Passwordless SSH for Solaris 10 user (not root)

Hi All,
I tried the setup the passwordless ssh for an user between 2 servers but failed.
I follow this guide but only manage to setup for root, but not other users
http://www.sunsolarisadmin.com/solaris-7/ssh-access-without-password-in-sun-solaris/
http://adminschoice.com/how-to-configure-ssh-without-password
Any one tried??

Hello,
I have setup ssh with my accounts so I will try to help you.
1st off your guides look good. 2nd most people disable remote root login, you should too.
I'm guessing you used or where root when you generated the ssh keys. Do the steps again as a normal user.
I use this guide when I have questions about ssh. Maybe this guide will be easier to understand.
http://www.g-loaded.eu/2005/11/10/ssh-with-keys/
I hope this helps.

Similar Messages

ALSA device busy for normal user (not root) after systemd [resolved]

I'm not able to get audio when using a normal user (device or resource busy) but root works just fine. I think I've messed something up since I just removed consolekit and switched to systemd.
Here's what my .xinitrc looks like
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#exec gnome-session
#exec startkde
#exec startxfce4
#exec enlightenment_start
# ...or the Window Manager of your choice
#exec ck-launch-session startlxde
exec dbus-launch startlxde
I use LightDM via systemd service and LXDE. My devices in /dev/snd aren't actually busy. Nobody is using them and they work fine for root.
Where else should I be looking for trouble? Anyone have a similar experience?
Last edited by royallthefourth (2013-06-12 17:32:20)

It says I'm in the audio group. Here's the permission on the audio devices:
crw-rw----+ 1 root audio 116, 6 Jun 12 03:45 controlC0
crw-rw----+ 1 root audio 116, 9 Jun 12 03:45 controlC1
crw-rw----+ 1 root audio 116, 11 Jun 12 03:45 controlC2
crw-rw----+ 1 root audio 116, 8 Jun 12 03:45 hwC1D0
crw-rw----+ 1 root audio 116, 5 Jun 12 03:45 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Jun 12 03:45 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Jun 12 03:45 pcmC0D1c
crw-rw----+ 1 root audio 116, 2 Jun 12 03:45 pcmC0D1p
crw-rw----+ 1 root audio 116, 7 Jun 12 03:45 pcmC1D3p
crw-rw----+ 1 root audio 116, 10 Jun 12 03:45 pcmC2D0c
crw-rw----+ 1 root audio 116, 1 Jun 12 03:45 seq
crw-rw----+ 1 root audio 116, 33 Jun 12 03:45 timer
I ought to have access to these, right?

Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

I am sorry to ask rather stupid question.
I joined company which has big SUN Fire running Solaris 9 64bit version.
It has system memory 16GB and 8 CPUs.
I found 8GB memory reported as free. It is production box. It is heavy loaded.
I guess Kernel parameter settings for Oracle set too low.
I reported DBA and asked DBA to improve.
My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
32bit CPU and 32bit OS might have problem in access big memory.
But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
Specially on Sparc 64bit chip and Solaris 9 64bit version.
I searched forums and could not find good answer. I believe it is rather obvious.
Please help me on this. I will be greatly appreciated.
Thanks in advance.
Message was edited by:
user524303

I was really surprised by the fact that almighty
ORACLE can not access 4GB memory.
So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
Perhaps this link provides some useful info/background.

Error Message For BISystemUser: User not authenticated

We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?

Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721

Fields are bold for some users, not bold for others.

Post Author: karene
CA Forum: General
I have a report in Crystal reports XI using BusinessObjects. One of my users is complaining that one of the fields is bold. But it's not set to bold in the report, and when I run the same report, called the same way, with the same data, the field is not bold. We had a note about printer drivers, and he ran through our help on that, but it didn't change anything.
The field is actually a subreport, but I looked at that, and it is a straight database field (SQL Server 2000, memo type), not a formula, and it is not set to bold anywhere in Crystal, at least not that I can see. And besides, it doesn't print bold for me. He saved to a pdf and sent it to me, and it is bold. I saved the same data report to a pdf and it is not bold.
Does anyone have any ideas for a direction I should look? I think I recall seeing this field bold at some time on my machine, which makes me think it has something to do with a difference in Windows between our two machines. But that's pretty vague.
Here is some additional information. It's not always the same field. Sometimes two fields in a report are bold. It happens for users with both IE6 and IE7, although it's also not happening for some of us with IE6. We can set our IE6 settings to the same, and it happens for one and not for another.
-Karen

