Password Work Around
I have a Toshiba Sattelite R15, it goes to the Toshiba Splash Screen and then do a DOS Screem asking "PASSWORD=" My brother can't remember the password he set on it. HELP!
Incorrect power-on password prompt -- with older BIOS versions
there is a document for this from toshiba.please call there number 1-800-457-7777 to check if your system part of that.
call them for more information about the problem.
blacksheep
Similar Messages
-
Work around if you have forgotten your password on an iPad Mini
If the password is forgotten for an iPad Mini what is the work around to open it?
Here it is:
http://support.apple.com/kb/HT1212 -
I upgraded my macbookpro hard drive to 1 TB then migrated my files from time machine. I'm now locked out of the computer because the password is not the same as my usual one and one that was years old and not retreivable. How do I work around this?
Whether or not you are able to recover the data off the drive yourself will depend on if the drive suffered any impact damage in the crash. You can buy USB SATA or IDE adapters (Intel and almost all G5 use SATA) that will let you connect your hard drive to a computer (like a flash drive) to see if you can recover the data. If the drive has suffered physical damage if may not mount.
If you know someone who has one of these adapters you could try using theirs, otherwise you could buy one but you take the risk of the data on the drive being non recoverable. Regardless, both are much cheaper than $1699!
(Alternatively, if you know of someone with a Mac Pro or PowerMac G5 they may be able to install the drive in their machine and try to boot from or mount it and copy the data off.) -
Someone changed my mother's administrative password, and that person can't remember what he changed it to. How do I work around this?
You have to get the install disc that came with the computer and boot to it.
Put the cd in and restart the computer. Hold down the C key and it will bo into the installer.
Once in you can click on the top menu and select reset password. Click the user and reset the password. -
I forgot password to install programs. Can i work around this?
I forgot password needed to install software. Can I work around this?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart. -
10.4.9 Printing Work-Around Fix - 10 Steps
VonB has already listed a fix in this thread.
http://discussions.apple.com/thread.jspa?messageID=4234084�
Unfortunately the links he provided there are for a paid site, and if you don't have a membership you're outta luck. I've taken his info, used it and written what I think are clear instructions to help you be able to print in 10.4.9 until Apple releases an update patch. Special thanks to Vonb for pointing me in the right direction.
Hope this helps...
Jim
10.4.9 Printing Work-Around Fix - 10 Steps
Problem - Many programs will not print in OSX 10.4.9.
What This Fix Does - Allows you to print in TEXT EDIT. You can then save MS Word files as Text Edit files and print them. Hopefully a fix will soon be released by Apple for OS 10.4.9 or MS for office 2004.
What This Fix Does Not Do - It won't allow you to print in MS Word if you currently can't, and it won't allow Appleworks to work if it currently doesn't.
Difficulty - easy to moderate. Can you paint by numbers or do you tend to draw outside the lines? If you follow the directions closely you'll be ok.
Disclaimer - I typed this fix out for myself and have applied it to my 5 personal macs and 4 at work. It hasn't crashed any of them, but I don't want you to get ****** off at me if it does... so if you screw your mac up by doing this don't say I didn't warn you. This fix isn't for newbies.
Time to complete - about 1/2 an hour.
Special Instructions -
A. You'll need to be logged in as the administrator of the computer you're working on. I've written this help missive in real plain language. If it seems like I'm speaking down to you I'm not, I'm just trying to make sure you don't screw it up and send me nasty emails.
B. Check to see if TEXT EDIT already prints for you, if it does then skip to #10. (TEXT EDIT can be found in your APPLICATIONS FOLDER on your Macintosh HD.)
OK... here we go, THE TEN STEPS! (cue dramatic music)
1. Delete all of your printers in the PRINT & FAX set up in SYETEM PREFERENCES by following this path - BLUE APPLE / SYSTEM PREFERENCES / PRINT & FAX. If the plus and minus button on the bottom left of the dialog window that appears is grey'd out, you need to CLICK ON THE LOCK and UNLOCK it. You'll need the administrator password to do this. Once the lock is unlocked, click on each printer listed there and then click the minus button. Repeat the process until all printers in the print & fax dialog are deleted.
2. Download two programs from the net. (REMEMBER where you download these files on your computer.)
A. Download a program called CUPS from this site. http://www.cups.org/software.php?VERSION=1.3svn-r6326&FILE=cups/1.2.8/cups-1.2.8 .dmg
CUPS is a unix program that Apple uses within Mac OSX to print. Download version 1.2.8 only. When you get to the site, you will have FTP and HTTP buttons to select where to download from. If you're already in a browser, click on one of the HTTP sites. That way you don't have to open an ftp program.
