Pasta configuration - change driver settings.

Hello Xperts,
I'm currently configuring printers for a R12 site and there is an issue with the alignment, after running the diagnostics I noticed that the print style is LANDSCAPE I woul like to make it LANDWIDE and test, can one please let me know how do we make this change for this particular printer.by doing this the changes made to the driver settings to alter the printing on the right hand side would take effect as per note 358879.1
This printer type has both style and driver settings for LANDWIDE and LANDSCAPE not sure why it's picking only the LANDSCAPE.
Thanks in advance.

Please see these docs.
PASTA 3.0 Release Information [ID 239196.1]
How To Setup Custom Pasta A4 Print Styles And Drivers [ID 763274.1]
How to Setup Pasta for PCL Based Printers [ID 365111.1]
The Pasta Landwide Driver Truncates / Cuts Off The Right Side Of The Report [ID 358879.1]
Thanks,
Hussein

Similar Messages

  • I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive.  How can I change the settings so it automatically goes to my new hard drive?

    I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive.  How can I change the settings so it automatically goes to my new hard drive?

    lisacooney wrote:
    I have recently moved all of my files to a larger external hard drive
    How did you move these files?

  • Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

    Just downloaded Firefox 6.0 and have restarted 4 plus times, but it continues to hang while launching. I cannot open new windows, change any settings, or do anything but Force Quit. I'm on Mac OSX 10.5.8. How do I get past this hang?

    Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
    Mylenium

  • I have been getting my email in duplicate in MacMail for the past week. I haven't changed any settings on MacMail. My server is Verizon/Yahoo. How can I get it to stop?

    I have been getting my email in duplicate in MacMail for the past week. I haven't changed any settings on MacMail. My server is Verizon/Yahoo. How can I get it to stop?

    I have been getting my email in duplicate in MacMail for the past week. I haven't changed any settings on MacMail. My server is Verizon/Yahoo. How can I get it to stop?

  • Change print driver settings on canon printer to select one or two sided printing

    My Canon print driver prints double sided by default. I want to change to single sided, or be able to select single or double on a per document basis. How do I change my print driver settings?

    Here is the solution I used.
    The Print driver for Canon, UFRII will default to double sided printing.
    Select a document, and select Print.
    Open Presets and select Show Presets (this step may not be necessary)
    Open Layout, then open Finishing. Change Prunt Style to One side or one page
    Open Presets and Save Current Setting. At this point you can change the name of the preset (one page) and select if the chafe is for only the selected printer or all (Canon) printers.
    This sure seemed harder than it should be.

  • I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings.

    I have been using firefox for a long time, today when i tried to launch firefox i recieved "Firefox is configured to use a proxy server that is refusing connections." i dont know how to fix this. I didnt change any settings, im the only person who uses this computer

    You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
    If you do not need to use a proxy to connect to internet then select "No Proxy"
    See "Firefox connection settings":
    * [[Firefox cannot load websites but other programs can]]

  • How do I change the settings in quick time player to screen record video using less hard drive space?

    how do I change the settings in quick time player to use less hard drive space when performing a screen record? When I screen record a video lets say from vimeo, QTP seems to use a lot of hard drive space.  Please help.  Are there settings some where to adjust to slim down the video size? Thanks for your input.

    I just did a short SR test, first I exported to 480p, then I saved the file. Now I have 2 files one 11.9mb (export) and the other 42.8mb (save). I then took the save file and performed an export on it to 480p.  Guess what, it saved at 11.9mb.  So it seemed to save me 3/4 of the space.  Lets see what happens with a 17 minute SR.  Thanks!
    Any suggestions on getting the sound louder with the SR?
    For anyone else ever seeing this post, for me the best was using an external speaker whether wired or bluetooth, facing the left side of the computer where the internal mic hole is.   Good Luck!

  • My CD/DVD drives quit working and I had to change Registry settings to get them to work again. Now Itunes gives me a message at startup that I need to reload iTunes.

    Both of the CD/DVD drives on my desktop computer quit working. I had to change registry settings to get them to work again and after that iTunes gives me a message on startup that I need to reload iTunes because of the change in registry settings. I'm concerned that if I reload iTunes that my drives will quit working again though I don't know why they quit working in the first place. Is there a known problem or incompatability with some drives and iTunes. What is it about the registry settings that iTunes requires my CD/DVD drives settings to work or not to work? I haven't updated my iTunes software since changing the registry setting to fix my drives.

    I've read some of the support articles about reinstalling the iTunes upper filters in the registry but I don't like the idea that iTunes seems to be saying that they are the ones that will be in control of what CD burning software that I am allowed to use on my computer. If I put the iTunes upper filters back on the computer will I not be able to use other CD burning software again? If I reload iTunes will it interfere with the use of the other software, or, if I use the other software again will I have to go back and reload iTunes or reset my registry every time. This seems to me to be a problem that iTunes should fix so that they don't interfere with other computer operations.

  • Changing PowerMizer settings of Nvidia driver without restarting X

    Is it possible to change PowerMizer settings of Nvidia driver WITHOUT restarting X?
    I know this normally is not possible, but I'm asking about some hax0r tricks that might exist.
    I would like to include those settings in automatic power saving script, but of course to do that, it has to work on a continuously running environment.