Post Author: karene
CA Forum: General
I'll ask about and check the Acrobat -- but we're using the ActiveX viewer -- so how does that matter? We've tried changing default printers before running the report, but it doesn't seem to make any difference. But... when I open the report to edit it, it does complain about me not having the printer that the report sees as a default, so it still may be related to printer drivers. I think that's a good direction to keep investigating.
I don't think the customer would like the entire report in bold, but that is an innovative solution!
I saw a post from about 6 months ago where it seemed like someone had the same problem, but there was no reply or solution. If I do figure it out (or if your help leads me in the right direction), I'll post the solution.
Thank you for the reply.
-Karen

Outgoing server works for one user not for other

Hi,
I just made a second user in Leopard. When logged in as the original user, the outgoing mail server works fine in Mail. When logged in as the new user, the outgoing mail server shows as 'offline' in Mail. In both cases the outgoing server is the same one.
As the new user i can only receive mail and not send any. I am pretty sure the account settings on both mail accounts r identical(Authentication, SSL etc.) (except for user specific identification of course)
Any advice/idea on what is wrong and what i can do to make the outgoing server work for both users?
Thx,
Brick

Yes I am certain the authentication is correct. When trying to send a message out Mail gives a message saying my "SMTP server does not support authentication".
When i open Mail preferences. The outgoing server is indicated as Offline.

Dump ASSIGN_TYPE_ILLEGAL_CAST in SAPLSDSD for 1 user, not for others

In a Unicode ECC 6.0 system (SAP_BASIS = SAPKB70013 and SAP_APPL = SAPKH60011) a user clicks the search help for a customer number field (Data Element = KUNNR) and the search help screen pops up. This search help popup opens on the Customers (general) tab.
Now without making any change in any field on this tab, the user clicks any other tabname and this results in a dump: ASSIGN_TYPE_ILLEGAL_CAST in ABAP program SAPLSD.
An other user and myself have tried to replicate this in the same system. We do not get the dump.
When I logon with the userid of the first user and debug, I can click whatever tab I want and it does not dump. As soon as I disable all breakpoints and press F8 (continue) I get the dump.
Anyone has a good hint?
Thanks.
Ger

This dump appears in program SAPLSDSD in include LSDSDF11 in routine PERSONAL_VALUES_CONVERT.
The dump indicates that the problematic statement is this:
ASSIGN align2-c(s_descr-intlen) TO <tmps> TYPE s_descr-inttype.
The field ALIGN2-C is defined as 255 type X
The field S_DESCR-INTLEN has the value 25.
The field S_DESCR-INTTYPE has the value 'C'.
So the program tries to assign 25 bytes of a hex field into a character type field symbol. In non-unicode this works, but is not accepted in unicode. This I can understand.
But why does it go to this routine for one user and not for 2 other users?
And why does it not go to this routine when the first user is running in debugging?
Edited by: Ger Hemmes on Mar 20, 2009 11:10 AM

Save for all users not working

I created a query in the rich client and selected "save for all users", but still cannot open it on another server. Has anyone else experienced this? I am on version 12.3.1 build 684.

I just did a Save As and checked the "Save for all users" box. I think I have to check "Remove document security", but that's grayed out); Deski only had the one option and it worked fine. There error I received is:
The document has been secured on another cluster. You cannot open this document on the current cluster. To open it, log on the right cluster and save it as unsecured. If the cluster is not reachable, try to connect to the following system : '<server>'. If this system is not reachable or not online, try the previous offline session with the connection ''. (WIS 30910)

Sql_text truncated for alter user not in dba_hist_Sqltext

why sql_text is truncated for "alter user" in v$sqltext
when i query v$sqltext i am getting only "alter user abc" .. not full text..
where as i am getting full text from dba_hist_sqltext for alter user...
Any idea..?

adk wrote:
why sql_text is truncated for "alter user" in v$sqltext
when i query v$sqltext i am getting only "alter user abc" .. not full text..
where as i am getting full text from dba_hist_sqltext for alter user...
Any idea..?what do you see below?
09:48:38 SQL> DESC V$SQLTEXT
Name                            Null?    Type
ADDRESS                             RAW(8)
HASH_VALUE                             NUMBER
SQL_ID                              VARCHAR2(13)
COMMAND_TYPE                             NUMBER
PIECE                                  NUMBER
SQL_TEXT                             VARCHAR2(64)

Simple report for lock users not actives in last 30 days ?

