Paste & Paste in Place problem

Hi there,
Recently i have these problem in the following description:
1- Create a new documet.
2- Draw a recangle frame on a page.
3- Copy the frame, and when i go to the other page on the same document the paste command is grayed.
Another problem:
1- Copy empty rectangle frame
2-  Go to other page, when i paste the frame is filled with a content (fake content)
Also when i copy an item and try to paste it in place command it's not paste in same place.
I tried troube shooting
http://forums.adobe.com/thread/526990
but there's no solution
I tried Creative Suite Cleaner and reinstall and install indesign but all of these it's not solve the problem.
Indesign CS6 8.0.1
Windows 64bit

Ahem; yes…
Sometimes I should read more carefully.
In the meantime I could have a look at Shlomit's InDesign document.
I think, what he is seeing is not related to the OP's problem, but an issue in itself I can already observe in InDesign CS3.
Something "bad" will happen to the positioning of objects copied from master spreads by "Paste In Place", if the overall width of all pages left from spine is not equal to the overall width of pages right from spine. The pasted (in place) objects will move by half of the value the overall page widths will differ.
Either in positive x-direction, if the violation of symmetry (the wider side) is on the left side of the spine, or in negative x-direction, if the violation of symmetry is on the right side of the spine. It's not important, if the binding is LTR or RTL.
Still I have to test a bit, to see if that hypothesis is sustainable…
What is working alright:
Overriding or detaching objects from the applied master pages.
That will work without seeing a shift.
Uwe

Similar Messages

  • I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    I'm trying to purchase printable ITunes cards -- which I've done in the past...no problem. Now a message reads: this Apple ID does not support this purchase....or something to that effect. What do I do?

    First of all, I think you are confused by something.
    You don't print cards. You print Certificates. So which item are we dealing with here first of all?
    Also, you can't buy gifts with just Store Credit, so do you have a linked CC?

  • How do I get past the Error: 16 problem?

    How do I get past the Error: 16 problem? I've about had it,with Adobe products!

    2014/6/17 下午11:34 於 "Rave" <[email protected]> 寫道：
        How do I get past the Error: 16 problem?  created by Rave
    <https://forums.adobe.com/people/Rave> in *Acrobat Installation & Update
    Issues* - View the full discussion
    <https://forums.adobe.com/message/6465541#6465541>

  • HTML Help window placement problem

    Hi -
    We just upgraded to R7 from X5. It seems that now, for our
    newly generated Help, the HTML Help viewer will not right-align.
    Even if I specify the maximum width in the Window Properties
    dialog, when generated, the window only extends about 4/5 of the
    available screen width and is LEFT aligned.
    Our screens are 1024 x 768 and RoboHelp seems to understand
    this because if I max out the window size in the Window Properties
    dialog, the height shown = 767 and width = 1019.
    Is anyone else experiencing this placement problem?
    TIA

    Hi, Jack,
    > ... the HTML Help window properties dialog only accepts
    hard coordinates (i.e. pixels).
    > ...
    > Unless someone knows differently, for HTML Help,
    apparently you can't get the HTML
    > Help viewer to appear right-aligned for all
    screen/display configurations
    Yes, this is correct on both counts. Because of limitations
    in Microsoft's design of HTML Help, you cannot specify the
    dimensions of the help window in anything other than pixels, and
    you can only set the initial position of the window relative to the
    left and top edges of the screen.
    On the other hand, if you are calling the help file
    programmatically from an application, there may be some scope for
    controlling the position of the help window by using standard
    Windows functions. This article provides a small amount of extra
    information:
    http://helpware.net/FAR/far_faq.htm#control
    Pete

  • Faces and Places Problem

    Hello,
    maybe someone could help me (apple telephone support could not):
    Faces problem:
    I made a smart-album to sort out all the "unnamed faces". But 92 pictures have a strange behaviour. They are tagged as "unnamed" although there is no rectangle in the picture to tag. I've allready used the repair-function and deleted all cache files (telephone support advised me to do both).
    Places problem:
    another strange thing is places. I've got a few pictures which have more than one "place" tagged. I don't know how this could happen. If you take a look at the screenshot you can see that I made a smart-album with 4 different places (PLACE - IS - XY - AND - PLACE - IS .....) to demonstrate that kind of behaviour

    I've noticed that photos I had faces from iPhoto 09 are not syncing (I only had a few).
    In the manual list, the faces are not an option to select them. Tried removing and resyncing library and no avail.

  • Paste Clips In Place From Current-Time Indicator?

    Is there a way to paste clips in Premiere Pro CS5 at the current-time indicator / playhead without it jumping to the end of the clip?
    CS3 worked that way by default. CS4 introduced jumping ahead to the end of a clip when pasted.

    Thanks for your reply Bill.
    It does paste at the CTI, but then the CTI moves to the end of the pasted clip automatically. I liked it in CS3 when the CTI stayed in place.
    Mostly I use this for audio editing just to do quick fixes by dropping in silence over background noise in the video. So it was handy when the CTI stayed in place because I could play or scrub through the audio without moving the CTI back to the start of the pasted clip each time, then resize it accordingly.
    It's not a huge problem, but since it's been part of my workflow for so long it's an awkward change.

  • Copying, pasting and editing audio problem?

    hi, i have some audio tracks that i originally recorded in pro tools le
    (no plugin delay compensation if using uad's or other 3rd party plugs dont even go there by the way)
    and have exported them to logic 8 and changed the arrangment for a song.
    The problem is when i cut and paste sections of an audio track to a different part of the song, if i trim, cut, mute or pull it back it changes the part of the audio that i originally pasted it from?
    how do i stop this from happening?
    can anyone help
    thanks

    Once you've copied/pasted the new region to where you want it, select the new region and press:
    OptionCmdF
    You will then be prompted to give a new filename for the audio file. This generates a new file, which can be edited separately from the original.

