Password Vault for Windows 7?

Hello,
I have installed Windows 7 RTM on my laptop. I've downloaded all the Lenovo ThinkVantage packs and utilities that I think I need, but the password vault does not appear to be installed or working. I did install the Fingerprint Reader driver, and have enrolled my fingerprints, but I am not being prompted to save username/password at websites, and the Windows logon screen still shows the default MSGINA, not the Lenovo fingerprint logon.
What have I missed?
Thanks!
-Christian

Christian,
Try going to the Fingerprint Software Settings and check-mark the box that says "Use fingerprint scan instead of password when logging into Windows." This will allow you to use the finger scaner to log-in. As far as saving user names and passwords, you will need to download the ThinkVantage Client Security Solution:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-46391
Unfortunately Windows 7 is not yet supported.
Does anyone have a link to the beta ThinkVantage Client Security Solution for Windows 7?

Similar Messages

ThinkVantage Productivity Centre/Password Manager for Windows 7 Beta?

Hi, i've noticed that there's no beta build of ThinkVantage Productivity Centre for Windows 7 Beta. Is Lenovo intending to release one?
But most important of all(my main question actually), is that can Password Manager be made available? I found it quite useful in Vista and would realy appreciate the availability of it for Windows 7 Beta

Christian,
Try going to the Fingerprint Software Settings and check-mark the box that says "Use fingerprint scan instead of password when logging into Windows." This will allow you to use the finger scaner to log-in. As far as saving user names and passwords, you will need to download the ThinkVantage Client Security Solution:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=migr-46391
Unfortunately Windows 7 is not yet supported.
Does anyone have a link to the beta ThinkVantage Client Security Solution for Windows 7?

Password reset for windows

My daughter has created a weird password for this mini computer and now cannot remember. I am not sure what information you need in order to assist, but please assist because it is needed.

If your daughter has forgot windows password then she can reset it. She can try troubleshooting steps to reset windows password given in below link:
http://windows.microsoft.com/en-in/windows/what-do-forget-windows-password#1TC=windows-7

Password Recovery for Windows XP Pro

I have recently found a Dell computer in my house that is in good working condition. After setting the computer up, I asked the original owner what the administrator password to the login was. Sadly, the owner doesn't remember the password. I have tried logging in through safe mode and pressing ctrl+alt+del twice and trying to log in then. These tries didn't work, and I have been scavenging around for any password recovery tool I could use. On my recent trip to Best Buy, I informed one of the employees about the problem I had. To solve it, he said to restart the computer and while it was loading, continually press the F8 key, which should log me in as Administrator and could reset the password from there. I have tried this, but failed, most likely not sure if I did it right.

I hope this doesn't come off as mean/offensive, but if you don't have a higher level of computer knowledge, doing an account password reset isn't the easiest thing in the world.
Your local Geek Squad, or any repair shop, should be able to remove the password for you for a fee(call around to see what it is, when I was in store it was $29.99).
There are password removal tools out there, but it requires downloading a disk image, burning it, and getting the computer to boot off the disk into a command prompt environment. It's not "hard" but if you don't know what you're getting into, it's easy to mess things up.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Acrobat XI Pro for OSX can't open password-protected pdfs created using Acrobat 9 Pro for Windows

I am having problems opening password-protected files created on a PC using Acrobat 9 Pro. I am running a MacBook Pro OSX 10.8.4 with Acrobat XI Pro. When I attempt to enter the password when prompted, a dialogue box pops up saying that I've entered the incorrect password. After many attempts, I am certain that the password entered is correct -- this is reinforced by the fact that i am able to open the same document using Mac's Preview software.
Any assistance would be appreciated!
Thanks.

I was suddenly having the same problem in Acrobat XI Pro for Windows (recently upgraded to CC from Acrobat X). For the past while I've sometimes had to use the "insert from file" tool to get a page added from another file. I couldn't figure out why dragging sometimes would no longer work, but was too busy to go looking for a solution until tonight.
The solution was given by JoshTatum24 above. Switch from a scrolling page display to single page display. Now I can drag pages between documents again. THANK YOU Josh!
Oh, and CORREAdmin, it does not matter whether the hand or arrow selection tool is active, my mouse pointer is always an arrow when positioned in the page thumbnails panel. Switching selection tools does not make a difference in dragging, but switching between scrolling and single page display definitely DOES make the difference.

For printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC

Dear All
for printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?

What Windows OS are you using? Are you networked?
If you are networked, you have to setup your file and print sharing options in order to require password assess. If you are just trying to control specific files from being printed, you can do that, too.
If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access.
Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
If I have been helpful, a Kudo is always appreciated.

Username and password for Windows doesn't work for Safari

I just installed Safari 3.0.3 for windows under WindowsXP on local machine. But I have problem access local IIS.
Here is what I did:
1. type http://localhost in Safari
2. I get a pop up login window says "To view this page, you need to log in to area localhost on localhost:80",
3. I entered my username and password to Windows, then "Enter"
4. The pop up window comes back, it says "the name and password entered for are localhost on localhost:80 is incorrect."
I don't see this problem in IE or Firefox on the same machine. In Firefox, it pops a similar window ask for username and password, I entered the same username and password to Windows, it works. But in Safari, it doesn't.
I am wondering if anyone knows how to solve this problem. thanks.

Hi,
i've couple of ideas that might help...
1:
just wandering are either of you guys accessing the internet via a proxy server? if so i suspect that Safari is not by bypassing local addresses and hitting the proxy server first.
if this is the case, Safari should respect the same settings that IE does, so try setting IE and/or FF to bypass the proxy for local address/servers - and see if Safari now works...
2:
also, the text box that ask's you for your password, does it say on it somewhere, something like, "password will be sent clear" or "password will be sent encrypted"
i seem to get a similar problem, but with accessing our work ISA server, my localhost is fine btw. Anyway it might be the case the safari is trying to send a clear text password to an encrpyted password request or vica-verca (sp?) - soooo try setting your IIS to accept clear/basic authentation as well at NT Auth/Encrypted
ok, hope that helps, and make sense

How to Enable password saving in SAP Logon for Windows

how to Enable password saving in SAP Logon for Windows

Even though password saving, in SAP Logon for Windows is disabled by default, this can be enabled following the steps listed below:
    Open the command prompt by navigating to Start → Run and by typing “cmd”.
    Go to the \SAP\FrontEnd\SAPgui directory (in Program Files), through the command prompt.
    Create the necessary value in Windows registry by typing: sapshcut -register An information message will appear.
    Open the registry editor, in order to access Windows registry, by navigating to Start → Run and by typing “regedit”.
    Go to the HKEY_CURRENT_USER\Software\SAP\SAPShortcut\Security registry key.
    Change the value data of “EnablePassword“ from 0 to 1.
    Close SAP Logon and open it again, in case it was open during the whole process.

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I o

Hello, I've got a Upgrade-Version of CS5.5 for Windows and changed to a Mac. Now I need the Mac-Version. I tried to install the Download from Adobe. Unfortunatly it didn't accept my password. I guess cause of the Upgrade-Version or the Windows Version I own. My System: Mac OS X 10.6.8, 2,8 GHz. Thanks for answers! Greetings, Eva

Here is a link to the info regarding platform swaps.
Order product | Platform, language swap
If you want to try to contact Adobe support to try to get an exception, Start Here after selecting relevant responses choose "Still need help? Contact us." and the chat contact (or phone) option.

Audit Vault Server 10.3 for Windows

Hi
Do any one is having link for downloading the Oracle Audit vault server for Windows.
I do have agent of 10.3 but i want server..
Regards
Kay

Hi Kay:
The Audit Vault Server 10.3 has not been made available on Windows. You should contact Oracle Support if this is critical.

Audit Vault server for Windows?

Forgive my ignorance, is there a version of Audit Vault Server for Windows? I haven't been able to find a link for it, just for the Agent.
Thanks!

