Passwords dont work

i get error ORA 12154
i have use SCOTT/TIGER and MANAGER/SYSTEM
they dont work.
this is my tnsnames file in admin::
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = beinke-dac02b93)(PORT = 1521))
(CONNECT_DATA =
(SID = ORCL)
I do not have a data base insatlled.
Second question:
How do I load 2 downloaded CD's. I want to get the info on the second disk to load???
Sid

ORA-12154 indicates that you're having problems connecting, not that you're having problems with passwords.
If you don't have a database on your local machine, what database are you trying to connect to? You'll need to contact the DBA of the remote database and ask for the connection information (SID or SERVICE_NAME, HOST, PORT, etc).
I'm not sure what you're asking with regard to the downloaded CD's. Is this data you're trying to load into a database? Are these Oracle CD's?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Mobile accounts sudo Password dont work

i have mobile accounts which stay in sync with homesync to the server.
we i want to change some settings sudo in terminal on the mobile account it always say wrong password but use the admin password of the computer!?

If I am understanding your problem it sounds similar to what I considered to be a bug introduced way back when Tiger came out.
A mobile account on say a laptop cannot do sudo even if you know and use the correct local admin password. The same mobile account can enter a valid admin name and password in to a GUI dialog box to authenticate. I did report this to Apple but they did not seem to agree or understand.
A workaround I found was to do the following
su admin
enter password
sudo command
enter password
That is a mobile account can switch user to an admin account in Terminal and then from that do the sudo command as normal.

Screen lock password wont work after downloading iOS 7, recovery mode/ factory setting still ask for passcode. anyone? anyone??

screen password dont work anymore now i can even get on my phone now, after downloading iOS7

Hi, travisbane.
Here is the best troubleshooting article to reference when a device is disabled.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
Jason H.

I cant tranfer music from an old account because i dont remember the password and i dont work there anymore so i cant recieve the email to get the password.

i cant tranfer music from an old account because i dont remember the password and i dont work there anymore so i cant recieve the email to get the password.

Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H.

I forgot my password to the ipod 5 gen and i try to restore and reset it but it dont work what do i do?

i hav forgot my password for my ipod 5 gen but i hav put it in so many times and it is disabled till i connect to itunes. and when i try to restore it it dont work so can u help?

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Hi, i have lost my code to download apps, my e-mail dont work anymore. how can i reset my password so i can download from appstoe.....pleace help me

hi, i have lost my code to download apps, my e-mail dont work anymore. how can i reset my password so i can download from appstoe.....pleace help me

If you have a backup for your iPhone with iTunes on your computer, you can get the iPhone's serial number and IMEI number from the iPhone's backup on your computer.
http://support.apple.com/kb/ht4061

Facetime dont work

my facetime dont work whith lion

Hello, friends.
In order to run FaceTime on Lion, solving the server registration issue, you must create a new password key in Keychain, with the following parameters:
Name: com.apple.facetime: registrationV1
Account: registrationV1
Where: com.apple.facetime
Then, restart your Mac.
Best regards!

I'm living in Iran and 2-step verification dont work here

I'm living in Iran and 2-step verification dont work here.Please help.

2-step verification is not available in Iran, so there is no way of your using it. If it ever becomes available in Iran it will appear in the Password and Security section at http://appleid.apple.com

