Pasting Data Failed error when linking Excel table

I get an error "data paste failed" when trying to link an Excel table to PowerPivot. I just installed Office 2010 and Powerpivot. Below is a dump from the error box.
============================
Error Message:
============================
The object does not exist or read permissions are needed.
Pasting data failed.
============================
Call Stack:
============================
   at Microsoft.AnalysisServices.Server.Refresh(IMajorObject obj, ObjectExpansion expansion)
   at Microsoft.AnalysisServices.Server.SendRefresh(IMajorObject obj, ObjectExpansion expansion)
   at Microsoft.AnalysisServices.MajorObject.Refresh(Boolean full)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.TryChangeColumnDataTypes(PushedDataInfo pushedDataInfo, PushedDataSource pushedDataSource)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTableInternal(CreateTableParameters parameters)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTableInternal(CreateTableParameters parameters)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTable(String tableName, IExcelTableDataReader excelTableReader)
   at Microsoft.AnalysisServices.Modeler.Storage.DataModelingSandbox.CreateLinkedTable(String tableName, IExcelTableDataReader excelTableReader)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.CreateLinkedTable()

Euge,
Is this still an issue?
Thank you!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Similar Messages

Data type error when linking Salesforce field to MS SQL Server field?

Hello. I'm using CR XI R2 SP4 with the Salesforce 3.0 driver. I have MS SQL 2000 SP4. I want to create a standard report that links the Salesforce Contacts table with a table in my local SQL 2000 database - the table also contains a column with the contact ID values. When I try to link using the Contact ID field, Crystal gives me an error "Data types are not compatible."
The ID column data type in my SQL database is CHAR(18). Is there a type I should use to make it work with Salesforce?
Thanks
David

Thanks for your reply. In Salesforce, ID is a special data type - I don't know what it would match in SQL. I'll have to open a case with them to see if they can tell me.

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

I get a "Short DST" failed error when running test. Laptop will not boot up. Any ideas?

I get a Short DST failed error when I ran a test. The laptop won't bootup. All I get is a black screen

Hi,
Certainly, the error code will be a Smart or Disk Self Test failure - in either case, it would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.

RFC call failed : Error when opening an RFC connection

Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Raja

hi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points

Error ODS activation - sql error when accessing a table.

Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either                                                      caught nor passed along using a RAISING clause, in the procedure <b>"UPDATE_ATAB"</b>   "(FORM)"
Since the caller of the procedure could not have expected this exception
   to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.

There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource.   You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

APEX bug:9879227 (ORA-01403: no data found error when using validations)

Hi,
We are getting the
ORA-01403: no data found error
when the APEX page has validations AND a tabular form is also present on the page.
I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
But what i want to get a confirmation on is, in which release was this bug really fixed ?
i see the release notes of 4.0.1.00.03 claiming that it is fixed
in the release.
we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
Any suggestions or work-arounds will greatly help us.
Regards,
Ramakrishnan

Ramakrishnan,
If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
{message:id=9971445}
Cheers,
Tyson Jouglet

Error when linking report to stored procedure defined with one input parm

Error when linking report to stored procedure defined with one input parameter
The report will work ok, when the parameter is removed from the stpred procedure
An unhandled win32 exception occurred in crw32.exe[4480]
Stored Proc (sql server 2005)
USE [Allegro]
GO
/****** Object: StoredProcedure [dbo].[SP_Test]    Script Date: 07/08/2009 10:42:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
Begin
select
     valuation,
     valuationtime,
     valuationmode
from valuation
where valuationmode = @valuationmode;
End;

This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.

ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE

제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------

Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK.

Getting "generic error" when linking clips. Generic not a helpful word.

Getting "generic error" when linking clips. Generic not a helpful word.

Zero information also does not allow anyone here try to help
More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

Excel as a data source - Error when trying to create new univerise

Hello,
Running BO 4 Server (On Server Machine) and Client tools 4 (on my local laptop) . I have tried the following..
Succesfully
1. With the information tool Created a project
2. Created a connection to a excel file on a network drive as a source
2. Published connection, created short cuts
3. Created data foundation
4. Creeated Business layers
5. Linked all tables inserted summary etc (data can be viewed in the viewer)
I publish everything above to the repository and everthing works perfectly.
I have created the ODBC links to the excel file both on my local laptop and server using the 32 bit admin tool (ODBC) in windows.
Current Issue
When i log into the BI Launch pad and open web intellgence, i try to create new and use the univerise i have published. I receieve the following error.
The dataSource cannot be generated for the specified dataSource name "zEmptyBusiness_Layer". (WIS 00000)
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: The dataSource cannot be generated for the specified dataSource name "zEmptyBusiness_Layer".
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
     at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
     at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
     at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
     at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
     at com.sap.sl.sdk.datasource.strategy.BuiltInDataSourceStrategyImpl.addDataProvider(BuiltInDataSourceStrategyImpl.java:99)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:77)
     at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:60)
     at com.sap.webi.ui.context.managers.DataManager.addDataProviderFromDataSourceInfo(DataManager.java:382)
     at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:106)
     at com.sap.webi.ui.tasks.workflows.AddDataProviderUITask.doIt(AddDataProviderUITask.java:19)
     at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
     at javax.swing.SwingWorker$1.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at javax.swing.SwingWorker.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.businessobjects.sdk.core.server.ServerException: The dataSource cannot be generated for the specified dataSource name "zEmptyBusiness_Layer".
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
     at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
     ... 18 more
any help at all would be much appreciated

Hi ,
Go to : Control Panel - > Add / Remove Programs (or "Programs and Features" on win7)
looks for : SAP BusinessObjects BI Platform 4.0 Client Tool   <- that's the base install
now look for an entry called   SAP BusinessObjects BI Platform 4.0 Client Tools SP2 Patch2.8
these are not automatic updates, it would require an installer be launched on your PC.
Regards,
H

Opening an Excel 2003 file in Office 2010 Universal Data Connection error when opening the file from a domain.

Hi.
One of my users are having problem with old accounting files in Excel 2003 when opening Excel 2010.
The user experience that linked information is not being updated properly.
And suspects that it something do with Universal Data Connection .
How can an Excel 2003 spread sheet be converted to Excel 2010 spread sheet and still contain active links?
When the user is opening and converting the file as mention in your suggestion, on the common share on a common domain, the links "breaks".
we are not using SharePoint on our domain.
But when doing it on a local machine, the links does not "breaks".
Looking forward to get solved to this problem.
Thank you in advance.
Rgds

it sounds link, the links changed from relative paths to absolute path. You need to use absolute path in original file.
KR

Pasting Data Failed error when linking Excel table

Similar Messages

Maybe you are looking for