    I've written crap!!!
    This is the way:
    gdmflexiserver --xnest
    if you want a window with a new login!!!
    and
    gdmflexiserver
    if you just want another x session  (Tere will be two of them in the same time).
    You should .xinitrc alon, and use a display manager (such as gdm)
    if you want this just modify in /etc/inittab
    :x:5:respawn:/opt/gnome/bin/gdm -nodaemon
    it should be the last line.
    respawn means that if you close the x serv, it will restart

  • Email send/receive suddenly doesn't work ; can't change email settings as BB phone won't accept valid username and password -- what to do?

    email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
    I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
    I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
    Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.

    But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work?  I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe.  This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot.  But I know both were exactly the same.  But after this incident only the Supervisor password worked.

  • You may need to configure the connection settings in the deployment descrip

    Hi All
    I am new to BPEL and going through Order Booking Tutorial (using 10.1.3.4 version of opmn ) .
    I have a problem in 'Designing the Database Adapter to Insert Data' Chapter.
    I have installed Oracle 10g Express Edition and BPEL Process Manager on my local system.
    In the Example it has been asked to create a daabase connection with Third Party JDBC Driver. Instead I have created a database connection with Oracle(JDBC) Driver.So i didnt have to register any third party driver.
    I cud access the Order/OrderItems table as well .
    I Deployed the same on the server.But while running the process I get following error--
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    nested exception is:
         ORABPEL-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore. [Caused by: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    The Connection descriptor used by the client was:
    localhost:1521:XE
    See root exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml) and restart the server. Caused by Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.4.0) (Build 080602)): oracle.toplink.exceptions.DatabaseException
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    I have checked several post on this error but every post talks about third party database.I have used Oracle Database only so why/What shud I change anything in oc4j-ra.xml?? This is my doubt .
    Pls help me on this .Also Let me knowe in my case is there any need to create the datasource.?I am low at concept of database.
    Pls help
    Regards
    Naveen

    Hi
    I am trying to insert orader and order Items as given in the Order booking tutorial..
    Here are the files description
    .wsdl file looks like
    <service name="DBInsert">
    <port name="DBInsert_pt" binding="tns:DBInsert_binding">
    <jca:address location="eis/DB/MyConnection"
    UIConnectionName="MyConnection"
    ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"
    mcf.DriverClassName="oracle.jdbc.OracleDriver"
    mcf.PlatformClassName="oracle.toplink.platform.database.oracle.OraclePlatform"
    mcf.ConnectionString="jdbc:oracle:thin:@localhost:1521:XE"
    mcf.UserName="system"
    mcf.Password="6672B62098892995C8B651EFDF798A59"
    />
    </port>
    </service>
    data source file looks like
    <connection-pool name="MyConnection">
    <!-- (DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE))) below is in the form: [hostname]:[port]:[oracle sid]" -->
    <connection-factory factory-class="oracle.jdbc.OracleDriver" user="orabpel" password="->pwForOrabpel" url="jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=tcp)(HOST=nakhanna)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=XE)))"/>
    </connection-pool>
    <managed-data-source name="MyConnection" connection-pool-name="MyConnection" jndi-name="jdbc/MyConnectionDS"/>
    </data-sources>
    oc4j-ra.xml looks like
    <connector-factory location="eis/DB/MyConnection" connector-name="Database Adapter">
              <config-property name="xADataSourceName" value="jdbc/MyConnectionDS"/>
              <config-property name="dataSourceName" value=""/>
              <config-property name="platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/>
              <config-property name="usesNativeSequencing" value="true"/>
              <config-property name="sequencePreallocationSize" value="50"/>
              <config-property name="defaultNChar" value="false"/>
              <config-property name="usesBatchWriting" value="true"/>
              <connection-pooling use="none">
              </connection-pooling>
              <security-config use="none">
              </security-config>
         </connector-factory>
    ##################################################################3
    Still I get the same error .
    <bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
    </part><part name="summary"><summary>file:/C:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_FulfillOrder_4.0_e77c64251e45eb4711a3a093f92e6a86.tmp/DBInsert.wsdl [ DBInsert_ptt::merge(OrdersCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: java.util.MissingResourceException
    java.util.MissingResourceException
    ; nested exception is:
         ORABPEL-00001
    java.util.MissingResourceException
    java.util.MissingResourceException
    java.util.MissingResourceException
    </summary>
    </part><part name="detail"><detail>null</detail>
    </part></bindingFault>
    Pls let me know if something looks wrong in the above files
    Thanks
    naveen

  • Print Driver Settings Not Saving at Print Dialog [IDCS3, Vista]

    Hi. On our only design machine that runs Vista, when the user tries to print something from InDesign CS3 and has to turn on duplexing in the printer driver setup, on clicking OK, those settings immediately go away, and thus the document will not print duplexed. It works fine on our XP machines.
    A workaround is to set such printer driver settings via Vista's Control Panel, and this does work, however it's a bit cumbersome, since we print all kinds of documents.
    Pertaining Specs:
    - Adobe InDesign CS3 (5.0.3) for Windows
    - Vista Home SP1 (I think)
    - Konica-Minolta Bizhub C500
    - EFI Fiery 2.01 Driver for Vista / PostScript / Image Controller 405
    It's similar to this issue, but the specs differ:
    Michael C Stone, "Indesign documents reset printer settings IDCS2 XPSP2" #, 14 Jun 2008 5:19 pm

