past the password screen. I have tried resetting and restoring but neither is working.

How do i turn the voice off??
A little padlock with a circle around it has also appeared next to the battery symbol

Connect the iPod to its syncing computer and then go to he Summary pane for the iPod in iTunes. Click on Configure Universal Access and turn Voice Over Off.
The padlock is that the screen rotation lock is one. To turn off, doble clcik the HOme button and go all the way to the left on the Dock row past the music controls and tap on the padlock in the circle arrow.

&, &&, and @s causing ORACLE Database Project issues And SLOW Run

Hello I am encountering an issue while "Run"ing functions/sp/packages from an ORACLE DATABASE PROJECT.
We are supporting a legacy application that utilizes HTP.PRINT. We decided that it would be nice to have it as an Oracle Database Project but when we save the file it is croaking at us.
We are using
ODTwithODAC1110720
Visual Studio 2008
Oracle 10g r2
The specific issue happens when an @ is the first line in the file and when utilizing && in javascript (all being emitted from HTP.Print). Now I know we can work around these limitations (escaping the &s and wrapping the line) but is there any way to get these to work in the IDE w/o the escaping and such?
For instance:
In visual Studio Create a Function1 as such
DROP FUNCTION FUNCTION1;
CREATE FUNCTION FUNCTION1 (
PARAM1 IN NUMBER) RETURN NUMBER IS
BEGIN
HTP.PRINT ('    if (popupStatus == 1 && okDisabled==false) {');
         htp.print('
<style>
@media printfooter; {
}   etc etc etc   ');
RETURN PARAM1;
END FUNCTION1;
/You will get this result:
Connected.
------ Running '***\Project1\Functions\Script1.sql' @**.** ------
Function dropped.
SP2-0310: unable to open file "media.sql"
Enter value for okdisabled:
Operation canceled by user
-- this locks the file
If I go ahead and hit OK (in a new unlocked file)
SP2-0310: unable to open file "media.sql"
Enter value for okdisabled: old   5: HTP.PRINT ('      if (popupStatus == 1 && okDisabled==false) {');
new   5: HTP.PRINT ('      if (popupStatus == 1 ==false) {');
**/You will notice that when the function is created it just skips the & and @s
FUNCTION FUNCTION1 (
PARAM1 IN NUMBER) RETURN NUMBER IS
BEGIN
HTP.PRINT ('    if (popupStatus == 1 ==false) {');
         htp.print('
<style>
}   etc etc etc   ');
RETURN PARAM1;
END FUNCTION1;and just a little insult to injury on this, each "run" takes upwards to 20-25 seconds from Visual studio (this is a deal breaker for us to use the tool -- when SQL Developer takes mere moments) -- is there a configuration setting awry?
So I guess the questions are these (sorry for the ramble)
1) How, in the VS 2008 IDE, can we accommdate & and && and @s without escaping/workarounds? (these work fine in developer)
a) I have noticed that the escape character work around is ONE way ... thus if I have the package body in the Oracle Database Project, add "set escape \ " then escape all of my & and && and @s it works. but... the code is saved in Oracle without the escape characters (understandable) but if it changes in Oracle then I push the changes down I lose all of my escape characters.
2) Why does each RUN take so long? working in developer & even the Server Explorer edited function are almost instantaneous.
-- I want to add, during my escape character tests EACH RUN took upwards to 30-45 seconds, so for 4 small simple test cases it was approaching 2 minutes of just save time...
so far these two shortcomings are barrier for our company to utilize these features (it's hard to try to sell the dept. on anything that doesn't handle escapes well AND -- the big AND -- takes entirely too long to save). any advise?
thnx
Edited by: tanging on Jul 1, 2010 4:47 AM

we can just set the escape character and it works fine,
set escape '~'
create or replace ....when/if we have to pull down from production level we'll have to be mindful to change & and @s to have a preceding escape character (and add the set escape to the top) --> which is a step back from SQL Developer which handles this flawlessly.
now the timing -- I believe it to be a timing issue on our network (therefore I've wasted your time). We have a default shared drive that is anything but speedy and our "default" homes in Visual Studio pointed to the shared drive. While the project/solution were on our local drives - the temp drive was the slow default. Changing that locally seems to have made the timing issue go away. (although on the first save of the body spec after the change and reboot it took 35 seconds but on subsequent runs it Ran in acceptable time limits).

I am having an issue and need to speak with a customer service rep.

I resently bought a Sony TV, it came with the TV the remote and batteries, a reference guide witch nothing was packaged, I also recieved the stand but no screws or hardware. I spoke with a rep ( Fermin) who gave me wrong info and sent me 1 screw, I then called back and spoke with another rep ( Eco) who was helpful in finding the parts and hardware that I needed, but what I recieved was the screws but no brackets ( witch ia called the neck). I called again and spoke with James who transfered my to Mel who told me she ordered the brackets for me and said it is to be expodited for a 2 day shipping, witch should have gotten here yesterday ( 8/6/15), but no shipment. I then called again today and spoke with Stewart who was able to tell me that the part was not in stock and I would have to wait another 7 to 10 business days. This is not fear for a customer to go though this on a TV that was manufactured in April 2015, I need to speak with someone on this issue being it is still not resolved, I also need some kind of compensation on this matter being I cannot return this TV given the time I have spent with Sony. I have a reference # E61563317 to back up all of my claims. I wish to be contacted on this matter or I will go public cause I am very upset at this.

Hi Josh,
Yes. This issue was resolved.
Thanks,
Colleen
COLLEEN GIBSON|Presidential Associate, Public Relations and Global Social & Digital Marketing
Bobbi Brown Cosmetics | 575 Broadway, 4th Floor NY, NY 10012
TEL: 646.613.5937
[email protected]<mailto:[email protected]>
cid:[email protected]
Follow Bobbi at: www.everythingbobbi.com<http://www.everythingbobbi.com/>
Follow us on Twitter: @BobbiBrown
Become a Facebook Fan: www.facebook.com/BobbiBrown<http://www.facebook.com/BobbiBrown>
Visit ELCPress.com for High-Res Images & Press Information

Password Screen, causes random wake up issues and after a call Phone Freezes and needs to be restarted.

Similar Messages

Maybe you are looking for