Pam_ldap login dont work

I did read almost topics about the subject but i cant see a solution for the problem.
I'm running DS 6.2, solaris 10 latest update for server and client, but my client fail when try log in.
* The proxyagent its ok.
* getent passwd shows my users.
* 'su - user' from root account work fine, but 'su - user' from a regular user dont work, console login dont work, ssh login dont work.
* using a ldap browser i can bind to ldap using userDN / password.
Anybody can help-me, please !!!!!
My pam.conf :
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1
login auth required pam_dhkeys.so.1
login auth required pam_unix_cred.so.1
login auth required pam_dial_auth.so.1
login auth binding pam_unix_auth.so.1 server_policy
login auth required pam_ldap.so.1
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth required pam_unix_cred.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_cred.so.1
rsh auth binding pam_unix_auth.so.1 server_policy
rsh auth required pam_ldap.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authentication
other auth requisite pam_authtok_get.so.1
other auth required pam_dhkeys.so.1
other auth required pam_unix_cred.so.1
other auth binding pam_unix_auth.so.1 server_policy
other auth required pam_ldap.so.1
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy
passwd auth required pam_ldap.so.1
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1
other account binding pam_unix_account.so.1 server_policy
other account required pam_ldap.so.1
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1
other password requisite pam_authtok_get.so.1
other password requisite pam_authtok_check.so.1
other password required pam_authtok_store.so.1 server_policy
# Support for Kerberos V5 authentication and example configurations can
# be found in the pam_krb5(5) man page under the "EXAMPLES" section.
Debug logs:
Dec 5 11:20:37 build login[15583]: [ID 857369 auth.debug] PAM[15583]: pam_start(login,agaksri,8066378:80695d0) - debug = 1
Dec 5 11:20:37 build login[15583]: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:service)
Dec 5 11:20:37 build login[15583]: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:user)
Dec 5 11:20:37 build login[15583]: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:conv)
Dec 5 11:20:37 build login[15583]: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:tty)
Dec 5 11:20:37 build login[15583]: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:rhost)
Dec 5 11:20:37 build login: [ID 314219 auth.debug] PAM[15583]: pam_authenticate(80695d0, 0)
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_authtok_get.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_dhkeys.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_unix_cred.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_dial_auth.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_unix_auth.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_ldap.so.1
Dec 5 11:20:37 build login: [ID 634567 auth.debug] PAM[15583]: load_function: successful load of pam_sm_authenticate
Dec 5 11:20:37 build login: [ID 227947 auth.debug] PAM[15583]: pam_get_user(80695d0, 80695d0, NULL)
Dec 5 11:20:42 build login: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:authtok)
Dec 5 11:20:42 build last message repeated 1 time
Dec 5 11:20:42 build login: [ID 227947 auth.debug] PAM[15583]: pam_get_user(80695d0, 8047d10, NULL)
Dec 5 11:20:42 build login: [ID 952117 auth.debug] PAM[15583]: pam_authenticate(80695d0, 0): error Authentication failed
Dec 5 11:20:42 build login: [ID 285619 auth.debug] ldap pam_sm_authenticate(login agaksri), flags = 0
Dec 5 11:20:42 build login: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:authtok)
Dec 5 11:20:46 build login: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:user)
Dec 5 11:20:46 build login: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:ruser)
Dec 5 11:20:46 build login: [ID 436049 auth.debug] PAM[15583]: pam_set_item(80695d0:user_prompt)
Dec 5 11:20:46 build login: [ID 314219 auth.debug] PAM[15583]: pam_authenticate(80695d0, 0)
Dec 5 11:20:46 build login: [ID 842538 auth.debug] PAM[15583]: load_modules(80695d0, pam_sm_authenticate)=/usr/lib/security/pam_authtok_get.so.1
Dec 5 11:20:46 build login: [ID 227947 auth.debug] PAM[15583]: pam_get_user(80695d0, 80695d0, NULL)
ldapclient list:
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,ou=tigoias,dc=goias,dc=gov
NS_LDAP_BINDPASSWD= {NS1}ecc4aa3a54331543
NS_LDAP_SERVERS= aga253distp021
NS_LDAP_SEARCH_BASEDN= ou=tigoias,dc=goias,dc=gov
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= aga253distp043
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=people,ou=tigoias,dc=goias,dc=gov?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=group,ou=tigoias,dc=goias,dc=gov?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=people,ou=tigoias,dc=goias,dc=gov?one
NS_LDAP_BIND_TIME= 10
NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:tls:simple
NS_LDAP_SERVICE_AUTH_METHOD= passwd-cmd:tls:simple
[root@build:/etc] # /usr/lib/ldap/ldap_cachemgr -g
cachemgr configuration:
server debug level 0
server log file "/var/ldap/cachemgr.log"
number of calls to ldapcachemgr 20
cachemgr cache data statistics:
Configuration refresh information:
Previous refresh time: 2007/12/05 14:22:32
Next refresh time: 2007/12/06 02:22:32
Server information:
Previous refresh time: 2007/12/05 15:02:32
Next refresh time: 2007/12/05 15:22:32
server: aga253distp021, status: UP
Cache data information:
Maximum cache entries: 256
Number of cache entries: 0