    It does say, "Double-sided: Yes," in Windows' printer properties for the Bizhub PS (and PCL) Fiery driver(s) -- in fact, this may have been from me turning it on for the PS driver in Windows Registry, as it was off for some reason, but seemed to make no real difference anyway -- but I think the duplexing option would have been grayed-out in the Fiery driver's dialog if not available as some various other options are -- the driver has the capability to poll the device for such options availability -- and I don't actually see anything duplexing-related on the Installable Options tab, but the Installed list is identical to one of our XP computers with no apparent issues with printing to the drivers from InDesign -- although at one point, if a Vista user printed an InDesign document and saved it (and thus the printer settings), XP users for some reason couldn't print the document without forcing a change in the print driver settings, but I believe this was due to using the same drivers but different TCP/IP port configurations per machine (Vista doesn't need the IP_ prefix as XP seems to).

  • Modify Ethernet driver settings for a local zone of exclusive ip-type

    Hi there
    A quick one. Have configured a local zone with ip-type set to exclusive for a physical interface fjgi1. How can I modify the fjgi driver settings for this local zone?
    Should I edit /platform/SUNW,SPARC-Enterprise/kernel/drv/fjgi.conf under the global zone and reboot the global zone, or create and edit a new config file in the local zone and reboot it?
    Thank you
    Sunny

    Driver settings like this are shared by all zones. So you'd need to make the change in the global zone.
    Darren

  • Help Configuring Hard Drives...

    Hey everyone,
    Just finished my first build, everything went pretty smoothly.  My only question involves the configuration of my hard drives.  I am running 3 drives, a 40GB IDE for my OS, an 80GB IDE for music storage, and a 120GB SATA for a video editing scratch disc.  Could someone tell me what my jumper and BIOS settings should be?  Also, what kind of raid and setupwould be best.  I'm somewhat new at all this, so any help is appreciated.  Thanks!

    Sounds like you already got the OS up and running so it wouldn't be a good idea to move around any drives at this point unless you have trouble.
    If you do have the OS installed and all the drives are seen and working properly then don't change any settings in the Bios for the IDE Config menu. If not then I suggest the following for maximum flexibilty:
    Bios>>Integrated Peripherals>>ON-Chip IDE Config:
    Native Mode
    Pata Only
    Keep Sata Active-Yes
    Pata-Both Channels
    Rest will be greyed out or leave at default.
    The jumpers should be set for master/slave/single as per diagram on the drive. If there's any jumpers on the Sata just leave it where it is. You want to set it up so that all your heavy data transfers will not take place between 2 drives on the same IDE channel. The Sata drive has its own channel.
    Your board has no Raid hardware onboard so you would have to buy a PCI Raid card in order to use Raid.  

  • Help me configure Change request management !!!

    Dear friends,
    I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
    Just want to know Clear few things before i proceed..
    I am also refering SPRO and related notes
    Scenario :
    I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
    R03 has 3 clients, 300 600 700..
    In R03 300 is the development client, 600 is quality client, 700 is the production client.
    SOL has 2 clients, 100, 200
    With 200 as the production client.
    Q.1) <b>Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).</b>
    Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
    When i logon to client 200 and  Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
    Then by default it take the previous client ( client 100) as the change request management client.
    ( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
    I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
    <b>Plz let me know what do i do to set the change request client to 200??</b>
    Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
    We are planing to establish domain links between the two systems( ie both the domain controllers) ??
    Is this the right strategy ??
    <b>Any other method that u can recommend  ??</b>
    Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
    Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
    When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
    These destinations works well,
    but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations  i test these destinations using Remote Logon i get error,
    " no authorization to logon as trusted system"
    I went thru one note which recomended Kernel upgrades to solve the problem,
    I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
    <b>what is your kernel patch levels in sateliite and solman systems.</b>
    Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
    We also create RFC destinations to client 000 of all the sateliite system,
    <b>dont u think these RFC destinations might interfere with each other??</b>
    Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the  configuration documents with me..
    Please note :
    <b>All the contributors would be handesomely rewarded with points .</b>

    Hi,
    Check this
    Note 128447 - Trusted/Trusting Systems
    For your Q4.
    Q3.)
    Establishing Domain link - That's the right way. Go ahead.
    These are the steps.
    <b>1.Define Transport Routes for System Landscape</b>
    assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
    <b>2. Activate Extended Transport Control</b>
    The CTC parameter should be '1'
    <b>3.Configure Transport Strategy</b>
    Deactivate the QA Approval.
    <b>4. Activate Trusted Services.</b>
    5.Activate Domain Links.
    You have to activate domain link between systems.
    6. Generate RFC Destinations to Client 000
    Hope this helps.
    feel free to revert back.
    --Ragu

Maybe you are looking for