Paste over at playhead to insert video while retaining audio not working

I am trying to paste "extra" video over my bad video, using the cross dissolve transition between the original and the pasted, and then back to the original video. All this time, I am seeking to have the original audio playing. I have followed the iMovie help directions as to copying the video piece I want to splice in (about 10 seconds long), then selecting the segment of video and audio to past over (9seconds long) and choosing under the advanced menu the paste over at playhead command.
The audio gets screwed up, with pieces not syncing properly. I am using high definition audio/video from a jvc hd camera.
The file I'm working on is about 1 hour long, and I am using an Intel Mac Pro (1 yr. old) with upgraded memory (the paste over at playhead command does work pretty quickly).
The first time this happenned I had extracted the audio, but it happens even on a virgin file without the audio extracted. I've now reinput the virgin footage 3 times as the files are corrupted.
Plus, sometimes the cross dissolve doesn't work. And sometimes the paste over at playhead command just doesn't work, especially if I am trying to add two consecutive "extra" segments of between 10 and 20 seconds. Any ideas? My project requires probably 50 of these pasted video segments as it is a concert with many camera moves (only one camera) which I had hoped to cover with the "extra" video.

Ignore or remove the square character and the question mark at the end, then it takes you to this thread:
http://discussions.apple.com/thread.jspa?messageID=2335104
P.S: Sorry; I have no trouble with Paste over at Playhead, so can't advise.. and am going to have a little holiday.. byeee!

Similar Messages

Mac Pro Locked Up and Now One Video Card and Audio Not Working

Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was the monitor and that was not the problem.
I tried doing a formal shutdown after the restart and this also did not clear up my problem.
Everything was working fine prior to the lockup. Any suggestions would be much appreciated.

If you've added RAM and are using the nVidia 9400m video driver, you may be using incompatible RAM
http://www.nvidia.com/docs/IO/60555/MemoryCompatibility_List_DA-04576-001v01.pdf
My wife's MB is locking up when watching videos; hulu, iTunes, VLC. The above is the only answer I've found.
BOL

I have deployed one application containing youtube video but it is not working pls help

I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help

Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick.

Question: How to connect my iPad with iTunes since it show that in iPad screen while it is not working?

My iPad not working and show message in the screen to connect to iTunes, So how i can connect to iTunes while it is not working is through my computer and do i need to download iTunes first?
Thank you

When your iPad wants to be connected to a computer with itunes, yes itunes need to be on the computer. Click here to Down Load iTunes.

Sharepoint Custom calendar – Hover over the date to add a new item is not working – Sharepoint 2010

Hi,
In my Sharepoint visual web part i am using default sharepoint calendar view. But Mouse hover over the date to add a new item is not working. Please see this image below i need the same add new item functionality.

Hi Sudhanthira,
Couple of simmilar queries i can see from Madhu posted.
Please follow this thread:-
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/b62f9b7e-2ce1-4efd-905c-9cc5471ad216
To be or Not to Be..The question is this only......

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?

Question to all iPad users please help in this issue
How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
Thank you for help out.