flistello,
I dont know if the problem is sshd, because i get the same problem trying log in using "su - user".
Wrong user password debug:
Dec 17 14:51:41 aga253distp034 su: [ID 487273 auth.debug] PAM[20164]: pam_set_item(8068420:authtok)
Dec 17 14:51:41 aga253distp034 last message repeated 1 time
Dec 17 14:51:41 aga253distp034 su: [ID 250427 auth.debug] PAM[20164]: pam_authenticate(8068420, 0): error Authentication failed
Dec 17 14:51:41 aga253distp034 su: [ID 453631 auth.debug] tid= 1: Adding connection (serverAddr=aga253distp021)
Dec 17 14:51:41 aga253distp034 su: [ID 776464 auth.debug] tid= 1: Initialized sessionPool
Dec 17 14:51:41 aga253distp034 su: [ID 816976 auth.debug] tid= 1: Connection added [0]
Dec 17 14:51:41 aga253distp034 su: [ID 467101 auth.debug] tid= 1: connectionID=1024
Dec 17 14:51:41 aga253distp034 su: [ID 805042 auth.debug] tid= 1: shared=1
Dec 17 14:51:41 aga253distp034 su: [ID 982078 auth.debug] tid= 1: usedBit=0
Dec 17 14:51:41 aga253distp034 su: [ID 727660 auth.debug] tid= 1: threadID=1
Dec 17 14:51:41 aga253distp034 su: [ID 577507 auth.debug] tid= 1: serverAddr=aga253distp021
Dec 17 14:51:41 aga253distp034 su: [ID 939703 auth.debug] tid= 1: AuthType=3
Dec 17 14:51:41 aga253distp034 su: [ID 142272 auth.debug] tid= 1: TlsType=1
Dec 17 14:51:41 aga253distp034 su: [ID 537450 auth.debug] tid= 1: SaslMech=0
Dec 17 14:51:41 aga253distp034 su: [ID 625532 auth.debug] tid= 1: SaslOpt=0
Dec 17 14:51:41 aga253distp034 su: [ID 339871 auth.debug] tid= 1: hostCertPath=/var/ldap
Dec 17 14:51:41 aga253distp034 su: [ID 639905 auth.debug] tid= 1: userID=cn=proxyagent,ou=profile,ou=tigoias,dc=goias,dc=gov
Dec 17 14:51:41 aga253distp034 su: [ID 323218 auth.debug] tid= 1: unlocking sessionLock
*Dec 17 14:51:41 aga253distp034 su: [ID 293258 auth.error] libsldap: Status: 49 Mesg: openConnection: simple bind failed - Invalid credentials*
Dec 17 14:51:41 aga253distp034 su: [ID 250427 auth.debug] PAM[20164]: pam_authenticate(8068420, 0): error Authentication failed
Dec 17 14:51:41 aga253distp034 su: [ID 487273 auth.debug] PAM[20164]: pam_set_item(8068420:authtok)
Dec 17 14:51:41 aga253distp034 su: [ID 810491 auth.crit] 'su agaksri' failed for root on /dev/pts/6
Correct user password debug:
Dec 17 14:51:04 aga253distp034 su: [ID 968049 auth.debug] PAM[19395]: pam_set_item(8068420:authtok)
Dec 17 14:51:04 aga253distp034 last message repeated 1 time
Dec 17 14:51:04 aga253distp034 su: [ID 968742 auth.debug] PAM[19395]: pam_authenticate(8068420, 0): error Authentication failed
Dec 17 14:51:04 aga253distp034 su: [ID 453631 auth.debug] tid= 1: Adding connection (serverAddr=aga253distp021)
Dec 17 14:51:04 aga253distp034 su: [ID 776464 auth.debug] tid= 1: Initialized sessionPool
Dec 17 14:51:04 aga253distp034 su: [ID 816976 auth.debug] tid= 1: Connection added [0]
Dec 17 14:51:04 aga253distp034 su: [ID 467101 auth.debug] tid= 1: connectionID=1024
Dec 17 14:51:04 aga253distp034 su: [ID 805042 auth.debug] tid= 1: shared=1
Dec 17 14:51:04 aga253distp034 su: [ID 982078 auth.debug] tid= 1: usedBit=0
Dec 17 14:51:04 aga253distp034 su: [ID 727660 auth.debug] tid= 1: threadID=1
Dec 17 14:51:04 aga253distp034 su: [ID 577507 auth.debug] tid= 1: serverAddr=aga253distp021
Dec 17 14:51:04 aga253distp034 su: [ID 939703 auth.debug] tid= 1: AuthType=3
Dec 17 14:51:04 aga253distp034 su: [ID 142272 auth.debug] tid= 1: TlsType=1
Dec 17 14:51:04 aga253distp034 su: [ID 537450 auth.debug] tid= 1: SaslMech=0
Dec 17 14:51:04 aga253distp034 su: [ID 625532 auth.debug] tid= 1: SaslOpt=0
Dec 17 14:51:04 aga253distp034 su: [ID 339871 auth.debug] tid= 1: hostCertPath=/var/ldap
Dec 17 14:51:04 aga253distp034 su: [ID 639905 auth.debug] tid= 1: userID=cn=proxyagent,ou=profile,ou=tigoias,dc=goias,dc=gov
Dec 17 14:51:04 aga253distp034 su: [ID 323218 auth.debug] tid= 1: unlocking sessionLock
Dec 17 14:51:04 aga253distp034 su: [ID 453631 auth.debug] tid= 1: Adding connection (serverAddr=aga253distp021)
Dec 17 14:51:04 aga253distp034 su: [ID 816976 auth.debug] tid= 1: Connection added [1]
Dec 17 14:51:04 aga253distp034 su: [ID 467101 auth.debug] tid= 1: connectionID=1025
Dec 17 14:51:04 aga253distp034 su: [ID 805042 auth.debug] tid= 1: shared=1
Dec 17 14:51:04 aga253distp034 su: [ID 982078 auth.debug] tid= 1: usedBit=0
Dec 17 14:51:04 aga253distp034 su: [ID 727660 auth.debug] tid= 1: threadID=1
Dec 17 14:51:04 aga253distp034 su: [ID 577507 auth.debug] tid= 1: serverAddr=aga253distp021
Dec 17 14:51:04 aga253distp034 su: [ID 939703 auth.debug] tid= 1: AuthType=3
Dec 17 14:51:04 aga253distp034 su: [ID 142272 auth.debug] tid= 1: TlsType=1
Dec 17 14:51:04 aga253distp034 su: [ID 537450 auth.debug] tid= 1: SaslMech=0
Dec 17 14:51:04 aga253distp034 su: [ID 625532 auth.debug] tid= 1: SaslOpt=0
Dec 17 14:51:04 aga253distp034 su: [ID 339871 auth.debug] tid= 1: hostCertPath=/var/ldap
Dec 17 14:51:04 aga253distp034 su: [ID 639905 auth.debug] tid= 1: userID=uid=agaksri,ou=people,ou=tigoias,dc=goias,dc=gov
Dec 17 14:51:04 aga253distp034 su: [ID 968049 auth.debug] PAM[19395]: pam_set_item(8068420:authtok)
Dec 17 14:51:04 aga253distp034 su: [ID 810491 auth.crit] 'su agaksri' failed for root on /dev/pts/6

