Passwords aren't registered. Settings are right, i see the "remember" button, but clicking it doesn't seem te have any affect

After installing version 3.6.13 remembering passwords doesn't seem to work. I checked the settings (private navigation, privacy, security). each time i visit a website which needs a password the "remember - bar" shows and i press the remember button, but nothing happens.

You can try the Troubleshooting section:
* http://kb.mozillazine.org/Password_Manager

Similar Messages

After the kit kat update, S voice doesn't seem to work any more to wake up my phone. I've redone all settings for it with no luck.

"Hi Galaxy" will not wake up my phone after updating to 4.4.2. Is there any solution? I went back to scratch and did all settings to no avail.

Okay after two hours I got a tech on the phone that accessed the task manager and did a cache clean up on the entire phone. This worked and now Hi Galaxy will wake up the phone.
1. Go to Settings/Application Manager. Slide the screen to reveal ALL applications then scroll down to S Voice. Hit CLEAR CACHE. Then while you are still on that screen hold down the home button and hit Task Manager on the bottom left. Under RAM click CLEAR MEMORY over and over until zero applications are closed. Then restart the phone.
2. After the restart turn the phone back off. Once the phone is off you will hold the UP VOLUME, HOME BUTTON and then hold POWER at the same time. Once the phone turns on you can let go of the Power Button. RECOVERY BOOT will appear in the top left. You will come to a menu of options up in the top left corner. Use the VOLUME DOWN button to highlight WIPE CACHE PARTITION. You will select this option by pressing the POWER BUTTON. When this short process is over it will highlight REBOOT and just hit POWER again to reset.
Hope this works for you.

HT5538 Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password

Every time I try to use apple ID for face time I got an error message "the username or password was incorrect" although they are right and I use them in App Store and I cloud even after resetting my password, the problem happens also with iMessage . Please help

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

[svn] 3519: Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service .

Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xml

Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲

How do I answer calls with the KITKAT update? I hit the flashing button but it's still ringing? Where are the Answer settings?

How do I answer calls with the KITKAT update? I hit the flashing button but it's still ringing? Where are the Answer settings?

Aha! Thank you!!! That was not obvious. Sometimes I don't get the green and red icons. So it's slide it to the right for answering and slide to the left for voice mail.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

After updating to Yosemite, my screen saver settings are not maintained. The screen saver reverts to some Apple default. There is no way to get my setting to be maintained.

Hi ..
Might be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.screensaver.plist
Click Go then move the com.apple.screensaver.plist file to the Trash.
Restart your Mac then reset your screen saver.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

When I open my RAW files in Photoshop CC they are grainy and the JPEGS are not. What is going on? It doesn't seem to have anything to do with my CACHE levels either.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I just got a new iphone and we are hooked up to the same apple ID in this family, and his Ipad Have been receiving my texts. How can I fix this?

I just got a new iphone and we are hooked up to the same apple ID in this family, and his Ipad Have been receiving my texts. How can I fix this?

Welcome to the Apple Community.
You could simply ensure that only the numbers and addresses you wish to use on each device are checked at Settings > Messages > Send & Receive. However this isn’t an ideal solution because the other person can always change these settings from their device and have some fun with you and your contacts.
You’d be far better getting them to delete your account from their device and have them create one of their own. If you are sharing an ID for some other service such as iTunes, you can continue to do so, you only need change the ID for messages.

Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

Installed iTunes on Win 7. Everything is there except when I hook up my phone the mene has all the active buttons, but there's no lettering on the screen to see what they are

(Apologies for butting in wiclee.)
The effect is usually caused by trouble with the Segoe UI fonts on your system. Unfortunately it's a bit trickier to deal with on Windows 7 systems than Vista or XP. (The "Vortical" instructions which can fix it for almost all folks on Vista and XP aren't applicable to Windows 7.)
Try having a look through the following (unfortunately very long) topic. It contains a lot of information on the Windows 7 variants of this, and possible methods for fixing the various Segoe UI-related issues that might be in play:
iTunes 10.1 Missing Text

I cannot unlock my screen rotation . I double clicked the home button but no amount of swiping left to right brings up the media control screen, I have a 4s

I cannot unlock my screen rotation. I double clicked on the home button but no amount of swiping left to right brings up a media control screen . Help!!!

Make sure that Control Center is enabled. Settings>Control Center. Then, swipe up from the bottom of the screen to access various settings, including Rotation lock.

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

Always backup your important data before upgrading to a new Mac OS X.
Lion doesn't erase the drive but better to be safe than sorry.
And run Disk Utility (Applications/Utilities). Verify and if necessary repair the startup disk before upgrading.
Using Disk Utility to verify or repair disks
Before upgrading read here > Lion upgrade questions and answers: Apple Support Communities
And here > What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?

Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes to the F11 mode.

My Late 2009 Model 10,1 running 10.8.5 frequently acts as though I have pushed the F11 button, but I haven't. The cables are not loose. Gently touching the mouse will get the screen back, but often it immediately goes back to the F11 mode. Is this a hardware or software issue? How can it be fixed?

I called Apple. The problem was caused by settings in Mission Control. After changing all 4 of the Hot Keys (if that's the proper term) shown in the bottom half of the Mission Control window in System Preferences to "-" by clicking on the drop down menus, the problem went away. Apple's help was excellent!

My iphone 4s will not allow me to open any apps that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

My iphone 4s will not allow me to open applcations that I have downloaded. I have tried a few things but still will not allow me to open. Shows they are open once pushing the home button twice. Please help!

Pressing the Home button twice does not show you what apps are running. It shows you what apps were recently used.
Download a free app from the App Store. Once it downloads, your other apps should work properly again.

HT3235 I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" I bought mid 2009 to my old TV, the adapter doesn't seem to fit any of the connections, is this the right adapter?

I just bought a Micro-DVI to video adapter to try and hook my MacBook Pro 13" that I bought in mid 2009 to my old TV (svideo), the adapter doesn't seem to fit any of the connections on my macBook pro, is right adapter?

Shootist007 wrote:
Apple doesn't offer a MDP to AV or componet connect . Only DVI and VGA. They also don't offer one to HDMI. You have to go aftermarket to get one to HDMI.
Quite right, but as the OP does not have component or composite connections not important.
To the OP, this does work, but is not the cheapest, and as it appears that Apple no longer sell an SVideo adaptor cable 3rd party it will have to be.

Passwords aren't registered. Settings are right, i see the "remember" button, but clicking it doesn't seem te have any affect

Similar Messages

Maybe you are looking for