Hi, we need code in SE38 simple report for lock all users not actives in last 30 days.
This sample is good but need check : user its inactive in last 30 days.
http://www.sap-basis-abap.com/abap019.htm
Thank you.

You do not need a report to do this. The instance parameter
login/password_max_idle_productive
will do this for you.
Cheers
Graham Robbo

Desperately looking for mac.h header for Solaris 10u7 (NOT opensolaris)

Hi there,
for an experimental project I am trying to build a GLDv3 ethernet driver under Solaris 10 u7 x86.
Unfortunately building the driver requires some GLDv3 specific headers that are not shipped with
Solaris 10, because the GLDv3 interface is still unstable and therefore subject to change often.
Nonetheless I would like to build the driver, so does anyone out there have the following include files: mac.h, mac_ether.h, mac_flow.h, mac_provider.h? These must be for Solaris 10u7 or the driver will not build and/or work...
Again this is Solaris 10 not Opensolaris, and I cannot switch to Opensolaris for this project...
Thanks in advance for your help!
Rick

Issue has been resolved offline... ;-)
Matthias

Create POWL query for specific user (not self)

Hello All,
was wondering if anyone had an idea on how to create a POWL query for a specific user. Even the low level method in class CL_POWL_QUERY_ACCESSOR seem to assume that you either are creating an administrator query for any/everyone or just for yourself.
One option is to create multiple queries (for each selection criteria that I want) and assign these directly to user (rather than the role) in the config - but that's config that I'd need to transport up - for what is essentially user level personalisation.
My strong favourite at the moment is to throw a breakpoint in CL_POWL_QUERY_ACCESSOR and manually change the user name as I save new queries in directly in production - but that's not exactly the cleanest solution.
Surely someone has had a need to actually create queries for users, not just delete them as per program POWL_D01?
Many thanks for any hints and tips
Cheers,
Chris

Well - I should point out that you don't have to transport those user assignment of queries - tables are production maintainable. However, you do have to transport up the query itself - so not ideal.
Oh well - don't think this one has an answer => closing it to open another question.
Cheers,
Chris

MANAGEMENT AGENT 10.2.X FOR SOLARIS X86 NOT FOUND.

Does anyone know where i can find the 10.2.0.1 Management Agent for Solaris x86 distribution?

Not out yet. I've heard June/July

IWDClientUser Object for Other User not the Logged In one

Hi
I am using Uploading a file to KM using Webdynpro,
But i don't have permissions for all the users to create file in KM
Now,
in the program irrespective of the logged in user, i want to get
IResourceContext object for different user who have the permissions.
so that i can create a file in KM.
I am using the code.
IWDClientUser wdClientUser = WDClientUser.getClientUser("J2EE_ADMIN");
com.sap.security.api.IUser sapUser = wdClientUser.getSAPUser();
com.sapportals.portal.security.usermanagement.IUser ep5User = WPUMFactory.getUserFactory().getEP5User(sapUser);
IResourceContext resourceContext = new ResourceContext(ep5User);
the first statement is fetching IWDClientUser Object as the logged in user but not the J2EE_ADMIN.
Need Help!!.
Regards
Abhimanyu L
Message was edited by:
Abhimanyu Lagishetti

Solved
There are service Users in portal i have used cmadmin_service user instead j2ee_admin and it works.
Regards
Abhimanyu L

[SOLVED ]Automatic Xsession starting for two users not working

Trying to have two Xsession running in the same time, started automatically after login on two consoles. When I start the second manually at tty8, it is running flawless. When trying to do the same with .xinitrc, it is completelly ignored and still talks bullshit about Xsession running for display 0.
Make me feel there is some configuration file somewhere where it should not definitelly exist which takes controll everytime but when starting Xsession manually…
Last edited by Behemot (2011-10-15 18:55:37)

karol wrote:Not sure I get it, but .bashrc_profile!is executed when you log in, so you basically want to start X every time, right?
Yep exactly, computer for lames, the second user is just for english-speaking, first one will be for native Czech. As soon as this will work, I will even set automatic logon with mingetty for both users.
karol wrote:
exec ck-launch-session dbus-launch startxfce4 -- :1 tty7
For the second user change this to
exec ck-launch-session dbus-launch startxfce4 -- :0 tty8
:0 instead of :1 (or you can use :2 etc.)
I think I've already tried, tried again now and still the same result.
Last edited by Behemot (2011-10-15 14:25:46)

Passwordless SSH for Solaris 10 user (not root)

Similar Messages

Maybe you are looking for