Password wrong for SAP_TDMS at central system

When executing "define RFC des", I get the error: " logon data for destination XXXXX_CEN incorrect, check user / password".
SAP request us to run txn CNV_MBT_REP_PWD to correct the password.
I have some questions about this:
1) I remember that before starting, we did double-check the password for SAP_TDMS for all 3 systems.
    We made sure the password is upper case, 8 letters and the same for each system.
    Why only the central system's SAP_TDMS is wrong?
2) OK. Let's take take that fact it is wrong. Can we go SU01 instead of CNV_MBT_REP_PWD to reset it?
3) if in case the password for SAP_TDMS at sender or receiver is wrong, is there a place at the central system
    to correct OR we have to go to the sender or receive to run txn CNV_MBT_REP_PWD?
Thanks!

Ashley -
We had the same issue as well- it seems to be occurring in TDMS4HCM components and the reason has got nothing to do with you forgetting the password.
It so happens that the RFC user that logs in to the sender, gets locked in due to some program error- either use a dialog user log on or implement the note 1332382.
Harmeet

Similar Messages

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

I smashed my screen to sent it to a phone shop to be repaired and he obviously reset it and my imessage said waiting for activation and I entered my password wrong and it won't let me retry and it says the same thing omg please help

I smashed my screen to sent it to a phone shop to be repaired and he obviously reset it and my imessage said waiting for activation and I entered my password wrong and it won't let me retry and it says the same thing omg please help

Troubleshooting FaceTime and iMessage Activation

Regarding authorization in solution manager for Central system monitoring

Hi,
I want to Prevent users from deleting Task logs in central system monitoring
in solution manager
I have assigned the roles SAP_SV_SOLUTION_MANAGER_DISP
But it gives display authorization for everything unable to keep track of
changes in monitoring
Can anyone please help me to prevent users from deleting task log history
Since I have to keep track of one month data
What can be the suitable role for it ? or what authorization objects i should
make a change to prevent deleting tasklog.
Kindly help me in this regard
Regards
Sanjeev.S

Thanks for your prompt reply
I am not saying about SDDCN
In transction solution_manager => opertation set up = > central system
administation
we will do manual monitoring for sattelite systems in this path. what we monitored
will be entered in task log history.
So what can be the suitable role to prevent the deleting of the task log history.
There is option delete task history. if any one by mistake clicked on that ,all the
records of monitoring will be lost.
so kindly suggest me a suitable solution

"user password expiration" for every 30 days for the NW2004S systems

Dear all,
We are using NW2004s with BI and DI,EP. We set the parameter "user password expiration" for every 30 days for the NW2004S systems(dual stack).
In the system users SAPJSF,NWDI_CMSADM,J2EE_ADMIN,NWDI_ADM, ADMINITRATOR is also getting change once in every month(30 days),So that we need to change the password and it should get update in the visual admin and config tools. Some time this arising problem. Is there any way to avoid the password expire for this particular user in the system .
Note :Password expire parameter should keep compulsory in the system
So Please guide us to resolve those problem.
Thanks in advance
Regards
Lakshminarayanan M

Hi!
I don't suggest you to change J2EE_ADMIN password. instead you should logon with your user.
Anyway.... please find below a small program to control passwords validity. for some users is very usefull.
REPORT ZS_ALTERA_DATA_PASS                     .
tables:usr02.
select-options : s_users for usr02-bname.
parameter:       p_data like usr02-bcda1 default sy-datum.
update usr02 set bcda1 = p_data
             where bname in s_users.
if sy-subrc eq 0.
MESSAGE 'Password validity changed' type 'S'.
else.
MESSAGE 'ERROR changing password validity' type 'E'.
endif.
cheers

Solution Manager - Central System Administration - Task list is wrong

Hi,
Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
Thanks for help.
Dalibor

>
Dalibor Cip wrote:
> Hi,
> Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
> updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
> Thanks for help.
> Dalibor
Have you already seen
[SAP Note 1097862 - Incorrect no. of tasks in SAP Solution Manager overview|http://www.service.sap.com/sap/support/notes/1097862]?
It contains also instructions how to fix inconsistencies.
Best regards,
Ruediger

Competitors for SAP Solution Manager within central system monitoring

Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!

Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM

Auto email Transmission for Central system administration

Hi Experts,
I want to setup an auto email transmission for "Central system administration" report in solution manager.
If anyone aware of the process, please guide.
Thanks,
Basis Consultant

Hello,
To setup CSA you will need to perform three important pre-requisites if you already have not done so.
> Create a Solution Landscape
> Setup the RFC connections between Solution Manager and the Satellite systems in your Solution Landscape
> Assign the Solution Monitoring Roles to the users.
In terms of the Automatic Email Notification it is currently not available as a standard functionality.
Thanks,
Mark

Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

I Forgot Oracle XE Password for Database administrator user "system"

Hello,
is there a chance to get my password back for the database administraor account with the username "system" or to reset it otherwise? Unfortunately I have no change to remember it. Is there help for that problem?

If you would like to change password:
you login to sys and then change password of some users if you need
linux:
export ORACLE_SID=XE
export ORACLE_HOME=<ORACLE_PATH>
sqlplus / as sysdba
SQL> alter user system identified by <new_pass>;
window:
set ORACLE_SID=XE
set ORACLE_HOME=<ORACLE_PATH>
sqlplus / as sysdba
SQL> alter user system identified by <new_pass>;
Re: Oracle XE default username / password

Password for Oracle user , sys , system , saprpd

Hi All ,
I just join a new company as sys admin . I tried to search password for Oracle user sys , system and saprd in my company password file . Those users password are not stored.
Am I supposed to know those oracle user password ? If yes , Can I find them in my Unix system or sap application ?
Please help !
Felix

It is not possible to determine the passwords if you don't know them. But perhaps note 562863 and the described default passwords are useful. Furthermore you can always change passwords if you have SYSDBA privilege using "alter user ... identified by ..." or "brconnect -f chpass".
Regards
Martin

I forgot the unlock password for my ipod touch4 system is ios5.0.1. How can I do?

I forgot the unlock password for my ipod touch4 system is ios5.0.1. How can I do?

To restore see:
iTunes: Backing up, updating, and restoring iOS software
How to get in recovery mode is in the link I provided in my first reply.

Says my apple password is wrong for FaceTime but works to buy apps?

I'm not sure why it doesn't take the password and says its wrong but works to buy apps?

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

Password wrong for SAP_TDMS at central system

Similar Messages

Maybe you are looking for