Password was not setup correctly during DBUA upgrading
Hi Experts,
I was using DBUA to upgrade our system from 11.2.0.3 to 11.2.0.4.
There was one step to setup the password, I think I accidently put an extra "Enter" or "Space" in the end of the password.
DBUA prompted a warning:"You have a invalid password, there was an invalid charactor in the password" during the upgrading.(I don't quite remember the exact wording. But that's basically what it meant.) This warning/error makes the last step show one of the component was failed to be upgraded due to the invalid password.
However, I used "select comp_name, version, status from dba_registry;" to check, and all of them are valid and up to date.
Should I worry about the failed job?
Thanks,
>Should I worry about the failed job?
NO!
subsequent testing will reveal some error, then password can then be corrected.
Similar Messages
-
Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2 -
While having a perfectly running iTunes and all programs associated, I was notified of the iTunes 10.4 upgrade. After following typical directions, I have had nothing but trouble. First “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5)” occurred. Following directions found at https://discussions.apple.com/message/15087646#15087646, I now get the following “iTunes.exe - System Error The program can't start because AVFoundationCF.dll is still missing from your computer. Try reinstalling the program to fix this problem.”, Along with “iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)” I am running Win 7 Ultimate 64 bit on HP TouchSmart tx2-1275dx. I was one week away from buying an iPad but not if this is what I have to deal with. Please help
I actually managed to resolve this on my own by downloading iTunes from the Apple website and reinstalling iTunes that way. Here's the link: http://www.apple.com/itunes/download/ That should fix your problem. Good luck!
-
I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.
I too had this problems (Windows 8.1). A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
Today I fixed the problem by:
Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
Uninstall ALL Apple Software using Control Panel / Programs and Features. I uninstalled:
iTunes
QuickTime
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Bonjour
Delete the folders:
C:\Program Files (x86)\iTunes
C:\Program Files (x86)\Common Files\Apple
Restart the computer
Reinstall QuickTime
Reinstall iTunes
Everything works GREAT now, including the iTunes store. You will not lose your media files, I got everything back, all my settings, playlists, etc. -
Itunes was not installed correctly please reinstall. :(
After upgrading itunes it says ' itunes was not installed corectly please reinstall so i uninstalled everything apple : bonjour apple application support , quicktime ....., than installed itunes again nothing ! same message i'v tried dowload microsoft.net framework didden't help. I noticed that quicktime isent working either it says ' please install apple aplication support so i downloaded winrar opened the setup from itunes and installed apple aplication support . Now after a week itunes still says ' itunes was not installed correctly please reinstall and quicktime still says ' please install apple aplication support. I'm 14 and from Belgium so i don't understand the really complicated told selutions but i do understand if you could explain it in steps ! please help me my ipod was conected to my pc when this all happend so it deledet all my music on my ipod please please please help me !
After searching on line, it seemed that this was a compatibility issue, and I might need .NET 3.5, which in turn seems to be part of SP2, but my autodownloads failed and the patch for downloading SP2 failed to install also.
Yeah, that'll be our issue. We'd better get you up to SP2 ... without it, you won't be getting any security updates now, so you'll possibly be a wee way behind on that front. (In the grand scheme of things, that's probably the more significant problem.)
Are you able to get SP2 in if you do a manual download of the System readiness tool? There's instructions for that in the Information for Advanced Users section of the following document:
[Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, for Windows 7, and for Windows Server 2008 R2|http://support.microsoft.com/kb/947821] -
ITunesHelper was not installed correctly. Error 7 Help!! My itunes worked yesterday.
My itunes wont open without an error message that says itunes was not installed correctly. Please reinstall itunes Error 7 (Windows error 14001) What has caused this and how do I get my itunes back????
after i researched this issue for several days and i emailed apple support this is what i did and it really worked. somewhere i saw on a post to download revo uninstaller because it gets rid of all aspects of a program. i downloaded the revo uninstaller pro. you get a 30 day free trial. i uninstalled everything apple. there is a place on there where you check what scale of scan to use. the first time i used medium on the first few items and advanced on the rest. the advanced scan really went through each and every file after the so called uninstall and found traces of the programs. i had to check boxes beside files that had traces and removed them all. (I ended up having to do this twice because the first time i did this the error box kept popping up when i reinstalled, so my advice is to choose advanced each and every time. also after the first time, that box popped up during the reinstall of itunes that said i needed permission to install something.) Next thing i did was checked on the recent updates and installs on my computer. windows/ms had installed 3 things in those automatic updates. i uninstalled all 3. i'm convinced that there is a corrupt file in there somewhere. there are several fixes and scans on the left side of revo, and i ran several of them just to check. the final one on the bottom was an evidence remover. since everywhere i have seen says to remove all traces, apparently when you empty the recycle bin it really doesnt get rid of it. so i did the evidence remover. it took all day. almost 9 hours. next, apple support had suggested i go to windows update site and download the latest version of there update software. i was wary, but i did this update. i restarted my computer. next i went back to apple and reinstalled itunes. during the reinstall, the box that said i needed permission didn't pop up. after the install the error box didnt pop up. and when i went to itunes, everything was there. i cant tell you which exact step fixed it, but something did. good luck to you. i emailed the apple support guy back and mentioned the revo uninstalled. i'm pretty sure that advanced scan really did the better delete than just uninstalling.