Hi Jamalzoal,
Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

TS1424 6 of my music videos i purchased are not working, they freeze up

music videos i purchased are not working correctly

Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

Re post: Editing-- Insert video and move audio, preserving sync

Forgive me, a newbie, for posting this twice, but I think the iM6 group folks, not the iM8 folks, may have the a clue about this issue.
I really love iM6. I do have FCExp, but I've gotten so comfortable with iM6 that I hate to change. But I am frustrated by one thing.
I may be trying to do something too advanced for iMovie (6HD) but almost everything else with this product is so amazing, I can't imagine that they didn't build this in. I must be overlooking something.
I am making dvds from a VHS conversion of some 60-70s 8mm home movies. A labor of love for an aging parent. The amateur filmmaker used to project them with records playing, and at some point he collected all his chosen LP music onto a cassette (not on the video cassette, a music only cassette). So, I play the VHS and the music at the same time and use an analog to Firewire converter and load all into iM6. So far so good. Then, because I need to seriously mess with the music to put it more or less in sync with the video segments, I extract the audio so it now shows up as a second track. Still no problem. Now in editing I clip or split the audio into separate pieces and checkerboard them, alternating between the two audio tracks in the timeline so I can adjust volumes, cross fade, etc.
The first volume I did took a lot of twiddling and tweaking to keep all the clips in their proper places. I'd work at the end of the piece, then at the beginning then back to the end with the result that the audio clips were always sliding out of position. I can't quite figure out how to keep two audio tracks in sync with the video. BUT I did finally finish and when I started the next one, I swore that I'd always finish a segment and then move on to the next, always left to right, never tweaking the finished stuff to the left (earlier on the time line). This has made the job much easier but I have one big problem now. I did not think to put some black at the head of the project to put the titles on!
You'd think I could just put the cursor at 0:00 and insert a 6 second title over black and it would move all the video and audio to the right by six seconds. But what happens is only the video slides over. The two audio tracks don't move and are now six seconds early. Sure, I could go ahead and re-adjust all the 30 or 40 audio clips, but I can't help thinking that "Apple wouldn't make me do this..."
Has anyone any idea how to lock all the edited material together so I could insert some space to the left without losing sync?
PS does anyone share my frustration on THIS: when I copy a little piece of sound from one of those tracks and then paste the copy, there's no telling where it will land... It never goes to the cursor position. If I'm lucky it lands somewhere on the timeline after the project end and I can drag it back to where I want it. But on an hour project this is annoying.

I think I solved my own problem, and Klaus, you were correct, Lock to Play head is the key.
In order to select ALL the clips on both tracks you click and drag a box across all the clips you want to lock and then select Advanced/Lock Audio Clip at Playhead and all the clips will be locked to their video positions, though in my case only a few of them sprouted little yellow pushpins. I was then able to slug 6 seconds of Black in ahead of my video, and voila!, both video and attached audio moved over staying in sync. I knew Apple wouldn't let me down, though the answer was not explicit in any Apple documentation. I guess I'd better buy the book now.

How to insert video without affecting audio on Mac

I'm trying to insert video but it keeps displacing my audio in soundtrack. I hold the alt button as it says in help instructions but it doesn't work. How do I do this seems a simple thing a program like this should do.

Welcome to the forum.
It sounds like you are running up against PrE's default to do a Ripple Edit, when you want an Insert Edit. The modifier key to use to toggle between Ripple and Insert, is Ctrl (on a PC, which should translate to the Cmd key on the mac). If the Ctrl key is held down, then the editing process becomes an Insert Edit.
Let us know if that works, and good luck,
Hunt
[Edit] Steve, thanks for affirming that it IS the Cmd key on the Mac.
Message was edited by: Bill Hunt

Capture video while playing audio in WP8 or WP81

Hi,
Whenever I try to record a video using the CaptureSource it stops whatever audio was playing. How do I prevent recording video from stopping the audio being played?
Thank you

Hi Baracat,
Could you explain any scenario why you want to capture the video while playing the audio? You want to record the audio played from your device to your video?
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Macbook pro stuck boots to "no bootable device found insert boot disk and press any key macbook," and at the same time, booting to the Startup Manager (holding option while booting) will not work either.

Not only will holding Option while booting not work, but all of the other boot tricks (safe mode, single user mode, etc), will not work. I am at a loss. I also don't have an optical drive in this particular MBP. I have an SSD where it once was.

I know you have tried other booting types, but have you tried booting into recovery mode? Cmd+R or internet recovery? By any chance have you recently deleted/resized/changed format to a partition? Even if it was not the main one? Have you installed third party applications that could have messed up your system files? Or some sort of RAID software, Fusion Drive etc.? All of this info will help us to pinpoint your issue quicker and help you. Any change you noticed before this happened (even if it seems small), that you consider worth telling us would be greatly appreciated.
Also, do you have access to another Mac besides this one(preferably)? Or do you have access to a Windows computer (7 or 8 preferably)?
Do you hear the chime before the message appears?

Embedding .mov video - followed all steps - not working!

I followed the steps, and it's not working.
I selected the space where I want it. Clicked "insert" "media" "plugin". Chose my .mov video from my root media folder - things looked good to me.
On properties changed the width and height. There is a lovely empty box on the page!
I am not sure what exactly needs to go in the Url. space (in properties).
One site says - http://www.apple.com/quicktime. for those users that don't have it - another linked to a web page I did not understand.
This is a Windows file .mov, so I am assuming it does not need the Mark of the Web - please correct me if I'm wrong.
Can anyone see what is wrong. Ppl make it look so easy - follow the steps and it just plays - Brilliant!!! - why NOT FOR ME?
Thanks a million.