  • Past posting -report updation problem

    Dear All,
    Can i post the cash sales invoice for the past date with the current document date.
    I am facing some problem in report.
    when i create the cash order i changed the pricing date and request deklivery dat to the past (the system allows me to do it), i saved the oreder the system had created the order number and generate the delivery number automatically in the back ground , then i vlo2n i change the actual PGI ,Planned PGI date, Loading date, Picking date as the past date say eg 09092009 document creation date is say today.when i did the PGI the system has posted the posting date as 090909.(fine).
    while creating the billing document the system has taken the pricing date as past 090909 because as i changed the pricing in teh sles order when saving the billing document the system posted the accounting entry on 090909.(fine).
    when i run the report MC2 and MCQ the system has not updated thesales figure happened for the cash sales,
    But when i run the same scenario for the credit (standard sales ) the system has updated the sales figure in teh said report.
    Please let me know i am i mising anything in the sales invoice or the scenario  is possible or not.
    (i checkef th update setting in LIS everything is fine ).
    Thanks ain advance
    regards
    Praveen S

    Hi,
    it looks you have missed some settings for the item category for cash sales in LIS.  Say you run the same scenario without taking the date in past but todays date, are you still facing the problem.
    cross verify your settings in update control in Logistic data warehouse
    SPRO - LIS -Logistic Data warehouse -  Updating - Settings Sales & Distribution - -
    check all the nodes our here.
    regards,
    ashish

  • Text copied from firefox does not paste right, not a problem using IE or Chrome

    Using firefox 35.0 on windows 7 64 bit, copying "vtamlst1" (first large gray area) on http://www.kicksfortso.com/User%27s%20Guide%201.5.0/KooKbooK/08/index.htm, then pasting into notepad, spacing all wrong. looks like most spaces dropped.
    Same problem observed with fc21, pasting into gedit.
    Same procedure works fine on all other browsers I've tried (especially ie and chrome).

    //VTAMLST1
    [http://stackoverflow.com/questions/3475790/copy-notepad-text-with-formatting]

  • When playing flash player based browser games I cannot copy and paste HTML , had no problems doing this with explorer

    I play a browser game, and some times we post battle out results in html in the chat section, where we copy and paste them into a new browser window to view them, this is not possible since I switched to Firefox

    Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

  • Paste text in edittext problem

    Hi All,
    I have a edittext, sometimes  I want to copy some text into this edittext, but when i enter ctrl+v, the text is paste into the document textframe. How can i solve this?
    Thanks!!!
      #targetengine "session";
      var w = new Window ("palette");
      var et=w.add ("edittext");
      et.size=[200,20];
      w.show();

    Maybe you need:
    #targetengine "session";
    var w = new Window ("palette");
    var et=w.add ("edittext");
    et.size=[200,20];
    w.onShow = function()
         w.active = true;
         et.active = true;
    w.show();
    @+
    Marc

  • Paste and Match Style problem

    Since the last Pages 09 update Paste and Match Style doesn't work as good as before.
    Often the pasted text doesn't get the color of the text at the insertion position.
    Anyone else noticed that?
    What can I do?

    You are quite correct, the option doesn't work as well as '08 ~ you can now have any colour you like as long as it is default black.:)
    The Apple Feedback link is under Pages on the menu bar.
    S.

  • TS3495 My recent blu ray purchase did not come with a digital copy disc as others have in the past, and no place in the case for one to be either, just came with instructions, so now what?

    My new blu ray disc did not come with a seperate digital download dis, now was there even a place for one inside the case, it came with instructions of how to install I tunes, then magically I would be prompted to enter the promo code and have it, no such luck, so now what?

    Have you actually followed the instructions?
    Did you enter the promo code?
    If you did, were there any error messages?

  • I am disgusted. Have created many idvds in the past. Never had problems getting full screen. My hard drive crashed and now that I installed a new one, I am not able to get full screen on my dvd. Help! It is for my parents 50th wedding anniversary.

    Does any one know how to make idvd in full screen? I have done it many times before, but its not working now.

    Unless I don't understand what you want to do, don't you just load your competed DVD in your computer, open DVD Player.app and then type Command + F to enter full screen mode?
    MtD

  • Placement problem

    SCVMM 2012 R2 update rollup 4, SAN with multiple CSV LUN, some for vm data and some dedicated to virtual cluster (with shared vhd on them). A single storage classification: single tier storage.
    In the VM templates, If I set the storage classification to single tier storage Placement will fail, trying to put VM on one of the virtual cluster CSV. Removing the storage classification will make things works.
    At present time I do not need to use storage classification (only 1 SAN in production) but I could need it in the future. Is there a way to exclude some CSVs from placement? I already edited the cluster nodes hw properties excluding some CSVs but still placement
    try to use one of that CVSs and fails.
    Any idea?
    Dario Palermo

    I simply can't get past the placement step in VM creation: all server are reported as 0 star and the rating explanation tells me: 
    "There is not enough disk space on the available volumes.
    Maximum disk space on the most appropriate volume, accounting for the host resource utilization  (in megabytes): 971 
    The virtual machine requirement (in megabytes): 81924 
    The maximum available space at the time of evaluation, after considering the virtual machine requirements (in megabytes): 971"
    On the SAN I've got four 1 GB LUNs, I can see them all in the Fabric Storage panel, 1 of them is also a CSV on the Hyper-V cluster (it contains the shared vhd I'm using for virtual cluster quorum) I'm managing with SCVMM and I suppose that's the one it's
    trying to use...
    Bye
    Dario Palermo

Maybe you are looking for