B. Download and install a program called PRINTER SETUP REPAIR (VERSION 5.0.5) from this site. http://www.fixamacsoftware.com/software/index.html
PRINTER SETUP REPAIR is a shareware program we'll use to fix some issues... if this works I suggest you go back to this site and be a good net citizen and purchase the software. If it doesn't then don't buy it.
3. Install CUPS by clicking on the CUPS.DMG file twice. This will open the DMG file on the desktop as a hard disk image. Open the CUPS HD image and click on the CUPS.pkg twice to install the program. Follow the instructions to the end. After installation click close button.
4. Open psr505te.dmg by clicking on it twice. (it might be called psr505TE.dmg.zip. if it is, click on the psr505TE.dmg.zip file twice to open it, then click on the psr505TE.dmg file twice to open it.) Once the psr505TE.dmg is open, open the PRINTER SETUP REPAIR HD on your desktop. Inside is a program by the same name. Open it by clicking on it twice.
5. Click the "TRY IT" button, type in your admin password, and click the CONTINUE button
6. On the left side of the Printer Setup Repair dialogue window, click CUPS TOOLS icon. in the middle of the dialogue box, if the screen reads " cupsd is running" click the STOP button located just to the left.
7. On the lower right hand side of the Printer Setup Repair dialogue window, under the words "replace current cupsd.conf file with", SELECT "new cupsd.conf file". Then click GO. Then click CONTINUE in the next dialog box that appears.
8. On the left side of the Printer Setup Repair dialogue window, click on the FILE PERMISSIONS ICON. Make sure that all of the boxes in the middle of the Printer Setup Repair dialogue window are checked except for OMIT LOCALIZED FILES and both of the FOR ALL USERS boxes. At the top of the screen in the middle click on the PRINTER ICON THAT HAS A QUESTION MARK on it. In the window that pops up click CONTINUE. This will run VERIFY AND REPAIR PERMISSIONS from inside the Printer's Setup Repair Program. (I know, there is a repair permissions in the Disk Utility Program already on the mac, it doesn't do something that this program does. I don't know what it does, but this works and Disk Utility doesn't.)
9. Run it AGAIN! (the second time does the trick for some reason. just once didn't do it on three out of 5 macs that I used this work around on). This should allow you to print in TEXT EDIT.
10. If you are using Microsoft Word and you want to print something, you need to SAVE AS a text only file (File menu / Save As / Format - Text Only) and print by opening the document in TEXT EDIT and printing from that application. So far this fix has worked on 1 intel iMac, 1 lamp stand iMac, an eMac, a Macbook and an iBook. (Funny enough, my G4 sawtooth Mac running 10.4.9 works fine and prints from MS word without a hitch.)
If this fix works for you, i encourage you to go back to printer's setup repair's website (http://www.fixamacsoftware.com/software/index.html) and purchase their software.Use the install disk that shipped with your Mac to "Repair Disk"
Steps for using Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.) Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair.
If you repair errors run it until no errors found.
Let us know.
-mj
[email protected] -
IPhone not sending POP mail? Here's a work-around.
Like some other people out there, I haven't been able to get the Mail App on the iPhone to talk nice to my POP email host's server. It receives mail just fine, but will not send. I've tried all the fixes I could find suggested out there, and had several back-and-forths with my server host's tech support, and then spent (literally) two hours with an upper level Apple tech trying to get the device and server working together . . . to no avail.
Until such time as my server opens up a new hole and allows easier access . . . or until Apple figures out some way to penetrate the pinpricks that are already there . . . I've come up with a reasonably good work-around that might be helpful for some of the others out there who are having similar issues.
It's a little convoluted, but it's easy to do, and there's no hacking/tinkering . . . so just follow it step-by-step.
1. Create a Gmail Account. Ultimately, you'll be sending your regular POP account mail through their server . . . so you'll need a Gmail Account.
2. Once that's created, there's an option to: "Use Gmail to send from your other email addresses" . . . and we're gonna get that set up now. To do that, log into your Gmail Account. Then go to Settings (at the top-right of screen). Then go to Accounts (the second Tab over). Then, where it says: "Send Mail As:", click on the option to "Add another email address". That'll open up another box that let's you fill in the name and email address of an alternative email account. Put your primary POP email account information here.