Reconciliation with Trusted Source dont work

Hello to all!! I hope you can help me with an issue.....
I follow the OIM Connector Guide For Database Applications Tables "A.4 Configuring the Target System As a Trusted Source"
I create a GTC with the next data:
Transport Provider list: Database Application Tables Reconciliation Transport Provider
Format Provider list Database Application Tables Reconciliation Format Provider
Trusted Source Reconciliation: Box cheked
Database Driver field oracle.jdbc.driver.OracleDriver
Database URL field jdbc:oracle:thin:@lordaeron:1521:OIMDB --> I cretae a table into de OIMDB for test
Batch Size field All
Reconciliation Type list Full
The table have the next rows:
MPLOYEE_ID VARCHAR2 No --> 235
FIRST_NAME VARCHAR2 No --> Jhon
LAST_NAME VARCHAR2 No --> Smith
EMAIL VARCHAR2 Yes
PHONE_NUMBER VARCHAR2 Yes
HIRE_DATE DATE Yes
LAST_UPDATE TIMESTAMP Yes
SALARY NUMBER Yes
STATUS VARCHAR2 Yes --> Enabled
On the third step:
- Create the reconciliation rule by creating a matching-only mapping between
the EMPLOYEE_ID (primary key) field of the Reconciliation Staging
- Create the mandatory fields required for creation of an OIM User
Organization, employee type, user type and password. Yes I put a generic password for all.
After this I run the task scheduler manual and don't populate the OIM... my log is the next:
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG QuartzSchedulerThread XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG QuartzSchedulerThread XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG QuartzSchedulerThread XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG QuartzSchedulerThread XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG QuartzWorkerThread-1 XELLERATE.RESOURCEMANAGEMENT - Class/Method: tcObjectOperationsBean/findObjects entered.
DEBUG QuartzWorkerThread-1 XELLERATE.RESOURCEMANAGEMENT - Class/Method: tcObjectOperationsBean/findObjects left.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG QuartzWorkerThread-1 XELLERATE.ADAPTERS - Class/Method: tcADPClassLoader/getClassLoader left.
I hope you can help me!!! Thanks