Lynne -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Itunes helper was not installed correctly. Error 7 (windows error 14001) ?
Upgraded to ITUNES 10 and received following error - Itunes helper was not installed correctly. Error 7 (windows error 14001) - have tried uninstalling all APPLE products, restarting etc and installing ITUNES and QUICKTIME separately yaddah yaddah - NO SUCCESS. Losing patience ?
have tried uninstalling all APPLE products,
Doublechecking. Were you using the instructions from the following documents?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(Doublechecking, because an error 7 off ituneshelper normally indicates trouble with Apple Application Support. If something else is going on, it's pretty exotic.) -
Every time I install an update of itunes, I get an error message saying: "/System/Library/Extensions/WkClassicNotSeizeDriver.Kext" was not installed Correctly. Has any one had it? Can you help me?
Find out what that third party software the kext file belongs to and update or use the developers method to uninstall the third party software responsible for it.
I suspect it's a iTunes extension perhaps?
You also can use the manual method of Finder > Go > Computer and opening your drive, then your System/Library/Extensions folder and looking for the file and moving it out onto the desktop, you will need to be in Admin user and use your password, then reboot to clear the random access memory. However this method doesn't remove the parent program you still need to do that.
How to uninstall/install software on your Mac
The kext file wasn't loaded, so it's not running, but removing it from the Extensions folder or uninstalling what put it there will solve your notification problem as that's all it appears to be. -
I recently moved my itunes to a new computer. The audible stuff doesn't automatically come up because its not purchased from the itunes store. So I opened the files with itunes on my new computer. It said that I had to authorise my audible account on this computer which I did, but then itunes came up with the following:
'Could not authorise this computer because iTunes was not installed correctly. Please reinstall iTunes.'
So I uninstalled then reinstalled iTunes and it still didn't work, I then did it again and it STILL DIDN'T WORK.
I have absolutely no idea what to do now, so if anyone has any advice it would greatly appreciated.When uninstalling iTunes on your windows computer, there is a specific way it must be done in order to completely uninstall all components of the software. Ensure you follow the article for your correct OS.
Windows XP - http://support.apple.com/kb/HT1925.
Windows Vista or Windows 7 - http://support.apple.com/kb/HT1923. -
I'm getting a n error message when I try to open Itunes. Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows error 1114) This happened after I unsuccesfully tried to install an update. I have had itunes on this computer for three years. When I try to reinstall the latest version I get another message.Service Apple Mobile Device (Apple mobile Device) failed to start. verify that you have sufficient privileges to start system services. Abort, Retry, Ignore Does anyone know how to solve this problem?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2 -
I have the latest version of iTunes and when I went to go open it, it can't! It says: "iTunes was not installed correctly. Please reinstall iTunes.Error 7 (Windows error 126)" What do I do now? Should I uninstall and try installing it again? I don't want to loose any of my music and info. PLEASE HELP!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(100023) -
When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.
Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates -
my itunes has gotten error 7 (windows error 14001) itunes wont even open it just says itunes was not installed correctly. someone help please
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2
Maybe you are looking for
-
How to do a CLEAN INSTALL of Windows 8.1 with a Windows 8 OEM Key
I have recently purchased a new C540 that has Windows 8 already installed on it. I would like to perform a clean install of Windows 8.1 on this computer. This is what I have done so far: I disabled 3 things in the BIOS: IIRC, they were secure boot,
-
Hi I have bought at screen calibrator and have created an icc profile for windows. I have Adobe photoshop elements and Lightroom, how do i get the colors to be be same in these 2 programs and even same as other program like windows previewer
-
How do you convert a negative digital image to a positive?
When I scanned some of my slides they turned into negatives. How can I get them back to positive images?
-
How to hide linked slides in PDF docs in Keynote?
Well... I want to make a CV (Curriculum Vitae) that should be for the German rules with max two pages. And I would like to make a keynote with two pages and 20 hided linked pages and sent it in PDF. Because... if the person that is reading the docume
-
Problems in Transformation !!!
I configured Transformation for a local database. And By using the following query , I checked transformation statistics. SQL> SELECT 2 RULE_NAME, 3 AC.NVN_NAME ACTION_CONTEXT_NAME, 4 AC.NVN_VALUE.ACCESSVARCHAR2() ACTION_CONTEXT_VALUE 5 FROM DBA_RULE