So there is a Windows version somewhere, it's only that I haven't found it. When I go to the download page http://www.oracle.com/technology/software/products/auditvault/index.html, all I see is:
Oracle Audit Vault Server (10.2.3)
Download for Linux x86 (930,289,516 bytes) (cksum 1842170548)
Download for Linux x86-64 (1,106,767,762 bytes) (cksum 314005762)
Download for Solaris Operating System (SPARC) (64-bit) (1,189,201,196 bytes) (cksum 2466057202)
Download for AIX5L (1,880,746,261 bytes) (cksum 3844667670)
Download for HP-UX Itanium (1,715,251,924 bytes) (cksum 3230968629)

Password History Validation - ACS for Windows 4.2.x

Hello,
I'm evaluating the Secure ACS for Windows v4.2 platform against PCI DSS v2.0, specifically the "Implement Strong Access Control Measures" section.
We currently run version 4.0(1) Build 27 and use local user and password management.
For a variety of reasons I'd prefer to maintain this approach rather than pursue integration with an external identity store such as AD, but I need to know whether or not the in-bult password validation options are stringent enough to meet all of the relevant requirements.
I believe from the research I've done so far that version 4.2.x should meet the majority, but there is one in partiuclar about validation of previously used passwords that I'm still unclear on.
In the "Local Password Management" section of the ACS 4.2.1 User Guide (Text Part Number: OL-20208-01) it states that the password validation options include "Password is different from the previous value".
The PCI standard states: "Do not allow an individual to submit a new password that is the same as any of the last four passwords he or she has used."
Q) How many previous passwords is the newly submitted password validated against? Is it just the last one or will it check against more? Is there any way to configure how many it checks against?
Any help or guidance very much appreciated.
Cheers,
Nick

Hi Lomon,
After login in to ACS application. You can click on the Cisco logo on top left... You can find the patch version.please refer the below screen shot.
Please do rate if the given information helps.
By
Karthik

Failure to install Creative Cloud Master for Windows

Hi all,
I am using an Enterprise Creative Cloud and have packaged the Adobe CC Master for Windows.
I have followed the rules of installation by installing Acrobat XI first.
Upon installation of Acrobat, I proceeded to install Creative Cloud by going to the Build folder and install the Setup.exe by running as an Administrator. I have also disabled my anti-virus scanner as well. It starts to scan my harddisk and there is a progress bar that displays. Mid-way down the installation process, it just stops installing and it immediately uninstalls by displaying the progress-bar back to the start.
Why is this so? I understandthat by having an Entreprise account does not need you to go by the normal way of going to the Creative Cloud Manager to download and have a password to type in right?
Can anyone help me?
Thanks!

Hi Romit Sinha,
Thanks for your prompt response.
For some strange reasons, after I restarted my computer, disabled my anti-virus again and run the setup.exe using the administrator rights, it manages to install the CC apps within the build folder.
However, may I know how do I install both Edge Reflow and Edge Code? As I am using an enterprise edition, I don't see these 2 products within the Build or Exclusions folder. Must I log in to the Creative Cloud (using my Adobe ID and password) to download them?
If I log-in using my adobe account, will Adobe start charging me which will be ludicrous as I already have an enterprise edition.
What gives?
Thanks and Regards

Jabber for Windows- VM issue

I had configured Jabber for windows in windows 7, the problem is after logging into jabber client iam not able to get the "phone accounts" under options.
Iam able to call , and recieve calls but no voice mail. In the Jabber cleint diagnostic it shows username and password is wrong for voice mail.
If i have 'phone acounts' option in jabber client i could set username and password for voice mail. Iam able to telnet the unity server.
Any clue?
We have IM&Presence 9.0, CUCM 9.0
Jabber - 9.2
Tnx
Bobby

HI,
As Aron states - you can configure your client to use same login and password ID as other UC services. This will then mask the fields you see in your jabber client. This is great when you don't want your users to have to populate the fields. The less they have to do the better.
Check your Unity Connection system - is it AXL ot AD or neither ?
If you can, your better to use only one username / password across your UC environment. For now just check your setting for the VM service is not set .

Password Vault for Windows 7?

Similar Messages

Maybe you are looking for