Hi, thanks for answer ... Yes I selected "Matching Only" on all fields ... but dont work --> Enabled On the third step: - Create the reconciliation rule by creating a matching-only mapping
I'll try to do again step by step maybe I miss something.... but I don't think so....
If I found a solution I feed this post......
Some help is welcome...... thanks

HT5429 the map dont work in iceland

Apple map dont work for Iceland , can you please fix it. thank you

I'am using fetch version 5.2.1 as FTP program
It seems like fetch dont offer any setup to UTF-8
i'll try to use Cyberduck
(yes - i dont use .mac it is wery wery slow if you try to use i from denmark :o) so - i miss the function password etc)

Iphone dont work

my iphone dont work what to do ?
i bought my iphone 5s before 8 months.
i went to idigital store that said me i havent 1 warrenty there .
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

snans wrote:
my iphone dont work what to do ? - what doesn't work - maybe add some details
i bought my iphone 5s before 8 months. - where did you buy this phone
i went to idigital store that said me i havent 1 warrenty there . not international warranty only in the country the phone was purchased.
they said me to go orange commpany in israel and they say that my iphone
wont prepare there
i dont know what to do
i had all my money in this iphone and i need it immedditly.
i need your helpful how i cheak my iphone and prepare it /
thanks you

Speakers dont work

My speakers dont work , headphone jacks do

Try reset SMC
see
http://support.apple.com/kb/ht3964
and Pram
http://support.apple.com/kb/ht1379

Dont work dimms 2- on K8N Diamond

Hi, i have problem with DIMM 2-4, if i put any memrory ram in the DIMMs 2 or 4, the BIOS give this error (using the led):
Quote
Testing onboard memory size. The D-LED will hang if the memory module is damaged or not insalled properly
But if i put ram in the DIMMs 1-3, work without any problem, also work if i put memory in the dimms 1-2-3-4, but only recognize the ram who is in the dimms 1-3.
I try to reset de bios and upgrade it to the last version, but dont work. Please anyone help me
pd:sry for my english :(

Quote from: finord on 13-February-07, 02:14:15
I try to install 2x256mb(at the moment i have 2x512 kingston value ram, in the dimm 1 and 3), i use a signle mode, but the problem is the dimms 2-4, if i put only 1 memory ran (kinsgton value ram) in the dimm 2 o 4, dont work
that is normal, when using 2 memory sticks always put them into 1st DIMM slots(close to CPU socket.) about 4 sticks usage and 2 of them are not detected, can be due your mixing memory (ranks & banks, and CPU mem.controller cannot handle it) what CPU core you got btw? im still not conviced its DIMM slots failure. also before installing all 4 memory sticks setup from BIOS command rate to 2T, and apply memory index 166. also you have insterting all 4 stick in wrong direction. put in DIMM1 & DIMM2 Kingston sticks(instead DIMM1 & DIMM3) and 2 other once 2x256 into DIMM3 & DIMM4 (instead DIMM2 & DIMM4)
re-test.

Dont work dropdown list in Variation Label Menu on one variation site

Hi, guys! I have trouble with Variation Label Menu. I have site with four variation language and i made Variation Label Menu using code on my master page
<div style="float:left; margin:6px; z-index:9999">
<PublishingWebControls:VariationsLabelEcbMenu id="variationLabelMenu" DataSourceID="LabelMenuDataSource" DisplayText="" IsCallbackMode="true" runat="server" />
<PublishingWebControls:VariationDataSource id="LabelMenuDataSource" LabelMenuConfiguration="1" Filter="" runat="server"/>
</div>
On three variation site Variation Label Menu work fine on UA, FR, EN
But on one site RU (this site is source for another) Variation Label Menu dont work :((
I will glad to any ideas for fix my problem.
Aleksandr Shramko

But that should have changed the logic of the navigation:
The VariationDataSource control supports three different operation modes using the LabelMenuConfiguration attribute:
Link to Peers: this is the default and most common operation mode. In this mode, the data source returns links to peer pages of the current page.
LabelMenuConfiguration="1"
Link to Parent: using this operation mode the data source returns links to the peers of the parent site. That link will not point to the peer page but to the peer site of the current site.
LabelMenuConfiguration="2"
Link to Top Site: using this operation mode the data source returns links to the top sites of peer labels.
LabelMenuConfiguration="3"
http://blogs.technet.com/b/stefan_gossner/archive/2011/11/29/sharepoint-variations-the-complete-guide-part-12-customization.aspx

Passwords dont work

Similar Messages

Maybe you are looking for