3. Gmail will then take you through a brief verification process, to determine if, indeed, you actually have access to the POP email account that you're trying to "spoof". Just follow the instructions.
4. Now, let's fix our iPhone's settings so that our POP account can use Gmail's Outgoing SMTP mail server. Go to your Mail Settings, and select your POP account (assuming you've already got one created that has the Incoming mail part working just fine). Scroll down to your Outgoing Mail Server settings, and either turn off your delinquent primary server and add a new server with the settings I'm about to give you. Or, what I did was, just change your primary server info to the following:
5. Here's the server settings that will work:
Host Name: smtp.gmail.com
User Name: use your full gmail email address
Password: use your gmail password
Use SSL: Turned On
Authentication: Password
Server Port: 587
6. Now, you should be able to send mail from your POP account through the Mail App on the iPhone, using Gmail's SMPT server as a proxy. You can already use the AT&T outgoing server settings in this same way, actually . . . but only when you're on the AT&T network (Edge or 3G) . . . not when you're on a Wi-Fi network.
Truth is, this trick would work even if we didn't do Step #2 and Step #3 . . . but then the email that we sent from the iPhone would have our Gmail Account information in the headers of our sent email, rather than our POP accounts reply-to information. Following Steps #2 and #3 make it appear as though the mail was still sent from our primary POP account.
Hope that's useful for someone else out there, that's been knocking their head against a wall trying to get their mail up and running. I'll post this on a few forums.
All the best --
DI don't get any pop-ups anywhere nor any menus (if there are supposed to be some). The code is rather messy, also, with all those on-the-fly definitions for styles and endlessly long JavaScript actions. Quite possible that the links override one another. Not to ruin your day, but I'd definitely start from scratch with an empty page and a clean style sheet for the various elements. IMO that's the only way to get this working properly.
Mylenium -
Work around for User ID 32 character limitation in CCX Agent?
Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !! -
MimeMultipart.getBodyPart Blocking Work Around
I am using MimeMultipart's getBodyPart() method. I need to read a bunch of form-data variables and determine if the subsequent set of attached files are valid or not. So, before I read the file portions of the MimMultipart I need to do some processing.
Unfortunately, when I call getBodyPart() it blocks waiting for the entire Multipart message to be sent (which could include hundreds of megabytes of files. But if I determine that a password is invalid or there is some other error using the first couple of form-data parts of the Multipart message, I shouldn't make the user wait to terminate the transfer.
Is there any work around to keep getBodyPart from blocking until the entire MimeMultipart message is sent? IMHO- It really should only block until it is available ... not the entire message.Just in case anybody else is having this problem, I tested the com.oreilly package, and it works great for this situation. It doesn't require the entire multipart message to be received before you can begin parsing form data.
-
Bug? re: SFX in 10.1 / constant work-around
When I first installed FCPX 10.1, I noticed my SFX and GarageBand elements were missing in the music and sound-browser. I learned a work-around to solve this. (from this user group)
Except, as it stands now... Every time I quit the FCPX app, I have to do the same work-around:
Quit FCPX
Open GarageBand
Quit Garageband
Re-Open FCPX
This is cumbersome to do EVERY TIME I launch into my project (after quitting the app.)
Is this a known bug?
Has anyone else experienced this?
Does anyone have a permanent solution?
Thanks.Try running the java commands as root:
bzn:~ bzn$ java -version
Error occurred during initialization of VM
Unable to load native library: libjava.jnilib
bzn:~ bzn$ sudo java -version
Password:
java version "1.6.0_22"
Java(TM) SE Runtime Environment (build 1.6.0_22-b04-307-10M3261)
Java HotSpot(TM) 64-Bit Server VM (build 17.1-b03-307, mixed mode)
bzn:~ bzn$
I've had to do this with a lot of other command-line tools since I installed 10.6 ... sips ... textutil ...
Hope this helps.
Barb -
FaceTime expired device certificate work around
I'm looking for a work around for FaceTime expired device certificate.I have iPad 2nd Gen and an iPod 4th Gen both have IOS 5 that use Google Map. If I upgrade my IOS, Google Maps will be uninstalled. Looking at the Apple forums the only way to fix this is to upgrade my IOS, this is not going to happen. it is stating to look like Android might be a better solution. Any help would be great.
If only Apply and Google could get along.