Do not use .mov files. Very few people have QuickTime / browser plugins to support this file type. The universal standard now is HTML5 <video> with OGV, WEBM and MP4 files. No players or special plugins required to view it. And it works in all web devices!
Copy & paste the following HTML5 code into a new, blank document. Save and preview in browsers.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 with Video</title>


</head>
<style>
video {
    max-width:100%;
    display:block;
    margin:0 auto;
</style>
<body>
<h2>Use 3 File Types to support all browsers & mobile devices: MP4, WEBM and OGV.</h2>
<h3>Online Video Converter
http://video.online-convert.com/</h3>

<video controls poster="Your_poster_image.jpg">

<source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm">
<source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg">
<source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4">
If you're seeing this, you're using an
outdated browser that doesn't support
the video tag. </video>

</body>
</html>
Nancy O.

Some Videos and Games Do Not Work, Mac Snow Leopard

This is a problem I have actually had for a while, but it never really affected much that I considered important. Now it is just getting annoying.
Basically, certain video players and online games do not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the most recent video I have had trouble with is the Nickelodeon video player for The Legend of Korra. When I try to watch that, I get a black box, and a “Loading” type image pops up, swirls around once, and then disappears. After that, the whole thing becomes unresponsive. This is typical of many, but not all, video players I have encountered on the web.
I am not sure if it is related, but I have also had trouble with various games. Often time, they will work fine until reaching some transition point, such as the end of a level, and then they will become unresponsive. A good example here is the game Bloons Tower Defense 4. This is a game I know was responsive on my older system. But now, when it loads the level, it freezes up before loading the available towers to place and becomes otherwise unresponsive.An example is shown below. The top-left question mark box in the right-hand sidebar should reveal a dart monkey, and my starting money should be filled, but instead the game hangs up. I have had similar hang-ups on a number of games, so I am certain the problem is not just with this game.
As I said, I have had this problem for a while now. I have upgraded both Flash and my browsers a number of times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), so it seems to be a problem with Flash. I have also tried uninstalling and re-installing flash and disabling all other browser plug-ins.
I am using a MacBook Pro with Macintosh OS X 10.6.8 Snow Leopard, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current Browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2, Safari 5.1.5
Any ideas what I could be overlooking?

Hey, it is getting them to work. Although I still have the “URL Not Found” error on BTD, and I get a whole different debugger error on Korra. But none of the errors prevent the associated items from working. Hopefully this will work in the other places I have had trouble with.
Anyway, the new error for Korra was:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://pixel.quantserve.com/api/segments.xml?a=p-94wNw88f65Rhk
    at com.mtvnet.reporting.agents::QuantcastReporter/sendDemoData()
    at com.mtvnet.reporting.agents::QuantcastReporter/onCustomData()
    at org.osflash.signals::Signal/dispatch()
    at com.mtvnet.reporting::ReportingManager/dispatch()
    at com.mtvnet.reporting::ReportingManager/onCustomData()
    at com.mtvnet.mediaplayer.view::ReportingMediator/onRegister()
    at org.puremvc.as3.multicore.core::View/registerMediator()
    at org.puremvc.as3.multicore.patterns.facade::Facade/registerMediator()
    at com.mtvnet.mediaplayer::ApplicationFacade/registerMediator()
    at com.mtvnet.mediaplayer.command::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.command::InitializeCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.model::ConfigLoader/onReady()
    at com.mtvnet.mediaplayer.model::ConfigLoader/set xml()
    at com.mtvnet.mediaplayer.command::LoadConfigCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnet.mediaplayer::ApplicationFacade/startup()
    at com.mtvnet.mediaplayer::MediaPlayerController/onAddedToStage()
    at com.mtvnet.mediaplayer::MediaPlayerController/initialize()
    at com.mtvnservices.media.as3player.view.mediator::MediaPlayerMediator/initPlayer()
    at com.mtvnservices.media.as3player.controller::InitPlayerCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnservices.media.as3player.controller::ViewPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnservices.media.as3player.controller::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at ConfigLoaderProxy/onConfigLoad()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()

Capturing video via Firewire does not work on CS6

I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?

Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK

Paste over at playhead to insert video while retaining audio not working

Similar Messages

Maybe you are looking for