ThanksUnable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Below user name and password edit box and below choose home page menu there is no log in button on FF 7.0.1. This worked on earlier versions but not now. It looks normal on IE 8 is there a work around for this?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong -
Hi All,
We are currently in the progress of updating from Office 2007 to Office 2010 (i know a little behind the times!)
One of the functions that a certain department on is the ability to open links to a website. The document that holds the links is auto generated with hundreds of links in the form of https://username:[email protected]
For office 2007 we impletmented the work around provided in kb834489 and this has been working fine.
Now that we are starting to use Office 2010 this functionlity has completly stopped working. When you click on the link nothing at all happens.
Can anyone provide any help with this?
Many Thanks
MartinHi,
The workaround has an important problem about the security. We need to type the account and password without encryption, thus, it’s a not safe behavior. Microsoft has discards the
“http(s)://<var>username</var>:<var>password</var>@<var>server</var>/<var>resource</var>.<var>ext”</var>
URLs.
Quote From:
http://blogs.technet.com/b/privacyimperative/archive/2009/02/05/internet-explorer-8-s-suggested-sites-and-privacy.aspx -
My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?
I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
It also had no internet issues and none of the problems others have complained about in other threads.
unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch. -
Do not get an iphone 5 if you want to use it with a Chrysler product. The Chrysler Uconnect system might pair with your phone but the uconnect system will usually abend and become unusable after a few telephone conversations. I have been to the dealer twice. They have reset the uconnect system twice and I find it works for about 2 to 3 phone calls then it abends and uconnect becomes useless. They had me call Chrysler at 1-800-247-9753. I was told that the iphone five is not compatable at this time with any chrysler uconnect phone through the dash system, even the new vehicles. He had me get on this web site: www.uconnectphone.com as a place to monitor as when it would be compatable. They told me that Samsung seems to be working harder to make it compatible than apple is and they had no idea when it would begin to work. In effect Chrysler was telling me dump the iphone and get a Samsung if you want it to work in a Chrysler. Also, the site would only give you information for Chrysler that were 2008 or newer, they gave the following number to call if your vehicle was older. I called that number and they told me that Chrysler and Uconnect had no plans at all to make the iphone 5 work, in the future, on any Chrysler older than 2008. So.......If you have a Chrysler or Dodge that is older than 2008 you will NEVER be able to use an iphone5 on the uconnect through the dash system. Do not buy an iphone if you have an older vehicle. It will never be supported for the $1,000 you paid for this uconnect system on your car. My car is a 2005 Town and Country. I asked both Chrysler and uconnect if their was some sort of work around so I could use my phone. They both told me their was not and that they had no plans to resolve this situation for my vehicle. This means that I need to either get rid of my $42,000 vehicle with low milage or get rid of my Iphone 5. Niether are really good options.
I was also givne the following places to send formal complaints, even though I was told that neither Chrysler, Dodge or Apple were going to do anything to correct my problem:
for email: [email protected] or Mail: Chrysler customer Assistance P.O. Box 218004, Auburn Hills, Michigan 48321
If anyone hears of a work around to be able to use an Iphone 5 in a Chrysler or Dodge product, please let me know.This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
Maybe you are looking for
-
Get textbox values from ADF table
Hi, I have af:table with input Textbox as a single column in which user can enter values. I have applied valuechangelistener for textbox using which I can get values entered by user. Say I have multiple rows. When valuechangelistener is called, I get
-
Sound problems, ALSA can't find sound card at boot
Sometimes, my sound randomly drops out, and I can't get it back until I reboot. Even when I reboot, 1/20 times, it will not be back. When I watch stuff on youtube, sometimes the sound just drops out. Nothing gets muted. My audio player can't produce
-
Is there any way to get songs from your iPod nano into your iTunes library?
My iTunes library has been totally cleared but my iPod nano is full. I'd really like the music back in my iTunes library, so is there a way to get the music from my iPod into iTunes?
-
Windows to MAC, file picks up errors
Has anybody ever had this problem, I made my movie on a windows pc but now i am trying to put it on a MAC but for some reason when i put it on the MAC i get these problems: 1. My flash movies do not play 2. the buttons on my MIAW do not work 3. My da
-
I am using a Mac with OSX 10.4.11 with Office 2004. For some reason whenever I try and print 1/2 in a Word document, or even sometimes do random pages get corrupted when printing in Mac OSX. For example I'll print the document below, and the first pa